I recently changed my system from Ubuntu/Suse to Fedora14. Starting Ardour2 or Ardour3 (both build from SVN) or Ardour from the Repo-Package I get this:
[code]...
Ardours Dev Paul Davis thinks, this is an issue with libxml2 but upgrading libxml2 and even downgrading it did not work either. With the fresh install of Fed14 2 weeks ago the Package from the repo did work very much OK. is there anything I can do?
I installed ardour on my F11 box, and both jack1 (0.xx, in /usr/bin) and jack2( 1.9.5, in /usr/local/bin/). Now when I try to start ardour, it balks about being unable to start jack. On the ardour settings page, I tried changing the JACK server path field from /usr/local/bin to /usr/bin, to no avail.
On the cmdline, here's what I get when I run, manually jack1 and jack2:
JACK1:
[root@localhost yati]# /usr/bin/jackd
jackd 0.118.0
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with absolutely No Warranty
This is free software, and you are welcome to redistribute it
under certain conditions; see the file copying for details .....
That prompts me to think that JACK1 is fine... but still ardour won't start up.
I just installed the Ubuntu Studio packages on "normal" Ubuntu, 10.04 -
[code]...
I'm trying to run this on a Dell Mini 10v netbook.
i have been trying to set zoneminder on fedora 12, after all setup. i see black screen on monitor. pasting the error below.
[Tue Dec 29 23:28:40 2009] [error] [client 117.192.6.17] PHP Deprecated: Function ereg() is deprecated in /usr/share/zoneminder/www/includes/functions.php on line 808, referer: http://192.168.2.2:8080/zm/
[Tue Dec 29 23:28:40 2009] [error] [client 117.192.6.17] PHP Deprecated: Function
[Code]....
I am running fedora 10 and webmin squid proxy server, after power failure the squid fails to start. i have tried to start it from command line but failed
[root@ ~]# /etc/init.d/squid start
Starting squid: .................... [FAILED]
[root@ ~]# /etc/init.d/squid reload
[code]....
on the risk of starting another OO thread I would like to share my problem to resolve it... (found this 'challenge' nowhere on the forum) installed openoffice apps on my F11 64-bit box through add/remove software until some time ago everything worked well for all users now with one specific user OO hangs upon startup when opening a file (only displaying splash screen, nothing further). this user is nowhere blocked intentionally
to resolve I did:tried other users, all works well (starting from menu, opening files in Nautilus by double-click) renamed ~/.openoffice.org to ~/.openoffice.org.bak so new prefs are created, but new attempt results the same (freeze upon start) copied ~/.openoffice.org from well-run user, but new attempt results the same (freeze upon start)
installed gnumeric as an alternative but I like to bring this to a happy ending.giving enough eyeballs the solution must be out here somewhere
I updated Fedora 12 a couple of weeks ago, and Amarok stopped working. The splash screen came up, and hung there until clicked on. Looking at the process, it uses 49-50% CPU (weird since it's on an Acer One netbook with an Atom N270 single core processor) and the memory footprint steadily increases. I hung on for another update to see if that fixed it, but one came through today with an update to Amarok, but it is still broken.
View 2 Replies View RelatedI'm using Fedora 14 / KDE and I'm having problems trying to start the Speech Dispatcher.I get the fallowing from the logs:Code:error while loading shared libraries: libsdaudio.so.2: cannot open shared object file: No such file or directory
View 1 Replies View RelatedI recently upgraded to Fedora 14, and was surprised to find that OpenOffice is not included in the distro like it was in previous versions. Anyways after installing it it was working until while ago when I downloaded the recommended updates, and now when I try to start it, nothing happens.
View 2 Replies View RelatedI have been using F13 Gnome desktop for a few mouths now but for some reason it won't start X anymore. I get this:
[Code]....
giving up. xinit: No such file or directory (errno 2): unable to connect to X server xinit: No such process (errno 3): Server error. Don't knoiw what has changed? But I would like to get it fixed. I have installed F13 on another partition and it works OK.
Previously mysql was fine under FC14. Upgraded to FC15 64bit
System:
IntelPentium(R) Dual CPU T3400 @ 2.16GHz 2
uname -r -v
2.6.38.8-35.fc15.x86_64 #1 SMP Wed Jul 6 13:58:54 UTC 2011
Mysql would not start when I tried to use it. Failed with
Quote:
service mysqld start
Starting mysqld (via systemctl): Job failed. See system logs and 'systemctl status' for details.
Problem was these two lines in my /etc/my.cnf
Quote:
#default-character-set=utf8
#default-collation=utf8_general_ci
As you can see these are now commented out.
Result
Quote:
[root@centos etc]# service mysqld start
Starting mysqld (via systemctl): [ OK ]
or how to relate that I want them to be utf8 in the conf file,
I just updated my Fedora 10 installation with the latest NetworkManager (NetworkManager-0.7.0.99-4.git20090324.fc10.i386) and now my NetworkManager fails to start. The output in the /var/log/messages is
[code]...
Ejabberd fails to start in f-12. ejabberd-2.0.5-9.fc12.i686. This ran fine in f-10 and f-11. Getting a large number of strange error messages from the ejabberd log code...
Looks like it may be a permissions problem.
Anybody from the ejabberd community here that has gotten ejabberd to work on f-12?
I'm completely stumped by a problem with httpd in Fedora 13. It fails to start on boot: I can see: Starting htpd: FAILED, in /var/log/boot.log, but I can't find anything else in messages, audit.log or anywhere else that gives me any clue why. The weird thing is that running:
run_init service httpd start
after boot _works_ and the server runs fine, but even when it's running OK,
service httpd status
reports
httpd dead but subsys locked
I'm guessing that the problem somehow relates to selinux, but I can't find anything in the audit logs that gives me a clue. How to turn on more logging so that I can get closer to the problem. I finally discovered the cause. This system was originally configured to use network services directly, without NetworkManager. It had been upgraded a number of times since installation. It seems that over time, if you have turned off NetworkManager, the defaults have changed. Used to be that the network services was 'enabled' by default (hence started at run time). Now, the default is 'disabled'. Httpd couldn't start because there was no network to start on. Enabling network services at boot time fixed this. I guess I should have noticed this. But one might think that httpd failing to start because of the lack of a network might at least give a warning message in the logs about the reason.
I have fedora 10 installed and when my monitor is turned off the X session fails to start because it can not probe for settings. Is there a way to hard code the settings for x instead of letting them assign dynamically on boot?
View 1 Replies View RelatedI recently made a custom spin of fedora on 29th August 2009. It initially failed to go past the slash screen but a solution was found here on fedora forum. It included adding the following to kernel line in grub.
enforcing=0
I later checked SElinux and found the option to do a filesystem relabel at next boot was enabled. I rebooted the system without adding the above words "enforcing=o" and it got stuck after the the splash screen (the blue screen with a fedora bubble). I then did some more research on SElinux and filesystem relabelling. There were several comments that said that a notice is given in the event of a filesystem relabel. I went to the konsole and as root I wrote the following commands:
touch /.autorelabel
reboot
I gave my pc 20Hrs 48min and nothing happened. My HDD is 80GB but it only had 7.5GB of data. There were no messages that indicated that the filesystem relabel was in progress or even if it had started. I also tried the following command but failed:
make relabel
I have now had to edit grub.conf and added the words "enforcing=0" as it is the only way the system will go passed the splash screen.
Arpwatch is failing to start at boot time. I got this message:
arpwatch: bad interface eth0: eth0: no ipv4 address assigned
Once I login into my account, I can (as root) run the arpwatch demon, but it is suppose to run at boot time. After I installed aprwatch, it was working correctly. I do not have an idea of what happens or since when the problem start to happen. I just realize, after a while , that arpwatch was not running. I am running Fedora 12 - 2.6.32.9-67.fc12
After the 4th install The printer will at least produce a test page, but the available resolution is low, I suspect I need the gutenprint enhanced drivers, printer is a EPSON R285. Where do I find the nvidia libs so I can use the Nvidia driver for my ancient 8500 GTX. Using the package manager find nvidia shows nothing.
Are these libs held on another repo, as in other distros?, and is Acroread availble? is there a listing if the repos somewhere, I have some apps that have to be compiled and are a pig to get going, due to using those funny cut down libs that ubuntu use. When I backed up the last failing version of FC13, which hung as soon as yum was started, didn't print ect, I didn't close firefox down before copying the file. So the user config is locked, ie, you get firefox is already running, and fails to start. I found parentlock and deleted it, but but there is another lock file that needs to be removed, and I can't find it.. Anyone know the location of the lockfiles for firefox.?
After installing nvidia drivers (sudo yum install kmod-nvidia), Fedora12 (kernel 2.6.31.12/5) fails to start. To be more exact, it show the 'loading screen', and then the screen gets all scrambled. Trying to switch the ttys doesn't work either (though I can boot in runlevel 3).
I know that there might be some conflicts with nouveu, but i followed the steps from 'Fedora Nvidia Driver Install Guide' (not allowed to post URLs), so I guess nouveu isn't exactly my problem(?).
Another puzzling thing about this, is that I can boot and use FC12 from VMware. No problems there. I also tried removing/reinstalling the kmod-nvidia (and everything else nvidia related), but the problem persists.
Specs: Intel core2duo t7300, nvidia 8600m gs, 2gb ram.
PS tried nvidia installer previously, and problem was the same, so I reinstalled FC12 at that time.
HP Mini 210 x86_64
Fedora 15 latest upgrades
I was running
Code:
skype-2.2.0.25-fedora.i586.rpm
Which I downloaded from the skype website. This version worked fine. However, I did use it for a long time. I tried it last night and it didn't work. I got the following error:
Code:
Failed to lauch skype, failed to execute child process
[Code].....
I installed Ubuntu 10.10 64-bit, downloaded Adobe reader '.bin', from the terminal
It extracted and asked me for a installation location, to which i put [~]
It then finished the installation.
But when i click on the icon in the start menu or on desktop it fails to start, when i also click on a .pdf document it also fails to start!
I am using Fedora 7 for making a server. I have installed Kaspersky mail gateway solution on that. but the solution is not working. I found an error in the message log file that is Mar 30 20:29:28 srfed kernel: mailgwd[2452]: segfault at 00000008 eip 084ed6a5 esp 003340d0 error 4 It means that the process for mail gateway dropped for some reason. I need to see the memory dumps and save them for future use.
View 1 Replies View RelatedI have installed FC13 (x64) but X Server fails to start on my machine having "Intel Corporation 82G33/G31" Integrated Graphics Controller. find the attachments xorg.conf & Xorg.0.log. My smolt id is [URL]...
View 1 Replies View RelatedI am seeing this in my dmesg ouput:
Code:
compiz[3329]: segfault at 3d9786e288 ip 0000003d93c3a4b2 sp 00007fff332d0f10 error 4 in libglib-2.0.so.0.1800.4[3d93c00000+e0000]
I have an nVidia Quadro FX 570M card and I am using nVidia's 177.82 drivers:
Code:
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.82 Tue Nov 4 16:50:05 PST 2008 I believe error 4 is "Interrupted system call".
Take me through the process one step at a time. I'm running ubuntu 10.10 LXDE environment. I've got ardour 2.x
View 5 Replies View RelatedI can't run Ardour GTK2 in Ubuntu 10.04. JACK control is open, but sends error messages relating to not being able to connect to the JACK server whenever I try to press play.
Ardour says JACK is running in another user's profile, and I haven't even made it to the program yet. Error message also says audio controls could be messed up.
I'm attempting to install F11 on my desktop. I am unable to complete the installation because the X environment for anaconda fails to start and instead the installation reverts to text mode (in which I cannot seem to to a custom disk partitioning layout for the installation, which I have to be able to do). This was not a problem with the Alpha or Beta, but the preview and now the final release have both had this problem.
My system:
intel 3.16 core 2 duo
4gb ddr2 ram
dual nvidia 9800gtx+
output of lspci:
Code:
I'm trying to compile ardour 2.8.7 from source and the compile got past the dependencies and everything else fine but it stopped at one point with these errors
[code]...
I have no experience compiling python. I would not like to install from a package as the one with ubuntu is wrongly compiled and so are many others which are hosted I have heard the only way to make the problems with packaged versions stop is by compiling ardour yourself so I would still like to go ahead with it.
I got Linux just because I could run ardour. But now that I it I dont know how to use it or make it work at all. I am currently running my recording with a bass pedal that supports recording. I did get a crappy recording on the defalut sound recorder but I dont know what kind of settings I need on Ardour to make it work. The audio codec that the pedal sends as or whatever is PCM2904 Audio Codec Analog Stereo.
View 7 Replies View RelatedAfter the last -current update, I couldn't launch ardour (with the SLV2 support). I obtained the following error:
Code:
/usr/lib/ardour2/ardour-2.8.11: error while loading shared libraries: librasqal.so.2: cannot open shared object file: No such file or directory I immediately tried the quick way of creating a symbolic link into the /usr/lib folder.
[Code]....