I've just upgraded to 9.10, and mysql fails to start. When I do an /etc/init.d/mysql start, I just get * Starting MySQL database server mysqld ...fail!with no additional errors or information to say what went wrong. I saw this thread http://ubuntuforums.org/showthread.php?t=1322070 but the fix mentioned does not apply, as I don't have the #skip bsd line in my config file.
I am getting the following error when starting mysql using 'sudo /etc/init.d/mysql start':
Mar 15 16:33:56 MoodFishDev /etc/init.d/mysql[18317]: 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in Mar 15 16:33:56 MoodFishDev /etc/init.d/mysql[18317]: ^G/usr/bin/mysqladmin: connect to
Im having a major problem with mysql-server failing to install.The installation stoppes on "Running Transactions" (have tried waiting for 10 minutes). When I use Ctrl+C an error appears:error: %pre(mysql-server-5.0.77-4.el5_5.4.x86_64) scriptlet failed, signal 2 error: install: %pre scriptlet failed (2), skipping mysql-server-5.0.77-4.el5_5.4
I'm trying to move a mysql 5.1.50-community InnoDB database from one location to another.When starting the service I get:Starting MySQL.Manager of pid-file quit without updating file [FAILED]I've searched for a way to do this but I can only find people who describe what I've just done.
I've recently installed a RedHat Enterprise Linux server and am attempting to get PHP/MySQL installed on it. It cannot load the dynamic php mysql module, giving me an error (in /var/log/error_log) that reads as follows:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mysql.so' - /usr/lib/php/modules/mysql.so: undefined symbol: executor_globals in Unknown on line 0
(In fact, it fails to load ALL of the dynamic php modules, either with the "undefined symbol: executor_global" or "undefined symbol: core_globals" I DO NOT WANT to compile anything -- I want to stay with stock RedHat released software.
[root@hostname-suppressed httpd]# uname -a Linux hostname-suppressed 2.6.18-194.17.4.el5PAE #1 SMP Wed Oct 20 13:13:33 EDT 2010 i686 athlon i386 GNU/Linux [root@hostname-suppressed httpd]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.5 (Tikanga)
I cant start mysql of my server after the update. my operating system is centos. I get this error. MySQL Daemon failed to start. Starting MySQL: [FAILED]
I installed LaMp 2 days ago. First everything works; But until yesterday, I can't start anymore mysql server : it failed each time.
When I look at the status :
Code: Select allsystemctl status mysql Failed to get D-Bus connection: Erreur inconnue -1
It's like it can't generate mysqld.sock
Code: Select all/usr/bin/mysqladmin: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists!
I keep reading man and trying to find something I didn't configure correctly, but I can't find nothing.
i am using putty to connect to my server and wanted to restart mysql server. searched the internet and found thatcommand is /etc/init.d/mysqld start or stopbut it did not worked.then tried /etc/init.d/mysql stop or startthis also did not worked.
On a newly installed centos I updated mysql-* & php-* files using RPM repository, and I installed phpmyadmin. After that i tried restarting mysql and it just said: failed
Code: service mysqld start MySQL Daemon failed to start. Starting mysqld: [FAILED]
XAMPP: Couldn't start MySQL! I have Ubuntu 11.4. After downloading XAMPP, I went to my Downloads. I then went to the Folder (xampp-linux-1.7.4.tar.gz) and right clicked on it. The options window opened, and I selected "Extract Here"! after doing so a Folder called lampp appeared. The next step I did was open my Terminal and typed ( sudo nautilus / ). I pressed Enter and a window with a bunch Folders opened up. I selected, and opened the opt Folder. I then dragged the lampp Folder to the opt Folder.
The lampp Folder is now in the opt Folder. I right clicked on the lampp Folder and selected Properties, and then the Permissions tap. I set all 3 Folder access: -to- Create delete files and all 3 File access: -to- Read and write. I checked Allow executing file as program, and Apply Permissions to Enclosed Files button, then closed. I went back to Terminal and typed (sudo /opt/lampp/lampp start) and pressed Enter. Everything is working fine execpt MySQL!
Starting XAMPP for Linux 1.7.4... XAMPP: Starting Apache with SSL (and PHP5)... XAMPP: Starting MySQL... XAMPP: Couldn't start MySQL! XAMPP: Starting ProFTPD... XAMPP for Linux started.
I don't know if it makes any difference but I do have Netbeans IDE 7.0 php installed and I've only worked on html and CSS on it.
I'm trying to install ispCP and i need to start mysqld but it won't seem to start. I'm somewhat of a nooblet to linux (have a year of VPS 'experience', but nothing too fance) so bear with me.
When i run "service mysqld start" it fails with the error: "MySQL Daemon failed to start."
I ran: "tail -n 30 /var/log/mysqld.log" and this is the output;
[root@dragon575 mysql]# tail -n 30 /var/log/mysqld.log 110726 16:03:10 InnoDB: Completed initialization of buffer pool 110726 16:03:10 InnoDB: highest supported file format is Barracuda. 110726 16:03:10 InnoDB: 1.1.8 started; log sequence number 1588761 110726 16:03:10 [ERROR] Aborting
I am trying to get mysql to start at boot without any success.
The mysqld scripts works fine when run from the command line, but it does not work when i use the links created by chkconfig. I checked the boot.log and found that mysql starts but then it stops or gets shutdown. This is the log message:
Starting mysqld daemon with databases from /data/mysql [ OK ] Starting cups: [ OK ] STOPPING server from pid file /var/run/mysqld/mysqld.pid starting DenyHosts: /usr/bin/denyhosts.py --daemon --config=/usr/share/denyho sts/denyhosts.cfg 090727 04:35:47 mysqld ended
I've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.
Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.
Howver, just been trying to again to fix the problems with downgrading mysql and get:-
Since upgrading from Wheezy to Jessie I have not been able to start the MySQL-server. When I do a "systemctl start mysql" I get the following answer on the console:
Job for mysql.service failed. See 'systemctl status mysql.service' and 'journalctl -xn' for details. Entering 'systemctl status mysql.service' the answer is: ● mysql.service - LSB: Start and stop the mysql database server daemon Loaded: loaded (/etc/init.d/mysql) Active: failed (Result: exit-code) since Don 2015-06-18 18:35:41 CEST; 4min 1s ago Process: 11272 ExecStart=/etc/init.d/mysql start (code=exited, status=1/FAILURE)
syslog and hostname.err don't show any pertinent messages.
I am trying to install Koha on centos5.5. Afte installing myqsl it starts normally. But when i add following lines into my.cnf and trying to restart mysql again it says that restart is failed.
here is the lines that i add into [mysqld] section
The setup: 2 identical boxes running Fedora Core 15 2.6.38.8 kernel, 64bit that Im trying to setup in a cluster using luci.
So far: Managed to create the cluster.conf file, defined the nodes with hosts and such.
The problem: When I try to have the 2 nodes (nod1 and nod2) join the cluster via luci's web interface, I get "Starting cman: Job failed. See system logs and 'systemctl status' for details." When I check code...
Now. I know that cman service is installed. I even tried removing and reinstalling the whole thing, dependencies and all, but it just won't start and I've run out of ideas.
I did a distribution upgrade using "apt-get dist-upgrade". After rebooting, I receive a message saying "Failed to start the X Server". When I okay the prompt for more info, I see the following: GDM: Xserer not found: /usr/bin/X :0 -audit 0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7 Error: Command could not be executed! install the X server or correct GDM configuration and restart GDM.gdm[4678]: WARNING: gdm_server_spawn: Xserver not found: /usr/binX :0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7
I just did a yum upgrade (5.3 to 5.4) on one node of my three node cluster (RHCS), which did:
Rebooted to the new kernel, but cman failed to start. Rebooted back to the previous kernel, but no change, so it doesn't appear to be the kernel.... Some errors are:
On the upgraded node, the following processes are running:
Whereas on the non-upgraded node, the following processes are running:
When i try to open a connection to start querying i get this message:
Cannot Connect to Database Server Cannot start SSH tunnel manager
1 Check that mysql is running on server 127.0.0.1
2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed)
3 Check the root has rights to connect to 127.0.0.1 from your address (mysql rights define what clients can connect to the server and from which machines)
4 Make sure you are both providing a password if needed and using the correct password for 127.0.0.1 connecting from the host address you're connecting from
I have a VPS running on centos-5-x86 and mysql server went down two days ago this is my mysql server log
110602 18:28:09 mysqld started InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 110602 18:28:14 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery.
I've build a home-made small cluster built up of a master and 1 disk-less slave node.Lately it happens that the node 1 fails to start, reporting the following message:
I have a Toshiba A205 S5804 laptop that had Vista Home Premium installed. Tried to install Centos 5 (2.6.18-8-el5) and when I went through the install process, X Server failed to start so I had to go thorough the command line install. Once the install completed, it only booted to console.
The default resolution for this laptop is 1280X800 but I dont know if that is why or not. if anyone has a clue about my issue, please let me know.. I really dont want to install windows.
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code: the-matrix:~ # mysql start ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or Code: the-matrix:~ # rcmysql start Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
I installed MySQL 5 on Fedora Core 13 guest on Win Vista host. After I ran the bash script to install it: Code: groupadd mysql useradd -g mysql tar -xvf mysql-5.1.48.tar.gz cd mysql-5.1.48 CFLAGS="-O3" CXX=gcc CXXFLAGS="-O3 -felide-constructors -fno-exceptions -fno-rtti" ./configure --prefix=/usr/local/mysql --with-mysql-ldflags=all-static --with-charset=utf8 make test make
I ran the mysql but I received the error 2002 so I changed the my.cnf with medium.cnf, pointed in the file the path to the mysql.sock file and tried changing the owner of mysql.sock to the user mysql. It didn't work so in the end I gave 777 permissions (755 didn't work either). Now the error reporting when starting mysql is Code: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111).
