Ubuntu Servers :: Unable To Aptitude Install Pure-ftpd-mysql?
Jul 20, 2010I am having trouble to "aptitude install pure-ftpd-mysql" with my ubuntu server 9 version.
[Code]...
ADVERTISEMENT
Ubuntu :: Unable To Start Pure-ftpd-mysql?
Jan 8, 2010I've installed pure-ftpd.mysql V1.0.22.1 on an Ubuntu 9.10 and I'm unable to start. The comand I use to start is:
$ sudo service pure-ftpd-mysql start
Starting ftp server: Running: /usr/sbin/pure-ftpd-mysql -l mysql:/etc/pure-ftpd/db/mysql.conf -l puredb:/etc/pure-ftpd/pureftpd.pdb -l pam -O stats:/var/log/pure-ftpd/pureftpdstats.log -E -z -u 2000 -U 000:000 -8 UTF-8 -j -o -S 192.168.1.103,21 -p 58000:59000 -4 -Y 1 -D -P xx.xx.xx.xx -B
[Code].....
CentOS 5 Server :: How To Install Pure-ftpd WITHOUT Mysql
Apr 7, 2011I'm trying to install Pure-FTPd. I'm going to use it via the internal file-based userlist.The problem is, when I yum install pure-ftpd from rpmforge or CentOS.Karan.Org, I also get mysql, perl-DBI and postgresql-libs as dependencies.Since I'm not intrested in DB-based authentication, I'd strongly prefer to skip these packages.Why are these listed as dependencies, since AFAIK, they are not really dependencies? Can I force yum to skip them somehow?
View 2 Replies View RelatedUbuntu Servers :: Pure-ftpd DontResolve Being Ignored?
Apr 12, 2011I'm really confused with this one. Yesterday our FTP cluster went down, i havent yet tracked the reason but i suspect a security update killed it as automatic updates are enabled (i will be turning those off now!).
Anyway, FTP connections were receiving a 425 Sorry, Unable to resovle error message, i sound the solution to be to disable dns lookups with the DontResolve > yes option.
but for some unknown reason this is only working on my failover box! when i restart pure-ftpd on the primary box the command switch -H is missing?
i've done the same thing on both boxes by creating a file in /etc/pure-ftpd/conf called DontResolve and editing it to just read the word 'yes', been over it and checked for spelling mistakes and i cant find any reason why its ignoring the option?
Ubuntu Installation :: Remove Pure-ftpd Pure Admin - Getting A 530 Authentication Error
Mar 24, 2011I am having problems troubleshooting my pure-ftpd setup. I am always getting a 530 authentication error. I attempted to correct the problem by doing the following:
# pure-pw mkdb
# ln -s /etc/pure-ftpd/conf/PureDB /etc/pure-ftpd/auth/PureDB
# gedit /etc/pure-ftpd/conf/PAMAuthentication
[code]....
This create a new error. 421 Unable to read the indexed puredb file (or old format detected) - Try pure-pw mkdb I am getting a feeling this is getting from bad to worse. I attempted to remove pure-ftpd and pureadmin to start over again. However, it appears I cannot remove everything. I attempted the following:
apt-get remove pure-ftpd pureadmin I am not sure what this really does because I can still see the folder /etc/pure-ftpd and I cannot remove it. I could not use rm /etc/pure-ftpd because the system said it was not empty. I also tried sudo aptitude remove pure-ftpd pureadmin . Again I cannot completely remove the folder. How do I completely remove pure-ftpd and pure admin and all databases, files and folders so I have a fresh system ready to start the install again?
Software :: Pure-authd Not Passing Variables To Pure-ftpd
Feb 9, 2011I have set up pure-authd and pure-ftpd. They are both running, I have created the socket etc.
In my authentication module (a php script) for testing purposes I have done a vardump in to a file, and have realised that pure-authd is not passing on any variables (username, password of the current person trying to log in via ftp) to the PHP script.
I am sure the authentication module is working (have tested it vigorously on the command line), but after 10 hours wondering why it wouldnt work and messing about with the script, I have realised that the variables were never even getting in to the script in the first place!
I am running the processes such as this:
Everything seems as if it is working other than this. For instance, when testing the setup with a very basic auth module which doesnt require a username or password (the basic module just passes "auth_ok:1" to pure-ftpd and the user is then logged in), I can log in to the FTP server fine.
But like I say, a vardump ($argv) on my proper PHP authentication script would suggest that no username or password are being passed to it.
Server :: Unable To Configure Pure-ftpd With Puredb Database?
Aug 30, 2010I am trying to configure Pure-ftpd with authenticated users But after configuring its giving the following error"pure-ftpd: (?@?) [ERROR] Unable to start a standalone server: [Invalid argument]"
Ftp is not configured using xinetd services.kindly find the configuration file /etc/pure-ftpd/pure-ftpd.conf as the attachment dont know what mistake i am doing but unable to restart the server.
OpenSUSE Install :: Did Install Vsftpd, But Removed It And Install Pure-ftpd Instead?
Jul 18, 2010In /var/log/warn I can see :Code:Jul 18 19:29:41 Linux1 SuSEfirewall2: Warning: config 'vsftpd' not available I did install vsftpd, but I removed it and install pure-ftpd instead.
Server :: Pure-FTPD - With-uploadscript On Fedora 10
Dec 16, 2009I am running an FTP server using Pure-FTPD which was a migration from an OS-X workstation to Fedora 10 - VMware esxi.
This was done for various reasons but the reason for choosing the Pure-FTPD app was due to an easier migration.
The system has been migrated for about a month and works very well. I installed it on the server using yum install pure-ftpd, configured it and imported all the accounts [about 150 accounts] so this is all fab. however we now want to see if we can get an upload notification.
This has lead me to look at the uploadscript option in pure-ftpd. we use virtual users and the pure-pw file.
The Problem:
When we set the directive
Code:
The ftp server hangs, I cant seem to see how to get this to work, from my investigation I think the issue is that the yum install is not building the app " --with-uploadscript " i have tried to do a hand install on a test Fedora 10 VM, I downloaded pure-ftpd-1.0.27.tar.gz and unpacked it, did a ./configure --with uploadscript then a make and make install, nothing reports any errors but it doesnt seem to install anything. I can start the server from a command line but there are no config directories ? and even after creating a new user and a passwd-mkdb i cant log in to the server. but that most likely as i dont have a full configuration. but i can t find where to put the configuration files.
Ubuntu :: Pure Ftpd - 530 Authentication Error Access Denied
Mar 25, 2011I am having difficulties with Pure-FTPD. I had it working at one time. I recently had to reinstall Ubuntu 10.10 because pure-ftpd stopped working for some reason and now I have a fresh install but pure-ftpd still does not work. This is what I did to install it.
Sudo apt-get install pure-ftpd
Using the Ubuntu Spftware Center I installed PureAdmin. I then create a virtual user. Then in the terminal entered the following:
[code]...
I read somewhere that this could be a filezilla issue and to fix it I need to use active mode and use the filezilla external address [URL]... Of course I did this and the filezilla solution did not work this time. I am fairly sure it is a server issue this time.
Red Hat / Fedora :: Change Folder Permission In PURE-FTPD
Aug 11, 2010I installed pure-ftpd with Mysql in my fedora 12. In have the following value in my pure-ftpd.conf file
# Cage in every user in his home directory
ChrootEveryone yes
It was created the user folders with permission 644. But i need to change this to 775 at the time of creating the folder.
ie,
the folder was created now
-rw-r--r-- 1 peter peter 1131291 Apr 15 22:31 random-file
I need to change [ rw-r--r-- ] to [ drwxrwxr-x ] at the time of creating the folder.
Networking :: Pure-ftpd Passive Transfers Not Working?
Jun 4, 2010I have a dns-323 linux device that's running pure-ftpd with SSL/TLS authentication. Pure-ftpd is sitting behind a linksys router with IP 192.168.1.51. Pure-ftpd is configured for port 8021 and passive port range 55562-55663. The linksys router is configure to forward port 8021 and the passive port range to 192.168.1.51.
From outside my network I can connect to the ftp server using the WAN address of the router. I'm using filezilla 2.2.32 as my client and I choose FTP w/ explicit TLS (no other option will connect). The client will authenticate successfully with pure-ftpd but once it sets up the passive data connection and tries to do a LIST of the root directory, there's a timeout. I'm assuming this is because the passive data connection is not working. In pure-ftpd, I tried changing the passive address that it reports, to be the WAN address of the router, but it did not make a difference. I included the log from filezilla below.
[Code]...
Networking :: Connection From FTP Client To PURE FTPd Server Fails At MLSD
May 13, 2010I have a "friend" who hosts a couple of websites that I maintain. I have always used filezilla client to connect and update the files on the website.I lost access for a little while and he said that "The profiles had accidentally been dropped".He reinstated everything but now I cannot complete a log on session. I maintain several other websites which have the same PURE FTPd server at their end and I can connect to these OK.The delicacy of the matter is that, with no changes at my end, and my other sites working, logic suggests that something has changed at his end. I have very patiently worked through all his suggestions but to no avail.I can't suggest that he is at fault when he claims expertise in the field and I am a complete lamer when it comes to FTP.
I wonder if anyone would be kind enough to review the log on result below and see if they can throw some light on the situation for me.(I have anonymised the IP address and other information for security reasons)
Ubuntu Servers :: Can't Reinstall Mysql-server After Power Failure During Aptitude Safe-upgrade
Jun 2, 2010A week or so ago I ran an aptitude safe-upgrade and while it was updating mysql I suffered a power-failure. Now, this never really happens in Holland but of course this once it happened at the worst possible time.
I've tried a lot of different things to get mysql working again, but am running into all kinds of problems. First mysql won't shut off properly (it does startup with the computer but I can't connect to it at all) during an aptitude purge. If I kill the process mysql seems to purge properly, but I guess this is not the case because I wasn't able to install it then.
Things seem to have gone a bit more smoothly this time, however:
Code:
snek@snek-server:~$ sudo aptitude install mysql-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
Debian Installation :: Aptitude Update And Aptitude Install Aptitude?
Jul 11, 2010I am trying to upgrade an amd64 lenny system to squeeze.I've got a 2.6.32 kernel running, done aptitude update and aptitude install aptitude.When I try "aptitude safe-upgrade", it sits forever resolving dependencies.it seems to search with the resolver counting up more and more open/conflict/ whatever.I stopped it once it got over 100,000)Is it possible to get aptitude to do a safe-upgrade, perhaps using a command line option?
View 2 Replies View RelatedUbuntu Servers :: Aptitude Updates - Gives Error Unable To Locate
Sep 14, 2010New to Ubuntu not to Unix. I am having issues with aptitude updates. Gives error unable to locate. When I look for the file manually I cannot find it either. It is looking for http://us.archive.ubuntu.com/ubuntu/ lucid/main Translation-en_US. Is there a site that list all mirrors that carry the updates? I would like to find manually and adjust source.list file.
View 6 Replies View RelatedUbuntu Installation :: Unable To Install Aptitude / Resolve This?
Nov 21, 2010In Ubuntu 10.10 am trying to install Aptitude and have been through installing and un-installing but keep getting the same msg
Failed to execute child process "su-to-root" (No such file or directory)
how to resolve this issue.
Ubuntu Servers :: Setup A Ftpd With Multiuser Shares?
Sep 12, 2010I want to share a directory (and all subdirs) via an FTP service to several users. I have searched around a bit and I think it's quite confusing to set this up. I want to have access to the files too, don't want to login as root to access the files.
Should I include my account in ftpgroup and chgrp on the directory for them to be able to read?
Ubuntu Servers :: Upstart Unable To Start Mysql On 10.04
May 9, 2010mysqld not running on boot, I can start it manually with
Code:
sudo -u mysql mysqld
If I attempt to start it with Upstart I get
Code:
dom@mythbox:~$ sudo start mysql
start: Job failed to start
Ubuntu Servers :: Unable To Access Mysql Database?
Aug 15, 2010We started our project (it's a website "employee performance appraisal system") in windows by starting with some html forms and then slowlyadded php ,javascript and other stuff in windows we had no issues of insertion and retrieval of data from thedatabase.Now,we decided to shift the entire stuff to drupal the html forms along with those php files but we had 2 issues with this1. the first one was ..we created "page" for each html form and copied the html code into "page" but we didn't find where our pages are getting stored (do they get stored in mysql database that we create for drupal siter do they remain as html pages somwhere?)2.second problem was ...for admin in drupal I gave the username "root" and a password ..similarly for mysql also I gave a password.
now I used phpmyadmin and created another database called "appraisal" which is supposed to hold the data of our website.when I try to insert data into one of the tables of this database (attendance table) ,the following error occured "Attempt to connect failed access denied for user 'root'@'localhost'(using password:NO) cannot run querry insert intoattendance values('x','y')" Access denied for user 'root'@'localhost' (usingpassword:NO)Also I'm unable to access mysql as a normal user only super user can access and can we unset the password that's required to reach mysqlprompt?
Fedora Servers :: Pure-ftp Welcome Message
Nov 13, 2009I am having problems with the welcome message regarding pure-ftp, this is on Fedora 10. Pure FTP just doesnt show any ability to change the default message, its rubbish at its default gives out some details of what I am running (security risk in itself). Is there any means of being able to make a custom message?
View 4 Replies View RelatedUbuntu :: Unable To Boot - Get A Pure Black Screen With A White Prompt
Nov 14, 2010the power went off in my house for a split second but it was enough for my computer to die as such linux refuses to boot, i reinstalled ubuntu 3 times now and still nothing.. the only way i can get it to do anything regarding booting is if i have a windows xp install disc in the dvd drive. other than that, bios posts and then i get a pure black screen with a white prompt and it sits there i did however find the boot info script and ran it so here is the results:
[Code].....
Ubuntu :: Unable To Install The Mysql 5
Jan 16, 2011In my Ubuntu 10.10, following this tutorial, I don't face step 2. I mean, while installing the packets, I don't face anything related to configuration.Then, when I run a command, such a
Quote:
mysql -u root -p
, I get this error:
Quote:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
As I see in other treads,
Quote:
ps aux | grep mysqld
gives me just this output:
Quote:
1000 4508 0.0 0.0 5172 760 pts/0 S+ 19:53 0:00 grep --color=auto mysqld
Fedora :: Install Linux-ftpd-ssl 0.17 On Core 6?
Apr 28, 2010How can I install linux-ftpd-ssl 0.17 on Fedora Core 6? Do I have to set any environment variables ? I downloaded the version from [URL] and tried to compile it but it is giving many errors.
View 3 Replies View RelatedUbuntu Servers :: Install Mysql,apache And Php Through Usb?
Mar 19, 2010how i can instal mysql,apache and php through my usb. what commands do i need?
View 2 Replies View RelatedUbuntu Servers :: Can't Install Mysql-server
Jun 3, 2011i'm trying to install mysql-server on my pc. so i type this on my terminal:
Code:
sudo apt-get install mysql-server
it starts to download & install everything, but when it has to configure the server, it simply "freeze" and does nothing!
how can i solve that? i've tried to purge and reinstall, but it was no use!
Ubuntu :: Unable To Install Mysql-server On Lucid?
May 11, 2010I've tried installing mysql-server on Lucid, and I get errors that it cannot set the root password. A screenshot is attached.
I have no idea what to do. I've tried purging configuring and reinstalling. Same problem. I can't find anything in the logs.
Ubuntu Servers :: Mysql Error Stopping MySQL Database Server Mysqld?
Jun 17, 2010I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
Ubuntu Servers :: Mysql ERROR 1045 \ Trying To Allow Remote Access To Mysql?
Jan 14, 2011i was trying to allow remote access to mysql by following mysql was running perfectly until i got here :
Code:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
i changed my.cnf bind-address line to : "bind-address = 127.0.0.1" and nothing
[code]....
Ubuntu Servers :: Cannot See Qmail In Aptitude
Oct 28, 2010I am trying to install postfix but there seems to be an old install of qmail hanging on to port 25. I cannot see qmail in aptitude and I can't see any way to uninstall it.
result from:
# ps auxww | grep qmail
root 4907 0.0 0.0 3724 416 ? S 09:08 0:00 supervise qmail-qmqpd
[Code].....
It seems to be "tcpserver" which is listing on port 25.
Is there any way I can free port 25 and allow postfix to listen on it?