Ubuntu :: MySQL Not Starting When Bind-address Set To LAN?

Jun 17, 2010

I have MySQL installed on my Kubuntu 10.04 desktop machine which I use for developing web applications.First, all worked fine. But then I wanted to synchronize the database with the MySQL database on my laptop, so I had to allow connections from the LAN interface. So I addedCode:bind-address =192.168.0.100to /etc/mysql/my.cnf. This worked and the synchronization was performed. I want to do this on a regular basis so I would like to keep that line in there.The problem now is that MySQL does not start on system boot. When I start up, mysql simply is not started. There are no errors in /var/log/mysql/mysql.err or /var/log/mysql.err; these files remain empty.When I try to start it using 'sudo start mysql' I get the same result. The 'start mysql' shows up in 'ps aux', but the mysql process itself does not.Now, I found out that when I run

Code:
sudo -u mysql mysqld
The mysqld daemon does start, and the server works fine. To make matters even more strange, if I kill this

[code]....

View 2 Replies


ADVERTISEMENT

Networking :: Program To Assign Globa LIPv6 Address And Bind() To The Previously Assigned Address?

Apr 24, 2010

Consider the following program:

Code:
#include <stdio.h>
#include <stdint.h>

[code]...

View 2 Replies View Related

Networking :: Bind External IP Address To Internal IP Address?

Jun 7, 2009

I have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.

View 2 Replies View Related

Networking :: (98)Address Already In Use: Make_sock: Could Not Bind To Address [::]:443?

Oct 28, 2010

I dont know for what reason, since 2 days, I started having this message whenever I try to start httpd.I commented "Listen 443", restarted httpd started correctly. I needed to comment "listen 443" in order to be able to start httpdWhat is strange is when I do

Code:
telnet mylinux 443
it responds

[code]...

View 9 Replies View Related

Server :: 98 - Address Already In Use - Make_sock - Could Not Bind To Address - 443

Oct 26, 2010

I dont know for what reason, I started having this message whenever I try to start httpd.
I commented "Listen 443", restarted httpd started correctly.

I issued "lsof -iTCP:443", I get

Quote:

I can not understand where this come from and why. It seems that it is IPV6 protocol which is in fact not enabled on the network card.

Also, I can not find or dont know where 443 is configured apart from ssl.conf or httpd.conf

Today, I have added xrdp applications in order to be able to connect using RDP.

View 3 Replies View Related

Server :: 98 - Address Already In Use - Make_sock: Could Not Bind To Address 0.0.0.0:80

Mar 10, 2010

(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down. Unable to open logs

I am new to apache2 server i have been trying to start the server using the default httpd.conf file provided in the source code but when i give the following command sudo /usr/local/apache/bin/apachectl start i receive the above error and the server shuts down.

View 3 Replies View Related

Server :: Bind IP Address With MAC Address In Squid 3?

Jan 13, 2010

i have followed web site [URL] for MAC to IP bind but it dont work on my system

Code:

acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8

[code].....

View 3 Replies View Related

CentOS 5 :: (98)Address Already In Use: Make_sock: Could Not Bind To Address [::]:80

Feb 11, 2010

After upgrading centos from 5.3 to 5.4 I have had this error when trying to restart apache:

[root@server1 conf]# apachectl stop
httpd (no pid file) not running
[root@server1 conf]# apachectl start
(98)Address already in use: make_sock: could not bind to address [::]:80

[code]....

I did the following to resolve:

fuser -k -n tcp 80

Then I restarted apache just fine.

View 3 Replies View Related

Ubuntu Networking :: Static IP Address And The Install Configures For A DHCP Configured Address - Network Not Starting

Dec 16, 2010

Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.

So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.

My files are as follows:

View 2 Replies View Related

Ubuntu :: Mikrotik - Control Access To Bind Mac Address With Ip Address And Control The Band Width For Individual Connection

Feb 14, 2011

i have a xeon machine with ubuntu os machine specification is 3gb RAM 3 scsi hard drives each 73gb it have two ethernet cards one ethernet card is connected with adsl modem and the second is connected with LAN. now what is mikrotik doing for me is control access to bind mac adress with ip adress and control the band width for induvisual conection.

View 2 Replies View Related

General :: Mysql Not Starting After Changing Mysql Admin Password In Fedora?

Feb 19, 2010

Mysql starting problem after changing mysqladmin password.I tried all the solutions available on forums, but not solve the problem.At last I restored the mysql db backup, this make mysql service start, but till other databases not showing all tables.

View 1 Replies View Related

General :: Error When Starting BIND In Webmin

Mar 30, 2010

I just finished configuring my BIND DNS server through the Webmin interface.

When I try to start BIND, I get the following error:

Code:

This is the named.conf configuration file:

Code:

What I need to change in the file?

View 11 Replies View Related

Ubuntu Servers :: Config Bind DNS With MySQL?

Jul 15, 2010

I have searched some about Bind9 and have it installed in my server. Now I'm looking for a Tools like mysqlBind and I found unxsBind is the next version of mysqlBind (These tools help you config BIND DNS with MySQL). But the issue is: I don't know how to Install it in Ubuntu - there just say how to install with Centos.

View 2 Replies View Related

Software :: Bind:: Address Already In Use

Apr 14, 2011

writing TCP server which is listening on port 6000. as soon as client closes the connection my server should Relisten on the same port I am getting address already in use error while binding for the second time, even if i am using SO_REUSEADDR..

View 1 Replies View Related

Server :: Can't Bind To Address 0.0.0.0:80, Driving?

Jul 22, 2010

I'm using xubuntu 9.10. NOT ubuntu server. I need to install a lamp server on my box. I cannot install a new OS like ubuntu server, have to use what I got.when I run apache2, I get:

Quote:(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down Unable to open logs I've changed the port that php listens too to 8080, 81, and I get the same message but with the new port number.

I've removed and installed apache three times, read all kind of threats on the web, but cannot find the solution! it's just driving crazy.

View 3 Replies View Related

Networking :: Can't Bind Send Socket: Address Already In Use

Feb 23, 2009

I am currently trying to get a B.A.T.M.A.N mesh network up and running. the thing uses UDP port 4305 for broadcasting to nearby nodes and it seems this port is closed or used by something else.

now i have tried to open this port with commands like

Code:

iptables -A INPUT -p udp --dport 4305 -j ACCEPT
iptables -A OUTPUT -p udp --dport 4305 -j ACCEPT

it still gives me the same error saying the socket cannot connect.any way for me to scan that udp port, see what is blocking it and open the thing up ?

View 4 Replies View Related

General :: (Apt-Get) Bind Aptitude To Specific IP Address

Aug 5, 2011

I have vps box with debian. I have two ip addresses, but first (default) is currently unavailable. In that case there is many problem. Fortunately wget has --bind-address option so I can download. My question is how can i configure apt-get, aptitude to use specific address?

View 1 Replies View Related

General :: Bind Static IP To A MAC Address Of The Device?

Mar 16, 2011

Ubuntu was a good choice for free server O/S. I am currently downloading it. My ISP wants to bind my static IP to a MAC address of the device that will be making my connection for me. Should my server be behind my router or in front of it? I kinda wanted it to be the access point and be able to monitor the usage from all the terminals in my house. We have 4 other PC's, a laptop and a PS3. My server is a Acer Altos G530 with 3.2 Xeon Processor, 4 gb of ECC DDR,

View 7 Replies View Related

General :: Bind Local Address To Public Ip?

Mar 25, 2011

I need to publish my local webserver from my lan to access outside using internet, I have public ips provided by ISP my local webserver address is 192.168.1.5 and I want to bind this local address to a public ip (Ex: 61.8.153.212) to use it out side my lan through squid.

View 11 Replies View Related

Security :: Racoon Address Bind Failure?

Mar 11, 2010

I did not use below configuration in my racoon conf,

remote anonymous {
exchange_mode main;
lifetime time 1 hour;
proposal {
encryption_algorithm 3des;
hash_algorithm md5;

[Code]...

I've pruned your post from where you originally posted. In the future, please check the dates on threads which you're thinking about posting in. If you see they are dead (inactive for a few months or more) just let them rest in peace and start your own thread. You can always include links to reference the dead thread if you need to, as I've done here.

View 1 Replies View Related

Fedora Servers :: Mysql Driver For Bind In RPM Format?

May 14, 2011

anyone come across a mysql driver for Bind that is already in RPM format? I know there is one that you can compile, but i was just curious if anyone knew of a MAINTAINED package that does that same thing?

==Edit== While i'm at it, does anyone know of a way to have bind call a STORED PROCEDURE, instead of directly querying a table? That'd be sweet. --Or, even having bind query a php file, or a webhost, would be good... I'm going to google that one now....

==Edit== Screw the mysql driver: [URL]

how to use php to serve dns requests...

View 1 Replies View Related

Server :: Can Bind Dlz Work With The Mysql Stored Procedure

Jan 21, 2011

I have some trouble when I build a DNS server. I need use mysql stored procedure work with the bind dlz mysql driver, but failed.

dlz "Mysql zone" {
database "mysql
{host=127.0.0.1 dbname=dnsdata ssl=false}
{select domain from domains where domain='$zone$' LIMIT 1}

[code]....

View 1 Replies View Related

Ubuntu :: Ssh Permission Denied (publickey) Bind To Port 22 On 0.0.0.0 Failed: Address Already?

Jul 19, 2011

I'm trying to add a key public key for my dev box which is a vm running ubuntu natty, and I am unable to connect via ssh. I've tried rsa and dsa, as well as these commands:

exec ssh-agent bash
ssh-add ~/.ssh/id_rsa
ssh-add ~/.ssh/id_dsa

[Code]...

I think I've found the error by running sudo /usr/sbin/sshd -Dd, but I'm not sure how to fix it:

ebug1: sshd version OpenSSH_5.8p1 Debian-1ubuntu3
debug1: read PEM private key done: type RSA
debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048

[Code]...

View 3 Replies View Related

General :: (13)Permission Denied: Make_sock: Could Not Bind To Address 0.0.0.0:80

Sep 14, 2010

I want to let a regular user (not just root) restart apache on my Ubuntu machine.I was using /etc/init.d/apache2 so I figured this is what I have to set permissions for. I set the owner group for this file a group to which that user also belongs. I set the chmod to 775 but it didn't work. I then even set it to 4775 thinking this would totally make it work but it still didn't.I'm obviously giving permissions to the wrong file.

The error says:

Quote:

httpd not running, trying to start (13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs But I didn't find httpd anywhere on my machine.

View 5 Replies View Related

General :: Port Forwarding Ssh Error Bind: Address Already In Use

May 10, 2011

- I setup port forwarding of openssh :

connect 1: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22222:ip-server1:161

- Then I setup second connection

connect 2: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22223:ip-server1:3306

- Openssh waring to me "bind: address already in use"

- So I think port 22223 have had another program use,I use command:

ps aux | grep ssh /* find process id of second connection */
kill -9 <process-id-second-connection>
netstat -an | grep 22223 /*find which program use port 22223> */

- but I can't find anywhat

- Then I run again command :

connect 2: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22223:ip-server1:3306

- And I receive a error from OpenSSH :" bind: address already in use"

View 2 Replies View Related

Fedora Servers :: HTTPD Service Does Not Start - Could Not Bind To Address

Nov 17, 2010

I have one problem regarding my web server. When I am try to restart my httpd service it shows...

[root@localhost ~]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs [FAILED]
[root@localhost ~]#

View 2 Replies View Related

Programming :: Bind The Listening Socket To A Paricular Ip Address And Port?

Jun 26, 2011

I am learning network prgramming in linux in c,and try to build a server and in this server I want to bind the listening socket to a paricular Ip address and port.Bind function is showing error,I did not want to use wild card. Here is the code.

#include<stdio.h>
#include<sys/socket.h>
#include<strings.h>
#include<netinet/in.h>
#include<arpa/inet.h>
#include<string.h>

[Code]...

View 2 Replies View Related

Fedora Servers :: OpenVPN - Socket Bind Failed On Local Address

May 4, 2011

I finally got the certs to configure:
openvpn --config server.conf
Tue May 3 17:26:27 2011 OpenVPN 2.1.1 i686-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Jan 5 2010
Tue May 3 17:26:27 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Tue May 3 17:26:27 2011 Diffie-Hellman initialized with 1024 bit key
Tue May 3 17:26:27 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Tue May 3 17:26:27 2011 ROUTE default_gateway=192.168.122.1
Tue May 3 17:26:27 2011 TUN/TAP device tun0 opened
Tue May 3 17:26:27 2011 TUN/TAP TX queue length set to 100
Tue May 3 17:26:27 2011 /sbin/ip link set dev tun0 up mtu 1500
Tue May 3 17:26:27 2011 /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2
Tue May 3 17:26:27 2011 /sbin/ip route add 10.8.0.0/24 via 10.8.0.2
Tue May 3 17:26:27 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Tue May 3 17:26:27 2011 Socket Buffers: R=[114688->131072] S=[114688->131072]
Tue May 3 17:26:27 2011 UDPv4 link local (bound): [undef]:1194
Tue May 3 17:26:27 2011 UDPv4 link remote: [undef]
Tue May 3 17:26:27 2011 MULTI: multi_init called, r=256 v=256
Tue May 3 17:26:27 2011 IFCONFIG POOL: base=10.8.0.4 size=62
Tue May 3 17:26:27 2011 IFCONFIG POOL LIST
Tue May 3 17:26:27 2011 Initialization Sequence Completed

But openvpn still won't start; where to go from here.
Tue May 3 17:54:25 2011 TCP/UDP: Socket bind failed on local address 192.168.122.3:1194: Address already in use
Tue May 3 17:54:25 2011 Exiting

View 3 Replies View Related

Fedora Networking :: Establishing A Vpn Connection Using Vpnc / Error Failed To Bind To 0.0.0.0:500: Address Already In Use?

Nov 24, 2010

I am having difficulties in establishing a vpn connection using vpnc (or NetworkManaager-vpnc).

As long as the openswan IPsec daemon is running, vpnc-helper quits with the error message

Quote:

Failed to bind to 0.0.0.0:500: Address already in use
[user@computer ...]# vpnc-helper --local--port 0

If I use NetworkManager-vpnc, then establishing the connection simply fails.
Using the --local-port 0 option does not change anything.

If I stop the ipsec service (service ipsec stop) then establishing the connectiong works, both with NetworkManager-vpnc and the console tool, but apparently the network traffic is not routed via the VPN - in my case this means that I cannot access hosts within the vpn and stuff.

Funny thing is - on my notebook from where I connect via WLAN, everything works fine. With Fedora 13 everything works fine, too.

Does anybody have an idea how to enforce that the vpn connection is actually used?

View 2 Replies View Related

General :: Setup Virtual Machines To Be Servers With Bind Option Set To A Multicast Group Address Of 225.0.62.87?

Mar 28, 2010

I am in verse to test "Multicast Packet filtering".I want to setup Virtual Machines to be servers with bind option set to a multicast group address of 225.0.62.87.Then I want to configure the client VM, connecting to the multicast group address and setting the TTL as needed.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved