I will be staying at a hotel for a couple weeks that has a wired internet connection to each room. I have a Linksys WRT54G v6 wireless router and would take with me and set it up so I would have wireless in my room.
View 2 RepliesI want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
View 5 Replies View RelatedI have a Linksys WAG54G2 Router - this is set up and was working fine with Xp and my Apple I phone.I have just changed over from XP to Ubuntu, and am having difficulty in configuring wireless settings to accept UBUNTU.The hard wired Ethernet connection works fine.
View 2 Replies View RelatedSetting up a Linux router in Fedora 10. The router has an IP (192.168.1.1) for the eth0 on the internal LAN and a static registered IP for eth1 on the internet connection. All the internal LAN client PCs have gateway set to 192.168.1.1. My question is what do I set the gateway address to on eth0 and eth1 and how would I configure this in /etc/sysconfig/network?
View 2 Replies View RelatedI have an old pc that I would like to use as a headless server for my music, files, etc that I can access at work and other places outside of my network. I'm a complete noob in this department so please excuse my overwhelming ignorance. The only thing I've managed to succeed at was installing fedora 13. Two things in particular are giving me trouble: 1.)setting up my router and fedora box so that it has a static ip address and 2.)connecting to the fedora box via vncviewer on my laptop.
HERE ARE SOME QUICK SPECS THE DEVICES INVOVLED:
Fedora Box: Intel Pentium 4 2.66GHz, 1GB ram, Fedora 13
Laptop: Toshiba Satellite A505, Intel Core 2 Duo T6600 2.20GHz, 4GB ram, Windows 7 Home Premium 64-bit
Router: D-Link WBR-1310
ISP: Comcast (cable)
HERE'S WHAT I'VE DONE SO FAR:
Setting Static IP
On the fedora 13 box:
1.)Went to Network Connections and added a new connection
2.)Copied mac address from the default connection
3.)On IPv4 tab, added new address: 192.168.0.200 (this is out of the range which my router will assign automatically) netmask 255.255.255.0, set gateway to 198.168.0.1(router's ip on the network)
When I connect to this new connection web pages don't load, etc. but when I'm on the default connection I have no problems.
Connecting With Vnc Viewer
On the fedora 13 box:
1.)System -> Preferences -> Remote Desktop
2.)Under Sharing I checked "Allow other users to view your desktop" and "Allow other users to control your desktop"
3.)Under Security I unchecked "Ask you for confirmation", checked "Require the user to enter this password", and specified a password
On the router
1.)Set up port forwarding for port 5900, TCP only, to the ip address of the fedora box.
On the laptop
1.)Installed VNCViewer
2.)Went to whatsmyip(dot)org to get ip address of router
3.)Tried to connect to that address, port 5900 (ex. ##.##.##.###::5900)
4.)Connection times out everytime.
My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies View RelatedI moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
This is my basic setup:
[URL]
I don't know how to get the wireless router to connect to the other wireless router so I can use internet on my computer. How do I achieve this wireless connection?
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
I'm using a cross-over ethernet cable to connect a Desktop Windows 7 box, and a laptop running on SUSE 11.2. I want Windows to connect to the internet via the laptop's wireless interface.
View 1 Replies View Relatedis this a good combination to use with 8 GB of RAM and 2.6 GHz AMD Hex core? The power supply will be replacing a 450 watt power supply and the video card will be replacing an ATI 5750 1 GB (Which currently doesn't work without 10.9, so far) The problem with these is that it doesn't meet the AMP rating of 38A of the GTX 470.
View 1 Replies View RelatedI dual boot Windows/Fedora 11 on my Dell Latitude D830 laptop, which has an Intel PRO/Wireless 3945ABG card and I have just bought a Linksys WRT160NL wireless router. I am currently trying to set up OpenWRT linux on the router. Because of the nature of my problem I have also posted this on their forum.I am having trouble connecting to my OpenWRT install via Fedora. Things seem okay in Windows, but when I try to connect from linux my laptop locks up completely and I have to hard reboot. I previously have never had any trouble connecting to any other router with this install of Fedora.
View 3 Replies View RelatedI am currently running Fedora 10.92 on my desktop and have a linksys network card, one of the ones that uses the b43 wireless driver. Fedora sees the network card, wlan0, and driver but I can't get it to see the router and connect. I have tried to manually put in the ip,ssid, ect but to no avail. I tired starting network manager from terminal which worked for me in fedora 8 and ifconfig wlan0 up but nothing seems to work.
View 3 Replies View RelatedI have a question. I just bought an internet router which also has wireless connection and my notebook also has wireless LAN.I was able to connect the computer to the internet router very easy. But i dont know how to make it work wirelesss under fedora linux 12...i mean how should i setup the connection to the router so i will be able to have a wireless connection?
View 4 Replies View RelatedWhen fedora initially starts up, the network manager shows all the available wireless connections available to me. However, when I select my wireless connection, it will go through the loading process where it shows the two green dots and the circular moving blue streak, then it prompts me to put in the wpa password.
This is where the trouble starts...when i input my wpa password, it will proceed to attempt to connect to my network but it never succeeds in doing so--it will keep on asking me to input my wpa password. when i finally get sick of doing it over and over again, i just hit cancel instead of retrying to connect.
After i stop trying to connect, the network manager no longer shows all the available wireless networks--the list is completely empty, and i can find no way to get the list to show up again, with the exception of restarting my computer.
I am able to connect to the internet with a wired ethernet, but id like my wireless to work.
I install fedora 13 on my R50e ibm laptop and i can't connect to m y wireless router but it show up in the network-manager is there away to fix it? Or should i install wicd network-manager?But it did work in fedora 12.
View 3 Replies View RelatedI have a wireless router at home, but I usually have my laptop connected to it through an ethernet cable. It had always worked with no problems until some time last week when the wired network stopped working (but the wireless still works with no problem). At first I thought that it was some update, but no. My laptop works ok with the wired network at my office, and I also tried a different laptop at home and it didn't work. It's not the cable either, I tried a different one. I haven't changed any settings in my router.So I really don't know what's going on. I just find it weird that the router's wired networking suddenly stops working but the wireless still works fine...
View 1 Replies View RelatedI changed the network setting and caused a problem of wireless network. After I completely reinstall the OS of Fedora 13, the wireless network is still incorrect for connection to router.
View 4 Replies View RelatedI have Fedora 13 installed on my Fujitsu Siemens Laptop. I can only connect to my wireless router when the laptop is close to it. When I try using the laptop in the next room, it keeps asking for the password and eventually disconnects after 3 or 4 attempts. The wireless connection worked fine in Windows XP.
View 2 Replies View RelatedMy first problem is that when I open KNetworkManager the wireless tab is desibled,I don't know why! My laptop is HP pavilion dv6-1245DX. How to get connected to my wireless router?
View 9 Replies View RelatedI'm not going to say I'm a complete Linux newbie, but I'm not very experienced with Linux. I've been all over this website trying things out to get it working, but none of them has yielded results.
Computer Information:
-RT2860 driver in Windows 7
-HP G62
-Running Fedora 15 32-bit Gnome desktop (nothing at all installed)
how to set up wireless networks. The technical language is foreign to me. My notebook maybe described as follows:
Make and Model: SONY VAIO FW490
Processor: Intel� Core™ 2 Duo Processor P8700 (2.53GHz)
RAM: 4GB DDR2-SDRAM
Graphics card: ATI Mobility Radeon™ HD4650 graphics card with 512MB vRAM.
[code]....
It came pre-installed with Windows Vista Home Premium but now I have Fedora 11 (w/ Gnome) as the only OS. The router that I am using with an Ethernet cable connected to my laptop is a Netgear 54Mbps Wireless Router WGR614 v7 connected to a Motorola Surfboard Cable Modem. Both worked right out of the box and now I have wired Internet access. RCN is my ISP. I would like to avoid using the Ethernet cable connecting my laptop to the router.
This is what I have done so far:
1. Gone to System>Administration>Network
2. Clicked "New" then chose "Wireless connection" from the list
3. Chose Intel Corp. Wireless WiFi Link 5100 (wlan0) from list. The other option was "Other Wireless Card".
I don't know what to do after this. What should I choose in the windows entitled "Configure Wireless Connection" and "Configure Network Settings" ? I chose Ad-Hoc for mode and entered an SSID name even though I have no explanation for taking these actions. As for the other settings, I simply went with whatever was already selected. At the moment, I lose Internet access when I disconnect the Ethernet cable. I see other wireless networks when I click the network icon on the top right corner of the screen. I don't know how to make my router appear on that list if that's necessary.
I downloaded HPLIP, and I began the install process. After 'make', it prompted me to restart. Thinking that would be good, I restarted. When I logged back in I tried to print a document, and it didn't print. I don't know what to do. I tried to follow the directions at http://hplipopensource.com/hplip-web...all/index.html, and they weren't very good. How can I tell if everything is installed for the printer? Once it is installed, how do I configure it and set it up? It is a wireless printer.
View 14 Replies View RelatedI tried to setup a Ubuntu Wired Router according to the manual but found a problem.
At the end of the doc page it says:
Code:
The problem though is that I don't have a wireless connection and what do I put at the end?
It says "bridge-ports eth1 wlan0" so should I change that to "eth1" twice or just leave "wlan0" out or how do I fix this?
How can I setup pppoe over the router on Slackware current? I have setup a WAP network on the other computer through the easy setup tool that linksys provides, but it can't find the internet connection. I am using a linksys WRT54G router.
View 2 Replies View RelatedI have recently installed Fedora 10 onto my PC, dual booting with XP, and I am fairly new to linux. I have been trying to connect to my wireless network, but cannot even get Fedora to recognise my wireless adapter (Belkin N1 +MIMO). I have tried to follow a few tutorials that go through either the ndiswrapper method or by using native drivers. Because I don't have an internet connection on Fedora, I have to boot into XP to download the files for either ndiswrapper or the native drivers, rather than installing using the terminal.I downloaded the ndiswrapper RPM, and it failed because of an 'unexpected error', and when using the tarball, it could not find the makefile. The native drivers did not install because of unresolved dependencies.
View 11 Replies View RelatedI just installed Fedora again, after a long absence. I have been using XP. I am having issues setting up my wireless card Linksys WMP54G. For some reason the card has been recognized, and the interface is there. But I have tried every walk-trough known to Google, and it still won't work. I have been using the GUI tools, but they don't work. I have also been using the command line walk through, and they aren't working either. Does anyone know which files I need to set and what the process would be?
View 3 Replies View RelatedI am running
Code:
On my laptop (HPDV7), using DHCP for network access, KDE4.
I use Network Manager to manage wired and wireless connectivity.
I also have Samba server running for connectivity to Windows machines.
My router runs DD-WRT.
How do I tell this HPDV7 system to propagate a Host Name up to the router?
In the DD-WRT status screen, I see Host Name as "*" associated with the assigned IP address.
I cannot, for example, ping my HPDV7 machine from my windows machine, I assume because the router (also providing DNS for my network) does not provide the name to address translation.
I CAN ping the IP address directly, and Samba connectivity from the Windows machine to HPDV7 works.
The file
Code:
I am running a web server with a public ip that is dynamic. I am using ZoneEdit.com and my WRT54GS router to manage my dynamic ip address whenever it changes. It is working as it should.
However, the subdomains ip addresses are not changing. It still shows the old addresses versus the new address. Is it possible to set it where my subdomains address will change as well?
Right now on my router under the ddns menu, I have the host name set to domain.com. Do I need to make a wildcard?