Setting up a Linux router in Fedora 10. The router has an IP (192.168.1.1) for the eth0 on the internal LAN and a static registered IP for eth1 on the internet connection. All the internal LAN client PCs have gateway set to 192.168.1.1. My question is what do I set the gateway address to on eth0 and eth1 and how would I configure this in /etc/sysconfig/network?
View 2 Replies
I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
I have an old pc that I would like to use as a headless server for my music, files, etc that I can access at work and other places outside of my network. I'm a complete noob in this department so please excuse my overwhelming ignorance. The only thing I've managed to succeed at was installing fedora 13. Two things in particular are giving me trouble: 1.)setting up my router and fedora box so that it has a static ip address and 2.)connecting to the fedora box via vncviewer on my laptop.
HERE ARE SOME QUICK SPECS THE DEVICES INVOVLED:
Fedora Box: Intel Pentium 4 2.66GHz, 1GB ram, Fedora 13
Laptop: Toshiba Satellite A505, Intel Core 2 Duo T6600 2.20GHz, 4GB ram, Windows 7 Home Premium 64-bit
Router: D-Link WBR-1310
ISP: Comcast (cable)
HERE'S WHAT I'VE DONE SO FAR:
Setting Static IP
On the fedora 13 box:
1.)Went to Network Connections and added a new connection
2.)Copied mac address from the default connection
3.)On IPv4 tab, added new address: 192.168.0.200 (this is out of the range which my router will assign automatically) netmask 255.255.255.0, set gateway to 198.168.0.1(router's ip on the network)
When I connect to this new connection web pages don't load, etc. but when I'm on the default connection I have no problems.
Connecting With Vnc Viewer
On the fedora 13 box:
1.)System -> Preferences -> Remote Desktop
2.)Under Sharing I checked "Allow other users to view your desktop" and "Allow other users to control your desktop"
3.)Under Security I unchecked "Ask you for confirmation", checked "Require the user to enter this password", and specified a password
On the router
1.)Set up port forwarding for port 5900, TCP only, to the ip address of the fedora box.
On the laptop
1.)Installed VNCViewer
2.)Went to whatsmyip(dot)org to get ip address of router
3.)Tried to connect to that address, port 5900 (ex. ##.##.##.###::5900)
4.)Connection times out everytime.
I tried to setup a Ubuntu Wired Router according to the manual but found a problem.
At the end of the doc page it says:
Code:
The problem though is that I don't have a wireless connection and what do I put at the end?
It says "bridge-ports eth1 wlan0" so should I change that to "eth1" twice or just leave "wlan0" out or how do I fix this?
I wish to setup my spare PC as a router. I was wondering what programs, in ubuntu, I can use to monitor and change settings concerning bandwidth usage. I want to throttle down a computer in my network so what program would be good for this?
View 1 Replies View RelatedOkay, a few days ago I got a small job setting up a router for a neighbour of mine. He wanted me to set up a wireless network for him. The router he bought is a Linksys Wireless N-Router E1000. I set it up the passwords and everything. Only to find out that I couldn't connect at all to it. The main computer with a direct ethernet connection to the router was the only one that had internet. Everytime I attempt to connect wirelessly with any device, it will take extremely long time to connect, to the point where I will just quit connecting.(Example: 15 minutes of waiting, when the laptop is right next to the router)
Any ideas about what I am doing wrong here? As far as I can think of it might just be a faulty router, because the router will not implement any changes(like setting a password) I set on it. Only wired connections seem to work. the router is called a linksys wirless N-router E1000.
World of Warcraft requires that TCP Ports 1119, 1120 and 3724 are forwarded. The Blizzard Downloader requires that TCP ports 3724, 1119, 4000, 6112, 6113 and 6114 are forwarded. It can also benefit from having ports 6881 through 6999 forwarded. The World of Warcraft Voice Chat feature uses UDP Port 3724.
i use the hotspot feature to play warcraft and i am running ubuntu 10.10 ... i need to forward these ports ... any way to easily download an app to configure the phone like you would a router? its probably easy i just cant find it.
post the "perfect" tutorial for setting up a router and firewall for Ubuntu 10.10 Server 64-bit? I'm kind of a n00b when it comes to Linux, so I get really confused with some things, I have seen things on the ubuntu wiki about this... but it really confuses me =
I'm trying to setup my ubuntu sys as a router and firewall... Internet -> Ubuntu (Router) -> Switch (no DHCP on it) -> Computers I've already setup bind and dhcp3 and got those working perfectly... I've also setup Squid3 and Dansguardian for content filtering (blocking ads and such) and got them working too... I want to set it all up to be transparent, and allow the system itself to function as a powerful firewall router, giving absolutely NO issues to client computers connected, and no speed reduction at all.... I want to setup the firewall to allow all outgoing connections, but block everything incoming (stealth the network)... Forcing all http/s traffic to pass through dansguardian, then to squid...
But am very confused on how to pull this off... The system is running Ubuntu 10.10 Server 64-bit, with 4 GB of RAM, 320 GB SSD, and two 1Gb NIC cards... Sorry if I'm not very clear, I do speak english perfectly, but just kinda new to the "Linux world", I was using SONICWALL but that's getting a little too costly to my network and wanna do a free alternative... Something completely CUSTOM, not using some network security distro.
I decided to try and get my network ready for IPv6. All of my hosts are set up to do stateful autoconfig, I have radvd installed and working, and I can ping6 ipv6.google.com from my Ubuntu server. However, when one of the clients on the inside tries to ping6, no packets return and I get this message in the router's syslog:
Code:
Feb 8 17:55:17 foo kernel: [ 1344.824474] Dead loop on virtual device tun6to4, fix it urgently!
I have a Linksys WAG54G2 Router - this is set up and was working fine with Xp and my Apple I phone.I have just changed over from XP to Ubuntu, and am having difficulty in configuring wireless settings to accept UBUNTU.The hard wired Ethernet connection works fine.
View 2 Replies View RelatedI have three machines say A B and C. I want to make machine B as a router for A and C, so that the ping packets from C to A should be going via B. I have directly connected two interfaces(eth4) of A and B and similarly two interfaces(eth5) of B and C. I have even set up a route between B and C. 1. But I am not able to set a route between B and A.2. If I ping A from eth4 of B(viceversa) it works. When I ping B from eth5 of C it work but not the viceversa.3. Also, if I ping from C to A, B receives the packets, but not A.
View 3 Replies View RelatedI will be staying at a hotel for a couple weeks that has a wired internet connection to each room. I have a Linksys WRT54G v6 wireless router and would take with me and set it up so I would have wireless in my room.
View 2 Replies View RelatedSetting up desktop (9.04) behind router for remote access by latptop (9.10) I am setting up desktop (9.04) behind router for remote access by latptop (9.10). Rationale: All of my files are on my desktop HD, but I am often out of my home needing to work on my files. It is becoming labour intensive to keep track of the files I make/change and try to copy them on my non-connected desktop/laptop.
Dream: Able to remote access and modify my desktop files from my laptop (while the files remain on the desktop). Request: A simple, GUI, basic, non-technical guide how to set it up!
What I know: 1.I was going to use the 'Remote Desktop' VNC connection under System->Preferences. However, if I understand this correctly, this only secures my computer (i.e. Locks the front door of my desktop) and the data streamed between them is not encrypted.[URL]..
2.Then I need to set up my router to accept the connection from my laptop.
3.Then I will need to use SSH to secure the info sent between them. This is the bit I don't really have a good grip on.
[Code]...
could set up a firewall on my linux machine? I have is to connect my router wired to the linux machine and then from the linux machine to my main computer, and obviously routing the internet connection through the linux box as a firewall. I use a Netgear DG834G router
View 9 Replies View Relatedi must make this work with the use of virtual pc's. I have vm player and installed fedora ( the latest version ) and one xp . So i have 2 virtual pc's. I'm making it simple for start so i can add more pc's when i see that it is working. I have setup a dhcp server at the fedora virtual pc. The fedora virtual pc is like a soho router. The xp pc is getting ip from dhcp while the fedora one has a static one.
My pc is behind an adsl router. Both virtual pc's can see each other which means i have no connectivity issues.Im trying to setup a squid proxy ( transparent one ) so for example the xp pc can access porn sites and such. I used all required configuration for the squid to work and started the service. Ive also inserted with iptables the commands to forward all incoming port 80 packets to port 3128 ( the squid ). It doesnt seems to be working and i thik i know why but i dont know how to fix it.
Because the xp has a gateway at 192.168.1.1 ( the adsl router ) packets go directly to it and not to the soho router ( fedora virtual pc as i intend to do) What can i do to solve this problem ? How can i forward all packets to go to the fedora virtual pc first and then the fedora pc to forward them (if necessary) to the adsl router? PS. I used Bridged connection on the networking configutration on the vmware player ! If you also want i can post the code for squid or iptables if needed !
How can I setup pppoe over the router on Slackware current? I have setup a WAP network on the other computer through the easy setup tool that linksys provides, but it can't find the internet connection. I am using a linksys WRT54G router.
View 2 Replies View RelatedI am running
Code:
On my laptop (HPDV7), using DHCP for network access, KDE4.
I use Network Manager to manage wired and wireless connectivity.
I also have Samba server running for connectivity to Windows machines.
My router runs DD-WRT.
How do I tell this HPDV7 system to propagate a Host Name up to the router?
In the DD-WRT status screen, I see Host Name as "*" associated with the assigned IP address.
I cannot, for example, ping my HPDV7 machine from my windows machine, I assume because the router (also providing DNS for my network) does not provide the name to address translation.
I CAN ping the IP address directly, and Samba connectivity from the Windows machine to HPDV7 works.
The file
Code:
I am running a web server with a public ip that is dynamic. I am using ZoneEdit.com and my WRT54GS router to manage my dynamic ip address whenever it changes. It is working as it should.
However, the subdomains ip addresses are not changing. It still shows the old addresses versus the new address. Is it possible to set it where my subdomains address will change as well?
Right now on my router under the ddns menu, I have the host name set to domain.com. Do I need to make a wildcard?
If not should I just plug up directly into my modem?
View 2 Replies View RelatedBecause of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies View RelatedI have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
I'm going to set up a new linux router for a company, and have to set up bandwidth throttling. They have an unlimited ADSL internet connection which will be shared between 2 businesses, one being them. I will need to set it up so their connection will never be slowed down by the other business. They will both be connected to the same NIC, but will be on different subnets. How would I go about doing this?
View 2 Replies View RelatedI am setting up a cron job on my DD-WRT router to execute a WOL command, and would like to know if what I have is correct.
Format:
Execute @ 12:00 on Wed, Thur, Fri, Sat every month/Yr
0 12 * * 2345 root /usr/sbin/wol -i 192.168.1.255 00:00:00:00:00:00
So what I want to do is setup a gateway(or router, idk what Ubuntu refers to it as.). So my set up would be Modem>Server>Switch>Router. I know that I need to set up it up as a DHCP server as well. I would also like to setup it up as a firewall too. I already have two Gbit cards that are already configured. So how do I do this? I already tried one tutorial, but it was old and was for Debian. I also installed ebox, but I couldnt figure that out either.
View 1 Replies View RelatedThe problem isn't with thew new computer but with my computer running Ubuntu. The problem is that I'm having trouble getting the Internet to work. Before the router I just plug my PC straight into the modem but now with the router I can't get on the Internet. I can get a connection to the router but no Internet. I know the it is not the router because I use my PS3 and it worked fine. I spend like an hour just trying to get the connection but can't figure out the Internet problem. What I did to get the connection is copy the ip address, Mac, and etc. from the PS3. Then I made a new connection and put the data in the IPV4 settings and it got a connection but I'm not sure if I did that right or just got lucky
View 2 Replies View RelatedThese r IP provided by my ISP that i've put on Fedora 8:
WAN IP:xxx.xxx.xxx.17 (eth0)
Subnet:255.255.255.252
Gateway:xxx.xxx.xxx.18
Valid static(public) IP set of 2:
IP:xxx.xxx.xxx.147 & 148 (eth1, eth2)
Subnet:255.255.255.240
i want to run xxx.xxx.xxx.147 as a web server & xxx.xxx.xxx.148 as a ftp server. but I'm able to ping only xxx.xxx.xxx.17(WAN IP) from outside world. Can any1 tell me that how can i bring my 147 & 148 IP online without router.
I have been playing around with the Apache web server setup detailed herehttp://forums.fedoraforum.org/showthread.php?t=178660 Everything works fine locally, I'm stuck on step 5. www.whatismyip.com says my IP is 208.94.XX.XX. When I try to find my server at 208.94.XX.XX, I see a mikrotik routerOS page which looks like is part of my ISP's hardware. According to my router, the IP of it is 172.16.XX.XX.So I'm guessing my router isn't exposed to the WAN. Is there a way to connect to my server remotely? I have asked my ISP the same question via email, but they are taking their time getting back to me so I thought I could bounce this off of the Fedora Forum.
View 6 Replies View Relatedok so the router works in windows and i know the config details of it.i can see other wifi access points in the area but not my one. i have tried joining it as a "hidden network" to no avail.is there any reason why fedora would not detect my own wifi when it detects substantially weaker signals instead??
View 2 Replies View RelatedI dual boot Windows/Fedora 11 on my Dell Latitude D830 laptop, which has an Intel PRO/Wireless 3945ABG card and I have just bought a Linksys WRT160NL wireless router. I am currently trying to set up OpenWRT linux on the router. Because of the nature of my problem I have also posted this on their forum.I am having trouble connecting to my OpenWRT install via Fedora. Things seem okay in Windows, but when I try to connect from linux my laptop locks up completely and I have to hard reboot. I previously have never had any trouble connecting to any other router with this install of Fedora.
View 3 Replies View Related
