Fedora Networking :: 10.92 Doesn't See Wireless Router?
May 27, 2009
I am currently running Fedora 10.92 on my desktop and have a linksys network card, one of the ones that uses the b43 wireless driver. Fedora sees the network card, wlan0, and driver but I can't get it to see the router and connect. I have tried to manually put in the ip,ssid, ect but to no avail. I tired starting network manager from terminal which worked for me in fedora 8 and ifconfig wlan0 up but nothing seems to work.
View 3 Replies
ADVERTISEMENT
Aug 1, 2010
My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies
View Related
Jun 9, 2010
I moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
View 1 Replies
View Related
Jun 18, 2011
I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
View 1 Replies
View Related
Feb 16, 2010
I have a question. I just bought an internet router which also has wireless connection and my notebook also has wireless LAN.I was able to connect the computer to the internet router very easy. But i dont know how to make it work wirelesss under fedora linux 12...i mean how should i setup the connection to the router so i will be able to have a wireless connection?
View 4 Replies
View Related
May 5, 2010
When fedora initially starts up, the network manager shows all the available wireless connections available to me. However, when I select my wireless connection, it will go through the loading process where it shows the two green dots and the circular moving blue streak, then it prompts me to put in the wpa password.
This is where the trouble starts...when i input my wpa password, it will proceed to attempt to connect to my network but it never succeeds in doing so--it will keep on asking me to input my wpa password. when i finally get sick of doing it over and over again, i just hit cancel instead of retrying to connect.
After i stop trying to connect, the network manager no longer shows all the available wireless networks--the list is completely empty, and i can find no way to get the list to show up again, with the exception of restarting my computer.
I am able to connect to the internet with a wired ethernet, but id like my wireless to work.
View 3 Replies
View Related
Apr 24, 2010
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
View 2 Replies
View Related
Sep 17, 2009
I have a wireless router at home, but I usually have my laptop connected to it through an ethernet cable. It had always worked with no problems until some time last week when the wired network stopped working (but the wireless still works with no problem). At first I thought that it was some update, but no. My laptop works ok with the wired network at my office, and I also tried a different laptop at home and it didn't work. It's not the cable either, I tried a different one. I haven't changed any settings in my router.So I really don't know what's going on. I just find it weird that the router's wired networking suddenly stops working but the wireless still works fine...
View 1 Replies
View Related
Nov 16, 2009
I dual boot Windows/Fedora 11 on my Dell Latitude D830 laptop, which has an Intel PRO/Wireless 3945ABG card and I have just bought a Linksys WRT160NL wireless router. I am currently trying to set up OpenWRT linux on the router. Because of the nature of my problem I have also posted this on their forum.I am having trouble connecting to my OpenWRT install via Fedora. Things seem okay in Windows, but when I try to connect from linux my laptop locks up completely and I have to hard reboot. I previously have never had any trouble connecting to any other router with this install of Fedora.
View 3 Replies
View Related
Feb 16, 2009
This is my basic setup:
[URL]
I don't know how to get the wireless router to connect to the other wireless router so I can use internet on my computer. How do I achieve this wireless connection?
View 1 Replies
View Related
Nov 1, 2010
I changed the network setting and caused a problem of wireless network. After I completely reinstall the OS of Fedora 13, the wireless network is still incorrect for connection to router.
View 4 Replies
View Related
Aug 6, 2010
I have Fedora 13 installed on my Fujitsu Siemens Laptop. I can only connect to my wireless router when the laptop is close to it. When I try using the laptop in the next room, it keeps asking for the password and eventually disconnects after 3 or 4 attempts. The wireless connection worked fine in Windows XP.
View 2 Replies
View Related
May 19, 2011
Recently I have installed Fedora 14 on my other laptop. It's a dual boot with Windows 7. Everything worked perfectly fine, networking included, until my friend didn't accidently turned off the wireless by pressing a wireless button on the laptop. Since then the wireless on Fedora doesn't work. It does on Windows thought. I've tried restarting the laptop few times, but the wireless still doesn't want to work again.
View 2 Replies
View Related
Jun 26, 2011
I just installed Linux on a partition to my hard drive and now my wireless internet doesn't work.
View 2 Replies
View Related
May 5, 2011
wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
View 2 Replies
View Related
Jun 30, 2011
I installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
View 2 Replies
View Related
Jun 19, 2011
I did an inplace upgrade on my Dell Latitude X1 from Fedora 14 to 15 using dist-sync as per instructions on the website. It was not entirely smooth but I believe all the packages are now present and correct. Initially, about half the packages were still on f14 and the machine barely booted. I booted single user (nothing else was possible) and persuaded yum to fetch & install the rest.I was using wicd on 14 to connect wirelessly and it "just worked". I used wicd because I found NetworkManager didn't work.
On upgrade to 15, wicd now fails, and NetworkManager still does.icd i get an authentication failure, though the pw is correct. The only clue in the logs I can see is that wicd complains of not finding python-iwscan, and doesn't seem happy in using dhclient. Of course p-iwscan isn't in Fedora. Is p-iwlib similar? For wlassistant onnect failed.NetworkManager is currently refusing to acknowledge the existence of wireless on the machine, though occasionally it has addmitted the possibility. Then however I can neither scan for an SSID nor enter one manually ** Using iwconfig and setting the key manually *appears* to connect to the AP, but dhclient won't get IP data for it (if I ask nicely, it appears to try but isn't transmitting anything)The wireless card is an Intel ipw2200 chipset built into the X1. The ethernet port is working ok now, using a Broadcom chip.
View 5 Replies
View Related
Aug 31, 2011
I have been struggling to get FC15 to act as an IPv6 router for a while now, am sure I am missing something trivial.. The idea is that I have a ppp / adsl connection (this works fine), use the wireless card on my pc with hostapd and dhcpd to provide connections to other pcs (works fine), and radvd to delegate ipv6 addresses.
The issue seem to be that as soon as I turn on ipv6 forwarding (net.ipv6.conf.all.forwarding =1), the ppp connection no longer gets an IPv6 address. This means the router cannot ping any ipv6 address outside my network.
If I disable ipv6 routing, my router gets an IPv6 address on its ppp connection, and can ping things such as ipv6.google.com just fine, however (of course) no packets are forwarded from my network and radvd complains that forwarding is disabled.
View 1 Replies
View Related
Oct 16, 2010
I bought a switch, connected it to our router,and moved the patch cords to the switch. All but one of the workstations connect & work fine. If I plug the non-connecting wire into my laptop it connects. If I plug the non-connecting wire back into the router,the workstation connects.So...it seems that this particular workstation will only see the address of the old router. It's stuck in there & won't refresh. Two of the PC's & the laptop are running 10.04 (Mint 9 Actually), and one has Windows XP on it.e problem is with one of the 3 10.04 boxesI have tried removing the power cord & MB battery and leaving them out over night.Also cleared the bios. Same results. Connects fine to the old router but will not connect to the new switch.
View 9 Replies
View Related
Apr 7, 2010
My router doesn't support IPv6. I'm wondering could IPv6 support be provided by just upgrading the firmware? I thought it was just a protocol. Also how does not having IPv6 support affect home users?
View 3 Replies
View Related
Dec 15, 2009
I'm using this card on a Toshiba Tecra M3 laptop. Firmware is installed. iwconfig shows the following:
Code:
eth1 radio off ESSID:off/any
Mode:Managed Channel:0 Access Point: Not-Associated
[code]...
View 2 Replies
View Related
Jan 22, 2010
I have a dell d800 laptop using a hp 802abg nic and it doesn't properly initialize until gnome desktop is loadedI'm using 128 bit key and a hidden network name.I would like to have wireless networking running before /etc/rc.local is executed at boot time to connect to nfs shares.after gnome is loaded and I login to user account, wireless networking starts and connects.When I set inittab to 3 and boot machine, ifconfig and iwcfg report card doesn't exist, when I then telinit 5 and start x/gnome card gets properly setupis it possible the card doesn't get initialize3ed because the network key needs to be entered in a file somewhere that the boot sequence can access it and init the card properly?
View 7 Replies
View Related
Sep 12, 2009
For the background, I'll be using my router as a firewall with snort-inline enabled. I got 3 NIC's: one for the WAN, the second will be bridged to the WAN NIC for queuing traffic which snort-inline requires, and the third is the LAN NIC (the computer I use for everyday work). Here's how I have my interfaces set up:
Code:
# /etc/network/interfaces
# Loopback interface
auto lo
iface lo inet loopback
[code]....
From what I understand, queuing needs to be set up on the bridge. From the documentation I've read it's done like this:
Code:
iptables -A INPUT -j QUEUE
And then to forward traffic, I did:
Code:
iptables -t nat -A POSTROUTING -o br0 -j MASQUERADE
I've done this and am able to ping the router, obtain a DNS address from dnsmasq from the LAN computer. From the router I am able to connect to the internet (ping, links <address>...). From the LAN computer trafficking isn't getting forwarded, Firefox, links, ping all don't resolve.
View 7 Replies
View Related
Nov 15, 2009
I've currently got the beta of fedora 12 installed, hope to upgrade that once the final release comes out. I'm having so many problems getting wireless to work. I've got a edimax ew-7711utn wireless adaptor. It doesn't work. Really what I want is to take it back and get a wireless card that will work.
View 6 Replies
View Related
Sep 7, 2011
I installed Fedora 15 64 bits version on my desktop, and I'm having hardtime activating my wireless card.
I tried following the instructions from this thread without success [url]
Here are the logs of some of the commands I used
lspci output
Code:
iwcconfig
Code:
Code:
View 1 Replies
View Related
Jul 17, 2009
I am a convert from Ubuntu (9.04 kept freezing on my laptop; when it did work, many packages it seemed were outdated--ie only Eclipse 3.2, rdesktop was messed up [and apparently is also in Fedora]), and I am having some trouble with getting my wireless working.I am running Fedora 11.First off, there is a problem when trying to connect when using DHCP. NetworkManager gets to the second green dot, and then after a short while I am given a message that the connection was disconnected.
Configuring the interface manually, not using DHCP, allows the connection to complete. However, the internet is very slow. There is a 15-30 sec delay before website loading actually commences, and then another delay each time an ad must be fetched from another server.How can I fix this delay? I know I have encountered it in earlier versions of Ubuntu, but I can't remember how I fixed it.About the rdesktop problem, if anyone is able to help [maybe I should post another thread?], the cursor color (the color of the pointer) is inverted---where it should be white it is black, and where it should be black it is white. I use rdesktop a lot to connect to my terminal server in my basement. Any idea how to fix it?
View 5 Replies
View Related
Aug 23, 2009
I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
View 2 Replies
View Related
Aug 16, 2010
a wireless router (box) is went stuck, I found that when it is stuck it uses strange IP local address remote address 10.112.112.112, today is also went stuck but this time the gateway was 10.112.112.112. I had to switch off, switch on teh router to function properly. I am using DSL connection normally the gateway is likie that 78.8.... and my IP (dynamic) like 78.8.240..... Is there any default meaning of 10.112.112.112 in teh net connections?
View 14 Replies
View Related
May 11, 2011
I'm trying to set up a wired/wireless linux router. it wirelessly connects to a network, then is wired to the internet port on my netgear wgr614.
eth0 (wireless) is dhcp
eth1 (wired)
The router
Internet port is static
And local network
I turned forwarding on, set the iptables for masquerade and nat, but i'm not really sure what i'm doing wrong. any pc connected to the wrg614 can see the pc thats supposed to be forwarding packets but can't see any further(the other router at 192.168.1.1 or the internet).
My sources sofar are:
[url]
[url]
View 5 Replies
View Related
May 27, 2011
Current: Workstation --> Wireless Router --> Cablemodem --> InternetsIPs:192.168.2.1 --> 192.168.2.5>192.168.1.5 --> 192.168.1.1>{someIP} --> InternetsSo my first link has a Class C of 192.168.2.0. I want to add a different class C also to that firstink of 192.168.3.0. The reason is my LAN traffic will be on 192.168.2.0 and traffic will be on 192.168.3.0.The wireless router can be only set up for one LAN IP, which is 192.168.2.5. Is there some way to set up a vpn or nat or bridge or something else so I can run two class C's to the router and it will pass them along? Router is the Netgear WNDR3700.
View 2 Replies
View Related
