Fedora :: New App: SopCast Player For It And Ubuntu - Support For Japanese And Chinese
Jan 11, 2009
It features a built-in player and a channel guide with the ability to bookmark favorite channels. Currently the only available language is English, but I'm working with a few people to try and bring support for Japanese and Chinese as well. Let me know what needs improvement, and please, be honest. [URL] btw. Be sure to read the Installation notes on the website before you install.
View 14 Replies
ADVERTISEMENT
Dec 13, 2008
I just installed CentOS 5.2. I have both fonts-japanese and fonts-chinese installed. But I cannot see characters displayed correctly. All Chinese and Japanese characters are displayed as blocks of hexadecimals, except Japanese kana. How can I make them displayed correctly?
*** Appendix 1: /etc/X11/xorg.conf ***
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "CorePointer"
EndSection .....
View 13 Replies
View Related
Nov 7, 2010
I currently have sopcast player 0.4.3.1 installed on ubuntu 10.10. any advice on how to remove bookmarks.
View 2 Replies
View Related
Jun 27, 2010
I use Ubuntu Lucid Lynx. Sopcast player used to work properly, but from yesterday it does not open at all. It doesnt open when I click a link or even when I try to open from the menu.
View 9 Replies
View Related
Feb 1, 2011
getting Sopcast player working in Ubuntu, so i dont have to switch to windows?
I have installed sopcast and its there on the drop down menu, but when i click on it, it wont open.
View 2 Replies
View Related
Jun 21, 2010
from the Ubuntu PPA to the Mepis 8.5 community repo, and it works a treat. It would also be installable in Debian Lenny and higher, as long as you have VLC >= 0.9.4 for the built-in player (which is backported for Lenny in another post I had here) I also ported over the nonfree sp-auth deb package which it requires, only for Intel-base 32 and 64 bit CPUs (it's a 32 bit static binary that does the actual P2P). I could roll a Lenny specific package which does not use VLC if you tell it to use an external player such a mplayer or xine; is anyone interested?
View 9 Replies
View Related
Feb 6, 2010
scim-anthy seems to have been installed perfectly... however, ctrl-space or any other combinations that i'm use to don't activate it... i see the keyboard icon, i can go in set up the environment in it but... i can't get the japanese language bar to show up so I can type in Japanese.
View 1 Replies
View Related
Jul 17, 2011
I'm running Ubuntu Server 11.04 (no desktop installed). I'm wondering how I install the necessary support for Japanese text because I have numerous files with Japanese file names and they all show up as garble. I would also like Icecast to broadcast the proper song names with Japanese characters.
View 1 Replies
View Related
Oct 8, 2010
Ive had my server up and running for a few weeks now, everything has been good. My one small hitch is that while in the console I need to be able to see Chinese Simplified characters. I dont really need to type them, but I do need to be able to read them. How do I go about adding support for simplified chinese?
View 2 Replies
View Related
Sep 1, 2010
I've been looking for a way to add Japanese language support to Debian. I need to be able to type and read Japanese for school. I've asked my Linux professor, and he wasn't sure of how to do it... =p
Edit: I've just figured out how to do this. (All you have to do in install a Japanese font). The only problem is I can't seem how to figure out how to type using Romaji and have it convert to Kana automatically, rather than having it have a Japanese keyboard layout. For example, when I type "A", it should show up as ア, and when I enter "KA" it should show up as カ.
View 7 Replies
View Related
Nov 9, 2010
I use Ubuntu 10.10, When I click Language Support, then I click install/remove Language, I click Chinese (simplified) and Chinese (traditional). then I click apply changes. But still can not be installed. it seems, the source can not be downloaded.
View 2 Replies
View Related
Mar 24, 2010
I am a starter ,though there are lots of software installed almost for everything, I found that it is uneasy for a Chinese learner to use it.Almost every PC user prefer sip to linux around me. it is likely that there is still a long way to go.but I have every confidence in myself! one of my question is:Why my pdf reader does not support Chinese characters?What should I do to improve this situation?
View 6 Replies
View Related
Jan 17, 2011
When try to deployed squirrelmail, configured display language to "Chinese Simp" or "Chinese Trad", it could not display mail folder and reported "Reason Given: GB2312 character set is not supported." Checked locale/zh_CN[zh_TW]/LC_MESSAGES/squirrelmail.po, file charset encode is utf-8, also locale/zh_CN[zh_TW]/setup.php charset to utf-8, but at functions/i18n.php, it used charset of zh_CN/zh_TW to gb2312/big5. after changed it to utf-8, it working fine.However, all messages received is corrupted characters in chinese
Either the title is corrupted characters, or information is corrupted characters.
View 1 Replies
View Related
Jan 11, 2011
I have a RHEL5 installed in EN.I now need to test something on this platform for Japanese. If I change the language via system-config-language, not all the chars appear correctly.
View 3 Replies
View Related
Apr 13, 2011
Anybody know why there's no Linux Netflix player support? My suspicion is that this is a copy-protection (or lack thereof) issue or that, like so many others, Netflix is joined at the hip to M.S. and is preventing it.
View 9 Replies
View Related
Jun 26, 2011
Played with rythmbox and banshee. Banshee lacks basic features that are necessary, and thythmbox is VERY unstable. Cannot finish playing a song, much less a podcast. Any recommendations? Was looking at Amorok and Exaile. What others are there?
View 6 Replies
View Related
Nov 18, 2010
Can someone tell me how to install sopcast on fedora 14?
View 2 Replies
View Related
May 4, 2010
Actually I want to log a bug but I don't really know what package to log it against. The problem is that by default Pango is choosing the AR PL UMing CN as the font to render Japanese text when the current font doesn't have Japanese glyphs. But AR PL UMing CN is a Chinese font, so Chinese glyphs for kanji characters (e.g., 覚) are displayed. This is jarring and confusing for Japanese readers.
This situation mostly arises when you have mixed English and Japanese text. Some applications (for instance Firefox) will allow you to select a font for Asian text. Thus if the text contains only Asian characters it will use the font you select, rather than what Pango would have selected. But if it is a mix of English and Japanese, you end up with the wrong glyphs.
Other environments (like gnome-terminal, or a gedit) have difficulties as well. Since the primary interface requires mono spaced roman characters you run into difficulty selecting fonts. Most Japanese fonts only have proportional roman characters. This means that if use a nice roman font and use Japanese text (for instance file names), you end up with Chinese glyphs. What I want is a mechanism that will work across all of Gnome for selecting the font I want to use for Chinese characters. That way I can choose either Japanese or Chinese glyphs.
I realize this is low priority. It only bugs me a little, but many of my Japanese colleagues are put off from using Ubuntu because they are confused by the Chinese glyphs that pop up on my screen from time to time. As I said, I'd like to file a bug, but I'm not sure against what package...
View 2 Replies
View Related
Jan 14, 2010
I bought a netbook (VPC) which is basic netbook with limited features. It has a basic version of Linux (Linux 2.6.24 platform). My instruction booklet says it does not support Flash (player): Flash - The current browser does not support any Flash players. This will prevent viewing some web pages. Certain major websites have a simplified version on the server which will load up. When I try to play games in flash, it does not work either. Browsing on the web also is very limited, I only see mobile (cell phone) versions? (the instruction booklet does state this though) I cannot even put favorites? Is there a way that I can get Flash installed or a better browser? So I can play games that are on Facebook, etc.? and view websites like a "normal" human being should be viewing them on the web?
This is what I figured out so far:
Wi-Fi
Onboard USB and Ethernet ports
An SD reader
7″ TFT display with an 800X480 resolution
2GB of internal storage
100 MHz processor
Linux with preloaded programs such as internet browser, spreadsheet, word processor, a media player for movies, music and pictures, e-book reader, dictionary, calendar, PDF reader, email, chat, calculator, file manager.
View 2 Replies
View Related
Feb 12, 2010
OMG I think I have installed every MP3 player known Amorak Audacious, Bluemindo, rhythmbox, kaffiene, Listen, VL, CPlay and more. They all require a cpu supporting SSE. This isn't an audio issue it is a graphic issue.
Does anybody know an mp3 player that will run without these graphic issues?
Ubuntu 9.1 800MHZ AMD Duron (with NO SSE)(slot A with a 100mhz bus)
View 6 Replies
View Related
Aug 24, 2010
So after a little while of trying to get flash player to work in firefox on Slackware, I finally figured something out.
It took me a little bit to figure out where the firefox plugins folder was, because everything I read said in "/usr/lib/mozilla/plugins/" Well in "/usr/lib/" there was about 6 or 7 folders, nothing else. I finally realized everything was in /usr/lib64.
Now my second problem, the flash player plugin I downloaded directly from Adobe didn't work. Well a few searches fixed this, and I found a link to the 64-bit plugin at SlackBuild [url] Now I have a couple of questions. First off, Is there any resource that would help me find out exactly what the security risks that SlackBuild claims exist in the x86_64 edition of flashplayer are, so that I can take proper precautions?
Adobe says that they don't currently support 64-bit and they say you can just use a 32-bit browser. I am a bit of a newbie when it comes to 64-bit and 32-bit architectures, so I would just like to read about the advantages of using a 64-bit browser over a 32-bit, and it would help me if anyone could direct me to a website or resource all about the 64-bit and 32-bit architecture stuff.
And in conclusion: The point in me posting this is I would like to decide whether I should continue using the 64-bit firefox or switch to a 32-bit version so I can use the official version of flashplayer. I have a habit of generally preferring the default installed applications because I feel they are typically chosen for the best compatibility, and otherwise I don't feel like asking what application I should use for each and every field of applications.
For now I'll install the 32-bit version and see if I notice any differences.
View 3 Replies
View Related
Mar 11, 2010
I following evaluating Linux OS's
1. OpenSuse 11.2
2. Mandriva 2010
3. Kubuntu 9.10
4. ubuntu karmic koala
Which is the best according to you?
Main Applications
1. windows 7 comparable GUI
2. with Movie Player with .Avi / .MP4 /.MPEG /.Flv
Meanwhile what is the difference b/w Kubuntu and Ubuntu?
View 2 Replies
View Related
Feb 8, 2009
In Windows XP I used Billy Player and it would use about 4000k max of ram. I know there are tons of terminal based music players, but I would like something with Last.fm support.
View 5 Replies
View Related
Jun 1, 2010
Yesterday my Japanese input on F11x64 broke horribly. I have been using iBus all along, and didn't think I did any upgrades, but maybe there was a restart that picked up something previous. As soon as I hit the key to turn on the input method to type Japanese there would be a python process using 100% cpu, but no keyboard input. After fiddling about reinstalling python, iBus, scim and anthy and anything I else I could think of, I decided to upgrade to F13 to see if it would fix it. (trying to use scim instead of iBus hung the machine during start-up after login (I'm using KDE too if that makes any difference)). I did an upgrade instead of a fresh install fyi...
F13 is no better, and has the same issues with the python process. I have tried reinstalling everything again, as well as trying to avoid scim altogether, and just running iBus and Anthy. (The only other issue that I can think of (that prompted the initial restart) was that my .xsession-errors file in my home directory became huge -> 1.7gb!) Japanese input is crucial to my work (It doesn't even work if the default language of the system is set to Japanese), so hope someone has some ideas on how to resolve this, or even just knowing tha japanese is working for someone on a x64 KDE install would be encouraging...
View 3 Replies
View Related
May 26, 2011
I need to write in Japanese, I know that I have to use iBus, but I don't know where to find it. I only know that it is installed, do you know where can I find it? I'm using Fedora 15
View 1 Replies
View Related
Jul 21, 2009
I update system today. Just before , everything is normal. Once it finished , I found that my KDE can't display some characters. I am a Chinese user. The English words are normal,. Just some Chinese characters can't be displayed. When I refreshed the browser, they can be displayed again but some of them are font default and some of them are font Yahei. And they are displayed messed together. It is not pretty. AND it is not only in browser, anywhere displayed Chinese characters looks the same as browser. How to change them back to default font as one font not two types of font messed together?
View 1 Replies
View Related
Oct 25, 2009
We would like to type simplified Chinese characters on FC11. gcim is installed, and it is selected as input method. We see that with ctrl-space input method changes, and we can select types with ctrl-shift. However, we cannot find a "normal" simplified Chinese,. If we type "WO" it pops up with 7 possibilities, witch is not enough as it suppose to drop over 50 .
View 3 Replies
View Related
Jan 18, 2010
hope to get some lights here. I been using ibus input method forChinese characters from F11 to F12 and realised the character are not even. For example, get this maller than "你".
View 4 Replies
View Related
Dec 29, 2010
i can input chinese in vim ,gvim,gedit ,and also zsh...., but i can't input chinese in bash and sh , i use ibus.
If i login with another account , i can input chinese in bash and sh !
i also diff the locale and env between the two account ,they are nearly the same;
example: when i input chinese ""i type "wq" and space,then bash print :
Display all 4063 possibilities? (y or n)
View 1 Replies
View Related
Jun 26, 2010
I've also tried:adding the font to local .fonts directory adding font to /usr/share/fonts simply clicking on the ttf file and then 'install' (which puts it in the .fonts directory) But nothing seems to help. As I haven't yet made 15 posts, I can't post a URL, but I'm trying to add Chinese fonts from the uni-heidelberg.de site. (A search on free chinese fonts will give the URL). The only installation hiccup I've noticed is that the font name, when the ttf file is clicked on in the gnome GUI, is (for a number of fonts, not just one file). I don't think that's the problem though.
View 1 Replies
View Related
