how this is pulled off - when you click "Print" on a computer, and the result comes out of a printer connected to some other computer on a LAN, what goes on? I would like to know this at the deep *hacker* level, and also how to do this in Linux alone, i.e. without Samba or whatever - that is, without Windoze.
View 1 Replies
I have a rather ancient HP LaserJet printer that was working fine in fedora 14, but when I upgraded to Fedora 15, I can no longer get this printer to work. The printer's front panel reads "LaserJet 5P", but when I print out a test page, it's a "LaserJet 5MP". The printer is connected to my computer's parallel port, and it's capable of understanding PostScript, and I usually don't have any problems printing to it under various operating systems.
The following error comes and goes under the KDE print manager:
"Printer 'LaserJet_5P' may not be connected."
CUPS reports the following printer state:
"Processing - Printer not connected; will retry in 30 seconds..."
I have double-checked that my printer is indeed powered on and connected. And the following lines appear in the error log:
W [29/May/2011:18:03:02 -0700] no access to /System/Library/ColorSync/Profiles/sRGB Profile.icc
W [29/May/2011:18:03:02 -0700] no access to /System/Library/ColorSync/Profiles/sRGB Profile.icc
W [29/May/2011:18:03:02 -0700] no access to /System/Library/ColorSync/Profiles/Generic CMYK Profile.icc
W [29/May/2011:18:03:02 -0700] failed to CreateProfile: org.freedesktop.ColorManager.Failed:profile object path '/org/freedesktop/ColorManager/profiles/LaserJet_5P_Gray__' already exists .....
The first three warnings are regarding file paths that one would expect in an Apple OSX system. The "bad request" error is troublesome, because it indicates that either my browser or some configuration software on my system is sending garbage to CUPS. The last two errors occurred when I tried to use the KDE print configuration tool, which was not smart enough to ask me for the root password, which CUPS needs. By the way, the device URI is "parallel:/dev/lp0". Is this still the correct URI?
a newbe one, but its if my fifth try in using ubuntu for working with Architecture, so... my problem is...I have a plotter (xerox 2230ij) connected in a print server, i tryed to connect in lpt1 port and was sucessful with HP 750 plus driver... so.. yay! but my original intend is to connect in print server and all the computers (windows/ubuntu) use that.But when i connect in PS, i cant see the plotter, but i can acess the PS (Dlink)so.. what i have to do, to make thing working well? and i have virtualbox with windows XP, can XP acess that plotter as well?here a small scheme of my connections...
Code:
router -----------------------------------
| |
[code]...
Linux and I have trying to get my Fedora 15 (x86 64bit) on my laptop to print to an Epson Stylus NX515 printer/scanner. I have the printer connected to a router through a wireless connection. I have other computers that are on the network that are Windows based and they of course are printing/Scanning just fine. The printer is located in a different room. I have been searching for a solution but non that explains how to install a printer driver for one that is connected to a router wirelessly.
View 1 Replies View RelatedJust installed drivers for Lexmark pro200 - S500 series. However although it is recognised by the system and has a tick by its name, And tells me it is connected via usb file goes to print que but will not print. Also tells me it is Printing - localhost! is this correct?.
View 1 Replies View RelatedI have 2 computers, a linux and winXP , connected in a SAMBA network.
the winXP machine has a printer, and the drivers for that printer does not exist for linux.
so, how can i print to that printer from the linux machine??
samba allows me to do it in some GENERIC way? at leat in TEXT ONLY MODE??
I have an HP deskjet f4580 and I downloaded hplip and the printer prints when its plugged into the usb but not wirelessly. And I noticed an hp setup adhoc on my network connections but I couldnt get on it. I'm nearly certain its something I am missing just don't know what..? and I have Ubuntu 11.04
View 9 Replies View RelatedThe company I work for decided to use printers on which one should log in with there MS Windows password. After logging in, one could print there documents. This is ok for the MS windows office PC's, but not for the Linux based systems.The Linux user accounts have a different name than the MS Windows accounts.Because of this, it is not possible to print with that Linux user account. I can create a Linux user account with the same username as the MS Windows account, so that all users can use that account if they want to print something on the network printers. They can use it like:$ ssh <username equal to Windows>@<hostname> "oowriter <path>/<file>"
Now they can print a file from oowriter to the network printer.So my question is, is it possible to use the account name that is equal to the MS windows account name by default?
example
MS Windows account name = milk
Linux account name = schuurs
Linux account "milk" is created for printing by all users.
user works with account "schuurs" and prints with user "milk" automatically without the use of the ssh string mentioned before.
I'm using Slackware64 13.0 on a laptop. I've set up the network printer which lives on a Windows Vista machine (not my choice) in the family room. I am able to send print jobs to the printer. That part works fine, but the printer does not print. It simply stacks up print jobs with "error - printing" in the status of the first print job.I think I understand what's happening. I'm sending the print jobs to the print server as "Guest" and I have no guest account activated on the vista machine. I'm sitting here racking my brain (ie googling my goddamn fingers into stumps) trying to figure out how to send the jobs to the print server as indubitableness.
For the goddamn life of me I can't figure out what I need to do to send these print jobs as a specific user. I've tried adding "valid users = indubitableness" to smb.conf and I've tried using the -U flag when running lpadmin to add the printer to my system in the first place.The configuration wizard for windows doesn't appear to have any options to enable guest access or to add a specific remote location and/or user to the allow list.I'm at a loss and I'm losing my goddamn mind.
I have a network printer directly connected via ethernet cable to an Ubuntu netbook, but pinging the printer fails, giving "Host Unreachable". The network light on the ethernet socket is lit green, and there is nothing else cable-connected to the network - just a simple cable connection between the netbook ethernet socket and the Network printer (a HP Laserjet 4200n). Ping works fine if I plug the cable into a different machine (a Win XP box) and ping from there, so it's not a cable or IP address problem.
This sounds simple enough and should work, but I'm stumped. Clues, anyone?
I am using the script below but need to make it to show the result in a html popup window. The script is Free and I don't think Kristina will complaint by making it more versatile.
The problem I have is that the script moves to a standalone window to show the results. I am interested in making it "popup' a window with the results.
Code:
#!/usr/bin/perl
# NOTE: You must change the line above to point to the path to Perl
# on your system.
#########################################################################
##### AffordaBilly v1.0#
##### Copyright 2001, Kristina L. Pfaff-Harris, scripts@tesol.net#
[Code]....
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies View RelatedIn Ubuntu 10.10, I have my printer, an Epson D120, shared. I can print from the computer itself, but other computers cannot print to it. Both Ubuntu and Windows machines have the printer successfully installed. They can access it, I can access CUPS from all these machines and the the job queue even reports the jobs sent from these computers. But the page count is unknown and nothing is printed, although it says the job is completed.
I'm quite desperate to get this to work. It would suck if I need to go back to Windows just because some minor thing goes wrong. I really don't understand why local prints are OK, but prints from the network are not working.
xxxxxx:/etc/samba$ uname -aLinux xxxxxx 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/LinuxI have a printer shared off of Windows XP. I have always been able to print to this from Ubuntu by adding a network printer through the "Windows Printer via Samba" gui.Now, in Natty, I can set up the printer no problem but all jobs fail. In the printer properties gui I can see this text briefly: "Processing - unable to connect to cifs host".The errors in /var/log/cups/error_log are:
E [28/May/2011:14:32:31 -0700] [Job 15] Tree connect failed (NT_STATUS_BAD_NETWORK_NAME)
E [28/May/2011:14:32:31 -0700] [Job 15] Tree connect failed (NT_STATUS_BAD_NETWORK_NAME)
E [28/May/2011:14:32:31 -0700] [Job 15] Tree connect failed (NT_STATUS_BAD_NETWORK_NAME)
[code]....
I am having FC11 with an HP prineter attached my firewall is disabled I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5 I am not sure what is missing when I tried to print from the XP box I got "Test pge failed to print" error what I have really noticed in the xp and vista box is that when I go to the printer settings inside control panel , pressing the ports tab and checking to what port I am printing I see that the port "\samba-serverprinter" is not created there this is the log
[code]...
I'm giving up in ever hoping that I'll get printing working with windows 7 with the strange comments I've found on the net. Basically I have a samsung ML2240 printer shared on the network, everything can print to it fine except for my windows 7 laptop. It's shared via Samba.
Quote:
Once you have extracted the driver files, copy the 32-bit drivers to the /usr/share/cups/drivers directory and the 64-bit drivers to the /usr/share/cups/drivers/x64 directory exactly as named below:
[Windows 2000 and higher]
ps5ui.dll
pscript.hlp
pscript.ntf
pscript5.dll
However after checking this, I dont have the files named within int he correct folder on my windows system :
%WINDIR%SYSTEM32SPOOLDRIVERSX643 folder for 64-bit drivers.I've tried installing the printer via the windows installer, however this adds the driver then tells me its not working and fails to print. I really dont know where to turn with this one. I've tried installing the samsung supplied drivers from the website. However they still fail to connect.
I would like to know if it is possible to configure my laptop so that it can print wirelessly on my MP800r canon printer, and if so then how to configure them to make this operation possible. I'm using Ubuntu.
View 1 Replies View RelatedI'm a Fedora user, and recently I switched from KDE to Gnome. Since then I'm experiencing a nerve-wracking problem when I use the right-click. Almost every time when I right-click the result is the automatic selection of the option in the context menu which is at the same level as the cursor. This happens more than 50% of the cases. Is that normal in Gnome or am I the only one that experiences this kind of problem?
View 6 Replies View Relatedmy net worked HP printer will not print-broken pipe - this started after I had to switch off the printer at the mains in order to attend to a paper jam. Now it will not print apart from a test page. I am using Fedora 10 and the device info is "hp:/net/Officejet_Pro_L7500?ip=192.168.0.4"
View 5 Replies View RelatedI'm using Ubuntu 10.04 on a laptop in a wireless system at home. It's all working fine. I can browse the internet without any difficulties. The problem is that I cannot print to my HP Laserjet 1022nw. The IP for the printer is 192.168.2.2 and I can reach it (and print) from my windows machine. But, if I use the laptop it cannot reach the server at 192.168.2.2 and all print jobs freeze. It's odd because I used the Ubuntu network printer install AppSocket/HP JetDirect connection and it found the printer at socket://192.168.2.2:9100 and installed the correct Foomatic driver. But now the browser cannot get to 192.168.2.2 and it wont print. What am I missing?
View 5 Replies View RelatedI have a Brother MFC-295CN network printer. Been having a heck of a time trying to get this thing working since I installed Ubuntu 11.04 yesterday. I've been away from Linux for some time and am new at using it. Downloaded and installed using the Software Center:
mfc295cnlpr-1.1.2.i386-1.deb
mfc295cncupswrapper-1.1.2-2.i386.deb
brscan3-0.2.11-4.i386.deb
brscan-skey-0.2.1-3.i386.deb
Was able to send a test print and it came out fine. But when I tried to send a print job - nothing. And, the scanner won't work either.
My computer is a Gateway GT5464. It's dual booted with Windows 7.
I would like to run a script after I got a network connection. The reason is that I'm trying to install Dropbox on my Fedora 12 laptop, but it only works if I start it after I'm connected to the network. So, is it possible to automatically run a script after you've got the connection?
View 3 Replies View RelatedI had previously been having loads of problems getting my wireless printer to work with Linux [http://ubuntuforums.org/showthread.php?t=1453697]. Everything is working fine now. However, something that confused me is that whenever I tried to ping the printer _before_ I got it working, it would fail with a _different_ IP address. That is, the command 'ping x.y.z.3' would fail with a message saying it was unable to contact 'x.y.z.2'
Now I am looking at my router - for something unrelated - and I've noticed that rogue IP address shows up in the list of connected devices. It has a MAC address but for the device name it lists "<unknown>". Should I be concerned about this? how to figure out what this device is?
After upgrade to ghostscript 9.02 from current all print jobs fail with: 'There is a missing print filter for printer HP_F2480'
The printer is an All-inone deskjet F2480 and the cups printer queue has been
setup with the hplip tools. Before the upgrade it was 'working' with quite a few bugs...eg image not printed correct, multipage printing garbage. (page for page printing was the workaround)
Do I need to remove the printer and define it again?
I noticed that a bit after I had updated Ubuntu 10.04 through the Update Manager, I couldn't print at all! (I run ubuntu 10.04 on my laptop and have a networked HP Officejet 6110xi all-in-one printer connected to a comp running Windows XP home on the same LAN). Everything works when I boot up in windows vista, so the problem is definitely in Ubuntu.
First, I checked the printer jobs and it said that there was an error with a filter or something. Restarting the job didn't do squat, so I decided to try reinstalling my printer, but get the same CUPS error "error-client-not-possible" right after I click "Apply". I then Googled the issue but didn't find much of anything, so I thought I'd try reinstalling CUPS. No luck there either... Same error again and again.
I'm trying to get my Ubuntu computer to connect my Windows 7 shares. I do have Samba installed and it can "see" my Windows 7 computer...however, I cannot connect to the machine. I think I've heard some issues with the way how Windows 7 deals with networking now and Samba doesn't work with Windows 7 now or something? If possible, I can always use an NFS server and client for my Windows 7 computer.
View 5 Replies View RelatedI have Fedora 14 server with installed cups, samba and shared printer. I am trying to print from Windows Vista computer. Printer is available via network, test page is printing as well as any text document. The problem is in printing of dvi and pdf files only. In this case, Windows sends printing task but the printer does not response. How can I fix this?
View 2 Replies View RelatedWould it be possible to insert another wired network card into the router-connected computer, share the internet connection and be able to transfer files between the two?
View 1 Replies View RelatedI have recently installed Fedora 12 on my pc but I am not able to browse the internet although the network icon shows the computer is connected.
I tried the dig command and got the following message:global options +cmd; connection timed out; servers could not be reached;
Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
View 9 Replies View Related
