Ubuntu Networking :: Dell Inspiron 6400: No Wifi After Upgrade?
May 9, 2011
I'm on a Dell Inspiron 6400 which had been running Ubuntu 10.10 (32 bit) perfectly.Today I upgraded it to Natty and the wifi now refuses to work. Details: While no Additional Drivers were needed on 10.10, upon installing Natty it prompted me to install "Broadcom STA proprietary wireless driver". Now when it's active I don't even have the option 'Enable Wireless' (only Enable Networking). If I disable STA the Enable Wireless option comes back, yet I can't actually search for wifi networks or connect to my saved one. The keyboard key to enable/disable wireless also does nothing.
I can take this laptop to somewhere with an ethernet connection for an afternoon if need be, but am currently stumped as to what to do. Obviously I know this machine can handle Wifi under Ubuntu - it's definitely a Natty problem.
I've got a wireless problem on my laptop (dell inspiron 6400).I don't know when exactly and why, but every time I watch a video on ..... or allostreaming, after a while (a few minutes), my wireless disconnect and it's impossible to get back any connexion. The only solution I have is to reboot my computer.
the command : iwconfig shows : Code: lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11abg ESSID:"Callalc" code.... Dec 18 18:33:18 yannick-laptop wpa_supplicant[1390]: Failed to initiate AP scan.
i can use internet in my Laptop. My laptop is only connected with wireless. No cable connection avilable here. Wireless is functioning well in windows 7 but in openSuSe 11.2 it is not functioning. I've searched on this issue in net and found that i've to install Packman repository or install driver from broadcom website. Please help me by giving easy way to do so. Following is the detail of my wireless device and some other information.
Code: linux-gkpt:~ # lspci -v 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Subsystem: Dell Wireless 1390 WLAN Mini-Card Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at efdfc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 2 Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit-
My brother has just installed 9.10 on his Inspiron 6400 and would like to have a dual screen setup using both the laptop display and a flatscreen attached to the VGA socket. Using the standard display options, the two displays are recognised and when the 'mirror screens' option is disabled then settings applied it works to the extent of allowing the cursor to move between the two monitors; however the monitors display nothing except a black screen and the cursor.
I've updated everything to the current version, had a look for restricted drivers (none are suggested by the GUI tool thing) and checked both displays work (both independently and as mirrored). I also had a look for an xorg.conf to poke around in but there wasn't one there.
I am trying to use JACK for some audio applications, but I have had no success until now I'am using Ubuntu 10.04 on my Dell Inspiron 6400. Kernel 2.6.32-33.
The following is the QjackCtl log: p, li { white-space: pre-wrap; } 14:38:48.196 Steckfeld deaktiviert. 14:38:48.377 Statistik zurckgesetzt.
i've installed openSUSE 11.2/KDE. Installation process finishes with fun. The first thing that i wanted in my laptop don't work. That's wireless internet. I've google and google. saw many thereds in openSUSE forms and check what i understand after reading thereds. Finally what i understand is i've to install firmware. I've downloaded the b43-fwcutter and broadcom-wl-4.178.10.4.tar. Installed b43-fwcutter. and copy broadcom-wl-4.178.10.4.tar. in to root. by using
ok basically i have a new dell inspiron n5010 with a broadcom 4313 wifi card. it doesnt work with ubuntu studio 10.10. I have the drivers all installed and it works on ethernet with the broadcom STA proprietry driver. if i disable this driver the eth doesnt work. but the driver shows its working (screenshot-1).
There is no pop up or anything in the task bar for detected wifi. i open the network settings and it shows up with a wifi option but i have to go into properties and manually type in what i have "the_den_meribel". which didn't work. (screenshot-2).
i have tried the other driver broadcom-sta-common and that doesnt make it work either. screenshot-3. i did try to install the "lp-pphhy" or whatever it is (seacrh for firmware-b43 in synaptic).
i have a list of results from what i have typed into the terminal: dell inspiron n5010
I just installed the 64-bit Kubuntu 11.04 and i've been having some issues getting the wifi to work. At first I went to additional drivers and activated the STA driver and restarted. After restarting when I went into the network manager and any option for wireless was disabled.
I just installed open suse 11.2 on a dell inspiron 6000 and i can not get the wifi card to work. Yast sees it, but that's about it. Ethernet works fine- hence the post.... any ideas? Model: intel pro wireless 2915abg calexico2.
I have a dell inspiron 530 desktop with core 2 quad and 4GB memory, running 32bit vista and 64 bit fedora 10. I searched on the web with "can I install 8GB memory on dell inspiron 530", and got couple of articles that says I only needed a bios upgrade.I downloaded bios version 1.0.18 from dell and run that in Windows to replace bios 1.0.12.After it said upgrade successful and asked me whether I wanted to reboot to have the new bios taking effect, and I said yes. And it shutdown the computer, and never came up Now, when power up, I see nothing, not even the "F2 to setup, F12 to boot menu" message, much less the grub selection. Is there a way to revive the computer?
I installed Ubuntu 10.10 on a Dell Inspiron 6000 but when I connect the ethernet cable the computer detects that the cable was connected but doesnt connect to the internet.
I have an Inspiron 1300 and have followed the "B43" instructions here:URl...Plus various other guides including the "one click b43 fix" but nothing useful happens. Wired access doesn't work either.
i have a dell inspiron 15r that i plan on running fedora on, however, today i booted fedora from a live cd and it was completely oblivious to the fact that i have a wireless card, obviously i need certain drivers for it, problem is i dont know what drivers those would be, or where to get them, http://www.dell.com/us/business/p/inspiron-15r/pd this is my laptop model, and it says i have a "Standard Dell Wireless 1501 802.11 g/n" wireless card, if anyone could tell me how to get this working,
The network icon and sound icon disappeared from the panel all of sudden one day while i was using ubuntu 9.10 and the network got disconnected. It used to work fine before when i was using ubuntu 9.04 and even after i updated to 9.10, but then that happened. I added the notification area back to the panel but now ubuntu cannot even find any wireless networks. When i connect a LAN cable to my laptop the internet works fine, but the wireless networks area in the network icon is grayed out and it doesn't show any wireless networks. I'm using a Dell Inspiron 600m laptop and my network card is Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05).
I'm running Ubuntu 9.10, Dell Inspiron 1545. I have the NDISwrapper installed, and the driver shows up in "Hardware Drivers" as activated (Broadcom STA wireless driver) it also shows up in "Windows Wireless Drivers" (bcmwl6) but it still won't allow me to connect wirelessly.
I am having trouble in getting the wireless up in Ubunto 10.04. Under Wireless Networks it says "wireless disabled". I have a dual boot with Windows 7, installed Ubunto with the help of Wubi installer. My laptop is Dell Inspiron 1545, with a 64 bit architecture.I have already done checking and enabling the wireless driver by going to System- Administration-Hardware Drivers and choosing Broadcom STA driver.
I've got a Dell Inspiron 1545 with wireless card Dell wireless 1397 802.11g. It was working fine with Windows and Ubuntu 9.04 (I've got the two OS installed alongside). But as soon as I upgraded my Ubuntu to version 10.4 I realised it lost its wireless connection! I updated the system, the hardware driver for Broadcom STA wireless driver is activated and in use (according to Ubuntu Hardware drivers checker) but the fact is that I can only connect on the Internet if I hook the net cable on it, when I run the mouse over internet connection icon at the topright side of the monitor I see "no network" message and when I left click on it the option "wireless network" it's disabled and gray. How can I get my wireless card back working?
i have to say that i'm not too familiar with Ubuntu... or Linux in general . I've installed it once, just to test it out but I didn't know how to use it so i just reinstalled windows. The other night, i was bored and decided i wanted to re-try Ubuntu and to my suprise, i found Wubi. I love ubuntu now and i made the decision to permanently switch over to ubuntu.
At first, my wireless wasn't working, but there was a quick fix. All i had to do was go to the Synaptic Package Manager, Reload, and search for "Broadcom." I installed the Broadcom STA Wireless driver and i was online within a couple of minutes. I then played around for a couple of hours before turning my laptop off. But, this morning, when i turned it back on...I coudlnt' connect. When i click the little connection icon in the top right, i see the message "Wireless is disabled".
There is a key on my computer that turns the wireless card on or off, and i have tried it. It doesn't work. I have reinstalled the broadcom driver and it doesn't work. I've rebooted...And it doesn't work. I don't know enough about linux to get a solution and every other solution i find on the internet doesn't work.
I have seen in other threads that you guys usually ask for a a couple of things from the user. ifconfig and the sudo lshw -C network so i have included them below. I also looked into the ubuntu help documentation and it told me to do the lspci command.
ifconfig
Code: eth0 Link encap:Ethernet HWaddr a4:ba:db:d1:61:c2 inet addr:192.168.1.68 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a6ba:dbff:fed1:61c2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
i have a dell inspiron 1764 windows 7. it will connect wirelessly fine on windows 7 side but when i boot to ubuntu cant detect network or anything. what do i need to do.
I finally got around to trying Ubuntu 10.04 on a "decommissioned" Dell Inspiron 8100 1.2Ghz P3 512MB RAM 40GB HD... and Ubuntu is absolutely AMAZING compared to Windows! I'm a Mac guy and honestly Ubuntu gives 90% of the Mac OS GUI and 0% of the "brain damage" of WinBLOWS...
The only thing missing in this laptop is WiFi which I want to do via one of the PCMCIA slots since the mini-PCI is a combo 10/100 network + v.90 modem card... and I need to keep the Ethernet port and fax modem capabilities.
What are the best "Plug n Play" PCMCIA WiFi cards for our "G" and "N" WPA2 ONLY Airport Express WiFi network? I'm new to Linux so I'd really like to avoid editing and replacing system files and drivers if possible to get a PCMCIA card working. I'd also like a card that works in WinXP Pro SP3 since this laptop is dual boot capable.
I'm running on 11.04 on my Dell Inspiron 1764, and so far haven't been able to achieve internet access through either a direct wired connection or wireless.
My wife's laptop is Dell Inspiron 6400 running 11.04. Wireless has recently stopped working. Running rfkill list all shows dell-wifi hard blocked no soft blocked no. The fn plus F2 keys toggle status between blocked no and blocked yes, but network manager still can't see network. I've tried removing the Broadcom STA driver - no joy.
I'm having problems connecting to a wireless network on my Dell inspiron 1520. i can't seem to enable wireless roaming on ubuntu and i get various error messages when i try.
When i run iwconfig, i get:
running iwlistscan gives me:
When i right click the network manager, there is no "enable wireless" option. I know that wireless works since i used it last night on windows, and the radio is turned on.
I tried to find my solution for hours now but no luck. I'm a medical student and the other day I finally found the time to set up ubuntu for my first time. Everything was working great and I had wireless up and running. However, I tried to set up tethering to my iphone and after that my wireless hasn't been working (I've noticed no other problems). [URL]..Then I used this tutorial [URL].. However, after doing these steps the computer needed to reboot (I actually forget exactly where but I had to reboot in the middle of the second tutorial). After my computer restarted my wireless no longer showed up. By this I mean that wireless network no longer even showed up as an option when I left clicked then connections. However, I did not lose the wireless profile under network connections. So I went to system and noticed that the Broadcom STA driver was no longer active. So I tried to activate again and received this message.
