What Linux version should i get if i want to revive an old laptop? Im talking about a Dell Inspiron 1501, with a Mobile AMD Sempron Processor 3500+789 MHz, 448 MB RAM, running on Windows XP 2002 professional edition.
View 9 RepliesWireless problem with Dell laptop running Ubuntu 10.10
View 5 Replies View RelatedI have installed F11 on my Dell Inspiron 1501. I tried to get the Broadcom 4311 wireless card to work by following the instructions for installing the Broadcom driver from this link: [url].
That resulted in the following errors when I gave the command:
Code:
I removed the broadcom-wl package and installed the autoen package from DangerMouse. After rebooting wireless works but I still get the same errors when I give the command:
Code:
I had to disable encryption on the router to connect, but I guess that's a compromise I'll have to make right now. I will work on that some more after I get these error messages straightened out:
Code:
Note that wireless does seem to be working (though without encryption) despite the error messages. And I got these same error messages with the Broadcom driver but I could not get wireless working.
I have installed Fedora12 on Dell Inspiron laptop. Here are my key details of my laptop.
<Fn + F4 > ---- For decreasing Brightness
<Fn + F5 > ---- For increasing Brightness
<Fn + F2 > ---- To enable Bluetooth
I am able to enable bluetooth by pressing <Fn + F2>, But I am not able to increase OR decrease brightness of my laptop screen.I have attached keymap of my laptop by the output of
Code:
xmodmap -pke
Please find the attachment keymap.txt.
I have bluetooth enabled in a Windows desktop Machine, which is connected to internet.
I would like to connect to internet through bluetooth available in my laptop which is running on CentOS 5.3.
I referred to many tutorials in internet, still couldn't configure bluetooth.
I have a old Dell Inspiron Laptop I would like to use, but it dosent have awhole lot of memory 160megs worth and tried running the live cd of Ubuntu and Lubuntu and all i get on the screen is a blinking cursor. It give me the option to boot off the cd but that is where it stops.
View 3 Replies View RelatedI am trying to install Ubuntu 10.04 on a dell Inspiron laptop. When I choose the install option in the boot menu it loads my to a log in screen. but Ubuntu has never been installed in my laptop.
View 5 Replies View RelatedI am using Ubuntu right now. But I wanted to install Fedora 12 on my Dell inspiron 1545 laptop. My questions are can I use a live cd if available for fedora 12 and then install it on my laptop like we can do for ubuntu. Are all the drivers available automatically installed during installation.
The problem I faced my last installation with fedora 11 was that I could not get the wireless installed and I was unsuccessful in installing the wireless drivers using ndis wrapper or b43-legacy or something.
Can you give me a detailed link which could allow me to install the wireless drivers and also the video drivers for my laptop. The problem I am facing with my ubuntu 10.04 is that it is slow, the flash plugin is worst i guess, some of the flash videos are very slow.
Taking all of these into account can someone suggest me a good operating system. I am pretty much interested in learning linux rather than just using it like a windows operating system. I am considering, fedora 12, suse 11.2, linuxmint, centos, mandriva. Which one could be a best possible for my installation.
As I am not willing to purchase a dvd for these linux flavors can I use my flashdrive to install.
I installed REL 5.5 on this Dell laptop (originally win 7) and everything works ok except when i get to the login GUI the LCD brightness (or lack of) sets to it's lowest so i have to click the f5 button to brighten the screen. If I log out, the LCD resets to the dimmest setting (can hardly make out the login GUI) and again I have to click on f5. I believe I need to update the BIOS but I don't know how. The BIOS update I dound on-line if a xxx.exe file.
View 1 Replies View RelatedI am trying run the 5.3 LiveCD on a Dell Inspiron 5100 laptop. If I boot the typical LiveCD I get no display once everything is loaded. If I boot the text version and then perform a startx command I still get no display. I have been able to install other Linux distributions without this type of issue. Is there a way to configure something for the display to function properly?
View 2 Replies View RelatedWhat is the best distro of ubuntu to install on a Dell Inspiron 7000 notebook circa 2000-2001?
View 3 Replies View RelatedI've just installed brand new Debian 6 on an oldish Dell Inspiron 5160 laptop. This features an XGI Volari XP5 video card, which I can see reported in /var/log/Xorg.0.log.
When Debian boots it will only run in command line mode. Running startx hangs up the whole system and just displays a black screen with a few vertical stripes in different colours of dark green.
the default vesa driver for X.org doesn't play very well with the XGI video card.
I've tried running
X -configure
then
X -config /root/xorg.conf.new
This correctly detects the XGI Volari XP5 card (if you look through the xorg.conf) but running the second X command still hangs up the system.
X runs fine under Knoppix, but most recent Ubuntu distros I've tried actually hung up after the initial text-based startup section, so presumably died as soon as X started up. Debian's graphical installer worked fine, however.
My wife's laptop is Dell Inspiron 6400 running 11.04. Wireless has recently stopped working. Running
rfkill list all
shows dell-wifi hard blocked no soft blocked no.
The fn plus F2 keys toggle status between blocked no and blocked yes, but network manager still can't see network. I've tried removing the Broadcom STA driver - no joy.
The only problem I've had so far seems to be a common one but I haven't found a specific solution for a dell inspiron 700m. I have sound through the headphones but not through the laptop internal speakers. I've played with the alsamixer settings endlessly but no success, and I'm 99% sure that it's not an issue with the hardware or speaker wiring. I suspect I need to add an 'options snd-hda-intel model=xxxxx' line to alsa-base but not sure what argument to use.
[Code]...
i have installed red hat 5.1 on my dell inspiron 1525 laptop.It is not detecting any ethernet card.driver is marvel yukon 88E8040So far i found this package to be installed kmod-sk98lin-PAE-10.70.7.3-2.el5.elrepo.i686.rpm but it is showing me the dependencies problems..
View 4 Replies View RelatedI installed Ubuntu 8.04 on a Dell Inspiron 1420 laptop. All went good. But, the webcam was not recognized. I didnt see any packages to activate the Webcam. What should I do now.
View 1 Replies View RelatedI've been using slackware64 13.1 ever since it came out on my Dell Inspiron 1525, and I haven't really had any problems with my webcam in that time. However, last time I tried to use skype - I noticed that it couldn't detect it.
In kinfocenter, my webcam is picked up (OmniVision Technologies). The only time I've had a similar problem in the past is when I used the "Compact" option in lilo.conf, and the webcam wouldn't turn on. Just removing the option solved the problem.
Since I don't know what steps caused this to happen, I'm not sure where to start fixing it
I've just had to reinstall WinXP on a Dell Inspiron 1501. An ideal opportunity to try out Ubuntu. First I tried a WinXP/Hardy Heron dual boot - all seems okay. Next WinXP/Karmic dual boot - all seems okay. Then, why not, WinXP/Hardy/Karmic triple boot - all seems okay. Playing with each OS I noticed that Hardy had a couple of update notifications. So I opened Update Manager, went on-line, hit [Check] and was informed that there were 200+ Important Security Updates - I installed these. Better check Karmic too - similar story, installed 200+ updates. Everything still seems okay in WinXP, Hardy and Karmic. However, I've just noticed that the Grub2 boot menu now displays eight "Ubuntu" lines, as opposed to the four lines I had originally
Ubuntu, Linux 2.6.31-19-generic
Ubuntu, Linux 2.6.31-19-generic (recovery mode)
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)...
[Code]...
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
This card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
I'm on a Dell Inspiron 1525 running Arch Linux with an Intel 965 GM video chipset (from dmesg). I'm using the xf86-video-intel driver, and Xorg (using xfce4) works flawlessly, including compositing. Before getting into details about the HDMI, I'd like to ask why I don't gave an xorg.conf.d/10-moniter.conf, it's not there, just evdev, quirks, and synaptics (because I figured that moniter.conf could be modified to include HDMI). So, basically when I'm on my XFCE4 desktop, I plug in the HDMI cable and to the TV, and on windows, it would would work, but on Arch the TV just says: "No input", and my desktop just stays the same, so absolutely nothing happens. If I have it connected upon bootup, the HDMI displays (the BIOS and grub menu on the TV) until I select to boot Arch linux on Grub, then the tv screen goes blank. I've tried Googling this but I got no decent results, just a bunch of random posts of audio not working with Nvidia.
PS - I did dmesg and lspci (with grep HDMI) and no results, so maybe it doesn't even recognize it, but then what do I do? There's obviously Linux support for HDMI...
How can I install Linux Red Hat 9.2 on my new dell Inspiron 1545. When I want to installed it, it will get to a stage and will ask me of drivers. But on my desktop I don't have such problem.
View 12 Replies View RelatedI have a Slitaz 3.0 install on a UBB stick (via tazusb). It uses the cooking version. After a boot, all seems to be working except for the keyboard. Not a good start. Nothing wrong with the keyboard (typing this in Ubuntu and no probs in XP) so must be something wrong in Slitaz.
View 2 Replies View RelatedI recently upgraded from Ubuntu 10.4 to 11.4 on my Dell Inspiron laptop, and now my wireless is completely disabled, and I do not have an ethernet cord I can use. (I do not have internet access at home, I rely on public wifi.)
View 13 Replies View RelatedI want to convert an old Dell Inspiron Notebook (circa 2000) to a linux based machine. Any suggestions on which distro to use, or some sites that will tell me how to accomplish this task?
View 2 Replies View Relatedi can use internet in my Laptop. My laptop is only connected with wireless. No cable connection avilable here. Wireless is functioning well in windows 7 but in openSuSe 11.2 it is not functioning. I've searched on this issue in net and found that i've to install Packman repository or install driver from broadcom website. Please help me by giving easy way to do so. Following is the detail of my wireless device and some other information.
Code:
linux-gkpt:~ # lspci -v
0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
Subsystem: Dell Wireless 1390 WLAN Mini-Card
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at efdfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit-
[Code]...
I have an old dell inspiron 700 that I want to turn into a home file server. I have installed ubuntu 7.10 and after a huge amount of google work got all my hardware in line. Then I realised that I should have installed 10.10 So I downloaded and burnt the new ISO and tried to install it. The install does not recognize my Xircom RealPort Ethernet card but that is okay, 7.10 didn't either and I got it working post install. But 10.10 can't detect the pci hard drive. I have tried various things but since I am not that familiar with linux I am just stabbing in the dark.
What bios settings should I be aiming for? What boot options should I set and how? Why are the russians being such kill joys over the discovery of fossilized meteorites?
I just installed open suse 11.2 on a dell inspiron 6000 and i can not get the wifi card to work. Yast sees it, but that's about it. Ethernet works fine- hence the post.... any ideas? Model: intel pro wireless 2915abg calexico2.
View 1 Replies View RelatedI am able to boot Fedora 14 to the GUI, log in on the keyboard, see the desktop, and then I get no response from the laptop's keyboard or trackpad.
I do not know how to obtain hardware specifics on my keyboard or touchpad, so perhaps that would be good info for me to start with...
BTW my ultimate goal is to run an Amahi server on the laptop. 2600 has a pentium III 1.13GHz processor and 512Mb RAM
I have had to install the B43 diver before to get wireless to work.
View 5 Replies View Related