Fedora Networking :: How To Create Virtual Network Adapter
Nov 11, 2010I m facing problem in creating virtual network adpater. I want to have multiple mac address for a single NIC.
View 2 Replies
ADVERTISEMENT
Networking :: Create Multiple Virtual Adapter For VLAN'S
Jul 3, 2010I need to set a NAC (PacketFence) system , i would like to set in my case eth0 to work with several different VLAN'S i created ifcfg-eth0.2 copied from orginal ifcfg-eth0 and changed the ip and append VLAN=yes but when i am triyng to load ifcfg-eth0.2 i get error
I must missed something
My ifcfg-eth0 goes as follow
Code:
My ifcfg-eth0.2 goes as follow
Code:
CentOS 5 Networking :: Create Multiple Virtual Adapter For VLAN'S
Jul 3, 2010I need to set a NAC (PacketFence) system (CentOS 5.5), i would like to set in my case eth0 to work with several different VLAN'S i created ifcfg-eth0.2 copied from orginal ifcfg-eth0 and changed the ip and append VLAN=yes but when i am triyng to load ifcfg-eth0.2 i get error
my ifcfg-eth0 goes as follow
# Intel Corporation 82578DM Gigabit Network Connection
# Normal VLAN Lan adapter (Managment)(On-boad 1st NIC)
DEVICE=eth0
[code]....
Networking :: Virtual Network Adapter With Multiple Mac Address
Nov 10, 2010Is it possible to create virtual network adapter on the same physical network adapter? or How to give or have multiple MAC Address to the same adpater? I m working on centos 5.3.
View 6 Replies View RelatedUbuntu Networking :: Create A New Virtual Network Using A Subnet Of Public Range
Jan 27, 2010There seems to be a lot written about virtual networking but I am not sure what approach to take in my situation. My local subnet has a public block of 128 addresses. I have a virtual host running on my machine. My machine has a static address and I'd need to assign one to the guest. I have edited the guest's interface file and assigned a public address to it's eth0. However the guest cannot ping out and I can't ping in.
By default the virtual machine manager creates a virtual network (virbr0) and assigned a private address range to it. I have tried to create a new virtual network using a subnet of my public range (/31) but the manager says the range must to a minimum of 16 addresses (/4). It doesn't look possible to achieve my aims using the virtual machine manager.
In the past I have used the procedure laid out here:[URL].. which is to manually create a bridge. I am not sure that is relevant for my 9.10. I think I would have to disable the network manager if I were to do that and I am not sure how to do that.
OpenSUSE Network :: Create A Gateway Server That Allows Virtual Private Network Connections?
Feb 26, 2010I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedCentOS 5 :: Create A Fake Eth2 Network Adapter?
Jul 5, 2009I am running 2.2.4 and CentOS 5.3 (RHEL 5.3 clone). I have two Ethernet cards: eth0 and eth1. Eth1 is connected to the Internet; eth0 is connected to all my virtual machines; iptables connects eth1 to eth0.
A new machine I am adding needs to be off eth0 and eth1 (security reasons). Question: is there a way to make up a third fake Ethernet card that I do not physically have (eth2) and assign it to my new VM? How do I do this? Can I get away with some thing like this?
$ pwd
/etc/sysconfig/network-scripts
$ cat ifcfg-eth0
DEVICE=eth2
BOOTPROTO=none
BROADCAST=192.168.255.255
[Code]...
Fedora Networking :: Wireless-G USB Network Adapter Setup For 12
Jul 14, 2010To setup a Compact Wireless-G USB Network Adapter (WUSB54GC) on Fedora 12 ?
View 1 Replies View RelatedNetworking :: Creating A Virtual Ethernet Adapter?
Apr 14, 2010I am trying to setup a VPN using OpenVPN to allow a secure connection between my smartphone and my LAN. I have been reading an OpenVPN book and some tutorials on how to setup the server side, but I'm stuck at how to create a virtual device. The OpenVPN book says when installing OpenVPN the installer (or aptitude to be more precise) should ask me if it should create a TAP/TUN device. The thing is, it doesn't ask me anything at all. It just installs, that's it.
Most tutorials simply tell me to create a new device in the network/interfaces file. Where is the difference? What should I do now? I like having options, that is one reason I like Linux, but this does confuse me. My second question is about the IP range of the virtual adapter. Should it be in the same range as my LAN, or should I use something entirely different?
Fedora Networking :: Setup The Network Scripts To Create Two Network Interfaces For Vlan X And Y?
Apr 7, 2009Using Fedora 10, can anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
View 2 Replies View RelatedFedora Networking :: Get A Second Computer Up Using The WUSB54G Network Adapter Chipset 1915:2234?
Sep 26, 2009I have only been using Fedora for a month. I am trying to get a second computer up using the WUSB54G network adapter chipset 1915:2234. But the NetworkManager does not recognize it and it does not come up in the list of adapters when I try to add it.
View 8 Replies View RelatedHardware :: Lm-sensors Acpitz-virtual-0 Adapter - Virtual Device Temp1 ?
Aug 23, 2009I have spent considerable hours searching forums and googling. I have yet to find out what "lm-sensors acpitz-virtual-0 Adapter: Virtual device temp1:" is actually looking at. I have an Abit IP35 motherboard with Ubuntu 9.04 installed.
Here is the output from sensors:
Virtual Device Temp 1 keeps going up to 121 degrees and the computer shuts down. None of the others overheat. Also, my bios does not show my voltages to be set like it lists above. The bios in the motherboard is the latest from Abit.
Fedora Networking :: Isolated Network For Virtual Machines?
Oct 10, 2010give a reference to the definition of 'isolated network' as used in the Virtual Machine Manager? I have virtual machines that I do not want to have access to the host, I thought 'isolated network' did this but the VM's can ping the host. If (probably) I am wrong, how can I create an network that can not see anything else but what is also on the same network? The host and the isolated network are 192. and 172. The virtual bridge is not connected (or so it says) to any physical device.
View 2 Replies View RelatedFedora Networking :: Atheros AR2413 FC10 - D-Link Wireless Adapter Worked Fine With Network Manager Disabled
Mar 3, 2009I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
[Code]....
OpenSUSE Network :: Create The Virtual Web Site (name Based) Accessible On Http And Https Simultaneously?
Dec 2, 2010How to create the virtual web site (name based) accessible on http and https simultaneously ?
Example
server have ip address: 192.168.251.22 and virtual IP address=192.168.151.22
Target: create VirtualWebSite(name based) accessible on http and https simultaneously. ?
I can create a virtual site(name based), but he will be accessible ONLY on http or ONLY on https.
CentOS 5 Networking :: How To Create Virtual IP's
Mar 29, 2011I have one static IP, how can i turn it into multiple IPs so i can run multiple games on one machine.
View 2 Replies View RelatedFedora Networking :: Create A Broadband Connection Using Network Manager?
May 26, 2011Just replaced a working install of Ubuntu because i like GS over unity but i cant get my USB760 EVDO card to work. The usual fix of editing the cd.rules file and copying some information into modem.fdi does not seem to work on F15..
Also, noticed that when i attempt to create a broadband connection using network manager it allows me to go through all of the setup dialogs, but never actually adds the broadband connection.
Networking :: Network Adapter Down
Sep 14, 2009A node on a cluster that our lab has had sitting in a dusty room since time forgotten does not seem to want to talk to the rest of the world any more.Following is the information I found was being asked for on other posts for similar questions, transcribed by hand.
View 6 Replies View RelatedNetworking :: Lost In Network / Setting Up Network On Laptop With Virtual Guest Machines
Feb 16, 2010I've been trying to understand how Linux creates the network/interfaces on a machine (been reading the Linux admin guide), but as I'm pretty new to this subject, I've got lost in the forest.
To provide with my goal:
1.) Learn about network setups on Linux
2.) Be able to maintain my own (virtual) network
3.) Configure my (virtual) network
CentOS 5 Networking :: Configure Server1 To Have A Different Hostname On The Standard Network Than On The Virtual Network?
Oct 5, 2010I have a server that is on both a standard network and a virtual network, as follows: server1 attached to standard network server1 acting as Dom0 with two linux DomU guests (under Xen) I only have one network card. How do I configure server1 to have a different hostname on the standard network than on the virtual network? Here are the relevant network configuration files for server1:
/etc/sysconfig/network-scripts/ifcfg-eth0:1
DEVICE=eth0:1
BOOTPROTO=none
NETMASK=255.255.255.0
IPADDR=192.168.122.9
[Code]...
General :: Create And Configure A Virtual SAN Disk And Work On It With Virtual Machines?
Jun 29, 2010I would like to configure and SAN disk. But I do not have a physical SAN disk. Is it possible to create and configure a Virtual SAN disk and work on it with virtual machines?I have around 400GB of space in my Laptop.
View 7 Replies View RelatedServer :: Create A Virtual Host And Virtual Ip In Proftpd Centos?
Nov 22, 2010I want to create a virtual host and virtual ip in proftpd linux centos. can anyone please help me on this,I'm new in linux.
View 8 Replies View RelatedFedora Servers :: Can't Create Virtual Machine
Jan 6, 2009I used qemu sucesfully on F9 but I can't find it on F10. I can't create a virtual machine. I tried installing qemu from rpms that I found on their site without any luck. How can I create a virtual machine on F10?
View 2 Replies View RelatedFedora :: Can't Create Virtual Machine With QEMU/KVM
Nov 8, 2010I just install QEMU and virtual machine manager to use virtualization, but virt-manager cannot run properly. I can create a VM, then mount CDROM ISO, startup. With Windows installation, it runs well until format partition step, after that it is disconected and exit with error related to VNC. I dont know why have this problem cause the packages that I installed is from Fedora repo and I think they have been tested.
Here are some infos:
Fedora 14 - kernel 2.6.35.6-45.fc14.i686.PAE
qemu-2:0.13.0-0.7.rc1.fc14.i686
libvirt-0.8.3-2.fc14.i686
virt-manager-0.8.5-1.fc14.noarch
Ubuntu Networking :: Broadcom 802.11g Network Adapter?
Jan 3, 2010Basically a few weeks ago I decided to try Linux, in particular Ubuntu. I have it installed in my Windows 7 partition but now I am willing to take the full plunge and switch to it all the way. The only issue is I cannot connect to wireless internet. It states "device not ready". Wireless is turned on on my laptop, I am very near the source, have tried making a manual connection with the network setup. I tried the hardware tester and it found my ethernet and wireless hardware (Broadcom 802.11g Network Adapter).
I went to the package thing and looked for Broadcam. I found a package but it was already installed. I tried it manually with:
sudo apt-get install bcmwl-modaliases
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
I then heard to try "sudo apt-get install bcm43xx-fwcutter" and did but it couldnt find it.As stated before I am new to linux so I'm probably missing something easy I just beg your patiance as I learn this new operating system.
Ubuntu Networking :: Cannot Connect Via USB Network Adapter
Jan 7, 2010I have a Belkin N150 USB Wireless Network Adapter and a Belkin N150 Wireless Router. I cannot seem to get NetworkManager to connect to the internet. I have blacklisted the 9.10 staging driver and associated rt files. I have downloaded and built the ralink 2.3.0.0 driver. The light flashes on the usb but I cannot connect to internet.
lsusb output:
jerry@jerry-desktop:~$ lsusb
Bus 002 Device 003: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard
Bus 002 Device 002: ID 046d:c50e Logitech, Inc. MX-1000 Cordless Mouse Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:09c2 Logitech, Inc.
Bus 001 Device 005: ID 050d:935b Belkin Components
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsmod output:
jerry@jerry-desktop:~$ sudo lsmod
Module Size Used by
rt2870sta 554908 1
iwconfig output:
jerry@jerry-desktop:~$ sudo iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
ra0 Ralink STA ESSID:"11n-AP" Nickname:"RT2870STA"
Mode: Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thrff Fragment thrff
Encryption keyff
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I am not sure what the ra0 is telling me but what about the Access Point: Not-Associated statement? Does that mean that the network adapter is not connecting to the router?
Ubuntu Networking :: Setting Up USB Network Adapter?
Apr 20, 2010I'm trying Ubuntu for the first time; it's actually the first time I've messed with Linux at all-- and, well, it's kind of intimidating. One of my hobbies is playing with dead computers, and long story short, I have Ubuntu installed to a partition on an external drive connected to an older Dell desktop with no internal storage to call its own. The only network adapter I have to spare right now is the rather wimpy USB one that came with said desktop. I have the CD with the drivers to it, but I think the Linux drivers on it are for a different distribution. Am I going to need to scrounge up another network card or adapter, or am I going to have to start sheepishly asking ridiculous questions regarding basic operation of the command console?
View 4 Replies View RelatedNetworking :: Get USB Network Adapter To Work In Mint?
Dec 15, 2010I used Several Distos, went to school up to Linux 225, but haven't used Linux for years. I have an older (P4, Win xp) laptop I use at the coffee shop. I want to put Linux Mint on it. I use a USB Adapter (Arilink101 AWLL6075) for Wi-Fi. I tried the live CD and, of course, USB Adapter doesn't work. In the half hour I looked at it, I realized I forgot a lot of things. I could not even find the laptop USB. Will tring to get it to work be the typical Linux thing, where you download the drivers, do the install right, and it doesn't work? You compile drivers, set everything up right, and it doesn't work?
View 14 Replies View RelatedFedora :: Create Virtual Hosts For Each User On Server?
Nov 11, 2009I am trying to create virtual hosts for each user on my server using Name-based virtual hosts and then make a symbolic link to /home/userdir/html
Here is what I have for my virtual hosts:
NameVirtualHost *:80
<VirtualHost *:80>
ServerAdmin tasha@ttu.edu
DocumentRoot /home/httpd
ServerName 128.118.118.7
ErrorLog logs/error_log
CustomLog logs/common
</VirtualHost>
What do I need to add to make it follow symbolic links in /home/userdir/html?
Ubuntu Networking :: Make Changes To Network Adapter Persistent?
May 12, 2010I have a crappy cat5 cable that only works at 10BaseT settings on any nic. I have a gigabit nic which I configure using;Quote:ethtool -s eth2 speed 10 autoneg offProblem is that this setting doesn't stick after a reboot. How do I make the change permanent?
View 4 Replies View Related