Networking :: PPP Updates In Fedora 12 Break NetworkManager
Mar 15, 2010downgrading PPP, NetworkManger, and NetworkManager-gnome. This worked but is there an easy way to know when it is safe to apply the updates that are available?
View 2 Replies
ADVERTISEMENT
Ubuntu Installation :: Latest Updates Break The Xserver?
Jun 13, 2010Ubuntu has been great and it is a great Linux distro. Unfortunately, the update of 9.10 desktop edition to release 10.4 failed on a couple of fronts.
1) Xserver is no longer working;
2) An upgrade of grub-pc causes an exception.
The system ran perfectly before the update was performed. The update resulted in Attempting to install GRUB to a partition instead of MBR. This is a BAD idea. usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and is use is discouraged.
Based on information found at [URL]... an attempt was made to execute the following command. sudo aptitude dist-upgrade But that resulted in E: dpkg was interrupted, you must manually run sudo dpkg configure ato correct the problem The later launches an upgrade of grub-pc. This routine requests the selection of which devices are to be used to store grub-install. When that was done ... GRUB failed to install to the followed devices: /dev/sdb1 /dev/sdc1 /dev/sdd4
Do you want to continue anyway? If you do, your computer may not start up properly. GRUB installation failed. Continue? Questions:
1) Can / should the upgrade of grub-pc be bypassed in order to get the system running?
2) If not, what values should be selected when selecting the devices to store grub-install?
3)Because the computer is a RAID configuration, would someone advise are there special considerations which should be considered?
4) Once grub-pc is resolved or bypassed, should the commands found in the aforementioned article be used to repair xserver.
5) Are there additional measures which will be needed to in order to complete the update to release 10.4?
Here are some helpful details on the system configuration
The computer has four disk drives using RAID 1 and RAID 5.In the following configuration RAID5 Device #0 750.2 GB Sotfware RAID device
#1 750.2 GB ext4
SCSI1 (0,0,0) (sda) 320.1 GB ATA WDC WD3200AAKS-2
#4 primary 250.1 GB K raid
#3 primary 16.0 GB F swap
[Code]...
Fedora Networking :: NetworkManager Does Not Come Up In GNOME
Nov 25, 2009I have no problems seeing the networks available and connecting to a network in KDE. But there is no network manager in GNOME. I might have messed up with the settings earlier. What I can do though is run knetwork manager every time I start up (or add it to start up programs). But that opens up the KDE wallet which would rather avoid.I am thinking I need to install something related to NetowrkManager.
View 2 Replies View RelatedFedora Networking :: Does NetworkManager Use The Wpa_Supplicant
Feb 20, 2011if the NetworkManager uses wpa_supplicant? I normally dont use NetworkManager and decided to try it. I started it and tried it out and it works with WEP and WPA! I cant figure out why using the iwconfig command is not working by itself for WEP. WPA working with NetworkManager is just a bonus though.
View 4 Replies View RelatedFedora Networking :: F15 Is Disabling NetworkManager
Jun 25, 2011I'm an inordinate amount of trouble getting F15 to run without NetworkManager. If I boot with the NetworkManager service enabled, my NIC presents as expected at /dev/eth0 (I'm using biosdevname=0). However, when I stop the NetworkManager service, /dev/eth0 disappears from the filesystem.If I boot without NetworkManager enabled, /dev/eth0 is never created. Reviewing dmesg, udev is loading an ethernet driver.
View 1 Replies View RelatedFedora Networking :: NetworkManager Won't Connect Securely Under F10?
Feb 3, 2009I loaded F10 up on my laptop a few nights back. NetworkManager connects via Ethernet just fine. It will also connect wirelessly, but only when security is disabled. I've been using 128-bit WEP.
When I try to connect using security, this is what appears in the log:
Code:
Jan 29 21:07:17 localhost NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 29 21:07:17 localhost NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
[Code]......
Fedora Networking :: Where To Get Networkmanager Gnome Applet
Feb 5, 2009after fiddling around with compiz-fusion and KDE, my network suddenly disappeared. I looked in the package manager and apparently I don't have the gnome applet for networkmanager...but everything else I seem to have (the git version not svc or w/e) Anyone know if installing the applet will let me choose my wireless network and connect to it? Right now I think so, but what I have to do is boot into windows, find the package on the web and download it, then boot into fedora and install it
where I can find the fedora 10 networkmanager-gnome package (git version for x86_64)? I looked around and found the svc version and a git version for i386, but my OS is x86_64 and I couldn't find any git versions of it for 64-bit fedora's. btw, I have no idea what git and svc mean, but when I tried to install the svc version, it told me I had to install svc versions for all the other networkmanager packages...
Fedora Networking :: Intel 3945ABG Or NetworkManager?
Mar 19, 2009I recently installed F10 x86_64 on my Lenovo T61 laptop, and while I'm quite pleased with F10, I am having a difficult time with my wireless card. I spent most of yesterday searching for a solution, but none have presented themselves. Scenario: I am trying to connect to a HIDDEN SSID with NO ENCRYPTION (work Wifi, don't ask) using network-manager and its associated applet.
Symptoms: I left-click on NetworkManager, select "Connect to Hidden Wireless Network", enter my information, NetworkManager does a few things, and finally I'm told that NetworkManager cannot connect to my network.
[Code]...
Fedora Networking :: NetworkManager Static Ip And Routing ?
Apr 14, 2009I have just installed Fedora 10 on an old laptop and was quite impressed with how smoothly it all went ... until it came to setting up networking!
I have battled for three days now and I'm almost there;
- installed updated firmware to the built in Broadcom 4306 wireless network adapter
- got NetworkManager to work with a static ip address by manually editing the ifcfg-wlan0 file
- managed to get the WPA security to work
The only problem I am left with is that there is no default route; if I set one up using: ip r a default via 10.1.1.1 dev wlan0
Then everything starts working.
If I try to add routes using the NetworkManager gui interface they dont get saved (no suprises there then! ).
I have tried creating a route-wlan0 file in /etc/sysconfig/network-scripts/ but this seems to be ignored by NetworkManager.
Since the NetworkManager GUI is almost useless, does anyone know if there are any other configuration files I can manually modify to get a default route set?
Fedora Networking :: NetworkManager Doesn't Save WPA Key Under 11?
Aug 14, 2009Just upgraded from Fedora 10 to 11 and cannot setup wireless connection via NetworkManager. By some reason it doesn't store WPA key. There are following errors in the message log:
Code:
Aug 14 14:37:05 mike-dev NetworkManager: <WARN> connection_get_settings_cb(): connection_get_settings_cb: Invalid connection: 'NMSettingConnection' / 'uuid' invalid: 1
Aug 14 14:37:11 mike-dev NetworkManager: <WARN> wait_for_connection_expired(): Connection (2) /org/freedesktop/NetworkManagerSettings/2 failed to activate (timeout): (0) Connection was not provided by any settings service
Fedora Networking :: NetworkManager Blocked By SELinux?
Feb 15, 2011Fedora 13 64. NetworkManager tries to unlink /etc/hosts and is blocked:
Code:
SELinux is preventing /usr/sbin/NetworkManager from unlink access on the file /etc/hosts.
Additional Information:
[code]....
Fedora Networking :: NetworkManager Does Not Start After Updating F15?
May 28, 2011I upgraded from F14 to F15 using the DVD. The network worked fine after the upgrade.This morning I updated to the latest RPMs and rebooted, and now the network donot work!ifconfig shows only the lo interface. NetworkManager does not start, /var/log/messages shows signal 11.I tried to boot with the original kernel, but the results are the same.
View 6 Replies View RelatedFedora Networking :: Replacing NetworkManager With Wicd?
Jul 14, 2011i'm trying to replace default F15 NetworkManager with wicd. i installed wicd and used "chkconfig NetworkManager off" to disable NM but the problem i'm getting is
1. after each reboot i have to start wicd manually from su. any solution to get it loaded automatically?
2. also as i stopped nm, i have no network shortcut in taskbar, anyway wicd icon can be integrated in taskbar?
Fedora Networking :: Latest NetworkManager Fails To Start
Mar 25, 2009I just updated my Fedora 10 installation with the latest NetworkManager (NetworkManager-0.7.0.99-4.git20090324.fc10.i386) and now my NetworkManager fails to start. The output in the /var/log/messages is
[code]...
Fedora Networking :: NetworkManager Doesn't Autoconnect On Login
Jun 14, 2009Kinda fed up with NetworkManager. Since trying the betas of F11 on my laptop, i've had endless bad experience with it.
Installed version: 0.7.1
Aside from the description below, please let me know what detailed system info you want to see (specific commands appreciated).
When i log in, the applet loads. However, it doesn't connect to the last Wifi connection i used. My SSID is hidden, so i click on the applet and choose "Connect to hidden wireless network". i see my stored connection in the drop-list. i select it, and all fields are greyed out, the WPA key is blank, and the Connect button is disabled.
Leaving that dialog, i delete my stored connection and re-create it manually, setting all the information correctly. i have DSL, using my DSL modem in bridging mode, and for some reason NetworkManager doesn't retrieve the DNS entries from the modem, whereas Windows does. So i have to set the connection to "DHCP (Address Only)" and manually add the IPs for my DNS.
However, the connection doesn't initiate, so i click the applet again and attempt again to connect to my hidden SSID, using the newly created profile. Same problem: no WPA key, all boxed disabled, and Connect also disabled.
The ONLY way i can get this thing to connect is by deleting my stored connection, clicking to connect to a hidden SSID, and create the connection from the New dialog. However, then i still have to go into Edit Connections and set the DHCP and DNS correcly before i can reach outside.
This is ridiculous, and i haven't been messing with any other configuration. i had a thread when F11 was still in beta where i had inconsistent results with NetworkManager. After thinking i got it fixed with some help, and discovering it wasn't, i decided to wait for the final release to see if it would work any better.
(automatically connect to the last active connection), consistently (connects when it loads at login every time), Otherwise, if there's a different connection manager, i'm open to that as well. Especially if the alternate connection manager can automatically retrieve DNS settings the way Windows can.
Fedora Networking :: Manual Wireless Config - NetworkManager ?
Jul 3, 2009I have a typical 'linksys' style home wireless router (whose IP is 192.168.0.1) .
If I use DHCP, everything works fine:
Code:
However, if I try to give myself a static IP,
Code:
(I also never understood why the DNS server should not be the real dns server address (some external ip) rather than the router's address? but that is what gets set automatically when using DHCP)
So using manual, it connects, but then the internet doesn't work. The only difference I see when I go to "connection information" when connected with dhcp vs manual is in dhcp mode there is a "default route: 192.168.0.1". Is that the problem? How do I set this "default route" / what is it?
Fedora Networking :: Networkmanager VPN Client Setup For Sonicwall VPN
Aug 14, 2009I'm looking for some information on setting up a VPN client through Networkmanager in Gnome. My company uses a Sonicwall VPN server, and I'm having trouble getting my F11 laptop to connect. I've tried OpenS/WAN with no luck, and stumbled across Networkmanager's VPN setup. I can choose Cisco Compatible VPN (vpnc) which says it's compatible with Sonicwall IPSec-based VPNs. Is there a how-to I can check out, or has someone else got this setup to work?
View 2 Replies View RelatedFedora Networking :: Create A Vpn - Pptp - Using The Networkmanager - Failed ?
Sep 21, 2009I thought configuring a vpn would be a piece of cake, but it seems I'm missing something.
I'm attempting to create a vpn (pptp) using the networkmanager (0.7.1). I enter the gateway (I assume thats the server I'm trying to connect to) and my login information. What is the NT Domain?
When I try to connect it only tells me after a while that it failed to do so. How can I find the information on what went wrong in the process?
Fedora Networking :: NetworkManager Shows No Wireless Network?
Nov 27, 2009I'm having trouble getting this wireless card to work. I installed the broadcom-wl driver on Fedora 12.
Code:
[xxx@localhost ~]$ uname -r
2.6.31.6-145.fc12.x86_64
[xxx@localhost ~]$ lsmod | grep wl
wl 1278432 0
lib80211 6436 2 lib80211_crypt_tkip,wl
The card is recognized by System--admin--network as the correct card (BCM43XG) and assigned eth1. However, NetworkManager shows no wireless network. I have a great signal on the same machine if I boot into a Windows partition.
Fedora Networking :: NetworkManager Icon Missing For Real
May 10, 2010I'm so sorry to bother people, but I'm totally at a loss.I've searched the forum and have not found the answer.My NetworkManager icon is missing from the notification bar. Ive tried rt clicking on the top panel >add to pannel>notification area....yet it is still missing.I know that NetworkManager is installed, yet I cant even access it to connect to a wireless network. I'm able to connect to Eth0.I cant tell if my wireless card drivers are setup or not and if that makes a difference.
View 4 Replies View RelatedFedora Networking :: NetworkManager: Wireless Disabled By Default?
Jul 9, 2010I have just installed Fedora 13 on my Lenovo Ideapad S12 (company laptop, evaluating Fedora for companywide use on all laptops) and a facing a weird problem with KDE4 and NetworkManager / knetworkmanager. The laptops wifi card is a Broadcom BCM4312 and I have successfully extracted the necessary b43 firmware. The b43 module loads on boot and the wireless card is activated and ready to use. However, NetworkManager doesn't seem to agree and has wireless disabled by default every time I reboot or even logout / login. I have to check the box manually after which it automatically connects to my wifi network at home.
Any idea where I can check that box automatically on boot?
Fedora Networking :: NetworkManager Won't Configure Network Until Login
Jan 9, 2011I'm on F14 and can't seem to get NetworkManager to behave. I seem to remember being able to start my machine and see my static address configured right after boot. For some reason, that's no longer the case. When I finish a boot, I'm not getting any address until I log in. I've tried editing the ifcfg-eth0 both by hand and by the system-config-network. I've played with the "Available to all users" checkbox on both the nm config applet as well as the system-config-network gui. I can't seem to get it to behave predictably and give me my static without having to be in a gnome session.
Here's my ifcfg-eth0 from /etc/sysconfig/network-scripts
Fedora Networking :: Can't Enable System Connection In KDE NetworkManager?
May 25, 2011I'm using Fedora 15 with KDE, and in the NetworkManager settings I can't set my Ethernet connection to be a System Connection. The box is greyed out. I assume only root can enable this option, but GUI apps typically ask for an administrator password. I did add my user to the "Administrator" group when I installed and I can use sudo and all that.
View 2 Replies View RelatedFedora Networking :: NetworkManager-vpnc Doesn't Work
Jun 27, 2011how nobody else could have run into this in the meantime. [URL] Two friends of mine are having the same issue on Ubuntu-11.4-machines. In short: Connecting to the Cisco-VPN via shell-command "vpnc" works flawlessly, whereas NetworkManager just doesn't connect at all. We had this working in older versions of Fedora/Ubuntu about some months ago...
View 9 Replies View RelatedFedora Networking :: Mobile Broadband Fail After NetworkManager Update / What To Do?
Mar 11, 2009I have a Mobile Broadband connection (as NetworkManager calls it) that works very well until the latest update. Now it fails to connect 99.9% of the time. When it does connect it works very sluggishly.
I didn't update a second computer I have and it still works fine here. Both run F10 x86_64, both are fully updated (except for NM on this one).
Output of grep NetworkManager /var/log/messages | tail -100 from non working machine code...
Fedora Networking :: Name Resolution: Resolv.conf - NetworkManager - Nameserver
Mar 22, 2009I just installed F10 from a Live download iso on a Sony VAIO laptop with an Intel PRO/Wireless LAN2100 3B Mini PCI Adapter. The linux driver is ipw2100 and functions without problems.
After the install I accepted the update downloads offer and downloaded somewhere around 170 updates. The kernel version is 2.6.27.19-170.2.35.fc10.i686.
I am using a Linksys WRT55AG as a DHCP server. Using NetworkManger it assigns IP addresses without incident.
My problem is that I can't get name resolution to function without manual intervention.
I can ping other wireless nodes on my network and the response to $ dig -q www.yahoo.com is: ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 30153
The /etc/resolv.conf file contains no entry for 'nameserver=' and if I manually edit /etc/resolv.conf, it is overwritten on reboot or restarting the NetworkManager service. I am aware of /etc/sysconfig/networking/profiles/default/resolv.conf.
Additionally, in the var/log/messages file I can see that NetworkManager makes links between /etc/resolv.conf and the default version.
However, after either rebooting or restarting the NetworkManager service, if I manually enter a DNS address 192.168.1.1 (my wireless router) under the DNS tab of the system-config-network 1.5.95 application. This address does not persist after either rebooting or restarting NetworkManager.
If I disable NetworkManager, I can't get the WRT55AG to assign the wilreless adapter an IP address.
So the bottom line and my question is what do I need to do in order to simply boot and have wireless connectivity?
To what file does system-config-network 1.5.95 write the DNS address entered from it's GUI?
Fedora Networking :: NetworkManager Applet Requests Keyring Password?
Apr 11, 2009I have a FC10 installation with GNOME and NetworkManager and a wireless card. Everything works ok. However, when I try and setup gdm to do autologon I get the NetworkManager applet asking for the password for the gnome-keyring to get the wireless details. Since I want to use this machine as a sever this is unacceptable as I won't be around to type in the password. I tried the solution at [URL] but this does not work. I still get the password being requested and the keyring password is the same as the logon password. Can anyone say if there is a workaround that works to get the NetworkManager to be able to read the gnome keyring without having to prompt me for it.
View 5 Replies View RelatedFedora Networking :: Disable Networkmanager Notification Popup Balloons?
Jun 11, 2009does anyone know a way to disable those annoying NM 0.7.1 popup balloons in F11 (KDE)? The ones that say that it is now connected to the wired eth0 network for example? I would really like to get rid of those ugly GTK notifications in KDE, but the NM GUI doesn't seem to have an option for this?!
View 2 Replies View RelatedFedora Networking :: Configure NetworkManager To Drop Connections When VPN Fails ?
Aug 22, 2009I am using a VPN proxy service for privacy reasons. I have configured NetworkManager and it's PTPP VPN plug-in successfully.
I would like to configure NetworkManager to drop connections when the VPN fails so that I do not suffer 'privacy leaks' when it happens.
Fedora Networking :: Networkmanager Can See My Local Wireless Network - Asks For The Wep Key
Sep 26, 2009I've spent AGES getting ndiswrapper to work on FC11 with my USR 5416 card.
Now it's finally working and Networkmanager can see my local wireless network. Problem is when I try to connect and it asks for the wep key, the encryption I'm using is not an option.
My network uses a 64 bit ASCII passphrase. My options when connecting are:
None of these seem to be right for my network and, consequently, none of them work.