Fedora Networking :: Connect To F14 Using Another Computer?
Dec 14, 2010
I have F14 on a laptop and can't see the laptop screen very well, unless I put my face like right up against the glass, is there a way I can login to my F14 laptop using my windows desktop computer?
whats the easiest way to do that?
I used to use nomachine in previous versions, is that method still used in F14? can't seem to find the FreeNX package anymore.
I used these instructions in previous versions: [URL]
which you'd think would still work in F14, but not sure what happened to FreeNX
otherwise, how do you do it using vncserver? I didn't do it that way in the past because I didn't understand how.
using XFCE window manager in F14 on a windows 7 desktop
Laptop: HP Pavilion dv6-1350us
Desktop: custom build Asus computer using a 23 inch Samsung SyncMaster 226bw LCD display
View 2 Replies
ADVERTISEMENT
May 15, 2011
I have two computers and I'm trying to get them to talk to each other, but after I installed Fedora 14 on this computer, my other computer can't connect to this.
[code]...
Same with DAAP I'm using rhythmbox to both broadcast and listen to the DAAP, and the rhythmbox on the remote computer cant connect here either. ssh and VNC are working on the other computer as well, I can connect to other computers using ssh on both computers, and I can VNC over to the other computer without any problems, its the traffic going myway that seems to be hitting a roadblock. is it possible that since I installed a different system (was Ubuntu Natty before, and I was using all three services before I installed Fedora), I need to do something on my remote computer so that this won't crop up?
View 9 Replies
View Related
Jan 27, 2010
I am trying to connect a new Ericsson MD400 to my my computer but no way! I cannot make it work. I have tried all sort of advice e.i NetworkManager, ModemManager, HSOconnect, Ozercdoff etc. How do you really use NetworkManager?
View 1 Replies
View Related
Mar 6, 2011
I have so many _wired_ devices that I can't get by with just 4 eth cable outlets anymore, so I thought I'd hook up an older router that I don't use as a way to get extra places to plug devices into.
Now it looks like:
Internet
then cable modem
then router1/wifi + (1 eth NAT storage)
then router2 + 4 eth0 computers:
(legacy FC5 box)
(legacy F11 box)
(updated F13 box)
(windoze)
All of the computers EXCEPT the FC5 box are fine (my def of "fine" is I can ssh to and from the other computers and to outside computers, and browse the web).
The FC5 box, however, can ssh to and from computers inside the network just fine, but can't get any kind of web browsing. Nor can it ping to the outside. I get a "Network is unreachable" error. I'm not using a proxy, not knowingly, and my firewall settings haven't changed...it certainly hasn't been blocking port 80 before.
what's the best way to go about adding more ethernet when you need about 7 cables. I'm not really excited to buy a router with 8 ports or anything like that, especially when this seems to _almost_ be working just fine.
View 5 Replies
View Related
Jun 28, 2011
I am currently trying to upkeep and use my recently deceased fathers ubuntu machines, but as of 6 months ago I had never used Ubuntu or anything like it. I'm not trying to do all that much with it but a few days ago one of the machines lost its ability to connect to the internet, whereas every other machine in the house connects through the router just fine (wireless and ethernet.) I believe i've been able to diagnose part of the problem, the computer cannot connect to a DNS, but I have no idea as how to go about fixing it. My knowledge of Ubuntu is limited to just a few terminal commands. This computer is the one we use to network all of our printers and there are also some critical files on this machine that I need.
View 1 Replies
View Related
Feb 18, 2010
Here's a strange one. On my internal network, there are two WinBlows boxes, both connected to my Linux Router/Firewall. Yesterday, I needed to download a file from http://www.freebsd.org. The 1st machine I tried, would not connect from FireFox. When I tried, on the 2nd, it connected immediately. So, I did all the usual "stuff" on the 1st one. Re-booted, as it's WinBlows, cleared browser cache, etc. etc. It still wouldn't connect. BTW, connecting to other web sites was no issue. Just FreeBSD.
So, just for grins, I ran a traceroute from both machines, and here's where it gets freaky. Here's the traceroute from the working machine code...
View 7 Replies
View Related
Jul 12, 2010
i have a computer at another house that i would like to controll from my house (both run ubuntu lucid lynx) how do i connect to the other computer using the viewer and remote server pre-installed in ubuntu
View 2 Replies
View Related
Jan 15, 2011
I have my Linux box in my Lan environment. I want to connect my Linux computer remotely from my windows PC using command line . how can I connect it remotely over the Lan ?
View 1 Replies
View Related
Feb 6, 2010
I have Ubuntu 9.10 setup on a test box. I am able to connect to my Win XP box shares but I cannot connect to my Win 7 (64 bit) box I get the usual 'Unable to mount location'. I can get to the Win 7 share from my other Win box so it is a valid share. I also cannot connect via the Remote desktop viewer. I am afraid that if I cannot get this going my Ubuntu experiment i over before it started.
View 2 Replies
View Related
Jan 19, 2011
My desktop doesn't seem to be connecting to the network until I login. This creates a problem if I'm trying to ssh in after a reboot. It's a wired connection. Any ideas?
edit: sorry my internet lagged and the thread got copied
View 3 Replies
View Related
Apr 14, 2011
My hard drive crashed and I put in my old one. Re-installed Ubuntu and now my wireless don't connect. I have to choose my network, then enter my password to get it to work.
View 3 Replies
View Related
May 7, 2011
if I install dhcp ip on my computer, then my computer will not connect to the network, but if I set it up with static ip then my computer will connect to the network. but after 5 minutes later my computer will be mounted from the server dhcp ip. and my computer is not connected anymore to the network dropped out again.
View 1 Replies
View Related
Feb 15, 2011
I am attempting to connect to my Windows Computer via a wired network on a sky router. When I tried with PClinuxOS it configured automatically. With the latest version of open SuSe this is quite a bit different. I have got as far as the network being auto and active with an Icon showing on the taskbar. However when I click on the Windows network Icon SuSe tries to locate my Computer but then comes back with "failed to retrieve share list from server". This is as far as I can get after several hours of trying.
View 1 Replies
View Related
Jul 28, 2011
Hey I just installed linux on my computer and it will not connect to any wireless networks, it will detect them and say try to connect but for some reason wont. It does connect just fine to a wired network.
View 1 Replies
View Related
Jul 1, 2009
I have a server in my house with webmin and virtualmin installed et i made a mistake.Ive created a virual server and ive change the lan ip adresse. 192.168.2.30 ive change it for 192.168.2.31.Now of course nothing work. Im not able to connect via ssh via another computer.So, on the server i write ifconfig and it tell me the adresse is 127.0.0.1 and no more adresse like 192.168.x.x.
View 2 Replies
View Related
Mar 18, 2011
I have just installed Ubuntu 10.10 on my work computer. We have numerous machines on our Network, on Windows 7, I could never see the network machines listed but I could connect to individual machines simply by typing it's name in the address bar of the file explorer, such as://COMPUTER-NAMEWhen I connected my mac, I could access other computer's files using Apple + K smb://10.0.1.xxx
View 3 Replies
View Related
Apr 9, 2011
I couldn't find an answer to this question (not including vpn) on different threads so decided to eventually post it, though it's probably easy one. I would like to connect to some application on known IP and port in the internet from my LAN computer. However to do so (I have some application, not any administrative constraints or not being allowed to) I would like to use local addresses. So, let's say - I want to connect to the external host VV.XX.YY.ZZ, port AA using 192.168.EE.FF port BB. Baically so far I have limitation in my application (too many places for possible error, to correct it right now - will change it in future). Is it possible that after my application sends request to 192.168.1.EE port BB, my Linux transparently translates it to VV.XX.YY.ZZ:AA? I tried iptables tutorials and some forums, but nothing seems to be addressing this issue. I don't know if it's event possible with iptables but am pretty sure this should be possible.
View 5 Replies
View Related
Feb 15, 2011
cannot connect to my window computer using open SuSe
I am attempting to connect to my Windows Computer via a wired network on a sky router. When I tried with PClinuxOS it configured automatically. With the latest version of open SuSe 13.1this is quite a bit different. I have got as far as the network being auto and active with an Icon showing on the taskbar. However when I click on the Windows network Icon SuSe tyies to locate my Computer but then comes back with " failed to reteive share list from server. This is as far as I can get after several hours of trying.
View 1 Replies
View Related
Mar 25, 2010
I like to telnet from windows but unable to connect to the remote computer..
from windows i can ping the system its working
telnet service is on
from only i mentioned the windows IP...
View 3 Replies
View Related
Sep 3, 2009
I just moved into a new apartment and now connect via DHCP. Everything seems fine network-wise, except that when I'm at work I can't connect to the home box. (CentOS 5.3 x86_64) One thing I noticed is that I can't really determine my "true" IP address. What I mean is that it looks like my IP is 192.168.0.190, but when I use linuxdcpp, and enter a hub, I'm told my IP addr is actually something like 71.192.163.206. Here's some info:
[root@localhost cwatson]$ cat /var/lib/dhclient/dhclient-eth0.leases
option dhcp-server-identifier 192.168.0.1;
option domain-name-servers 192.168.0.1;
option broadcast-address 192.168.0.255;
[Code]...
View 4 Replies
View Related
May 20, 2009
I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies
View Related
Jan 22, 2010
I have a Verizon Droid Eris, an Android phone that has not yet been rooted. Due to the lack of root capabilities the only way to tether my phone is through PDANet for Android. Unfortunately there is no Linux version of PDANet, so the only computer I can tether my phone with is my laptop which is running Vista.
I also have a desktop running Koala, which is ultimately the computer I want to get connected. I'm hoping that there is some way I can use Internet Connection Sharing on the laptop to accomplish my goal, but I haven't had much luck so far. I don't have a crossover cable either so I would prefer to connect the laptop and the desktop via my Belkin F5D7230-4 wireless router.
View 3 Replies
View Related
Jul 27, 2010
I recently setup motion on one of my computers with a USB camera. On that computer if I type [URL] I can see my live video. If however I type [URL] on that computer or any other on my wireless network, I get a page cannot be displayed. I checked that UFW was disabled and I am able to ping the motion computer from any other computer on my network. Also I am not sure if it matters but I do have apache installed on my motion computer as well. why I cant view my live video from different computers I am using Ubuntu 10.4 on all computers
View 4 Replies
View Related
Mar 6, 2011
I have a built-in gigabit Ethernet card which is connected to a router. Router's IP address is 192.168.2.1 My IP is 192.168.2.161 (eth0) I also have a Nokia N900 connected via USB and its IP is 192.168.1.1. It serves as a second router and on that interface (usb0) my IP is 192.168.1.2 N900 is also connected to a wireless network. Router of that network has the IP 10.0.0.1 and N900's IP is 10.0.0.50 (wlan0) My problem is that I want to reach a server at 10.0.0.7 from my computer. Is there a way I can do that?
View 1 Replies
View Related
Mar 22, 2009
how to configure rdesktop to connect to a Windows (XP/2003) computer, but going through a Terminal Services Gateway or connecting to a Terminal Services Server through TLS/SSL? The command line options or any on-line documentation I was able to find, omits this entirely. Using the Windows Remote Desktop Client (RDP6) you can configure Terminal Services Gateway connections from the Advanced Tab. I suspect that rdesktop, gnome-rdp, tsclient et el can't do this yet as they support up to RDP5. Currently I am using a WinXP VM to accomplish this, but would like to do this natively on my Linux box.
View 3 Replies
View Related
Nov 1, 2010
I am going to a country with government managed firewalls. How can I connect to my home computer's (Ubuntu 10.04) internet connection from a computer behind these firewalls?
View 2 Replies
View Related
Jan 17, 2010
I'm trying to connect my fedora core pc to my windows 7 network.
View 4 Replies
View Related
Sep 5, 2010
I am using Ubuntu Studio 10.04 LTS and I am experiencing the following problem: my computer loses its Internet connection and appears to require several reboots to re-establish an Internet connection.
As suggested on a similar post relating to wireless connection loss, I supply the output of sudo lshw -C network
*-network
description: Ethernet interface
product: NetLink BCM5789 Gigabit Ethernet PCI Express
vendor: Broadcom Corporation
[Code].....
Note that I have REMOVED my wireless card in case there was some kind of hardware conflict or failure. I am using a wired connection through a Linksys WRT54G router that is supplying an Internet connection to another computer and an IP phone without any problem.
When I run the command network-admin (or select System > Administration > Network) I can see only 3 tabs (General, DNS and Hosts) It seems that the Connections tab has disappeared (and I believe this happened when I upgraded from Ubuntu 9/Karmic Koala). If I click Help it shows me that there should be 4 tabs, not 3.
The connection dropping began prior to my decision to upgrade. In fact it took several attempts to complete the upgrade. Should I attempt to re-install the upgrade? I am not sure how to do it without losing my connection. When I visit System > Administration > Update Manager, I am informed that my system is up to date.
View 3 Replies
View Related
Jun 22, 2010
I'm trying to connect to another computer in my network via qpid-config(which is running qpid server). Here is where I follow the instructions [URL].. I can connect to qpid server(which is running on the network) via JMX Management Console which is gui version of what I'm to accomplish from console/unix shell. I can connect and read messages from queue(s) from this server so it means there is no problem with network or whatever. I'm running Fedora Core 13, here is the following combinations I've tried so far with qpid-config so I can run qpid-tool and some other commands :
Code:
qpid-config -a localhost, 192.168.1.2:8999, guest/guest@qpid-server
qpid-config -a guest/guest@qpid-server 192.168.1.2:8999
qpid-config -a qpid-server, 192.168.1.2:8999, qpid-server:8999, guest/guest@qpid-server
qpid-server is added to /etc/hosts as hostname for 192.168.1.2
Had anyone anything similar to this maybe I'm missreading the instructions(although they are pretty straight forward), I've spend so much time on this and just stuck now.
View 1 Replies
View Related
Jul 23, 2010
Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies
View Related
