I have a server in my house with webmin and virtualmin installed et i made a mistake.Ive created a virual server and ive change the lan ip adresse. 192.168.2.30 ive change it for 192.168.2.31.Now of course nothing work. Im not able to connect via ssh via another computer.So, on the server i write ifconfig and it tell me the adresse is 127.0.0.1 and no more adresse like 192.168.x.x.
View 2 RepliesI just moved into a new apartment and now connect via DHCP. Everything seems fine network-wise, except that when I'm at work I can't connect to the home box. (CentOS 5.3 x86_64) One thing I noticed is that I can't really determine my "true" IP address. What I mean is that it looks like my IP is 192.168.0.190, but when I use linuxdcpp, and enter a hub, I'm told my IP addr is actually something like 71.192.163.206. Here's some info:
[root@localhost cwatson]$ cat /var/lib/dhclient/dhclient-eth0.leases
option dhcp-server-identifier 192.168.0.1;
option domain-name-servers 192.168.0.1;
option broadcast-address 192.168.0.255;
[Code]...
I like to telnet from windows but unable to connect to the remote computer..
from windows i can ping the system its working
telnet service is on
from only i mentioned the windows IP...
I recently setup motion on one of my computers with a USB camera. On that computer if I type [URL] I can see my live video. If however I type [URL] on that computer or any other on my wireless network, I get a page cannot be displayed. I checked that UFW was disabled and I am able to ping the motion computer from any other computer on my network. Also I am not sure if it matters but I do have apache installed on my motion computer as well. why I cant view my live video from different computers I am using Ubuntu 10.4 on all computers
View 4 Replies View Relatedtelnet localhost the output is...
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
I don't understand what is the problem. Its not configured properly how do i configure it?
I have 2 server behind the netgear router on my network . win2k3 and CentOS development server, I have port forarded 80 to win2k3 server which i can access over the internet and is accessable. However I can SSH CentOS machine and portforwarded 8080 and 82 for web access, I can't access via any of the port, browsers says UNABLE TO CONNECT.. there is no firewall in CentOS machine.
View 1 Replies View RelatedI'm trying to connect with my server via telnet, but when i sent the command (telnet xxx.xxx.xxx.xxx Port) doesn't works and shows then follow error: Unable to connect to remote host: Connection refused, It happens with any port. Is strange but my telnet services works (telnet xxx.xxx.xxx.xxx), In addition, i tried with firewall enabled and disabled and the problem still happens. My centOS run on virtualbox.
View 3 Replies View Relatedevery since i upgraded to 9.10 Karmic Koala i can no longer connect my camera or my camera phone to the computer to get my pics off..
View 2 Replies View RelatedI have two Centos 5 servers one running Asterisk with PHP installed and another sever running as a MySql Database server, at the moment when I try run simple script to see if I can connect to the remote server I get the following error.Quote:Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
View 2 Replies View RelatedI am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View RelatedI am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
I have F14 on a laptop and can't see the laptop screen very well, unless I put my face like right up against the glass, is there a way I can login to my F14 laptop using my windows desktop computer?
whats the easiest way to do that?
I used to use nomachine in previous versions, is that method still used in F14? can't seem to find the FreeNX package anymore.
I used these instructions in previous versions: [URL]
which you'd think would still work in F14, but not sure what happened to FreeNX
otherwise, how do you do it using vncserver? I didn't do it that way in the past because I didn't understand how.
using XFCE window manager in F14 on a windows 7 desktop
Laptop: HP Pavilion dv6-1350us
Desktop: custom build Asus computer using a 23 inch Samsung SyncMaster 226bw LCD display
I am currently trying to upkeep and use my recently deceased fathers ubuntu machines, but as of 6 months ago I had never used Ubuntu or anything like it. I'm not trying to do all that much with it but a few days ago one of the machines lost its ability to connect to the internet, whereas every other machine in the house connects through the router just fine (wireless and ethernet.) I believe i've been able to diagnose part of the problem, the computer cannot connect to a DNS, but I have no idea as how to go about fixing it. My knowledge of Ubuntu is limited to just a few terminal commands. This computer is the one we use to network all of our printers and there are also some critical files on this machine that I need.
View 1 Replies View RelatedHere's a strange one. On my internal network, there are two WinBlows boxes, both connected to my Linux Router/Firewall. Yesterday, I needed to download a file from http://www.freebsd.org. The 1st machine I tried, would not connect from FireFox. When I tried, on the 2nd, it connected immediately. So, I did all the usual "stuff" on the 1st one. Re-booted, as it's WinBlows, cleared browser cache, etc. etc. It still wouldn't connect. BTW, connecting to other web sites was no issue. Just FreeBSD.
So, just for grins, I ran a traceroute from both machines, and here's where it gets freaky. Here's the traceroute from the working machine code...
i have a computer at another house that i would like to controll from my house (both run ubuntu lucid lynx) how do i connect to the other computer using the viewer and remote server pre-installed in ubuntu
View 2 Replies View RelatedI have my Linux box in my Lan environment. I want to connect my Linux computer remotely from my windows PC using command line . how can I connect it remotely over the Lan ?
View 1 Replies View RelatedI just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
I just installed swat, but I'm unable to connect. I read the "man swat" file and it says that I have to modify the /etc/inet.d/swat file, which in my install does not exist; however, I found the /etc/xinetd.d/swat file, and I edited setting disable=no, and also setting only_host=to my ip address. After that I restarted the server "service xinetd restart" because "service inetd restart" doesn't work, so I checked if the port was listening with netstat -l | grep 901. Again no service is listening on that port..
View 1 Replies View RelatedI keep getting this email
httpd failed @ Sat Mar 13 15:26:03 2010. A restart was attempted automagically. Service Check Method: [tcp connect]
Failure Reason: Unable to connect to port 80
Is there anyone who know why this would Happen?
I tried connecting my laptop configured with centos to a wired net connection but i was unable to do so.
when trying to connect i got this
Determining ip address for eth0.... failed
My config :
Dell PowerEdge 2900III
16Gb RAM
2 arrays RAID1 (2*(2*500Gb))
CentOS5.5
VMWare 2.0.2 (with workaround of downgrade glibc to CentOS5.3)
Since the upgrade from CentOS5.4 to CentOS5.5, it seems the sshd is crashing every other day.I can access to the VMWare webserver, but no way to connect through ssh port 22.The only "workaround" is a hard reboot of the server, and with luck, I can access to the server through ssh.I checked /var/log/secure, it looks like time to time when the server start, it does not start the sshd service, there is no entry at all for the time the server started up. For instance today, the server has been started early this morning, but the first entry was found after a hard reboot this evening : Jun 3 18:19:14 hercules sshd[3617]: Server listening on 0.0.0.0 port 22.
I have two computers and I'm trying to get them to talk to each other, but after I installed Fedora 14 on this computer, my other computer can't connect to this.
[code]...
Same with DAAP I'm using rhythmbox to both broadcast and listen to the DAAP, and the rhythmbox on the remote computer cant connect here either. ssh and VNC are working on the other computer as well, I can connect to other computers using ssh on both computers, and I can VNC over to the other computer without any problems, its the traffic going myway that seems to be hitting a roadblock. is it possible that since I installed a different system (was Ubuntu Natty before, and I was using all three services before I installed Fedora), I need to do something on my remote computer so that this won't crop up?
I have Ubuntu 9.10 setup on a test box. I am able to connect to my Win XP box shares but I cannot connect to my Win 7 (64 bit) box I get the usual 'Unable to mount location'. I can get to the Win 7 share from my other Win box so it is a valid share. I also cannot connect via the Remote desktop viewer. I am afraid that if I cannot get this going my Ubuntu experiment i over before it started.
View 2 Replies View RelatedMy desktop doesn't seem to be connecting to the network until I login. This creates a problem if I'm trying to ssh in after a reboot. It's a wired connection. Any ideas?
edit: sorry my internet lagged and the thread got copied
My hard drive crashed and I put in my old one. Re-installed Ubuntu and now my wireless don't connect. I have to choose my network, then enter my password to get it to work.
View 3 Replies View Relatedif I install dhcp ip on my computer, then my computer will not connect to the network, but if I set it up with static ip then my computer will connect to the network. but after 5 minutes later my computer will be mounted from the server dhcp ip. and my computer is not connected anymore to the network dropped out again.
View 1 Replies View RelatedI am attempting to connect to my Windows Computer via a wired network on a sky router. When I tried with PClinuxOS it configured automatically. With the latest version of open SuSe this is quite a bit different. I have got as far as the network being auto and active with an Icon showing on the taskbar. However when I click on the Windows network Icon SuSe tries to locate my Computer but then comes back with "failed to retrieve share list from server". This is as far as I can get after several hours of trying.
View 1 Replies View RelatedHey I just installed linux on my computer and it will not connect to any wireless networks, it will detect them and say try to connect but for some reason wont. It does connect just fine to a wired network.
View 1 Replies View RelatedCentOS 5.5 fresh installed dhclient doesn't work. eth0 configured manually, but network is unreachable. tcpdump shows traffic
lspci -m| grep net
01:05.0 "Ethernet controller" "Realtek Semiconductor Co., Ltd." "RTL-8139/8139C/8139C+" -r10 "ASRock Incorporation" "Unknown device 8139"
lsmod | grep 8139
[Code]....
I am trying to connect a new Ericsson MD400 to my my computer but no way! I cannot make it work. I have tried all sort of advice e.i NetworkManager, ModemManager, HSOconnect, Ozercdoff etc. How do you really use NetworkManager?
View 1 Replies View Related