Networking :: Ping And FTP Connection Works But No HTTP?
Feb 6, 2010
My problem is the following:I can only connect to the internet and download through the FTP, but not through HTTP.I am in a hospital at this moment and have a netbook (Lemote Yeelong). Also there is a computer here with internet access.I would like to access the internet by using the cable from the computer.I configured my netbook just like the local computer (same host name, same MAC address, DHCP), just to be sure.I can ping google.com and I also can download from ftp.debian.org though ftp.However, when I try to connect to google.com through epiphany, it just loads and loads without success
View 4 Replies
ADVERTISEMENT
May 26, 2010
I have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
View 2 Replies
View Related
Jan 23, 2011
Is there any tools in linux same as "http-ping. This tool shows for any request :
1-The HTTP return code (and its brief textual description)
2-The number of bytes returned by the server (excluding headers)
3-The time taken to complete the request (i.e. round-trip time)
View 5 Replies
View Related
Dec 21, 2010
Some time yesterday, I lost the ability to ssh my remote server, or even visit any webpages it hosts.
I've explored hosts.deny, /var/log/secure and even turned iptables off to see if it would fix anything. To no avail. Here's what my ssh login attempt looks like:
Quote:
localhost ~ $ ssh -vv x.x.x.x
OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
[Code]....
View 5 Replies
View Related
Jul 2, 2011
Recently My ISP provider blocked any kind of http proxies can be used in browsers. When I put my proxy settings in my browser, it keeps loading with no response. I've squid proxy running on my own server and worked fine before that modification.
View 3 Replies
View Related
Jan 23, 2010
Objective: access from internet to http and ssh service on LINUX PC with MANDRIVA2009.1 OS in small home net.
Home net: Telekom DSL router w503v version C with direct connections to WindowsXP system, MANDRIVA2009.1 system and Dlink wlan access point. wlan of w503v not active.
MANDRIVA PC has running ssh and http servive, working well in intranet, using fixed IP addresses in same area as w503v (192.168.2.xx).
Did several trials to enable access to MANDRIVA PC from outside via DSL router. Last trial is as follows:
1) http forwarding (Weitereitung) on port 80 to proper 192.168.2.xx
2) ssh redirection (Umleitung) on port 24 to same IP address.
Here it should be noted that http is using predefined web-server in the router and that "ssh" is specified in an empty input box (offer is only second web-server).
For DNS the DynDNS support is successfully applied with manual adjustment of provider IP address.
Result:
- In intranet, i.e. clients with IP address 192.168.2.xx both http and ssh work with resolved DynDNS name.
- In internet http works without observed problems, shh is not responding on port 24. Also ping does not work.
View 4 Replies
View Related
May 13, 2011
Even ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
View 10 Replies
View Related
May 20, 2011
When I ping a destination IP address, it responds. However, when I try to telnet or ftp or sftp to the same IP address, it does not connect.
I do not know the physical location of the machine.
View 11 Replies
View Related
Aug 2, 2010
I'm trying to install Mandriva Spring 2010 for a friend on his laptop after MS Windows crashed. The installation appeared to work, but I've got an odd networking problem - firefox is unable to load URLs. Every URL I try returns a server not found error.
When I drop into bash I'm able to do the following
Code:
ping 66.102.9.103
ping google.com
However when I try
Code:
wget http://google.com
I just get a message that tells me that wget is "unable to resolve host address google.com'". This is odd - ping is able to resolve google.com, but wget isn't. I assume that firefox and Konqueror both have the same problem. Could it be cause I've specified the http protocol?
View 11 Replies
View Related
May 8, 2010
I have problem in making connection to my vpn server I can make connection from windows xp to that but can not open any website and I can not ping 172.16.10.1 when connection established.
These are my configuration files:
server config file:
Quote:
client configuration file:
Quote:
And this is my server syslog tailed file:
Quote:
And I added this routing to /etc/rc.d:
Quote:
And this is my iptable:
Quote:
And vpn connection is lost after establishing a lot.
View 4 Replies
View Related
Jun 17, 2009
Since I installed FC11 I can't get vpnc to work (I always getno response from target").Also I can't ping any external IP even with the firewall disabled.What I see strange is that I had the same configuration in FC10 and the router configuration seems okay to me:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0
[code]...
View 3 Replies
View Related
Dec 3, 2010
My Windows machine can ping Ubuntu by name, but Ubuntu can only ping the Windows machine by using it's IP address. This was working fine in both directions until I purged Samba. After purging Samba, I couldn't ping in either direction unless I used the IP address. I did some reading and found that Samba provides NetBIOS functionality that allows the machines to resolve host names without a DNS. Since I'm not running a local DNS, I decided to reinstall Samba. Unfortunately, I've not been able to restore it to full working condition. I don't want to use hosts files as all the IP addresses are assigned automatically by DHCP. I want to be able to access the Windows machine by name.
View 9 Replies
View Related
Sep 3, 2010
I can't ping by netbios name or fully qualified domain name, BUT nmblookup works just fine. I know it's a dns problem(s) I just don't know what or how to fix it. I'm very new to all of this(networking, domain administration, posting on forums etc) so I hope this is the right way to ask for help here. I've searched around the forums and the internet for a bit but I haven't found a solution to my problem yet.
here is some background on how the network is setup2 different domains sharing the same dhcp scope.
DC for DomainA is running windows 2003 std
DC for DomainB is running windows 2008 sbs
DC-A has ip of 192.168.1.249
DC-B has ip of 192.168.1.3
router is sonicwall (192.168.1.1)
DC-A is hosting both DHCP and DNS
there are 25 computers in DomainB and 1 computer (not in domain) with ubuntu 10.04 and Free Open Ghost running on it (dhcp off) all 25 computers can ping the fog server by name (and eachother) all 25 computers pxeboot to fog just fine
[Code]...
View 1 Replies
View Related
Dec 4, 2010
I've encountered a problem after doing a fresh install with xubuntu 10.10 (2.6.35-23-generic).some sites are blocked like [url]....if I do dig [url]....- I receive the A, CNAME records and the IP address and everything.when ping[url].... - I receive 'unknown host'.when ping <theipaddress> - I receive responses
View 2 Replies
View Related
Jul 28, 2010
I'm trying to do a SSH connection between my home and work PC both machines are running ubuntu 10.04. I have read all the comunity documentation at [URL] from Work PC. I went on to the web site what is my ip address and noted down the number, From Home i opened a terminal and typed: pnig (ip address). to which their was no reply, now i'm assuming i need to configure the works router to except connection requests, is this Correct?
Also what information do i need from my works network and how do i get it? I understand that I need the routers expernal ip address, but how do i referiance a specified computer after that address? What program do i use in ubunu and how is that information applied to it?
View 4 Replies
View Related
Feb 5, 2010
I posted this already in the absolute beginner section, but no answer was found, so I thought I might try this place..Long story as short as possible:
- I installed Ubuntu 9.10 for a friend who was fed up with WinXP crashing all the time
- After the install, networks was broken. I could ping sites outside the LAN, could connect to the router via firefox, but NO application could access the web. - The router works just fine, I tried with my own notebook.
- Disabling ipv6 in grub (edit /etc/default/grub and 'sudo update-grub') seemed to solve the problem.
- Then update the standard packages + install restricted extras and boom, Network gone: No ping to sites outside the LAN, no nothing. Still can connect fine to the router and even the remote desktop connection works, connecting over the internet. But that's it.
I have tried setting the mpu to a value recommended by my isp, I have set static ip and dns, I really don't now what to try any more.
View 6 Replies
View Related
Jul 15, 2011
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
View 2 Replies
View Related
Jul 28, 2010
Can you find my blind spot? I had PuTTY up & running untill I did a reinstall of Fedora13.I can ping 192.168.1.163 fine. SELinux is disabled. Firewall is default (SSH allowed on p22).I have just disabled the firewall with same result)
PuTTY reports:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.07.20 16:23:52 =~=~=~=~=~=~=~=~=~=~=~=
Event Log: Writing new session log (SSH raw data mode) to file: C:UserswimDesktopputty.log
[code]....
View 8 Replies
View Related
Feb 4, 2010
Previously posted under "Wireless Connection Can't Even Ping Router".I've been using Ubuntu for two years. About a year ago I switched to Kubuntu because I prefer the KDE desktop. Two weeks ago I bought a new laptop: Dell Vostro v13. I installed Kubuntu 9.10 from the live CD and everything worked! Well, almost. I also set up a home wireless network with a new Belkin N+ router from WalMart. When I try to connect to my router, the Plasma Network Manager reports that I'm connected and the assigned IP address, but I'm not truly connected! I can't even ping my own router, all packets are lost.
This problem is intermittent, sometimes I connect fine. I dual-boot with Windoze7 and it connects without problems. Also, if I connect with Windoze, then re-boot into Kubuntu, it seems to "wake-up" the connection somehow and it works. I might also add that I connect without difficulty to other routers in my neighborhood, at work, in airports, etc.My old laptop was also running Kubuntu 9.10, and it connected to the Belkin router without problems, although it was a different wireless card and driver. I also tried Ubuntu 9.10 from the live CD and it also reported a connection, IP address, etc. I couldn't ping the router from that connection either!
View 7 Replies
View Related
Jun 7, 2010
when I was still at my university room where the connection would work after a few reboots. After moving back home the connection worked on and off for a day before not working at all. NetworkManager is telling me that I am connected and have an ip address, etc, but nothing is able to get an internet connection. I am able to ping myself but am not able to ping my router. Everything works fine on M$ and other PC's on the network, it's just my ubuntu 10.04 that is playing up.
View 9 Replies
View Related
Feb 21, 2011
when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2 but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes
View 10 Replies
View Related
Mar 18, 2010
I have an ubuntu kk laptop connected via wireless to my mixed network (xp, win7, other ubuntu), but i can not ping said machine or connect via ssh. Internet and smb-browsing ON this machine work, as does pinging FROM it. If this was a windows machine, I'd say a firewall is in the way, but since it's a vanilla karmic install, this should not be the case (or should it?).
View 2 Replies
View Related
Dec 13, 2009
I've got two routers, 10.0.0.0/23 and 192.168.2.0/24, which are joined by a Linux box with interfaces eth0 (10.0.0.2) and ra0 (192.168.2.2). I've got masquerading for ra0, and a route to 192.168.2.0/24 on 10.0.0.0's router. I CAN ping hosts on 192.168.2.0 from 10.0.0.0 just fine, but I CANNOT access web pages.Strangely, If I enable masquerading on eth0, and add a route to 192.168.2.0s router to 10.0.0.0, I can ping AND access web pages from 192.168.2.0Here is my current iptables
Code:
*filter
:INPUT ACCEPT [0:0]
[code]...
View 14 Replies
View Related
Jun 1, 2011
I just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
View 1 Replies
View Related
Dec 16, 2009
There is a strange thing going out there in my box, I've tested b43-fwcutter on wpa-psk encrypted network, and there was no problem connecting (my card is broadcom 4318), recently I was trying to connect to WEP encrypted network without success. Network connection tested on other laptops (Vista, XP machines)so there is no possibility that the key isn't valid.
View 6 Replies
View Related
Sep 27, 2010
Using netcat, nc(1), craft a valid http/1.1 request for getting http headers (not the html file itself!) for the main index page of www dot aalto dot fi. What request method did you use? Which headers did you need to send to the server? What was the status code for the request? Which headers did the server return? Explain the purpose of each header.
nc -v www dot aalto dot fi 8080
HEAD / HTML/1.1
host: www dot aalto dot fi
And it returns:
200 OK
Content-Length: 858
Content-Type: text/html
Last-Modified: Thu, 02 Sep 2010 12:46:01 GMT
[Code]....
I really don't know what does it mean. Question 2: Using netcat, nc(1), start a bogus web server listening on the loopback interface port 8080. Verify with netstat(, that the server really is listening where it should be. Direct your browser to the bogus server and capture the User-Agent: header "Direct your browser to the bogus server and capture the User-Agent: header" I don't understand this question.
View 2 Replies
View Related
May 9, 2011
I had setup an SSL secure server awhile back, such that: [url] works but [url]does not (note the different: in the first, I use HTTPS, whereas the second I use HTTP) How can I get both to co-exist?
View 7 Replies
View Related
Jan 3, 2010
It's been a while since i've been trying to deal with this problem but it was useless. I've found many related problems to this, most unsolved and those who had solution wouldn't work for me. I have few mates who have the same problem and still didn't find a solution as well. Here's the problem:
Both on my Desktop and Laptop, the network manager won't recognize that there is a cable pluged on the computer so that it would start my connection. The solution to make it work is pretty simple and its everywhere: use pppoeconf.
Altough that does the trick to make my internet work, i get another problem that i found out to be related to this one, which is: I can't use VPN. Which make me assume that one problem is related to the other, is that on my laptop, which has wireless internet, ubuntu will recognize it and then i can simple use vpn. My desktop, on the other hand, isn't that lucky and does not have wireless, so i can't just use vpn. So far, i've been using vpn on windows when needed, but switching systems is really a pain, not to say i'd rather do that on ubuntu.
Few other suggested solutions were to use 'wicd' and other network managers, altough for some people that did work accoding to what i saw on boards, that didn't really work out for me as well. Wicd coldn't recognize it either. Other suggestion was to check on some txt file on ubuntu, erase few information and let it 'fill up' automatic, it didn't work as well(sorry i don't remember all details on this one).
This problem happened on:
First, wubi for ubuntu 9.04
Ubuntu 9.04(normal install.)
Ubuntu 9.10
Happened both on my Desktop and my notebook, but the same version i installed on both of them were used on other computers and they did work on them so i strongly believe it has to do with the os itself.
View 2 Replies
View Related
Jan 9, 2011
I have a usb modem which I plug into my ubuntu 10.10 system for a dial-up service. The modem is recognised by wvdial and dials properly, but the connection is not established.I get "Unable to run /usr/sbin/pppd" (although pppd is certainly in /usr/sbin), followed by "Check permissions of specify a 'PPPD Path' option in wvdial.conf", and finally "Connected, but carrier lost", then it gives up.
View 5 Replies
View Related
Sep 7, 2010
I have my Linux laptop running Katatonic Koala at the moment. It is connected via CAT5 to a switch. The switch then connects to my router. All five of my computers are connected to the switch, actually. The only one that won't talk to any sites other than https secure sites is the Linux box. I am not well-versed in the inner workings of Linux and need some help in what I need to do so that regular http sites work. You guys always have the right anwers so I will wait humbly for your replies.
View 8 Replies
View Related
