have fedora 10 and am having problems with ssh. For some reason I can't connect via a remote host to my ssh. Local network connections do work just fine. I have been looking for a log of what is going on but have not had luck seeing anything.Things I have tried:
-Modify hosts.allow to allow ssh to all
-generated rsa1 key identity tryed specifying that with the -i option on the guest computer
[code]...
I did a clean install of the latest version of Ubuntu. For some reason, there are still internet-issues. When I tried out the following command
Code:
telnet
open ftp.microsoft.com 21
I got
Code:
telnet: Unable to connect to remote host: Connection timed out
Also, during install of the new ubuntu, it was unable to reach the repos for downloading. Odd thing is that I can go online, and that when I type 'ftp.microsoft.com' in my browser, it displays the file-hierarchy.
I am running CentOS 5.1 on VMware on Win 7 On CentOS I added Bridged network adapter and the server is connected to internet without any problems, but when I telnet any server on port 25 I get connection timeout.
Code:
telnet f.mx.mail.yahoo.com 25
Trying 98.137.54.237...
telnet: connect to address 98.137.54.237: Connection timed out
telnet: Unable to connect to remote host: Connection timed out
I stopped all servers, iptables and sendmail on the linux server and the firewalls on the win 7 but still getting the same error! I added new network adapter ( host-only ) and tried to telnet the win machine from vmware Linux but I got connection refused
Code:
telnet 192.168.71.1 25
Trying 192.168.71.1...
telnet: connect to address 192.168.71.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
[code]....
When i am trying to telnet to a machine connected in our LAN ..
telnet: Unable to connect to remote host: Connection refused
What's the reason for this? how do i establish a connection? I am using ubuntu 10.04.
telnet localhost the output is...
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
I don't understand what is the problem. Its not configured properly how do i configure it?
I'm trying to connect with my server via telnet, but when i sent the command (telnet xxx.xxx.xxx.xxx Port) doesn't works and shows then follow error: Unable to connect to remote host: Connection refused, It happens with any port. Is strange but my telnet services works (telnet xxx.xxx.xxx.xxx), In addition, i tried with firewall enabled and disabled and the problem still happens. My centOS run on virtualbox.
View 3 Replies View RelatedI am doing some R&D on 11g RMAN in oracle at home. i have installed oracle enterprise linux and i have installed oracle software. when i am trying to configure listener, it is error-ed out. i have verified that telnet with the port is not working and i am seeing connection refused error.
View 3 Replies View RelatedRight now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies View RelatedI have a box (boell) running Fedora 10 sitting behind a firewall at school. I am able to freely ssh to and from this box to other computers (minion) within that lan. Outside of this network I cannot directly ssh to boell - I must ssh first to minion, then I can ssh to boell. I've spoken with the sysadmin and he's verified that the firewall permits ssh freely - i haven't had any issues like this with other boxes of mine there, so this isn't any surprise.
I have verified that the hosts.deny file is blank, iptables permits ports 22 (and 80) and I didn't see anything obvious in the sshd_config. I tried a tcp dump on the external host and boell while attempting to ssh from the former to boell. The packets appear to be acknowledged by boell, but this fails to lead to a connection. I've tried this process with external hosts in different locations with the same result. I have made few modifications to the default installation for F10, so perhaps there is some default somewhere I have to change. In any case, below I have attached excerpts of germane files.
======== ssh from boell =======
[root@boell log]# ssh -vvv 71.189.5.67
OpenSSH_5.1p1, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
[code]....
I installed dovecot on my server and now the imap and pop3 ports are open.But when I want to telnet it, it's not possible.Code: Trying 127.0.0.1...telnet: Unable to connect to remote host: Connection timed out.Also I can't any ports else. But I can connect to it from other computers. I tried to connect to this from my PC and it was successful.
View 7 Replies View Relatedlpr: can't connect to remote host (127.0.0.1): Connection refused
[root@l-GZ:/]# usb 1-1: new full speed USB device using sl811-hcd and address 3
When I do a ntpq -p on my machine I could see the ntp servers configured and it's status:
But when I telnet to ntp server "10.1.35.2" it says A remote host refused an attempted connect operation:
I know * here represents that the machine is in sync with ntp server. My question if the machine is in sync with ntp server, how does it work?why ntp port 123 is connection refused?
My system is Ubuntu 11Before I typed "telnet localhost" or "telnet localhost 23". I have make this work below:$sudo apt-get install xinetd$vim /etc/xinetd.conf
defaults{
instances=60
log_type=SYSLOGauthpriv
[code]....
I am using TomCat6 with Ubuntu Server 9.10 x64. I successfully configured to iptables to redirect the port "443" to "8443" (Tomcat SSL), using this command:
[code]...
when i try a telnet to a host like that: telnet 10.10.10.10 1234 i got this: telnet: Unable to connect to remote host: Connection refused.
1/ does this mean that the problem is not due to a firewall, but that the host 10.10.10.10 doesn't listen on the port 1234? other way does this mean that my firewall is authorizing traffic on the port 1234?
and when i try a telnet on another port like that: telnet 10.10.10.10 1235 i get: Trying 10.10.10.10 ...
in this case this
2/ does this mean that the firewall is blocking the traffic between my host and the 10.10.10.10 on the port 1235?
I did followings:
Code:
But got:
Code:
But as I tried:
Code:
It's OK.
I have my desktop computer (running F13) configured to accept ssh over port 22 via the firewall configuration tool. If I type ifconfig -a, this computer, which is running on my wireless network, tells me:
Code:
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
However, if I go to my laptop computer (also running F13) and try and ssh into the desktop, i.e. ssh icthy@192.168.1.100, I get this response:
Code:
ssh: connect to host 192.168.1.100 port 22: Connection refused.
I guess I am confused to what is blocking the connection? Is there another means on F13 other than the default Firewall? I haven't really messed with the network at all. For what it's worth, I am hoping to set things up so I can just ssh into the computer name, (ssh icthy@desktop) eventually, but want to start with the IP. So, can anyone offer a hint as to what I can look for that is blocking port 22?
how to connect fedora 10 using remote desktop? i have a notebook and a desktop. both machine is in same LAN. and Both machines are using fedora 10. i would like to access my desktop from my notebook. how to do this? i have installed the remote desktop. and vnc viewer. but couldn't get thorugh it...
i have done this.
1. sudo yum install vino
2. intall vnc viewer.
i have a udp server running at port 60178. when i connect to it from localhost there is no problem. when i use the client from a remote host i am not able to connect. I changed my server firewall settings[Fedora 11] and added "udp 60178" to trusted ports but still nothing happened. I ran wireshark and observed that packets are coming to the server machine but server returns a "Port Unreachable" ICMP message and doesnt give the packet to the application.
View 3 Replies View RelatedWhen I try to connect to my SUSE server from other one this appears: Remote host identification has changed. I deleted entry in know_hosts but it still working wrong, showing me this message. What could be the cause of this problem??
View 1 Replies View RelatedI install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
i try to connect to a specific ip address with ssh i have installed the ssh server and client. i also try it by connecting with localhost without any problem. But i keep taking this message if to try to connect to the ip address. i checked my hosts.allow and hosts.deny files and all are commented in there (i think tha this should not be the problem).
View 2 Replies View RelatedI need to be able to use an rsync command in script that will be run by cron. And it needs to be able to pass a password to rsync so that the remote server it's connecting to will authenticate.
I cannot set up ssh keys between the two servers, it's not an option. I cannot use any other language other than bash, it's my only option. I know this is highly insecure, I have no other option.
So far I have this:
rsync --rsh="/usr/bin/ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o PreferredAuthentications=password" -raxv /source/dir/* user@remotehost:/target/directory/.
This allows the script to ignore host verification and goes directly to the password prompt. I need the script to fill in this password prompt with the password that is stored in a variable.
I tried using expect, but I honestly don't know the syntax, it just keeps failing. A lot of the examples I'm finding online for expect starts off with a "spawn", which i don't have installed, and not sure if I have the ability to install it yet.
I'm trying to make an SSH script for my place of employment. This script, I want to go out to the server hostnames we have specified (in another file) and change a users account password. We use Kerberized telnet, so if telnet root hostname fails, I want it to use ssh username hostname and use the old password (specified). If both fail, I want it to ask the user what the port should be and input the port in the ssh command.
But I'm having a issue having it try telnet root hostname and if it fails then, try to ssh in, I have no clue how to have it proceed. Is it an if statement? Here's the telnet failed message: telnet: Unable to connect to remote host: Connection refused
I have succeeded in using Remote Desktop Viewer to make a VNC connection to a remote WAN computer and it was quick enough to manipulate the remote computer in real time.I found the host name by getting the remote target computer to put the following url into a browser - http://www.showmyip.com/ - It returned the address for the router which I put into the Host: text entry box in the Remote Desktop Viewer window. E.g. for my computer at the time of submitting my enquiry the address was 'host81-129-54-226.range81-129.btcentralplus.com'.The remote router that I connected to needed to have the port 5900 forwarded to the remote target computer.I now want to progress to running VNC through a SSH tunnel for additional security. In the Remote Desktop Viewer there is a configuration line
'use host' <text box to enter host name> 'as a SSH tunnel'.What is the correct syntax to enter in the text box? It would help my understanding if you used the example address above as a basis for a response.Many unexpected connection attempts reported on my router, if that was you, thank you for the novel way in responding to the question and providing the syntax.The 'bible' on syntax appears to be found here:- http://unixhelp.ed.ac.uk/CGI/man-cgi?ssh+1
Is there any one know how to deploy a remote OS installation for a host with public network address? In a LAN with private network, we can use PXE, kickstart... but what we could do with the hosts have only public ip address?
View 2 Replies View Relatedway to redirect the audit daemon message to a remote host I checked the auditd.conf and it's man page and find that the log location is specified by the line log_file = file_path and in the man page
Quote:
"log_file: This keyword specifies the full path name to the log file where audit records will be stored. It must be a regular file."
does this mean that the auditd does not have the function to redirect the logs to a remote hosts.
is it possible using a perl script to test for a socket listening on a UDP port on a remote host ?I work in an environment where netcat is not allowed and from time to time I need to see if a UDP port is open on a remote host.
View 6 Replies View RelatedMy SSH client for remote machine will sometimes hang. I have to wait until the session is finished hanging, I guess, to login with SSH again. I would get some message about multiple users or something.
I haven't been able to login this time for over 1 day. It's started saying something about Tcl_InitNotifier: unable to start notifier thread. My host can access the machine locally to fix this, but what is going on? Why is this occurring?
Here is the login attempt:
Code:
We recently had a vulnerability scan done on our network and one of the vulnerabilities was that the dns server discloses the remote host name when using hostname.bind.
Is there any way that we can stop this from happening? Our name server is a Fedora 11 machine.