Software :: Lpr - Can't Connect To Remote Host - 127.0.0.1 - Connection Refused
Mar 26, 2011lpr: can't connect to remote host (127.0.0.1): Connection refused
[root@l-GZ:/]# usb 1-1: new full speed USB device using sl811-hcd and address 3
ADVERTISEMENT
General :: Telnet :Unable To Connect To Remote Host:Connection Refused?
Jul 3, 2011My system is Ubuntu 11Before I typed "telnet localhost" or "telnet localhost 23". I have make this work below:$sudo apt-get install xinetd$vim /etc/xinetd.conf
defaults{
instances=60
log_type=SYSLOGauthpriv
[code]....
Ubuntu Security :: Unable To Connect To Remote Host: Connection Refused
Jul 5, 2010I am using TomCat6 with Ubuntu Server 9.10 x64. I successfully configured to iptables to redirect the port "443" to "8443" (Tomcat SSL), using this command:
[code]...
Ubuntu :: Telnet: Unable To Connect To Remote Host: Connection Refused
Jul 16, 2010when i try a telnet to a host like that: telnet 10.10.10.10 1234 i got this: telnet: Unable to connect to remote host: Connection refused.
1/ does this mean that the problem is not due to a firewall, but that the host 10.10.10.10 doesn't listen on the port 1234? other way does this mean that my firewall is authorizing traffic on the port 1234?
and when i try a telnet on another port like that: telnet 10.10.10.10 1235 i get: Trying 10.10.10.10 ...
in this case this
2/ does this mean that the firewall is blocking the traffic between my host and the 10.10.10.10 on the port 1235?
Networking :: Telnet: Unable To Connect To Remote Host: Connection Refused
Jun 12, 2011I am running CentOS 5.1 on VMware on Win 7 On CentOS I added Bridged network adapter and the server is connected to internet without any problems, but when I telnet any server on port 25 I get connection timeout.
Code:
telnet f.mx.mail.yahoo.com 25
Trying 98.137.54.237...
telnet: connect to address 98.137.54.237: Connection timed out
telnet: Unable to connect to remote host: Connection timed out
I stopped all servers, iptables and sendmail on the linux server and the firewalls on the win 7 but still getting the same error! I added new network adapter ( host-only ) and tried to telnet the win machine from vmware Linux but I got connection refused
Code:
telnet 192.168.71.1 25
Trying 192.168.71.1...
telnet: connect to address 192.168.71.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
[code]....
Networking :: Telnet: Unable To Connect To Remote Host: Connection Refused - LAN
Nov 10, 2010When i am trying to telnet to a machine connected in our LAN ..
telnet: Unable to connect to remote host: Connection refused
What's the reason for this? how do i establish a connection? I am using ubuntu 10.04.
General :: Telnet - Unable To Connect To Remote Host - Connection Refused
Sep 11, 2009I did followings:
Code:
But got:
Code:
But as I tried:
Code:
It's OK.
CentOS 5 Networking :: Unable To Connect To Remote Host: Connection Refused
Feb 5, 2009telnet localhost the output is...
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
I don't understand what is the problem. Its not configured properly how do i configure it?
Red Hat / Fedora :: Telnet - IP - Is Giving Unable To Connect To Remote Host - Connection Refused
Nov 26, 2010I am doing some R&D on 11g RMAN in oracle at home. i have installed oracle enterprise linux and i have installed oracle software. when i am trying to configure listener, it is error-ed out. i have verified that telnet with the port is not working and i am seeing connection refused error.
View 3 Replies View RelatedCentOS 5 Networking :: Error: Unable To Connect To Remote Host: Connection Refused, It Happens With Any Port
Feb 11, 2009I'm trying to connect with my server via telnet, but when i sent the command (telnet xxx.xxx.xxx.xxx Port) doesn't works and shows then follow error: Unable to connect to remote host: Connection refused, It happens with any port. Is strange but my telnet services works (telnet xxx.xxx.xxx.xxx), In addition, i tried with firewall enabled and disabled and the problem still happens. My centOS run on virtualbox.
View 3 Replies View RelatedProgramming :: Script - If Telnet Root Hostname Fails Then Try To Ssh In - Error "Unable To Connect To Remote Host: Connection Refused"
May 11, 2010I'm trying to make an SSH script for my place of employment. This script, I want to go out to the server hostnames we have specified (in another file) and change a users account password. We use Kerberized telnet, so if telnet root hostname fails, I want it to use ssh username hostname and use the old password (specified). If both fail, I want it to ask the user what the port should be and input the port in the ssh command.
But I'm having a issue having it try telnet root hostname and if it fails then, try to ssh in, I have no clue how to have it proceed. Is it an if statement? Here's the telnet failed message: telnet: Unable to connect to remote host: Connection refused
General :: NTP - Remote Host Refused An Attempted Connect Operation
Jul 24, 2011When I do a ntpq -p on my machine I could see the ntp servers configured and it's status:
But when I telnet to ntp server "10.1.35.2" it says A remote host refused an attempted connect operation:
I know * here represents that the machine is in sync with ntp server. My question if the machine is in sync with ntp server, how does it work?why ntp port 123 is connection refused?
Slackware :: Could Not Connect To Host 127.0.0.1 - Connection Refused
Dec 7, 2010I am getting this error message on ktorrent on slackware 13.1 64. Few days ago I was using ktorrent for torrent downloads and it was fine, but not i can't star any download or any kind of torrent, it just keeps returning the error and it's not working at all.
View 1 Replies View RelatedNetworking :: Ssh: Connect To Host 192.168.1.11 Port 22: Connection Refused
Dec 11, 2010I cannot use GRsync from Ubuntu Desktop to PCLinuxOS laptop.The 2 computers can ping each other. I have disabled both firewalls. My laptop IP address is 192.168.1.11This is the error on Ubuntu Grsync:
ssh: connect to host 192.168.1.11 port 22: Connection refused
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.7]
Rsync process exit status: 12
On PCLinuxOS it wont say Ethernet is connected when trying a static address setup.However it does connect to the internet via auto Ethernet setup and a LAN cable. It then says connected. In order to use SSH and GRsync what programs are required? I have these installed on both machines: grsync openssh-client openssh-server
Networking :: Ssh - Connect To Host 10.137.216.170 Port 22 - Connection Refused
Jun 15, 2011I am facing trouble to scp from server to to my local machine where as the vice-vesra is working fine.
The error is like below.
lost connection
CentOS 5 :: Ssh: Connect To Host 111.222.33.44 Port 22: Connection Refused
Sep 12, 2010I have become convinced that rsync for CentOS 5 is broken. I'm trying to set up automatic backups between 2 servers in 2 different countries using rsync under CentOS 5.I can get manual backups to work between the 2 servers by doing two things I shouldn't need to do, but automatic backups fail and I see no solution.Here are the problems I am encountering: According to the instructions I've read everywhere, I am to set up two configuration files:
/etc/rsyncd.conf
/etc/rsyncd.secrets
When I run rsync from root, it apparently just totally ignores these two files. No custom greeting, no log, no password used.
Even when I specify --password-file=/etc/rsyncd.secrets in the command line, it still ignores it. I am prompted and I must enter the password manually. Let me back up a moment. After first installing rsync, when I ran any command to access the root server, I get this error:
ssh: connect to host 111.222.33.44 port 22: Connection refused
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at io.c(463) [sender=2.6.8]
I read everywhere that rsync uses port 873, not port 22 which is used for SSH. Why is rsync on CentOS trying to use port 22?I have SSH switched from port 22 to another port (let's call it 5432 here) and block port 22.So, I have added this to the command line:
--rsh='ssh -p5432'
Then I get a connection ...
... but it prompts me for my password. It doesn't matter that I have my username and password, same one, in /etc/rsyncd.secrets on both servers. It still asks.And it rejects my password!The only way I can get it to connect is by creating an SSH user on the remote server for this.Even then, rsync STILL prompts me for a password, even though:
1. the username and password are specified in the /etc/rsyncd.secrets files on both servers
2. I've added the command line parameter --password-file=/etc/rsyncd.secrets Therefore, it is totally impossible to use an any cron job or other automatic synchronization, under CentOS 5.
rsync -av --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* rsyncusername@111.222.33.44:httpdocs/rsync
rsync -av --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* 111.222.33.44:httpdocs/rsync
rsync -av --verbose --progress --stats --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* rsyncusername@111.222.33.44:httpdocs/rsync
Yes, I have made sure that I have the latest rsync. I have run yum update for everything.Yes, I have double checked, triple checked, and quadruple checked my config files.
Fedora Networking :: Ssh: Connect To Host 192.168.1.100 Port 22: Connection Refused
Nov 27, 2010I have my desktop computer (running F13) configured to accept ssh over port 22 via the firewall configuration tool. If I type ifconfig -a, this computer, which is running on my wireless network, tells me:
Code:
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
However, if I go to my laptop computer (also running F13) and try and ssh into the desktop, i.e. ssh icthy@192.168.1.100, I get this response:
Code:
ssh: connect to host 192.168.1.100 port 22: Connection refused.
I guess I am confused to what is blocking the connection? Is there another means on F13 other than the default Firewall? I haven't really messed with the network at all. For what it's worth, I am hoping to set things up so I can just ssh into the computer name, (ssh icthy@desktop) eventually, but want to start with the IP. So, can anyone offer a hint as to what I can look for that is blocking port 22?
Ubuntu One :: Ssh:connect To Host Restart Port 22: Connection Refused
Feb 20, 2010I am getting "ssh:connect to host restart port 22: Connection refused" error when trying to start "ssh" in Ubuntu. I uncommented the port 22 in ssh_config, I dont have iptables setup...Did try to check if the port is listening using the netstat -an | grep "LISTEN" & couldnt find.
View 9 Replies View RelatedUbuntu :: Ssh: Connect To Host Stop Port 22: Connection Refused
Jul 21, 2011I'm having problems with ssh and don't know what else to do. I keep getting "ssh: connect to host stop port 22: Connection refused" when i try to stop or start ssh:
[Code]....
Software :: Ssh - Connect To Host Restart Port 22 - Connection Refused
Feb 19, 2010I am getting "ssh:connect to host restart port 22: Connection refused" error when trying to start "ssh" in Ubuntu. I uncommented the port 22 in ssh_config, I dont have iptables setup...Did try to check if the port is listening using the netstat -an | grep "LISTEN" & couldnt find.
View 14 Replies View RelatedUbuntu Networking :: Ssh: Connect To Host Srv3 Port 22: Connection Refused
May 4, 2011I have installed ubuntu 11.04 and I'm now trying to connect to existing SUSE servers on the LAN. My home directory has a shared NFS mounted home on the SUSE servers while my home on the ubuntu machine is local. I can log in using ssh to all the SUSE servers except one. I get:
ssh: connect to host srv3 port 22: Connection refused
If I use the IP address of srv3 directly it works. Also, before I changed the default machine name ("ubuntu") I could log into srv3.
nslookup srv3 works OK.
ping srv3 works OK.
Even if I completely delete the .ssh directory in both my ubuntu home and in my shared home on the SUSE servers I still cannot log in using the srv3 name, only direct IP address works. I'm thinking that the login I did to srv3 before I changed the machine name for the ububtu machine must have goofed up something
Ubuntu Networking :: Unable To Connect To Remote Host - Connection Timed Out
Dec 13, 2010I did a clean install of the latest version of Ubuntu. For some reason, there are still internet-issues. When I tried out the following command
Code:
telnet
open ftp.microsoft.com 21
I got
Code:
telnet: Unable to connect to remote host: Connection timed out
Also, during install of the new ubuntu, it was unable to reach the repos for downloading. Odd thing is that I can go online, and that when I type 'ftp.microsoft.com' in my browser, it displays the file-hierarchy.
Server :: Connection Refused By Host ?
Aug 17, 2011I am experiencing a problem with Nagios running some checks on our Ubuntu 10.04 servers.
we have 16 Nos HDD in each servers. These HDD's are checking by nagios with CPU and users.
For whatever reason, all of the checks will come up with the response: "Connection refused by host".
We have checked the server at the time of occurence and all seems fine. No memory issues, no CPU issues etc.
Then within 5-10 minutes the problem goes away.
OpenSUSE Network :: 11.2 - SHH Connection To Host Refused
Aug 5, 2010I am running 11.2 and set ssh to boot at runlevel 3 and 5 through yast and started the service through the terminal. I have turned off the firewall on my wireless router and in the local firewall. When I try to connect from a machine in my office, I get the following
Code:
ssh: connect to host xx.xxx.xx.xxx port 22: Connection refused
When I run telnet from the machine, I get:
Code:
telnet: connect to address xx.xxx.xxx.xx: Connection refused
telnet: Unable to connect to remote host: Connection refused
netstat -tlnp on my machine shows:
Code:
tcp 0 0 :::22 :::* LISTEN 31622/sshd
General :: Sendmail Connection Refused By Host
Jan 13, 2010Is the following sendmail scenario possible? If yes, what modification(s) should be made, in order to work?
system1 with host1 - where the sendmail is executed
system2 with host2 - where the destination email address is stored
When trying to sendmail from host1 to an email address stored on host2. but with the format username@host1, the sendmail service returns Connection refused by host1.
Software :: Check_log Nrpe Error: Connection Refused By Host?
Jun 29, 2011Please help me figure out what's wrong. Other nagios check for the same host is working except for this one.In <hostname>.cfg of nagios server, I need to add this to check for a specific pattern in the host's log:Quote:
define service{
use production-logs
host_name hostname
[code]....
Ubuntu Networking :: Telnet To Port 25; Connection Refused For All But Local Host
Jan 12, 2010I can telnet (while on the actual machine) using
Quote:
telnet localhost 25
When I try and use the local machine's ip
Quote:
telnet 192.168.100.9 25
I get
Quote:
Trying 192.168.100.9...
telnet: Unable to connect to remote host: Connection refused
[Code].....
This last one is strange as I the IP looks odd.
What I am doing wrong, and how do I fix it. After much surfing many mosts say that telnet is not used anymore but I want to use it to test my smtp server.
Server :: IPtables - SSH Running On Port 2298 (Host Connection Refused)
Aug 1, 2011I have 2 servers..
let say server A and server B
On server A open ssh is configured and is running on port 2298. So from my machine I can login there using ssh on port 2298
But when I login to server B and from there I try to connect to server A I cannot.
ssh: connect to host <ipaddress here> port 2298: Connection refused
General :: Check_NRPE From Ubuntu Server To OpenWRT Router - Connection Refused By Host
May 23, 2011I am trying to monitorize an OpenWRT (Backfire 10.03, r23115) router from an Ubuntu server, but I am having some problems. I have installed Nrpe (2.12) on the remote host (OpenWRT), I have executed the program as a deamon (/usr/sbin/nrpe -d) but when I start the NRPE deamon, I don't get anything about NRPE executing netstat -at or ps -ef.I would need to install check_nrpe on OpenWRT to find out if NRPE is working, but I can't find any ipk package with it. Now, once in the monitoring host when I try to reach the remote host from the server:
/usr/local/nagios/libexec/check_nrpe -H ip_remote_host
I get: Connection refused by host
Even, trying with localhost:
/usr/local/nagios/libexec/check_nrpe -H localhost
I get the same error: Connection refused by host
I have installed Nagios Plugins and the check_nrpe plugin. I have edited the /etc/nrpe.cfg file:
allowed_hosts=127.0.0.1 ip_server
I don't exactly know if it is remote host's fault, monitoring host's fault or both.
Ubuntu Networking :: Remote Server 11.04 Connection Refused When Monitor Not Connected
Jul 14, 2011i done desktop config in ubuntu server 11.04 and connected via tightvnc,uvnc and in remote desktop viewer from another ubuntu machine also. I am not able to access(connect) the server in GUI mode(when monitor is removed) but i putty is working fine in cmd line.
View 1 Replies View Related
