I can use Ubuntu with my onboard wireless in my IBM Lenovo Laptop but it doesn't work here and in other linux distro's I have tried I need to do a lot of code manipulation with the help of experts on the forums telling me what to do. I want to install Fedora 14 and maybe even try other Distro's as they come out without needing to be a Linux expert. So I want to go down to Best Buy a couple miles down the road and buy a USB WIFI Wireless thing.
I just recently purchased a Lenovo Thinkpad e520 and I'm wanting to put Ubuntu 11.04 on it. I downloaded the 64bit iso and burned it to a thumb-drive, just before booting the thumb-drive. I have not yet installed Ubuntu, but rather I'm still running it from a thumb-drive. I want to make sure everything will work fine, before installing it permanently.
However, it doesn't appear as if any drivers for my wireless card were loaded, as I can't view the available wireless networks. I successfully installed Ubuntu 11.04 on my desktop several months ago and I haven't booted into Windows since, -not one time. Therefore, I'm hoping to have my new laptop run Ubuntu as well.
I have a dual boot-up desktop system with Window XP and Fedora. Linux was installed after Windows came installed with the system. The system has only one hard drive and both the OS are on the same drive but on different paritions. Is it possible to copy the whole Fedora Linux parition to a new hard drive and then install the new hard drive on an entirely desktop to make it work like the old system? Will all the setting in Fedora remain the same? All the file and enviornment variables or the changes made will be retained on a new system? What to do? Which software to use?
How do I get applications intended for Windows to install on my Fedora 13 system? I assumed I could load Fedora and be able to install software that I purchased and ran in Windows...Is this true or am I going to be going back to Windows?
I'm trying to install Fedora 13 (Desktop Edition) on a new hard drive (the previous one working on Vista is dead now). I have downloaded Fedora and put it on a USB external drive for installing, but my computer doesn't seem to detect it (all I got is a blinking "_" on black screen).
My computer is a laptop Packard Bell "Easynote" SJ81 (with AMD Turion 64), and I have a Samsung Spinpoint SATA hard disk on it.
I just got my brand new shiny Dell XPS L502X laptop today and planned to do a dual-boot installation between Win 7 and F15. Win 7 went great but I can't even get the 64-bit Live DVD of F15 to load. The splash screen always hangs while the bar loads, but if I push ESC so I can see what's going on in the background, I get a whole lot of different error messages and the last message is "fixing recursive fault but reboot is needed." What I get is nearly identical to what I found in this post. I've already tried the usual kernel options that have always worked for me in the past, such as noapic, noacpi, and nomodeset. However, the Live DVD still won't boot. There's got to be a way to install this. Any ideas?
Ive installed Ubuntu recently but none of my attempts to get the wifi network working were successfull. It establishes connection but the indicator shows no signal and I cant connect to any website, I tried pinging external IPs etc. None of these worked. lspci -nn | grep 'Wireless Brand'Does not show anything. I could find 03:00:0 Network Controller: Intel Corporation Ultimate N WiFi Link 5300 lsmod | grep "wlan_module_name"Doesnt show anything. Restarting network says only: *Reconfiguring network interfaces... Kernel boot messages:
[Code]....
The network Im trying to connect to is hidden, so I have to input SSID manually, I doubt this causes the problem.
ok so the router works in windows and i know the config details of it.i can see other wifi access points in the area but not my one. i have tried joining it as a "hidden network" to no avail.is there any reason why fedora would not detect my own wifi when it detects substantially weaker signals instead??
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci 00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
the only error message I can find comes from "dmesg|tail"all it shows is "no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
I have an old PowerBook G4 that I would like to use as a 'dummy' computer for learning wireless penetration (WEP/WPA attacks) more effectively. I had been using a wireless router, but I gave it away I can use Mac OS X to share an ethernet connection over wifi, but this is _very_ un-configurable. You get two options only, WEP and a key-length. So, I would like to install someway to make this wireless connection more configurable.
Its been like this since fedora 12, in fedora 11 its no problem, i hope it will be fixed in fedora 13 and i am waiting..., and after fedora 13 released the problem is still the same...
I use Intel 3945ABG. wifi connect with no problem and after few seconds its disconnected, and re-asking my saved password (which is stupid since i save the password so fedora won't ask me that stupid question again).
i've got an IBM thinkpad 1858. fedora 11 & 12 (KDE spin) were always running without any major problems. today, i upgraded the system from f12 to f14 using preupgrade (and a wired internet connection). the upgrade process went smoothly.
but now i don't have a wifi connection anymore - there is no icon shown in the system tray and the led does not blink. the network configuration tool shows eth1 to be inactive and the button to activate it is grey.
lspci -v shows: Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) Subsystem: Intel Corporation IBM ThinkPad R50e Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at 90306000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 Kernel modules: ipw2200
My house is WiFi enabled. I am putting Live Fedora 14 to test, on my 2003 desktop pc, in the next 1 or 2 days. The first thing I would like to do with FEDORA is to hook it to my home WiFi. Where will I go on the screen, to do it?? by the time I boot I can do it with ease.
I have a pc which has 2 network cards, 1 wifi and 1 ethernet card.
I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
I have atheros wifi chip and I got wifi through madwifi. I was using f9 and my wifi connection in very stable. Then I tried F10. It has already firmware for atheros in it kernel. It get connect through wireless network (wifi) but soon it disconnect. I updated NetworkManager but no fruitful result came. Finally again I switched to f9 and I got very stable connection. But I am missing the features of f10. I hope that the connection will be stable in f11. I tried to install f11 but it says /dev/root not found again it shows that something clock time at the time of booting and it stop booting. So finally I choose to use f9.
I tried to connect to a WIFI require WEP key. I make the WEP key myself. I wrote it down on a piece of paper myself. My PSP can connect to the network, my XP can connect to the network. But same machine, my Fedora 11 can not connect to the network. As long as I tried to connect to the network, network manager just keep asking me for the WEP key. I put in the WEP key and tired out every option the network manage offer(WEP40/128bit, share key, etc),
Wifi getting disconnected very frequently in Fedora 10. I am facing issues in my Toshiba satellite laptop, after a fresh install of fedora - 10. After the install, The wi fi connection is dropping off very often, and even on keeping wpa_supplicant and wifiroamd in "active" state, the connectivity needs to be established manually.
I'm using wifi "usb card" from airlive with zd1211 driver in Fedora 12 OS. And I cannot access channel 12 and 13. Perhaps for US restrictions. But in EU are allowed. Any idea how to enable them?
iw phy told me the card has 14 channels width but last 3 are disabled.
I tried "iw reg set EU" but "iw reg get" still return me "Country:98"
Also set env. variable COUNTRY=SK and execute crda returns me: Failed to set regulatory domain: -22
in dmesg I can see the regulatory domain is first set to EU but when zd1211 is loaded it is set to US
is the following (btw I'm new to linux) - installed f14, connected to WiFi from my home router, started Firefox, and it was not able to open any pageslong with that I successfully updated my system and applications (and even installed new ones) through the same internet connection.Being connected to WiFi on my workplace I am able to browse with firefox, but at home - not...What could be the problem? What additional info should I give?PS. Sorry if the problem was already addressed, I am trying to find the solution on the web - but no success. Also 1-day discussions on ru-net forums were not successful, unfortunately.
I just installed Fedora 14 i386, and Fedora can see the wireless network just fine. I try to connect and nothing happens. It asks for the PSK constantly (yes, I promise I'm entering it correctly), even after I enter it correctly (I guarantee). I've searched around here a bit, but due to my limited knowledge in linux system I can't figure it out
1. Code: lsusb Bus 002 Device 002: ID 1737:0071 Linksys WUSB600N Dual-Band Wireless-N USB Network Adapter
2. Code: iwconfig lo no wireless extensions. [Code]....
I ran yum broadcom-wl and installed the driver for my card no problem. I connected to the internet just fine using my wifi thereafter.
When I shut my laptop down and booted sometime later, the wireless connection was gone and I didn't even see a wireless adapter in the networking applet.
I tried to run insmod wl and insmod wl.ko and that failed.
So... after using yum to install the broadcom drivers, how can I make that install 'permanent'; so I don't lose my wireless adapter each time I reboot?
What would be the commands I'd use to connect to aWireless access point, enter the password and delete the wireless name I am connected to through terminal.I do know that the command nm-tool lists all wifi connection ports even my IP address field, just want to take it a step further...
