Fedora Networking :: No Wifi After Upgrade To F14?
Dec 21, 2010
i've got an IBM thinkpad 1858. fedora 11 & 12 (KDE spin) were always running without any major problems. today, i upgraded the system from f12 to f14 using preupgrade (and a wired internet connection). the upgrade process went smoothly.
but now i don't have a wifi connection anymore - there is no icon shown in the system tray and the led does not blink. the network configuration tool shows eth1 to be inactive and the button to activate it is grey.
lspci -v shows:
Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
Subsystem: Intel Corporation IBM ThinkPad R50e
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at 90306000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
Kernel modules: ipw2200
View 5 Replies
ADVERTISEMENT
May 29, 2011
Wifi network operated perfectly with f13. Upgrading f13 to f14 did not show any problems except for networking. It seems that the wlan0-link is not ready. Consequently no network information about adresses can be obtained. Tried with network tools to activate wlan0. No reaction Tried to deactivate Networkmanager and bring network up with
service NetworkManager stop
ifconfig -a
Then
ifconfig wlan0 up
dhclient wlan0
No reaction on network. The NetworkManager icon disappears which is understandable.
View 14 Replies
View Related
May 6, 2010
I updated successfully to 10.04 via wireless, then I downloadsynthesizer via wireless. The next day, today that is, can't get wireless to work. It keeps prompting mor the passphrase, I enter everything correctly, all the other computers in the house have no problem.
View 9 Replies
View Related
Aug 22, 2010
I ran the upgrade from 9 to 10.04. So far I have everything but wifi. There is no wifi access even through a menu bar icon. Any others with this problem who've found a solution?
View 2 Replies
View Related
Sep 10, 2010
I have a good connection with 9.04 but when I upgrade it to 10.4 the network keeps looking for wiFI. I have a Linksys USB adapter 2.4HZ.
View 8 Replies
View Related
Oct 13, 2010
I'm facing a strange problem after upgrading my Ubuntu to 10.10. After I start up the system, the wifi is not getting connected by default (which was getting connected automatically in the earlier version). So I right click on network manager and click on 'Enable Wireless' option and it gets connected. So far so good. Now I close the laptop lid - it goes to sleep mode and after it wakes up, the wifi never gets connected. When I right click on the network manager icon, the 'Enable Wireless' option is disabled! I have to reboot my machine to get connected!
Here are the details:
Code:
Laptop : Lenovo U330
lshw -C network output:
*-network
description: Wireless interface
product: PRO/Wireless 5100 AGN [Shiloh] Network Connection
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 00
serial: 00:21:5d:0b:08:d6
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlagn driverversion=2.6.35-22-generic firmware=8.24.2.12 ip=192.168.1.3 latency=0 multicast=yes wireless=IEEE 802.11abg
resources: irq:46 memory:e4500000-e4501fff
View 9 Replies
View Related
Jan 12, 2011
I would like to re-raise this topic that I have seen on other discussion boards but seems to be going no where.I have been using Ubuntu for many years now having switched from other distributions. All my machines ran some version of Ubuntu, until just recently. I upgraded my personal HP TX2500 from 9.04 to 10.04. No problems. After 10.10 had been out for a while I upgraded again. The wireless would drop when busy/(signal slightly weakened) etc. It would not function again unless the wifi module was reloaded.
Then I installed 10.10 on my HP NC6400 the same thing occured. I installed Ubuntu 10.04 instead. It seemed no better. After some Googling, it seemed I was not alone. I tried all the suggestions I could find and none of them worked. One suggestion was to install Fedora 14. This works perfectly on the nc6400. The HP TX2500 has been reinstalled back with 10.04 where the wireless seems ok and I assume I am stuck there for a while.
Now my question is why would the networking behave this way for Ubuntu 10.10 (10.04 as well on the NC6400) but wireless on Fedora 14 is perfect (I mean really good! Better than either Ubuntu 10.04 or 10.10 on any of my laptops) on the NC6400. I am hoping that we can find a way to fix this, otherwise I will likely have to drop Ubuntu completely because I do not have an upgrade path for laptops. There must be many other users in the same position who are not discussing it and just rebooting each time this occurs. This must give a negative perception of otherwise great software.
Systems running Linux
Dell D610
HP TX2500
HP NC6400
IBM T20
[code]...
View 7 Replies
View Related
May 2, 2011
After being prompted by UpdateManager, I upgraded my Compaq Presario CQ71 from 10.10 to 11.04 yesterday. Most things seem fine, except that my wifi is disabled (it was working fine in 10.10).
Here are some details:
Code:
Code:
View 1 Replies
View Related
May 27, 2011
after upgrading to 11.04, I can't use the fn-f2 combination anymore to activate the wifi card. I'm using a Dell latitude laptop. Wifi is functioning normally when it's on and I can even turn it off with the hotkeys. When I try to turn it back on, the light goes on for a second and than dims again. I than have to reboot into Windows to get it back on, which is kind of annoying.
View 2 Replies
View Related
Jun 19, 2011
Our Acer 5820T handles Natty nicely in all respects except for the wifi not working. It was fine under 10.10. It uses the Atheros ath9k driver ... details:
Code:
rick@pond:~$ uname -a
Linux pond 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
[Code]...
View 9 Replies
View Related
Jan 1, 2011
since the upgrade i see all avaible wifi networks as they have 100% signal, both in NetworkManager and Wicd.in iwconfig and iwlist the signal levels change, but the link quality remains the same: 70/70 (see below). What could be worng? What can i do?
comp. model:
msi wind u100 netbook, ubuntu 10.10, kernel: 2.6.35-24-generic i686
lspci:
Code:
02:00.0 Network controller: RaLink RT2860
Subsystem: Micro-Star International Co., Ltd. Device 6890
Physical Slot: 0-1
Flags: bus master, fast devsel, latency 0, IRQ 17
[code]....
View 3 Replies
View Related
Apr 30, 2011
I have just upgrade to natty from maverick and my usb wifi dongle doesn't want to work. The usb wifi adapter i use is a Thonsom Speedtouch 121g. When using ubuntu 10.10 it work's fine after installing the package linux-firmware-nonfree, but after upgrading to natty it has stop working (the linux-firmware-nonfree package is installed [don't know if is the same version or an upgraded one]).
The network manager doesn't display available wifi nets. The output for lsusb is:
Bus 001 Device 004: ID 06b9:0121 Alcatel Telecom SpeedTouch 121g Wireless Dongle
View 9 Replies
View Related
May 9, 2011
I'm on a Dell Inspiron 6400 which had been running Ubuntu 10.10 (32 bit) perfectly.Today I upgraded it to Natty and the wifi now refuses to work. Details: While no Additional Drivers were needed on 10.10, upon installing Natty it prompted me to install "Broadcom STA proprietary wireless driver". Now when it's active I don't even have the option 'Enable Wireless' (only Enable Networking). If I disable STA the Enable Wireless option comes back, yet I can't actually search for wifi networks or connect to my saved one. The keyboard key to enable/disable wireless also does nothing.
I can take this laptop to somewhere with an ethernet connection for an afternoon if need be, but am currently stumped as to what to do. Obviously I know this machine can handle Wifi under Ubuntu - it's definitely a Natty problem.
View 6 Replies
View Related
Jun 18, 2011
i have a dell 1501 that has been upgraded from 10.10 to 11.04. everything was working okay. and then the user ran an upgrade recently. subsequently the wifi has mysteriously stopped working. it connects okay if one plugs it directly into the router but the wifi seems to have just stopped working.my mini 9 connects fine to the netgear wifi router using wireless.when i run the system tests for networking i get the errors..."root could not find def gateway info /proc""root could not find default gateway by running route"here is the output from some diagnostic commands.NOTE:this is similar to a post titled "wi-fi dead?" but the output is not quite the same...
lauren@lauren-Inspiron-1501:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]....
View 3 Replies
View Related
May 10, 2011
I have problem with my wifi hardware. After upgrading kernel from 2.6.35.13-88.fc14.i686 to 2.6.35.13-91.fc14.i686, my wifi is deactivated.
I'm using fedora 14 in my netbook HP Mini 210 (wifi broadcom).
View 5 Replies
View Related
Dec 4, 2010
i'd like to extend that ma intel wifi link 5100 is not detected no more after perform upgrade package( upgrade the kernel too ). when im using command 'lshw -C network' , there is appear to be detected, but not on command 'iwconfig' or even 'ifconfig' it just show nothin. also network-manager no longer show that ma wireless is work properly anymore.
the old kernel : 2.6.25-22 ( my wireless detected and usable )
the new kernel : 2.6.25-23 ( my wireless detected and unusable )
View 4 Replies
View Related
May 31, 2011
My Intel Corporation WiFi Link 1000 Series wireless card stopped working yesterday after I did an update via Update Manager.After the upgrade, wireless is disabled and the option to enable it in Network Manager is grayed out. I thought that it might be the new kernel, but changing back to the old kernel I still have the problem.
View 8 Replies
View Related
May 27, 2009
ok so the router works in windows and i know the config details of it.i can see other wifi access points in the area but not my one. i have tried joining it as a "hidden network" to no avail.is there any reason why fedora would not detect my own wifi when it detects substantially weaker signals instead??
View 2 Replies
View Related
Jul 3, 2010
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies
View Related
Apr 8, 2010
I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies
View Related
Aug 29, 2009
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
View 3 Replies
View Related
Mar 6, 2010
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
View 9 Replies
View Related
May 13, 2009
the only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
View 4 Replies
View Related
Sep 16, 2010
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies
View Related
May 12, 2011
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
View 5 Replies
View Related
Aug 23, 2009
I have an old PowerBook G4 that I would like to use as a 'dummy' computer for learning wireless penetration (WEP/WPA attacks) more effectively. I had been using a wireless router, but I gave it away I can use Mac OS X to share an ethernet connection over wifi, but this is _very_ un-configurable. You get two options only, WEP and a key-length. So, I would like to install someway to make this wireless connection more configurable.
View 2 Replies
View Related
May 29, 2010
Its been like this since fedora 12, in fedora 11 its no problem, i hope it will be fixed in fedora 13 and i am waiting..., and after fedora 13 released the problem is still the same...
I use Intel 3945ABG. wifi connect with no problem and after few seconds its disconnected, and re-asking my saved password (which is stupid since i save the password so fedora won't ask me that stupid question again).
View 1 Replies
View Related
Nov 18, 2010
I can use Ubuntu with my onboard wireless in my IBM Lenovo Laptop but it doesn't work here and in other linux distro's I have tried I need to do a lot of code manipulation with the help of experts on the forums telling me what to do. I want to install Fedora 14 and maybe even try other Distro's as they come out without needing to be a Linux expert. So I want to go down to Best Buy a couple miles down the road and buy a USB WIFI Wireless thing.
View 5 Replies
View Related
Nov 7, 2010
My house is WiFi enabled. I am putting Live Fedora 14 to test, on my 2003 desktop pc, in the next 1 or 2 days. The first thing I would like to do with FEDORA is to hook it to my home WiFi. Where will I go on the screen, to do it?? by the time I boot I can do it with ease.
View 1 Replies
View Related
Sep 1, 2011
I have a pc which has 2 network cards, 1 wifi and 1 ethernet card.
I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.
View 2 Replies
View Related
