just trying Fedora 15 and can't get the RT3062 driver to work, when i try Make command i get this:
Code:
make -C tools
make[1]: Entering directory `/home/raiden/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools'
gcc -g bin2h.c -o bin2h
make[1]: gcc: Command not found
make[1]: *** [all] Error 127
[Code]...
I'm trying to get a Rosewill RNX-N250PC wireless card w/ ralink rt3062 chip to work in a new build. I am able to see the card in Device Manager, but can't get the driver to work despite trying many of the suggestions I've read elsewhere. I installed build-essentials and downloaded the driver from ralink. I unzipped the folder, and started to follow README as well as this thread rt3062 [URL]. So, I've adjusted MODE and TARGET as instructed in Makefile. I also adjusted the following sections of red text from Makefile:
ifeq ($(PLATFORM),PC)
# Linux 2.6
LINUX_SRC = /lib/modules/$(2.6.35-22-generic)/build
# Linux 2.4 Change to your local setting
#LINUX_SRC = /usr/src/linux-2.4
LINUX_SRC_MODULE = /lib/modules/$(2.6.35-22-generic)/kernel/drivers/net/wireless/
CROSS_COMPILE =
endif
Then I set HAS_WPA_SUPPLICANT=y and HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y in /os/linux/config.mk in the driver folder.
Then I code: $ make (also tried sudo make with same result)
and get:
make -C tools
make[1]: Entering directory `/home/das/2010_07_16_RT3062_Linux_STA_v2.4.0.0/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/das/2010_07_16_RT3062_Linux_STA_v2.4.0.0/tools'
/home/das/2010_07_16_RT3062_Linux_STA_v2.4.0.0/tools/bin2h
cp -f os/linux/Makefile.6 /home/das/2010_07_16_RT3062_Linux_STA_v2.4.0.0/os/linux/Makefile
make -C /lib/modules//build SUBDIRS=/home/das/2010_07_16_RT3062_Linux_STA_v2.4.0.0/os/linux modules
make: *** /lib/modules//build: No such file or directory. Stop.
make: *** [LINUX] Error 2
das@desktop:~/2010_07_16_RT3062_Linux_STA_v2.4.0.0$
i don't have connection in my compuer write now so i whant to install RT2870 driver but i don't know how i found this tutorials [URL] but i can't install may be i have error in choise package this is my kernel version Linux Ouz3r4 2.6.35.10-74.fc14.i686 #1 SMP Thu Dec 23 16:17:40 UTC 2010 i686 i686 i386 GNU/Linux i found this driver too [URL] but how to install
View 1 Replies View Relatedother forums to get my Zonet ZEW1642D to work on my new install of Ubuntu Studio 10.10. None of the how-tos I've found APPEAR to have worked although I guess I'm not entirely sure how I would know. There is a pair of computers at the top right of my screen by the date/time. When I right click there the following are all checked:
Enable Networking
Enable Wireless
Enable Notifications
but when I click Connection Information Auto eth0 is the only connection that comes up (which must be the wired connection I'm using to submit this) Here are the things I've tried:
1) README_STA included in the driver files downloaded from the Ralink website although I must admit this was a bit over my head
2) http://ubuntuforums.org/showthread.php?t=1045703
3) http://www.hyperborea.org/journal/20...i-ralink-3062/
[Code]....
With any download that i start (whether ftp/http/bittorrent/etc..) I get download speeds of no more than about 100 KiB/s...which is decent, but I usually I know my internet speed is max at about 600 KiB/s. If I go to Network Mananger (while a download is in progress), and click on my wireless network, it will disconnect, then reconnect, and I'll get download speeds of up around 600 KiB/s for a period of about 20-30seconds...then, I'm back down to the 50 KiB/s - 100 KiB/s.
Fedora can download at max speed for a little bit, but then goes down to about 100KiB/s for the rest of time (until I disconnect and reconnect again). Why does this happen, and how can I get my speed to stay at maximum potential? Also, Fedora 10 recognized my wireless network card when i had installed F10. But I'm worried that the best driver wasn't used for it. I've found my actual driver that I used on windows vista/xp, and installed that via ndiswrapper, but i don't think that ndiswrapper disabled my old driver... am i right about this? Maybe a solution to my problem would be to disable the driver that came preinstalled on F10, so it can use my newly installed one instead?
I have a Netgear WG511GE PCMCIA card, and a driver from the original installation disk. I used an ndiswrapper-utils gui called ndisgtk to install the driver. I then do the following to verify an installation:
[Code]....
Unfortunately, when I put the PCMCIA card in, nothing happens. On Windows, a green light flashes even if the card is not connected to any network. At first I thought this might be a hardware issue, so I did #lspci and got:
[Code]....
Lo and behold, when I put a different unbranded Wireless PC Card in it works. I'm no expert in Networks, but to me this suggests a driver problem (i.e. the card is physically detected it just won't work). However, the correct driver was installed with ndisgtk and this was verified with #ndiswrapper -l, hence the confusion.
I'd be grateful if anyone else has had this problem/knows of this problem and is willing to share the solution with me/point me in the right direction. So far, Google has returned a few posts from a few years ago talking about patching kernels and manually building files etc (just before Prism54 became integrated into the Linux kernel).
I just got a new Sandy Bridge motherboard which comes with a single Intel 82579v network port adapter.
Does anyone know a way to make the Intel 82579v network port work with Linux on Fedora 14?
I tried finding an Intel Linux driver online for it but no luck so far.
I read something online about it may have the newer kernel drivers available for the Fedora kernel, but not familiar with how that works.
I have a problem with my laptop fedora 15 does not detect the wireless network target of Intel Centrino Advanced-N 6230 and Bluetooth 3.0.
View 2 Replies View Relateda Toshiba L650 laptop, and installed F13 x86-64 on a disk partition using install DVD. The wired ethernet on this is Atheros AR8152, and the Wireless is Broadcomm 4313. Both these devices are not supported by default. So, as per instructions on the Linux Wireless site, and some guidance on this forum, have downloaded the Broadcomm driver tar on another machine, copied it onto the Toshiba laptop using a USB device, and then extracted, and ran the b43-fwcutter. The subdirectory /lib/firmware/b43 is created and has approx 3 dozen files. However, the Broadcomm driver is not showing up as an option in the Network Manager (system-config-network) or in the lsmod command output. I tried to manually add it by doing modprobe b43 command - it then begins to appear in the lsmod, but the option to add the Broadcomm wireless driver during a "New wireless Hardware" is not appearing still. I think, at an abstract level, I need to somehow "tell" the system to add the Broadcomm driver - am just not sure how to do so. On the other hand, the Atheros AR8152 has no driver as of now, so the wired Ethernet is also not connecting. how I can download all the required files on a different machine, and then install it on the Toshiba laptop?
View 7 Replies View RelatedIm just after installing fedora 12 dual boot with windows 7. When I try to find my wireless network the laptop doesn't seem to picking it up. It works perfectly when I connect with a LAN cable.
View 2 Replies View RelatedI'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies View RelatedI've just installed CentOS in my PC - removed win 7. and i have a problem in driver installing these are the commands :
make
make install
I have been having trouble with the install of Ubunto in general. First problem is that my realtek network drivers rtl8168 are giving me some problems. I have followed advice from other threads for disactivating the NIC and disconnecting the power for 10seconds. This works in that Ubunto can recognize the hardware (hardware active), but it says it is not in use. Furthermore, I try to define the IP address manually and it does not allow me to press apply. Therefore I cannot connect to the internet.
I though I would try a fresh install of the latest Ubuntu. I did not have the internet connected (due to drivers). After the partitioning section (I partitioned over Ubunto 9.10), on the screen where it says select Username, computer name etc. some files were loaded, and at the end it says �ready when you are�but I was not able to move forward. I don�t now why. Ultimately I reboot the computer Now I get this message upon booting (I am still booting from USB)
GRUB Loading
error: unknown filesystem
grub rescue
This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
I have recently installed Ubuntu 10.04 beside my Windows XP on my laptop:
Dell XPS 1330
I`m now facing some problems with my new OS :
1. The driver for my wireless network card isn't recognized although I have installed the recommended driver which was in Ubuntu Hardware Driver section.
2. When I connect my laptop to my TV using HDMI port, the screen is OK but there is no sound!
3. When by any reason my network cable is unplugged, the whole network service goes down and I have to restart the system.
lspci results:
I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
Need to install b43 driver to use monitor mode on my card - versions are compatible, I ran
Code:
sudo apt-get install b43-fwcutter
As told, but instructions end there. Pressed yes to download and extract firmware. Do I need to activate this driver somehow?
Info on wireless card:
Code:
tnt@Artemis:~$ lspci -vnn | grep 14e4
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
Broadcom STA driver is activated in the hardware drivers manager.
I've been snooping around on the forums for a couple of hours now looking for a straightforward guide to installing custom wireless drivers. I have a new Airlink101 AWLH6075 wireless card (and no ethernet connectivity.) The Linux drivers are the RT2860 Ralink drivers in a .tar, which I have on a different computer.
So -- I'm on Server (command-line only), 64-bit, no working internet. Btw, the wifi card works fine on my alternate boot of Windows. wlan0 (wlan1?) is not detected during installation.
So, I know I need to:
1. mount the usb drive I'm storing the file(s) on
2. put those files in my local Linux directory
3. somehow install them
4. (disable my old ethernet connection?)
5. enable my new wlan0 and set up dhcp and the WEP login.
[Code]...
I would greatly appreciate any help I can get with any of these things. I don't even know how to mount a USB stick in command-line... but obviously the internet connectivity (and thus driver installation) is the major issue here and I can find out most of the other stuff on my own.
I have just installed Ubuntu on an old laptop for a little bit of programming and to gain some familiarity with linux. Im looking forward to getting to know my way around the OS
Unfortunately, the wireless card (for wifi) on this laptop is broken, so instead I have been using a wifi usb dongle on windows. I am having some trouble installing this dongle in ubuntu, i cant find a driver for it!
Its a "MicroNext MN-WD546J 54M Wireless Adapter"
[url]
I have my modem connected directly at the moment via LAN, and this works no problem, but id like to get it connected wirelessly
i follow this guide:https://help.ubuntu.com/community/Di...wto/Intel536EP
then i find my modem:
$ lspci | grep 536EP
Quote:
[code]....
I just recently recieved a Mini CQ10-525DX with a Broadcom 4313 wlan card. when loading ubuntu i notice it says that it supports 4311 4312, so i looked on the broadcom website and they have a newer update with 4313 coverage. I downloaded it but do not know how to install it.
View 9 Replies View Relatedi have windows vista with a broadcom 802.11g network adapter.I dont know much about computers but i would like to know how to install it on the ubunto OS so i can use internet ?
View 2 Replies View RelatedHow can I Install DLink wireless driver on Ubuntu ?
I had downloaded the driver . The file contains some files like MakeFile and ifcfg-wlan0 ,etc
+ a tar.gz file . which contains c or c++ source codes.
There are 4 folders also .
I am using an HP dv6 series laptop. The wireless works fine in Ubuntu 9.10 (must install the Broadcom STA wireless driver). When I try to use Kubuntu 9.10 my computer crashes when I try to install the driver. Is there any particular reason why it works in one and not the other?
View 6 Replies View RelatedI have Dell Wireless N-card 1520 on my Dell Studio 15 laptop. I have installed Ubuntu10.04 in it. My network card was not able to detect wireless connections. I have even installed 'Windows Wireless Driver' using ndiswrapper. I have latest driver for card. But when i click install .inf file , nothing happens or gets installed.
View 5 Replies View RelatedI have a desktop and I just installed ubuntu 10.04 as a dual boot with windows 7. My desktop has a wireless ZEW1642S card. I don't have access to a wired internet connection, but I can use the wireless on my windows 7 fine. It seems like there is no driver for it to work on ubuntu, and since I don't have an internet connection while in ubuntu, it seems I can't update it of course because I need internet to update. My wireless network does NOT have a password if that even means anything for this. I have the exe installer for the driver for it but I don't know how I'm supposed to get the INF file or whatever.
View 9 Replies View RelatedI just installed Ubuntu 11.04 on my Dell Mini 10v and for some reason I just realized that my wired network connection is not working for some reason. And not in windows either. But my wireless works in windows. So I have downloaded the latest Broadcom STA wireless drivers for linux and have tried to follow this tutorial to install it. But when I get to:
make -C /lib/modules/<2.6.xx.xx>/build M=`pwd` clean I can't get it to work. It says:
make: Entering directory '/usr/src/linux-header-2.6.38-8-generic'
scripts/Makefile.build:44: /usr/src/linux-header-2.6.38-8-generic/pwd/Makefile: No such file or directory
make[1]: *** No rule to make target '/usr/src/linux-header-2.6.38-8-generic
[Code]....
I've just changed from Fedora 8 to Fedora 10 and I'm having trouble installing a special alternative keyboard driver.
I used to be able to put the driver in the xkb/symbols directory, make entries for it in xkb/rules/base.xml and base.lst, and install with the System menu. Now I find that the Gnome tool no longer seems to be using the base files, and my driver doesn't show up.
Does anyone know where Gnome gets its list of drivers from? Alternatively, can I install it by editing a configuration file?
I have some trouble installing the nvidia driver on Fedora12. I started to follow the guide posted by Leigh here:[URL]..I enabled the rpmfusion repo, but when i wanted to install kmod-nvidia and xorg-x11-drv-nvidia-libs.i686 i had a depadency failure Here's what i got:
Code:
[root@Nuclear pinter]# rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
[Code]...
I have a linksys AE1000 wireless adapter, I have the proper driver, and I was able to install it on ubuntu to by typing cd (directory) make make install On Fedora 13 when i type su Cd (directory) make I get this after i hit enter after i type make
[root@Renegade wireless]# make
make -C tools
make[1]: Entering directory `/home/Renegade/wireless/tools'
gcc -g bin2h.c -o bin2h
[code].....