Fedora Networking :: Lost WPA Support After Updates

Mar 5, 2011

Running FC14 64 bit with KDE. I have an atheros wireless card that was working fine for months. Just recently I downloaded and installed some updates I got automatically. After a reboot, I have suddenly lost my wireless connection. I am still able to connect to unsecured networks but my network uses WPA and the status of the connection always freezes on "Awaiting Authentication". When connecting, it pops up the secrets windows asking for the wpa key even though its already entered. I've reset my home router several times to test various configurations with no encryption and with WPA. My key is correct but it will not connect. I've researched this issue and found others to have the same problem though their fixes have not worked for me.

I've gone through a few things. Wireless radio button on, networking and wireless enabled in fedora. Card still shown in lspci and with iwconfig. Funny enough, there was no wireless card listed in Network Manager. So I added the connection again and set it to be controlled by network manager and start on boot. No difference.

I'm wondering exactly what was updated that caused this. I didn't pay attention to what updates they were. This update occurred 3/5/2011. I've tried booting to the two previous backup kernels, but that doesnt help either. Also ran dmesg | grep wlan0 to find that the device was not active or ready but I could still connect to unsecured networks. So I'm stumped and would really rather not reinstall. Besides, when I get the updates again, it will probably do the same thing. Is this a bug? I would post more information but I am not with my box at the moment.

View 14 Replies


ADVERTISEMENT

Fedora Networking :: Lost Wireless After Updates

Jan 21, 2010

I just installed some more updates a little bit ago through automatic software updates and now i seem to have lost my wireless...I tried to see if i could reinstall kmod-wl but it said i had it still...Is this another thing that a lot of people are getting?

View 5 Replies View Related

Fedora Networking :: Lost Network Connection After Updates

Jan 30, 2011

I initially loaded Fedora 14 onto a Desktop and started to configure it to be a server but as soon as Iso software updates My network connection completely drops.

View 5 Replies View Related

Ubuntu Networking :: Wireless Support Disappeared After Updates

May 9, 2011

This is a Toshiba Satellite L640 and has a Broadcom BCM4313 controller and Bios version 1.9 and I'm posting by booting my Ubuntu 11.04 cd in "trial" mode which rules out hardware cause for trouble.My 11.04 install is brand new today and wireless was working perfectly immediately after install. Since then, I've shut it down and when I rebooted it I haven't been able to find any wireless connections.

I've installed the updates that were suggested after the install and also activated the two proprietary drivers that th system suggested - this might include the proprietary Broadcom wireless driver, that's the only proprietary driver suggested in the current "trial" mode and I remember there being the graphic driver and one other.I wondered if the wireless was turned off so I tried to turn it on or get it up. I typed ifup wlan0 but it said wlan0 was not configured. In production mode, when I click the wireless icon: it says wireless is enabled and offers me the option of connecting to a hidden network or setting up a new connection, but it can't see any connections even when my phone has seen the connection and automatically signed in. It can't see my home WPA2 connection or my completely open work connection.

View 1 Replies View Related

Ubuntu Networking :: Lost Bluetooth Support In 10.04 / Get That Back?

Sep 17, 2010

I upgraded my netbook (HP Mini 5101) from 9.10 to 10.04 yesterday. Everthing (including bluetooth) seemed to work, as it did before. Today I tried to install a 2.6.35 kernel from maverick backports (the kernel ppa), but it didn't work for me and I removed it again. Now my bluetooth is gone (bluetooth applet does not show any devices) but wireless still works.

I already tried to remove and reinstall the driver package via apt-get (sudo apt-get un/install bcmwl-kernel-source bcmwl-modaliases) but nothing helped. code...

View 2 Replies View Related

Ubuntu Networking :: Installed 10.04 And Lost Wireless Connection Right After Updates?

Jun 6, 2010

I installed a clean installation of ubuntu 10.04 inside Windows 7 and wireless worked normally in the beginning that I downloaded and installed all the updates "I selected without updating Grub".On the first reboot after updates, the wireless icon disappeared from the panel and could not connect to the internet although the settings in the Networking tools were correct.

View 1 Replies View Related

OpenSUSE :: Lost KDE Desktop Effects After Updates

Aug 27, 2011

I am Running opensuse 11.4 (64 bit) KDE desktop with all the updates & proprietary ATI driver installed. My processor is Athlon II X2 250 & motherboard is gigabyte MA785GPM-UD2H. I have 4 GB (2 +2) of DDR 2 RAM installed. I have turned off automatic updating & usually update my machine once a week. But just couple of days ago I had just updated my system and KDE desktop effects stopped working!!

I went to the Application launcher -> Configure Desktop -> Desktop Effects and everything was grayed out!! except for the following message Desktop effects are not available on this system due to the following technical issues:"

But, what technical Issue?? there was nothing else written! Googling for the issue has actually left me more confused; but I am still posting the content of my ~/.kde4/share/config/kwinrc file

[$Version]
update_info=kwin_focus2.upd:kwin_focus2,kwin_blacklist.upd:Blacklist-4.5,kwin_blacklist.upd:Blacklist-openSUSE-114,kwin_focus1.upd:kwin_focus1,kwin_on_off.upd:kwin_on_off,kwin.upd:kde3.0r1,kwin.upd:kde3.2Xinerama,kwin3_plugin.upd:kde3.2
[Compositing]
[Code]....

View 8 Replies View Related

Ubuntu Installation :: Lost Ssh During Aptitude Updates / How To Reattach

Mar 7, 2011

I lost my ssh connection to Ubuntu 10.10 server during the configuration update stage of an aptitude full-upgrade for a few month's worth of updates.From the following ps ax list, can anyone tell me how I might reconnect to the screen which is prompting whether to keep the existing samba version, or use the distribution conf version?

Failing that, what's the safest sequence top kill these processes and start again? This time I'll remember to use screen to prevent connection loss.

View 1 Replies View Related

Ubuntu :: Maverick: Messed With Updates - Lost Video

Mar 22, 2011

I was following the link below on my Acer trying to get my FN brightness adjust keys to actually work, instead of just showing the dialog. [url].... After following the steps and restarting, i can hear ubuntu start and the login screen appear, but i cannot see anything. Brightness keys do not work. So i hold my left shift to get the boot menu. Neither the primary boot or it's recovery method work (Kernel 2.6.35-28-generic). However if i choose 2.6.35-27-generic it boots right up like nothing is wrong. So how do i get my primary kernel working right again?

View 9 Replies View Related

General :: Internet Connection Lost After Ubuntu 10 Latest Updates

Feb 14, 2011

I installed ubuntu 10 just yesterday. Everything was working just fine. The auto-update function advised me to download and install the latest updates and so I did. It was over 300 MB. I installed it, did a reboot and my internet connection was lost. I tried a few things I found on this forum yesterday. Nothing worked. I can go on-line on the same computer using windows 7. But I always have to reboot to try the different solutions. All right that's fixed! But now I just have to fix Firefox...

View 1 Replies View Related

Slackware :: Radeon DRI Lost After Latest Updates From Current 64bit?

Feb 10, 2010

I installed latest 64bit updates from current and it broke direct rendering for my radeon 9550 card using X11 drivers.Xorg.0.log:

Code:
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.

[code]....

View 5 Replies View Related

Fedora Networking :: Does Support 802.11n

Dec 9, 2009

Are there any chipsets and Fedora drivers that support high speed wifi ( 802.11n)

View 2 Replies View Related

Fedora Networking :: DNS Lost After Every Reboot?

Mar 2, 2009

I have entered my primary and secondary DNS addresses through Network Configuration tool (system-config-network). But whenever I reboot the system it loses the DNS addresses. Following another thread, I tried changing the PEERDNS=no in ifcfg-wlan0; but it didn't work. I also put both DNS addresses in the ifcfg file, but that didn't work either.Does anyone know a solution to this?$ uname -aLinux fedoralinux 2.6.27.15-170.2.24.fc10.i686 #1 SMP Wed Feb 11 23:58:12 EST 2009 i686 i686 i386 GNU/Linux

View 11 Replies View Related

Networking :: PPP Updates In Fedora 12 Break NetworkManager

Mar 15, 2010

downgrading PPP, NetworkManger, and NetworkManager-gnome. This worked but is there an easy way to know when it is safe to apply the updates that are available?

View 2 Replies View Related

Fedora Networking :: Comcast Doesn't Support O/S?

Mar 8, 2009

In Firefox, I get the message "Your operating system is not supported by Comcast's installation Wizard.Please call 1-800-COMCASt to setup your account." After I look it up, there is not support at all from comcast Now I have a feeling all I have to do is enter a free dns server into my configuration.I'm using WIFI.. (because I'm not wired)

How do i enter the DNS server address?

4.2.2.2
4.2.2.1 ?

View 6 Replies View Related

Fedora Networking :: Modules Needed For Gre And Other Tunneling Support?

Sep 23, 2010

When I try to create a network tunnel, I get ioctl: no such device returned by the terminal. Which modules do I need to ad with insmod to enable tunneling?

View 2 Replies View Related

Fedora Networking :: Does Support Pppoe Over Usb Wireless Wifi

Nov 23, 2010

Does fedora13 support pppoe over usb wireless wifi?

View 8 Replies View Related

Fedora Networking :: Does Network Manager In F15 Support Bridging

Aug 24, 2011

does Network Manager in Fedora 15 support bridging and if so, can you configure the bridge using your wireless interface? All of the information I've come across so far said that you can NOT create a bridge using a wireless interface, and that Network Manager doesn't support bridging, but this info was also from Fedora 12 and below, so I don't know if it's still relevant for Fedora 15. I would certainly hope that by now you can make a bridge from a wireless interface. Even the lowly VMware Player offers this option.

View 2 Replies View Related

Fedora Networking :: Gnome 3 Network Proxy Support (15)?

Aug 31, 2011

My work uses a proxy server to mediate connections to the internet. However, changing the proxy settings in NetworkManager seems to have no effect. When I change the proxy settings in firefox from "use system proxy" to the actual proxy settings then it connects fine - but I would much rather be able to change the system proxy so that it works with all applications.

This is not confined to firefox - I have the same problem trying to use wget in gnome shell. However ftp works fine. I have just looked at the environment variables and it appears that NetworkManager is not setting the http_proxy variable (it is however setting ftp_proxy and https_proxy).

View 2 Replies View Related

Software :: Got A Fedora 9 Indication That Yum Updates Were Available But There Were No Updates

Feb 7, 2009

The little red popup window (packagekit) from the lower right showed yum updates

I did a yum update and no updates!

I tried again this morning and no updates

View 12 Replies View Related

Fedora Networking :: 10 DNS Information Gets Lost After Changing IP Address To Static

Feb 21, 2009

I am using Fedora 10 and when I first installed my machine, I had a DHCP assigned address to my network card. Later on I decided that I wanted to give my machine more of a server role, so I switched to static IP using the system-config-network utility. What happened after that was that I did change the IP address and routing information, but DNS information gets lost at every reboot, so I need to type it back again.

View 5 Replies View Related

Fedora Networking :: Lost Internet Connectivity After Installing New NM Packages

Mar 12, 2009

On one of my F10 boxes yesterday, I installed several NM packages with yum update after being advised of their availability. Today, (the first reboot since installation) I no longer have network access on that box.

View 2 Replies View Related

Fedora Networking :: Wireless Access - Connection Lost Within 3 Minutes

Apr 5, 2009

I have fedora 10 and am having problems with the wireless access. My computer uses the Realtek Semiconductor Corp. RTL8187B Wireless Adapter. It connects to the network, it gets an ip address and a broadcast address, but it loses connection within 3 min. I'm also new dealing with linux and fedora.

View 1 Replies View Related

Fedora Networking :: Ethernet - Suddenly Lost Internet Connection

Jun 16, 2011

I installed Fedora today, and I automatically had internet connection, I never had do configure anything myself. Then, I was playing around with VPN for a good while (trying to set up the VPN connection to my University), and now, I suddenly lost my connection to the internet!

But only Fedora can't connect anymore, the Windows PC has connection as well as my Mac OS X (I dualboot Linux on my MacBook). The Ethernet connection works as well, when I unplug the cable, Fedora gives me a message, but I just don't get into the internet!

Does anyone have an ides what I have to do? I don't know anything about network connections and I'm new to Linux...

I already restarted the Computer, but that didn't work, and Google didn't really held either.

View 3 Replies View Related

Networking :: 7.2 Home Network Gateway Support Fedora / Vista?

Jun 24, 2009

7.2 Home Network Gateway. Has anyone used this gateway and will it support both desktop and laptop I ask this question because I use my desktop at home and when traveling the laptop. The desktop has Fedora and the laptop has cut my tounge out vista.

View 5 Replies View Related

Fedora Networking :: Iptables Redirects And Prerouting Settings Lost After Reboot

Oct 31, 2009

Im new to fedora 11 and iptables, and i need to set the following set of instruction so VirtuaBox can accept request from lan, to the mailServer in the guest os, but after restart fedora i have to input it all again.How can it become permanent entry in iptables.

View 2 Replies View Related

Fedora Networking :: Updates Ruined System - Unable To Use Network Manager To Connect To The Net Through My USB Modem

Mar 12, 2009

I've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do

Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?

View 10 Replies View Related

Ubuntu Networking :: 9.10 Updates Yesterday/Today Cause Packet Loss On Networking

Apr 9, 2010

I have 3 Dell Precision M4400 machines. After getting updates yesterday or today, I get random network dropouts like crazy, on wired or wireless. On one machine I was able to turn off ipv6 in grub and reboot, and it works now. However on the other 2 machines, still have the same problems. All 3 are running 9.10 64 bit. Is there a way I can back out the updates so the network works again? Anyone else see this behavior after updates today?

View 2 Replies View Related

Fedora :: Software From Updates-testing Repo / Grabbed From Testing Repo When Run Regular Updates?

Jun 22, 2010

I am using Fedora 13 and I have one program (wine) that I need to start grabbing for the updates-testing repo instead of the default repositories in order to get newer versions. I think I can figure out how to add that repository, but I need to know if there are any others I need to disable or any other changes I need to make to my system so that I don't confuse my set up with conflicting updates.

Also, is there anything special I need to do to be sure that only that one program is grabbed from the testing repo when I run regular updates?

View 6 Replies View Related

CentOS 5 Networking :: Install The Latest Kmod-r8168 Rpm - It Failed To Enable The Networking Support

Dec 30, 2010

I had the elrepo kmod-r8168 driver running smooth for a while on my development box.
Yesterday, I did a clean install on it and when I tried to install the latest kmod-r8168 rpm, it failed to enable the networking support:

# yum --enablerepo=elrepo install kmod-r8168

The install performed all proper steps to disable the 8169 driver, I double checked to be sure.This is not a connectivity issue. If I remove the kmod-r8168 rpm, reboot the server and run the ifconfig eth0 up to activate the interface, everything works as expected. I use the latest kernel (2.6.18-194.26.1.el5 x86_64).

First, I performed a clean install, activated the eth0 and did a yum update, then installed the kmod-r8168 with yum. Then, I reinstalled the OS again, activated the eth0 and installed the kmod-r8168 on a 5.5 CD based kernel, same fail results. The only hiccup is: every time I start the box, I have to activate the eth0 interface (with default CentOS 8169 driver):

# ifconfig eth0 192.168.1.3
# ping -c 3 192.168.1.1 (no packets lost)
# ifconfig eth0 up

Once I do this, I have network connectivity.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved