The problem I'm facing is that I can't use my headphone. Sound works, but not the headphone. See my ealier thread. It was suggested to edit the module options, but I don't quite know which buttons to push.
View 6 RepliesI have an issue that is fixed by changing the lpfc driver to run using MSI interrupts. This is done by adding "options lpfc lpfc_use_msi=2" /etc/modprobe.conf.local file.
Is there a way to make this change using kernel boot parameters?
I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedI need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
Sound disappears as soon as I try to use an application e.g. News Video Fox, CNN, BBC or playing a video disk or cd disk, and a kernel module crash is reported (listed below from logs) After this happens no sound, and the desktop freezes (X11 only Linux is fine). Restarting X obviously do not solve the problem.
It seems that Fedora 12 has sever problems with Intel Sound cards.
I guess it is not really a Kernel developers problem but more the authors for the sound module causing the crash. I already reported it through the popup to "kernel-oops" by clicking on the "black screen" popup reporting the crash on FC12.
Here follows the logs containing the crash info.
WARNING: at sound/pci/hda/hda_intel.c:565 azx_send_cmd+0x36/0x1df [snd_hda_intel]() (Tainted: G W )
Hardware name: Macmini2,1
BUG?
[Code]....
getting KVM Kernel modules installed under Fedora 14? I'm trying to do a post-installation setup of KVM. I'm getting the "No package kmod-kvm available." error, when doing "yum install kmod-kvm".
View 1 Replies View RelatedMy VMWare Player was working fine After updating the kernel it is throwing the error "Unable to build kernel module" my kernel is 2.6.40-4.fc15.x86_64 what to do?
View 2 Replies View RelatedI had the 180.xxx nvidia drivers on my FC10 setup.I installed the 185.xxx and am running into issues. It gives me the fatal server error: no screens found message. Before that it says that the nvidia kernel module is 180.xxx and the driver component has 185.xxx. I can't seem to figure out how to uninstall the previous module to make this work. I removed the yum kmod nvidia. I'm running this using sh nvidia.185xxx.xxxx.run . The weird thing is that it sometimes would work but then I would restart and it would break again.
Thanks in advance,
im trying to install the driver for my nvidia GeForce 7300 GS.i have Fedora 12 installed in an Intel duo core 2 processor 64 bits.kernel installed is 2.6.31.5-127.fc12.x86_64...i followed leigh's guide i did the 4 steps but after reboot screen goes blanck and X dont work.the log says:
-> Kernel module load error: insmod inserting './usr/src/nv/nvidia.ko'
-1 no such device
I have downloaded latest version of sun vm virtual box foe Fedora 13 x64. After installing and creating a VM when I want to start vm I got this error. And when I enter this command on terminal :
/etc/init.d/vboxdrv setup
I get this error:
Code:
[root@localhost arash]# /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel module [ OK ]
Recompiling VirtualBox kernel module [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
Log file:
Code:
[root@localhost arash]# cat /var/log/vbox-install.log
Makefile:159: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
[root@localhost arash]#
since the release of the 2.6.32.14-127 kernel a couple of days ago I can't use my wireless adapter (rt2870 based) since there isn't a kmod-rt2870 package released for this kernel.Normaly I found that the kmod package was available the same day as the kernel. Does anyone know why there is such a delay this time? Or if there is a workaround
View 3 Replies View RelatedI want to do some modules development in fedora 11, by the command uname -r, I get the current kernel running in my system.
Code:
$ uname -r
2.6.30.10-105.2.23.fc11.i686.PAE
But when I run the following command
Code:
# yum install kernel-devel
the package what I installed is kernel-devel-2.6.30.10-105.2.23.fc11.i586 and kernel
development directory is /usr/src/kernels/2.6.30.10-105.2.23.fc11.i586
So,the modules I developed can't insert to current running kernel because current is i686 and the compile environment is i586. Is that a bug of fedora 11?
I am new to fedora core and needs desperate help.Now what i can notice is the kernel files doesnot match. will this makes a difference..what do you think ? How can i make the VirtualBox kernel module status [OK] ?
View 5 Replies View RelatedCode:
# dmesg | grep nvidia
nvidia: module license 'NVIDIA' taints kernel.
I searched around and found out the kernel accepts only GPL modules, which is pretty dumb. People recommended using rpmfusion's akmods, but that's what I'm using to begin with.
How can I fix this without having to recompile the kernel?
Code:
# uname -r
2.6.35.6-48.fc14.x86_64
I think I know quite well what my problem is. However, I'm still too much of a newbie to know how to solve it.My problem: I no longer get a login screen on my server after I ran a yum update which updated my kernel (thank god, vnc server still works).Cause: During startup Fedora complains that it can't load the module nvidia.ko. Reason: The module doesn't match the current kernel.
View 5 Replies View RelatedFor a diskfull node (the OS installed in a disk), I can use the 'insmod' command to insert a kernel module into the kernel. And after the reboot, the module is still in the kernel. I have a question here: how, when and which kernel module will be loaded in the boot up process for a diskfull node?And for the diskless node, can I use the chroot or some other ways to install the kernel modules into ramdisk, so that kernel module can work when the diskless node boot up? I think it needs certain mechanism to load the kernel like the boot up of diskfull node.
View 8 Replies View RelatedI have a fresh installation of Fedora14_x64 and after that I have updated the OS also.
Then I have installed VMware-Player-3.1.2-301548.x86_64.
All the installation procedure has completed successfully without any error.
But when I am going to run VMWare It is throwing some error.
I am attaching all the needed screenshot and log file also.
Using the rpmbuild to compile the kernel, every time the patches will be applied to the source code. So even if no changes are made to the source code and no patches are added to kernel.spec, the whole kernel will still be recompiled, wasting a lot of time
View 13 Replies View RelatedI generally check what updates are being installed. This time sadly I didn't and again this kernel had one missing module. VirtualBox-OSE stopped working. It had been working fine with other upgrades. No it's not a problem with dkms or other stuff. This kernel doesn't have vboxdrv module like other kernels...i verified it...
[Code]...
The 2.6.38.8 version doesn't have vboxdrv module!....hence again I have to roll back to older kernel. So before blindly upgrading....read this message!
I'm running Testing and need to pass some parameters to my bttv tv tunner card, for this reason I created the following file /etc/modprobe.d/kozumi.conf with this content:
alias char-major-81 videodev
alias char-major-81-0 bttv
options pll=1 radio=1 bttv_verbose=1 card=151 tuner=38 gbuffers=4
The problem is that for some reason this options aren't properly set after booting the computer, I've tried different combinations for line 1 and 2 without success.
I'm used to rmmod the bttv driver and modprobe manually with those settings but I'd like to automate the process.
Here is my problem:
I need to enable the statistic module in iptables.
I had Fedora 13 32 bits, iptables-1.4.7-2 and kernel 2.6.18
But kernel 2.6.18 does not support statistic module.
So, I upgraded from Fedora 13 to Fedora 14.
Now I have Fedora release 14 (Laughlin) and Kernel 2.6.18
I did this to upgrade: url
Also, I did this too.
# yum update kernel
No Packages marked for Update
How can I ugrade to newer kernel?
I installed openSUSE 11.2 on virtualbox. My host is windows 7. I tried to install the guest additions, but i get an error saying
Code:
Building VirtualBox Guest Additions Kernel Modules...Failed
(Your system does not seem to be set up to build kernel modules)
How should i go about to let my system build kernel modules?
I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
View 2 Replies View RelatedI'm running Virtualbox from the Sun website (need the USB support) and it breaks after each kernel update.The problem is that I installed a lot of Ubuntu systems for transitioning windows users with Windows in virtualbox to ease the migration but I have to rerun vboxdrv setup after each kernel patch.
View 2 Replies View RelatedWhat is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?
View 8 Replies View RelatedToday is two out of three boot messages fixed. Working on the third one now, and that relates to virtual machines. The whole Virtual machine thing is new to me. Never used it, but I'd like to start. Therefore, I am no longer willing to just ignore this. The error message during boot is this:
Quote: Starting VirtualBox kernel module [60G[[0;31mFAILED[0;39m] (modprobe vboxdrv failed. Please use 'dmesg' to find out why)
I updated kernel and everything seemed ok, except HD-PVR is locking up and recording only two minutes of every show it records. So, I have gone back to my previous kernel, but it seems that X isn't starting:
Code:
(II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[code]....
Fatal server error:no screens found I had done a yum install kmod-nvidia for the newer kernel. I am thinking I need to get the kmod for the current kernel again (2.6.32.12-115.fc12.x86_64 #1 SMP Fri Apr 30 19:46:25 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux), but am not sure how that is done?
my grub2 start-up has every kernel for ubuntu since 9.10 in the list. can i safely delete these older kernels without screwing something up? also, where do they live?
View 3 Replies View RelatedI have Kubuntu 10.10 and Back Track 4 (BT4) Linux installed on my system. I think BT4 is based on Ubuntu 8.10.
I have the following line for my kernel boot options in /etc/default/grub file.
Code:
I need the rootdelay option for the Kubuntu 10.10 kernel but the BT4 kernel does not need it. But looks like setting this has a global effect and it waits for 80 (seconds ?) even when starting the BT4 kernel which is not required.
So is there a way to give the rootdelay option only to the Kubuntu 10.10 kernel and not to the BT4 kernel.
Code:
How do I know what option means what to compile my own kernel? How to find support for different hardware in this mess (and exclude it)?