I have searched, and I have found that it's a problem of Kpackagekit. The solution would be to install Wicd, but according to the official page, Wicd don't support connection from usb modem, that it's what to occupy generally, but often I need connect to internet from wi-fi.Is there a option for connect so much to wi-fi as to usb modem
View 4 RepliesI just got a popup from KPackagekit saying:
Code:
Distribution upgrade available.
Fedora-12
Fedora 12 (Constantine)
Start upgrade now
Do I want to do this? Is it safe to do so? Can I roll back afterwards? Is there a better way to upgrade?
Does anyone know where to get documentation for KPackageKit? I've searched on KDEs web site and this forum without success. Also on Fedora.org and googling but nothing so far.I recently loaded this distro (F13) to try it out after using mostly openSUSE and some of the minimal distros. I'm finding there is quite a learning curve, even I started in linux with RedHat 5.1.
View 2 Replies View RelatedI love Fedora and have been using Redhat since v5. I am using Fedora13 x86_64 and when I use kpackagekit if I use the dropdown list of groups it says waiting for service, then returns with no entries. I have done a yum clean all; yum clean metadata; yum clean dbcache; yum makecache
View 1 Replies View RelatedWhenever I try to get KPackageKit to do anything, it says "Waiting for other tasks..." and just hangs. I can cancel (when there's a cancel button, but sometimes there's not) and yum runs just fine.Any advice on how to get this working? I hate hunting for the names of packages.
View 2 Replies View RelatedStarted testing F12 today, and ran into this. It takes about 30 s to start KPackagekit. Thats about 30 times slower than F11.
View 2 Replies View RelatedSince Livna went down, I've been having having problems with KPackagekit. I disabled the Libna repo by setting enabled=0 in /etc/yum.repos.d/livna.repo, and have been able to update with Yum.KPackageKit fails on me now with the message "Failed to initialize backend. This may occur if other packaging tools are used simultaneously."Then it fails to finish, which causes me to reboot before I can use Yum successfully.Under Settings, I see no indication that it knows where the repositories are, and no way to add repos.
View 1 Replies View RelatedI have a couple of problems - and am new to Fedora which, up until about three days ago, was flawless.Am using KDE on F13. (Gnome & LXDE are also installed.)First problem is easy to solve, I think. How do I prevent "inactive" windows from fading out? It's an incredibly inconvenient feature and utterly defeats the whole purpose of the "Always on Top" option! I can't seem to find the option anywhere?On to KPackageKit. It has been trying to update KDE for the last three days but always gets hung up with the message: "Waiting for Service to Start."I notice that this problem might be listed as a Bug? - but not entirely sure.Is there a straightforward solution to this or is it, in fact, a bug?It also wants me to repeatedly restart because a new Kernel 2.6.33.5-124.fc13 has supposedly been installed.
View 7 Replies View RelatedI have error in KPackageKit when i try to install anything or check for updates:
Failed to initialize packaging backend. This may occur if other packaging tools are being used simultaneously.
Details: There are unfinished transactions remaining. Please run yum-complete-transaction as root.
I don't know anything about other packaging tools - I think I don't using any. Yum works fine in terminal. Reinstall PackageKit and KPackageKit files doesn't helped me. I also try to rebuilt rpm db:
rm -f /var/lib/rpm/__db*
rpm -vv --rebuilddb
yum clean all
I'm using Fedora 12 x86_64.
Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies View Relatedkpackagekit keeps waiting forever "Waiting for service to start".what is this service that it is waiting for? i am running fedora 12
View 1 Replies View Relatedi am a new fedora 12 user (kde spin, 64bit)but received not-so-nice welcome from kpackagekit. i cannot install anything it always complains that "waiting for other tasks". how do i solve this?yum also does not work telling that
Code:
Loaded plugins: presto, refresh-packagekit
Existing lock /var/run/yum.pid: another copy is running as pid 1880.
[code]....
Trying to install Frostwire as well as RPMFusion on Fedora 12 KDE.I simply just got an error from KPackageKit "An error occured." No additional details.I then tried to do the same with RPMFusion, where I also got the same error.I figured I'd ask here before I go any further. I know with Kubuntu I had some issues with particular packages with KPackageKit so I'd use GDebi for those. Should I do that here, or what's the proper protocol to get things like RPMFusion and Frostwire fired up?
View 3 Replies View RelatedI have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
Under Applications|System Tools I find something called KPackageKit, but I can't find much info about this. What is it? Can I safely remove it?
View 2 Replies View RelatedI just upgrade my Fedora 14 to Fedora 15 RC1.I found the critical issue for me that Juniper Network connect(SSL VPN) didn't work for me again.I wonder if the network interface name changed impact this, but I am not sure about it as I didn't see any obviously error.I can connect the VPN auth page with my username and password after I switch my Java plugin to Sun JRE( I use google Chrome).As the Java VPN applet started, it appeared for a while and shutdown again. I think the VPN auth has been passed at that time, the problem might about creating the VPN Tunnel.
View 8 Replies View RelatedMy KPackageKit is not downloading any update, it shows updates, I click apply, I authenticate, then it asks me to accept an agreement, after which it returns to an empty KPackageKit (as if there were no updates). If I open it again, there are the possible updates again (naturally, since it didn't download anything).
View 5 Replies View RelatedI mean that - when I'm choosing any soft to install or remove, the authentication was fail. Despite this, by using "apt-get" command software installs normally.
Before some time I am by my mistake was removed any groups from my linux-account. Now, my account stay in these groups:
Code:
andrew@xoompc:~$ groups andrew
andrew : andrew sudo virtualbox
Maybe I need to enter some group for installing software with KPackageKit ?
I recently installed Suse 11.4 (running KDE) and my first experiences with the new updater are not great. It seems to stall, require a lot of intervention, fail, and generally not behave nicely. I would much prefer to use zypper manually as I used to but can't find anywhere to disable this applet or process in KDE. Is there any way of disabling this so that the process and systray icon never start?
View 9 Replies View RelatedThe problem: when kpackagekit would prompt me to update packages, it would ask for my password. I would enter it, and the dialog would reject it with the message "incorrect password, please try again". Over and over. The password WAS correct -- it worked in Synaptic and on the command line using sudo, and obviously it also worked for logging in.
I suddenly had a hunch that kpackagekit might not be the culprit, and that authentication was being done by a different program -- and lo and behold, the dialog actually said policykit up there...
So, searching for policykit problems out there, I ended up seeing someone reinstalling theirs for their problem (which happened to be different from mine). The code to do that, in the command line:
Code:
sudo apt-get install --reinstall policykit
After that, entering the password after kpackagekit prompts me to has worked fine and the updates happen as nature intended.
I finally gave in and took the plunge - I upgraded from kubuntu 9.10 to 10.04. I knew better but I did it anyway. I got a few fglrx-related error messages during upgrade, but it was too late to do anything. Here's the problem - I can't update or download any software using either Kpackagekit or apt-get. If I try I get an error message about unmet dependencies.
[code]....
I have installed Kubuntu Lucid x86 10.4 LTS for the first time. Has anyone got a link that explains how KPackageKit gets the IP address of the repositories? I can install packages using sudo apt-get install xxx OK . KpackageKit tells me I have updates from the repositories. I can select them all and apply , but I get an error that it can't find the repository under a 192.168.100.129:8080 address . Which is not a surprise . I am using mirror.optus.net as a repository and can ping it fine on the command line. So is there somewhere else that KPackageKit maps IP addreses ? I have tried another mirror mirror.aarnet.edu.au and got similar results. My local sub-net is not 192.168.100 and have tried setting fixed IP on the local sub-net and different DHCP addresses and still the same error.
View 5 Replies View RelatedI am using Reliance Netconnect Broadband+ (HUAWEI EC 1260) on my Fedora 10 and Fedora 12.
View 1 Replies View RelatedI just installed Fedora 12. My wireless card in the laptop works, and can "see" available networks. At system startup it pops a window for me to enter a security key, but I can only choose:
None
WEP 40/128
WEP 128 Passphrase
LEAP
Dynamic WEP
My router is set up to use WPA-Personal with AES, and works just fine with various Windows and Mac computers.
I ran yum install NetworkManager and same for wpa-supplicant. Both were updated to most recent version, but I still cannot enter a WPA security key.
i got little frustrated with vsftps. the transfer rate is very low. im using fedora 12 and use ad-hoc to connect beetwen my two box..
View 6 Replies View RelatedI able to connect to Internet with WAP encyrption. But after I restart my laptop, it cannot connect again.I also cannot connect to wireless with WEP encryption.I cant even connect to open wireless without password. It is very weird that I able to connect awhile with WAP but others cant.Anyone counter this problem? What is the problem? driver?But I able to detect wireless. And can connect with LAN cable.
View 2 Replies View RelatedThe package manager runs when a user clicks on a .rpm file automatically. I tried clicking on it from a normal user dolphin window and it opened up but since it can't install to a /something directory, I had to run it as su. So I try to open dolphin as su and then click on my file. I see the package editor starting up (bouncy icon and a space in the panel) but it never actually pops up a window. Now when I click on the file from either user this is happening. What's going on? Is this a bug?
**update, it popped up from normal user after like 10x attempts and it said that the repository already exists and this is an unexpected error. what does that mean? what errors are "expected"?
10.04 - Installing splashy fails and consequently makes kpackagekit completely unuseable. Attempting to fix this with aptitude or 'sudo dpkg --force-overwrite --install' or 'sudo apt-get -f install' (as suggested elsewhere) brings me no joy either. Is there a fix so I can remove splashy and repair kpackagekit? How do I kill splashy so i can repair kpackagekit?
View 5 Replies View RelatedI tryed to config the tcp/ip settings.
I tryed with the following values:
IP: 192.168.48.120
subnetmask: 255.255.255.0
gateway: 192.168.48.2
With the above settings i was able to connect to net same thing i tryed for fedora
But i was not able to connect, it will always shows the subnet mask as 192.168.48.2 ie the gatway value insted of 255.255.255.o
i'm new on board and new for linux.i installed fc 9, and it's look ok. i want to use stutic ip,so i did what i find here:uote:First, NetworkManager and static ip addresses do not get along. If you want to use static ip addresses, turn off the NM services by going to "system->administration->services" and disable the NM services and reboot.Next, goto "system->admin->network", highlight your device and click the "edit" tab and configure the device. Uncheck the "controlled by NM option" and "automatically obtain ip address" BUT then place a check in the "allow users to control" and "activate on boot"Then click the "dns" tab and fill in your dns servers ip addresses.the problem is that is no internet connection after reboot. than i go to system->admin->network,and activate the device and all ok.
View 10 Replies View Related