Fedora Networking :: Compaq EVO610c Wireless Invisible
Sep 3, 2010
I've just loaded Fedora 13 - my 1st Linus system - on my laptop. It went smooth and connected to the net via 'eth0'. But my wireless - an EVO610c Multiport W200 lan card - is invisible to Fedora. A couple of data points are:
[root@EVO ~]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:02:A53:BE:ED
inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::202:a5ff:fec3:beed/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9758 errors:0 dropped:0 overruns:0 frame:0
TX packets:6758 errors:0 dropped:0 overruns:0 carrier:0
[Code]....
I have the NetworkManager applet 0.8.1 (2 pc screens) but don't see the "Network' icon under System->Administration I've read that should exist. I have placed the latest 'Windows' networking file from HP (sp2956.exe) into my download directory. What must I do to 'discover' my wireless card? I suspect the use of "ndiswrapper" and have imported it into Fedora. All updates have been done via 'yum'.
View 4 Replies
ADVERTISEMENT
Aug 3, 2010
I'm new to Fedora, I used to have Ubuntu 10 and found that some software I required would not work properly so I decided to Fedora under recommendation from a friend. I really like it but when I installed Fedora 13 on my Netbook I found it difficult to set up my wireless connection.
View 6 Replies
View Related
Mar 17, 2010
I installed Fedora 12 on my Compaq Presario c700 Notebook recently and had a great install. I installed ndiswrapper and installed the inf file for my broadcom 4311 driver through ndiswrapper as well. The installation of the driver appeared to go smoothly.
The only thing is that I still cannot connect to the internet. I aliased the driver as well to wlan0. I can not figure out what is currently the problem. I tried reinstalling the driver and I keep receive a message stating the driver is already installed.
View 7 Replies
View Related
Aug 14, 2010
I go up to the panel and click on the wifi manager, create a new network and name it "loganspc" with no authentication since previously created networks didnt work with those settings. Now before, I used this in conjunction with my eth0 connection so i could give my ipod internet. then i got a wireless router to do that. its exhibiting the exact same problem. Both the router and my laptop's network are invisible. I create it and then i cant connect to it with my ipod. I do a wifi scan (with an app, its jailbroken) and it doesnt find it still. nor does it find the routers network.
[Code]...
View 1 Replies
View Related
Dec 26, 2010
I want to make my computer invisible or hidden to the other computers connected to the same wireless network. In other words, I want to turn off network visibility or network mapping. I think this amounts to the ability to turn on and off the Windows Link-Layer Topology Discovery (LLTD) Responder. [URL]... On windows, I believe this would be comparable to setting the wireless network as Public instead of Home. I like to share files using Ubuntu when I am connected to my Home router, but I don't want to be discoverable or visible to clients on a public wifi network.
I have already created a shared folder on my desktop which installed some sort of networking components to interact with Windows, but I don't want the public wifi network to see this folder, or my computer name at all. I want to be invisible to other clients on the same network. Right now I am visible and can see other clients connected to this public wifi router.
(In case some ask: I do not want to disable SSID broadcasting on the router as it is a public wifi router that I do not have access to.) Can anyone explain how to do this (preferably with a GUI method so I can reverse the steps when I connect to my Home network)?
View 5 Replies
View Related
May 2, 2011
I just got a new Compaq CQ56 and installed 11.04 32 bit on it. Everything is great except the wireless is not working. I can't even get it to detect the wireless card.
iwconfig:
no wireless extensions
[URL]
Here is the link to the Compaq website. It doesn't say what brand the wireless card is.
View 9 Replies
View Related
Feb 11, 2010
I'm totally new to Ubuntu and have just set my laptop up to dual boot. It is an HP Compaq 6720s. I am running crunchbang just now. And am running Ubuntu from the live CD to look at things and familiarise myself.
My laptop has the Broadcom wireless card inbuilt. BUT.. I cannot get Crunchbang or the Ubuntu (8.10) to see the wireless. Is there some little thing I am missing or something that I should set up that I don't know about?
View 1 Replies
View Related
Dec 11, 2010
Installed 10.10 maverick on my compaq mini 110, activated the restricted STA driver... But under the networking drop down it shows wireless as enabled but I cannot actually see any networks, there should be about a half a dozen to see. Works fine under windows. Before the restricted drivers are activated ifconfig shows eth0 and after eth0 and eth1 but when I do iwscan eth0 or eth1 it tells me this action is not supported! I have tried reinstalling from cli but no difference?
View 3 Replies
View Related
May 2, 2011
I did a clean install of Ubuntu 11.04 from a cd over windows and Ubuntu 10.04. The hardwire internet works but not the wireless.
compaq presario m2010us Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
View 1 Replies
View Related
Jun 8, 2011
when I had windows vista on this computer and my wifi went down for good. Well recently my girlfriend was having problems with her wireless and I put ubuntu on it yesterday and then it worked well that made me wonder so I installed ubuntu over my operating system on this computer.
I have not much experience in linux but I have tried most things I have read and when i went to the hardware drivers in the system's drop down a wireless driver doesn't show up I have no driver on here and of course after i wiped the drive and put this system on it i found the Compaq wireless drivers install (not sure if its real or not). I can get on line fine with an ethernet but that is inconvenient to me with the nearest hook up being a bridged network on my brother's computer or the home router which is 30 ft away.
View 8 Replies
View Related
Jan 17, 2010
I just installed a fresh Ubuntu over a Vista install on a Compaq 6720s with Wubi.But the wireless doesn't work in Ubuntu. In Vista everything is still fine.I tried two tips from the help program in Ubuntu, but to no avail. I also tried reseting and restarting. Tried the manual swith on the laptop.
View 2 Replies
View Related
Aug 17, 2010
I cannot get wireless to work on my friends HP Compaq 6735s Laptop with Linux Mint 9. The wireless button is lit up. I can use my Desktop USB wireless adapter alright.
View 6 Replies
View Related
Jan 19, 2009
I have been trying searching and reading for a few days now and I have had no luck getting a Encore ENLWI-G2 wireless pci adapter to install. I downloaded their Linux driver [URL]...and I keep getting errors on the makedrv (attached). I get a couple "make: *** /lib/modules/2.6.18-92.el5/build: No such file or directory. Stop. " errors but the modules appear to be there.
I have not touched Linux in 5 or 6 years, so pretty rusty. I have a call in at Encore support and will post their solution if they get to me first.
View 19 Replies
View Related
Jan 3, 2010
I have a Compaq n610c laptop equipped with a w200 wireless card on the lid of the laptop. Works fine on XP. I recently formatted the HDD and installed Ubuntu 9.10. Wired network works fine and I've updated to the latest updates etc...However wireless won't work. I've followed the instructions onhttps://help.ubuntu.com/community/Wi...ice/CompaqW200. Everything was going fine until I have to compile. I tried the make command and get the following.
Errors:
make -C /usr/src/linux-headers-2.6.31-16-generic M=/home/gsoo/usb KERNELRELEASE=2.6.31-16-generic modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-16-generic'
[code]....
View 3 Replies
View Related
May 29, 2010
On friday (5-28-10) I installed ubuntu 10.04 Lucid, and everything was just peachy, wireless worked and everything.Today (saturday 5-29-10) booted up to find that my wireless wouldn't work. I plugged up to Ethernet and that worked fine, i updated and everything, still no wireless. I google the problem, and have tried everything under the sun to get this darn wireless card to work. I'm pretty sure it's atheros but i am not sure. when i go to system -> admin -> hardware and drivers nothing shows up
View 2 Replies
View Related
Jun 13, 2010
I just installer Ubuntu 10.04 Netbook Remix on my Compaq Mini 700EL, the ubuntu website says that everything works very well including the wireless. But for some reason the list of connection doesn't appear at all. It just says "device not ready" This is driving me a little nuts. It appears that the Broadcom drivers are installed. I typed lspci on the terminal and it says that the computer loads a Broadcom Corporation BCM4312 802.11b/g (rev 01)
I also downloaded the drivers even though they should be already in it. But I'm not sure.
View 1 Replies
View Related
May 13, 2010
I have a Compaq Presario CQ60 laptop and have one of those wireless light indicators. For me the light glows orange when the wireless is OFF and blue when the wireless is ON. In Ubuntu 9.10 (Karmic) the light was always orange, even if the Wireless was on, but my wireless worked right out of the box so I was grateful for that, but since upgrading to Ubuntu 10.04 (Lucid) I've noticed that my wireless light alternates between orange and blue frequently and sometimes flashes madly when wireless activity is occurring.
I was wondering if there is a fix for this as it can get quite annoying, the light sometimes stays blue for a while but will ultimately keep going back to orange and vice-versa, my friend who also has a Compaq Presario CQ61 (Revised model of mine) has his wireless light constantly blinking orange and blue no matter what.The wireless itself works fine, I can connect to any wireless connection and use it without having to install anything else, so it does work out of the box, which again, I'm grateful for.The wireless adapter is a Atheros AR5001 Wireless network adapter. Do I need to install additional packages or drivers to get the wireless adapter to work properly?
View 9 Replies
View Related
Feb 12, 2011
I have an Atheros AR5007 802.11 b/g WiFi Adapter. I use OpenSuse 11.3, KDE desktop.When I did iwconfig, it displayed the following:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"sami"
[code]....
View 6 Replies
View Related
Nov 8, 2010
Sorry for repeating the same old complaint but there doesn't seem to be a common fix: Wireless does not work on my Presario R3000 although SUSE 11.x lists the hardware in the Hardware Information list and the hardware is turned on. Network Manager doesn't display any wireless networks in SUSE while Win 7 can see 4 of them on the same machine. Ubuntu has no problem either
View 1 Replies
View Related
Feb 17, 2011
I am running openSUSE 11.3 updated with all the latest patches and I cannot connect to my wireless router. I am running Linux Mint 10 on the same type of notebook HP Compaq 6910p and it worked right after the install. If I take off the security WPA & WPA2 Personal I can connect. lspci -v | less shows this for my wireless card.
10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Subsystem: Intel Corporation Device 1000
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at e4000000 (64-bit, non-prefetchable) [size=8K]
[code]....
I am using the same settings for both notebooks just can't figure out why openSUSE 11.3 won't connect. I get the prompt to key in my password, I've even checked the box to show password to make sure I was keying it in correctly. Everything was good but it just goes right back to the password prompt after it fails trying to connect.
View 3 Replies
View Related
Apr 29, 2011
I just finished putting openSUSE 11.4 on my Compaq Presario V5000. I have been trying for hours to find the answer of how to get my wireless card to work. I can't connect to my router wirelessly and the on/off button for the wireless mode does not light up when pressed.
As far as I can tell from what I have already tried, I have a broadcoamm wireless card. It is a bm4318. I have b43-fwcutter installed and I have tried updating my firmware through the terminal. I have also used 'sudo /usr/sbin/install_bcm43xx_firmware'. It appeared successful, but the laptop still cannot make a wireless connection.
View 6 Replies
View Related
Dec 16, 2008
In my compaq pressario lap, i am using fedora7, but i am not able to acess wifi.
View 1 Replies
View Related
Mar 20, 2009
How to make run modem on laptop Compaq Presario C700? Modem is HDAUDIO Soft Data Fax with SmartCP com3.
View 4 Replies
View Related
Sep 19, 2010
new Compaq 510 laptop in which we installed Ubuntu 10.04. When Wireless is switched on it shows the available networks but won't connect. It connected on a few occasions but still we can't browse. The proxy settings are correct.Will installing wireless drivers help? If so, where can we find them?
View 1 Replies
View Related
Jul 22, 2011
I just installed ubuntu 11.04 to compaq presario v2000.Everything works except wireless.
View 8 Replies
View Related
Sep 15, 2010
Have been working on a compaq 610 (64-bit) wireless drivers. I have installed all drivers available for wireless devices from its repo but still, the wireless device isn't working. it does fine in windoz.
View 13 Replies
View Related
Jul 28, 2010
i'm very new to linux(starting), don't know anything. I tried my level best to configure my wifi adapter but, couldn't do it. so give to step wise instructions to to do so.
View 8 Replies
View Related
May 19, 2009
I've installed CENTOS 5.3 on my laptop, on dual boot with windows xp. The problem is that my wireless network manager doesn't find any networks. Another laptop with fedora 10 installed finds the network, so the problem is not the network. I guess it's a problem with the wireless driver / firmware, as i had this problem on fedora some time ago, and i've solved installing the firmware. Now i've installed the firmware, i rebooted, and it still doesn't find any network.
View 1 Replies
View Related
Jun 17, 2010
I've decided to try Linux again after a 5 year gap - in around 2005 I installed Suse (I think and I'm not sure of the version) to an Hp laptop and, back then I got hugely frustrated that I had no sound, couldn't for the life of me figure out how to install the driver and gave up after around a week. new company, new laptop, thought I'd try again in 2010 - I'm trying to use the laptop as a work machine mainly, but for dj-ing in an emergency, so I need a 2nd Os and Linux fit the bill. I've got 10 years of It experience, though these days am a Project Manager by day. I've technical enough, but don't have much time.
Naturally I assumed that, by now, everything would be nice and smooth. And, at first, it was - I chose Debian Studio edition (low latency) found a usb linux creator (this is a netbook so no cd drive), Linuxlive usb creator, made up a usb key of Debian 10.04 (desktop edition, as I was informed this was the standard and that I could upgrade to studio after), partitioned my drive, installed and.... Black screen, flashing cursor.
Ok - found some instructions that told me how to work round that...did...but then couldn't get wireless (I've only got wireless internet). ended up, after a day of fiddling with 'blacklisting' drivers, deciding their must be something wrong with my install, so started again with the 'netbook' edition of debian 10.04. This time it boots. Still no wireless.
Now I find people saying things like "blacklist this driver" (b43 and b44) and "connect to the internet and install this driver". Only one problem - only wireless internet - if I go to install more drivers it tells me there aren't any. So I think "I'll install a driver from usb". Naively assuming that by now it'll be a self contained installable package like windows and osx. I find that I need an 'STA' driver (and frankly by now I've spent a long time on forums - this was meant to be easy). Ok - I find the 802.11 Linux STA driver on the broadcom site (can't post links here yet). ownload the 32 bit version, stick it on a key...read the readme and.... Frankly, I'm one step away from trying to roll this all back. I cannot believe I need to be in a 'terminal' typing;
# lsmod | grep "b43|ssb|wl"
# rmmod b43
# rmmod ssb
# rmmod wl
and so on.
either way, I plough on and get to # insmod wl.ko but it says it can't find it. how to install this driver? Is it even the right one? PS I'm staggered Linux is still so non techie friendly.
View 13 Replies
View Related
Jul 14, 2010
where i can download driver for my laptop. i just install ubuntu in my laptop and i dont hve how to make my laptop connect to the wireless internet. and i also using ATI radeon graphic card.
View 2 Replies
View Related
