Fedora Networking :: Wireless At Run Level 3 Using Public Wifi With Lynx?
Aug 5, 2009
I have been trying to test the use of X window forwarding over SSH in a cafe. The Cafe's WiFi requires login via a web browser. Using Fedora 11 with Gnome on a Dell Latitude D600 laptop, the wireless works just fine. I am able to use a virtual terminal to ssh to my server at home. NX client/server works also. However, when I change to Run Level 3 on the Laptop in order to use X Window forwarding, wireless networking fails to function. Will wireless networking function at Run Level 3, and if so, how is that accomplished? Also, if I get Wireless to work at Run Level 3, will I be able to login to the free public wifi using Lynx or some other text browser, as I can with IE and Firefox?
View 7 Replies
ADVERTISEMENT
May 13, 2009
the only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
View 4 Replies
View Related
Nov 25, 2009
As waht it says above. I can't access public wifi as any browser on every single distro i've tried (15+) won't load just stuck in perpetual loading. No error message or nothing.
Also the browser wouldn't work until i disabled ipv6 in about:config. All browsers do this. is there something i could do to disable it completely so i have a browser choice?
View 5 Replies
View Related
Mar 24, 2010
I've got a level one usb wifi model wua-0603. However, ubuntu 9.10 could not recongize it automatically. How can I install the driver for it ?
View 1 Replies
View Related
May 18, 2010
A lot of people have the problem to find themselves with Lucid Lynx 10.04 and experience massive issues when connecting to wireless - me too. As a service, here some relevant links which promise relief:
[code]...
I tried all of them, and none reliably worked. Every solution which required re-association wtih the AP helped for some time, but nothing helped for long. First, don't let yourself fool by the disable IPv6 trap - while it is "enabled" it is acutally not used by Lucid! I have a clean install of Kubuntu 10.04 on an AMD64 Laptop with Broadcom STA driver: 03:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03) However I can reliably stabilize my connection for some time either by manually disabling WiFi with the hardware switch or disabling WiFi by software means and re-activating. This brings speed at par with Kubuntu 9.10 until some time. Can anybody confirm this behaviour?
View 9 Replies
View Related
Jun 5, 2011
I know this has been covered before, and I have searched for two hours with no success. Problem: When trying to connect to public wifi in coffee shops and fast food restaurants, I can connect to the networks fine, but Firefox will not display the page that requires input of a code or terms agreement.
I remember months ago reading something about using the ifup command somehow as a work around, but there must be an easier way.
View 3 Replies
View Related
Aug 4, 2009
Every time I start up my Samsung NC10 the wifi doesn't seem to find my wireless router at all and instead tries to connect to my printers network. To solve this I need to disable and re-enable wireless until it automatically connects. I know this isn't exactly a major problem, it's just getting pretty annoying. I'm using Fedora 11 btw.
View 3 Replies
View Related
Nov 23, 2010
Does fedora13 support pppoe over usb wireless wifi?
View 8 Replies
View Related
Aug 29, 2009
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
View 3 Replies
View Related
May 26, 2010
I am running dual boot of windows professional xp and ubuntu lucid lynx.I am experiencing a slow network with ubuntu.I am connected through trend net wireless N adapter and dlink 524 wireless router.my network icon is down to 1 bar,25-30% mostly.
View 4 Replies
View Related
Oct 4, 2010
Right after playing Assult Cube, I lost my wireless. Folling the directions from this sticky, the information is listed below. Any ideas as to what I can do to get my wireless back?
1. Dell Inspiron 1545
2. lspci
sef@osg:~$ lspci
Code:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[code]...
View 9 Replies
View Related
Sep 7, 2010
I've recently salvaged a computer I found gathering dust in the basement and decided I'll have it running on Fedora (I have a summer studentship coming up that needs Linux use so I thought I'd best start learning!). Following a clean install, Fedora can see the wireless network just fine. I try to connect and nothing happens. Half of the time it will ask for the PSK (yes, I promise I'm entering it correctly) and the other half of the time it will just stop. When it does ask for the PSK I enter it (correctly) and it will ask me again... and again.
Quote:
uname -r
2.6.33.3-85.fc13.i686
Quote:
lspci
00:0b.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
[Code]....
View 11 Replies
View Related
Aug 9, 2011
My wireless card is:
Code:
03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [8086:0083]
On Fedora 15, when I boot kernel 2.6.40, my laptop is unable to connect to my wireless-G AP. dmesg shows the following:
Code:
[ 43.866090] wlan0: direct probe to 00:27:19:14:c2:ca (try 1/3)
[Code].....
It works fine, however, when I boot using kernel 2.6.38 (from which I am posting) and in Windows. Also, I found some emails from the linux-wireless mailing list which appear to be talking about the same problem.
The system is fully updated. I've tried the 11n_disable=1 hint I came across on the ThinkPad wiki, but it didn't help. (I'm on an Asus K42Ja, in case it's relevant)
Although I'm fine with staying at 2.6.38 for now, are there workarounds/fixes for this?
View 7 Replies
View Related
Jun 7, 2011
I just installed Fedora 15 yesterday and can't get wi-fi to work. When I click 'on' on the Wireless label, it goes back to 'off' immediately. When I open the Network Settings menu and disable Airplane mode, the Wireless connection goes on and then off immediately. I took a look at /var/log/messages and it shows this:
[Code].....
View 5 Replies
View Related
Apr 6, 2010
I have a desktop with a printer attached on a wireless link.I have a laptop where I want to print from. The problem is the wireless link comes up only after I log on to the desktop.I would prefer the wireless link (and cups) to be up with out having to log on at the desktop.
How would the run level be changed?
View 5 Replies
View Related
May 5, 2011
Using my laptop, I'm trying to get onto the local library's wireless network, with zero results so far.Basically, I can see the network, but when NetworkManager tries to connect it just spins for a few minutes and then rejects the connection. (Or the connection is rejected by the router) My wireless connection works fine when connecting to my WPA home network.
View 4 Replies
View Related
Jun 20, 2009
I'm having trouble getting my wifi devices to work on my 128bit WEP network. I have a new Thinkpad T400, with an internal Intel PRO/Wireless 5100 AGN. I also have some cardbus cards: a Lucent ORiNOCO Gold, a Linksys Wireless-G, and a TRENDnet TEW-421PC. I have them set up as interfaces eth2, eth1, and eth3. (The TRENDnet isn't recognised as a network card at all, so no interface for it.) I have installed the latest firmware for the Linksys card.
The /etc/sysconfig/network-scripts/ifcfg-* files are virtually identical for all of them, differing only in the HWADDR and DEVICE lines. So here's the behaviour:
1. The Lucent card comes up just fine.
2. The internal 5100AGN and the Linksys cards won't come up, and watching with iwconfig shows that they're either associated with my AP OR they've got an encryption key set -- but not both.
3. When trying to bring up the 5100AGN, I get the following messages:
iwlagn: index 0 not used in uCode key table
iwlagn: index 3 not used in uCode key table
/var/log/messages shows DHCPDISCOVER requests being sent, but they're bound to fail since the association with the AP with WEP isn't being completed. And yes, the ifcfg-* files really *are* identical except for the DEVICE and HWADDR lines. The /etc/udev/rules.d/70-persistent-net.rules file correctly maps the interfaces to the MAC addresses. So why does my antique ORiNOCO card work and thew newer ones fail? How can I track down what's being done wrong/not being done?
View 4 Replies
View Related
Jul 19, 2010
I am going to be away semi permanently and want to create a VPN that will allow me to act as if my laptop was connected to my home network.
All I want is for the drives to be accessible so I can use them for primary access as if they are in the laptop.
Questions:
1. Can I set up a Linux VPN that is secure using public WiFi (or however I connect to the net) when I am on the road?
2. I will be using a desktop (32 bit) as the server, what version of Linux would be best for this?
3. If my server is linux and the server drives are NTFS will they be accessible using a windows machine? (I will be double booting the laptop)
4. I would like to set up a pass-code that is stored on the laptop so that only that machine can get access.
This can be up to 255 characters and encrypted so it would be very hard to break. Even I would not know what it is. (I would store it on a pen drive and be able to recover it from there.)
One more. I might want to add separate users that only have access to their one drive, not the server drive. Is that OK?
View 5 Replies
View Related
May 12, 2009
Hi Guys,
here is my scenario:
I am running F10 x86_64 with Nvidia Quadro FX 3400.
I installed the drivers and it worked just fine. No errors generated according to Nvidia log files.
However, while in run level 5 when I try to switch to run level 3 by typing "telinit 3" or "init 3" the X server goes down and I get a blank screen. Same thing happens when I try to switch to a different tty session by <ctrl>+<alt>+F2 (or any F key for that matter).
I also noticed that when I shut down my system I can't see any more the screen where services are shutting down and their status ([OK] or [failed]).
Would appreciate your help on solving this issue.
View 3 Replies
View Related
Mar 19, 2010
Using an old (5 year) laptop with XP loaded I installed wubi to save altering partitions etc. It all downloaded fine and connected to the internet by wire. I set up the wireless connection using WPA but could not connect. The wirelsss card does see my network and others. After lurking around the forum and trying various things I found that I could connect without encryption. The more I read the more I became confused.
Anyway what I could glean about my Wireless Card it is a Intersil Prism2 mini usb adapter - but also shows up as an Acer ?? Warplink 802.11.
Using lshw I found this reference to wireless
I became even more confused and got a bit lost using the various codes in the terminal and looking up things about drivers etc but would like to persist.
View 1 Replies
View Related
Oct 31, 2010
I just installed Ubuntu 10.10. I was using iBall N 150M USB adapter for internet connection with Windows XP. Let me explain about the present Windows connection :
I am using an Outdoor CPE Wimax. For mobility purpose I have connected this wimax to one LAN port of ADSL+ WiFi router ( Beetel 450 TC1 ). This ADSL+wifi router reset to Factosy settings and enabled DHCP. With this setting , I am perfectly able to connect my laptop to Internet.
When I connect my USB adapter to Ubuntu , intially it detected the signal and asked for credentials. I gave the same and network established. But I am not able to browse the net. If I give [URL]..., its going to the ADSL+Wifi's diagnosis page. With Windows , [URL]... was going to the Wimax modem. After 2-3 trial and error , now Ubuntu also not able to connect to the wifi network.
View 3 Replies
View Related
Dec 14, 2010
Upgraded broadband service yesterday and now using a combined router and modem (Virgin Media Hub). But I now have no wired or wifi internet connectivity on either of my ubuntu 10.10 systems. I tested it on my work laptop which uses Window and it works fine for wired and wifi.
With 10.10 I no longer have a network icon upper right panel to check, so not sure how to set up wireless. Both machines have static IP addresses and are able to ping each other but there is no internet connection on either.
View 5 Replies
View Related
Jul 28, 2010
I have a couple of dell precision boxes running centos 5.4, that are occasionally sent to trade shows. I would like to set them up to connect to wireless networks. Question, what is generally considered the best usb wireless nic to purchase for this distro/release? Also, any opinions on the best wireless aircard and carrier to use, ie; sprint at&t, etc?
View 3 Replies
View Related
Mar 3, 2010
F12 / Gnome 2.28.2 I'm just trying to share the /home/Public folder with my Mandriva laptop. The "manual" on Gnome's website doesn't give much info, other than clicking the option to share the folder and deciding whether to use a password or not. There has to be more to it, otherwise it'd work.
All I'm looking to do is copy files to and from the folder on the desktop machine from the laptop..
View 1 Replies
View Related
Jan 3, 2010
Hello, I have a problem with wireless internet on my laptop - Acer TravelMate 2413LMI with Broadcom BCM 4318 card.
Below are ifconfig, lspci and iwconfig outputs:
ifconfig:
eth0 Link encap:Ethernet HWaddr 00:0a:e4:e6:86:b5
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:20 Base address:0x3000
lo
Link encap:Local Loopback
code....
I forgot to mention that the problem occured after linux 9.10 installation
View 1 Replies
View Related
Mar 11, 2010
I just purchased a RALINK WIRELESS G PCMCIA WIFI CARD VISTA/LINUX (UBUNTU).
It is supposed to be UBUNTU plug and play out of the box with no driver downloads needed.
I installed it but could not find a way to search the active Wi-Fi networks available like on my Actiontec card on windows xp. The wireless router/ethernet I have is an Actiontec setup for Qwest-DSL and Actiontec is the name of the wireless network.
Strangely I tried to choose setup a "new network" and entered Actiontec as the network name and it found the network and said it was connected to it. However the internet still is not working?
View 1 Replies
View Related
Mar 11, 2010
Has anyone ever heard of this card or have knowledge of how to configure it to allow me to get on the internet?
View 1 Replies
View Related
Mar 23, 2010
my laptop can't find the wireless signal of my university's wifi. My room is a bit far, so I wonder if there are solutions for this.
View 1 Replies
View Related
Jul 28, 2009
I am an old Ubuntu user and have just strted running F11 on my iBook. I always run system-config-samba on all my machines including my server and even on my work server which shares with windows, Linux and OSX and have found it to be perfect. I installed it straight away on the new Fedora system but It doesn't seem to be functioning the way i expected it to.
I installed system-config-samba and then set up one share folder "Public" with open read write privileges and then turned off the Fedora Firewall all together. But "public" did not become open until I entered the user password for the fedora machine. But, then I could see all folders on the Fedora machine. Even root on the fedora machine became write-able on the network. This was not the desired effect at all. I am assuming fedora is using a non system-config-samba file share system that I am unfamiliar with. what is it? and how does it work?
View 1 Replies
View Related
Dec 31, 2010
I just upgraded to Ubuntu 10.10 because I was facing internet problems with previous Ubuntu 9.04 after I upgraded it with downloaded software. And now, 10.10 connects to wireless, but shows web-page some-times and repeatedly disconnects. Earlier it wasn't reaching Internet at all. Some of the topics here helped a lot. But this intermittent internet seems not going anywhere. Wired Internet connects easily though.
I've tried :-
-disabling ipv6..... first in Firefox, then in Kernel also
-Setting DNS.....System> Preferences> Network Connections
-setting static Ip
The system still gives trouble.
My system is Asus UL20A.
Wireless:-Atheros AR9285
View 9 Replies
View Related
