I'm using FC10 on my box at work. It is behind an anthenticated proxy for internet connection. In Gnome, I configured the Network Proxy through the GUI, as my browsers too.
So I can browse internet pages, install packages thru Add/Remove Software GUI, but I cant do it in the command line, using yum install, for example. Then trying to figure it out, I saw that it cant reach the package mirrors. It isnt a DNS problem, I set the /etc/resolv.conf correctly, as the host command works correclty. I can ping the local pcs on the network too. Firewall is disabled. Below some simple tests:
[rtovo@davinci ~]$ ping mirrors.fedoraproject.org connect: Network is unreachable [rtovo@davinci ~]$ host mirrors.fedoraproject.org mirrors.fedoraproject.org is an alias for wildcard.fedoraproject.org.
Background: In attempting to move from XP to linux, I have a F14 live USB stick -- can boot Dell M6400, see the internal drive and USB sticks. Wired ethernet network is seen only if ethernet cable is plugged in before booting. Then, I can ping sites by name (yahoo.com, google.com) -- however, FireFox does not load any web-page over the internet -- it does not put up an error message either, it just keeps waiting (it is in on-line mode).Info on the system
uname -a Code: Linux localhost.localdomain 2.6.35.6-45.fc14.x86_64 #1 SMP Mon Oct 18 23:57:44 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux [code]...
I have a small Dell PowerEdge 1650 server with Fedora 12 loaded. We can access the internet, (Google, our home page, Etc.) but can not ping any local or outside IP addressed. Our internal computers can ping each other but not the server. No, it is not the server firewall because we also disabled it and still the same results.
In my Fedora13 machine, while in mobile broadband, i can ping and skype outside, but cannot browse/yum etc. Few output that may be of relevence are here:
$ netstat -s IP: 149468 total packets received 6 with invalid headers 16174 with invalid addresses 0 forwarded 0 incoming packets discarded 118821 incoming packets delivered 101331 requests sent out 124 outgoing packets dropped 866 dropped because of missing route .....
new installation of fedora 14 intel pro/wireless 29251abgeverything ppears to be workingbut ping doesn't workand firefox doesn't workping resolves names but doesn't ping??
recently I got new wireless card, att usb Quicksilver(based/produce by Option?), for att.Regular gnome network manager freezes the computer when I am plugging it it therefore I installed the one from wicd.net.Also, I am using HSOConnect (to connect by to G3 network), and sometimes I connect to regular wireless g connection through router.
Under both cases I can ping the website by IP and can access the website by ip (ex. google) but can not ping or browse by name.As a side note... I can use and access Skype fine under g3 network and normal wireless.I tried browsing and finding other solutions in past few days but ended up breaking everything and reinstalling to get back to the point I am at now.I am working on the road, so not being to broswse is rather crippling to me.... also I can access internet normally only from home from different computer now.
I've just done a clean install of F14.have a wired ethernet connection (no wifi).Initially, I was able to browse the web with Konqueror... but after doing a big package update, and installing Firefox, I can no longer browse any website (Unknown host errors).The strange thing about this is that I can ping successfully via hostname
I know this is not a win-doze forum but i always ask my questions here so here goes.I am having what appears to be a DNS problem on a friends laptop. He is running windows XP. I CAN connect to networks and even ping websites but i CANNOT browse in Internet Explorer or FIrefox.
Ubuntu 11.04, wireless adapter BCM4312.The connection works for a while, for a random length of time from a few minutes to a few hours, then stops working. The laptop says it's connected, and the router says it's connected, but the browser can't find any Web pages, it can't find the router, and there is no response to pings from the router or any other device on the local network or on the Internet. "Host unreachable." When I try to ping to the laptop from another one, it times out.If I shut down the computer and try again a few hours later, it works fine again for a while, then after a while it stops working again.
In case it's relevant, sometimes when I restart networking from the command line, it says "ignoring unknown interface eth1=eth1," even though ifconfig -a lists eth1 as up with an ip address. eth1 is the wireless adapter. Another laptop with Ubuntu 11.04 connects to the same router with no problems.Using a fixed IP address doesn't change anything.
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
I can ping IP addresses of sites, say 209.85.229.99 (google.com), but I cannot ping google.com, nor browse it. Same thing for every alphabetic address and hence in practice I have no internet on my laptop. In windows, I'd just flush DNS but I don't know what to do in Ubuntu. I am using WICD.
I have 4 centos5 apache webservers all on the same network, recently, 2 of the webservers have stopped being able to ping or browse one particular website where feeds are obtained from this site. I have checked and firewall and selinux settings are disabled. The two webservers are able to ping and browse other sites. Dns settings are the same for all 4 servers. traceroute for working and not working webservers are the same.
I have connected xp and fedora through crossover cable . xp has ip address 192.168.0.1/24 (manually assigned) fedora has 192.168.0.2/24 with default route equal to 192.168.0.1
I can ping fedora from xp computer but i can't able to ping xp from fedora computer.
I have manully edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file with correct subnet mask and ip address because when i tried to give ip address manully in network manager the subnetmask is replaced with gateway address don't know why.
Now i want to share internet through crossover cable . xp is connected to internet through wireless usb adapeter.
I am configuring bind9 on fedora 9(sulphur).I have configured /etc/named.conf and created zone file in /var/named/I have started the service but when I am executing the command nslookup mydomain.com it is not able to resolve the name.Another problem I am facing when I do telnet localhost 53,I am able to connect.but when I do telnet myip 53 it does not connect.Seems to be a firewall problem but I ve disabled iptables selinux completely even I ve disabled dnsmasq but still not working.
I have a acer aspire. I recently dual booted with xp and fedora14. we have wifi in the campus and the problem is : I am able to connect to wifi & browse in xp but on the other hand with fedora I am able to connect and the signal is also pretty strong, but I am not able to browse.I am using a firefox mozilla, we also have a proxy for which I have configured all the setttings.The error being displayed is "connection time out".
From today, I am unable browse internet using Fedora 10. Before this, I was using net in F10 with no problem, F10 was automatically configuring for net settings. But now I cannot connect to internet in F10, but I can connect to internet using windows xp. I have ADSL modem which automatically connects to internet when it is switched on. When I press any site name in Firefox it won't display any thing (in status it shows done).
And even following command not works. Code: ping www.google.com
But following command works fine ( I know yum search for software in repo using internet). I wonder how this commend works, while I cannot browse web. Code: yum search player
(I am completely dependent on linux). One more thing before occurrence of this problem I had installed xmms, xmms-mp2 and xmms-skins. I don't think this created problem.
I can browse, add and delete files on my fc13-64 machine from windows xp or vista. But not from the fc13-64 machine to or from any of the windows machines. I have installed samba, smb and nmb are running (reliably) selinux is disabled and the firewall is on; although i have noticed with it off I can't browse in either direction. Can't browse windows with samba but can browse samba with windows, is a problem I overcame with fc-12 but I can't remember how.
# Samba config file created using SWAT # from UNKNOWN (127.0.0.1) # Date: 2010/06/13 11:16:24 [global] workgroup = OFFICE server string = Samba Server Version %v log file = /var/log/samba/log.%m max log size = 50 cups options = raw
[printers] comment = All Printers path = /var/spool/samba printable = Yes browseable = No
[Public] comment = George's Public Folder! path = /home/george/Public read only = No guest ok = Yes
[Downloads] comment = Downloads in George's folder path = /home/george/Downloads read only = No guest ok = Yes
I have a fresh install of Fedora 13 on my Toshiba Notebook. I am able to connect to the internet but can not browse neither by Ethernet or wireless. I have an Intel Pro/Wireless 2200BG wireless card and a Marvell Technology Group LTD 88E8036 PCI-E fast Ethernet card installed. The command ifconfig shows an ip address. I am able to ping by URL and IP address. It does the same with the firewall disabled. I have also disabled the iptable & ip6tables in the services. I have even set fire fox not to use proxy settings. I am just not able to browse at all.
is the following (btw I'm new to linux) - installed f14, connected to WiFi from my home router, started Firefox, and it was not able to open any pageslong with that I successfully updated my system and applications (and even installed new ones) through the same internet connection.Being connected to WiFi on my workplace I am able to browse with firefox, but at home - not...What could be the problem? What additional info should I give?PS. Sorry if the problem was already addressed, I am trying to find the solution on the web - but no success. Also 1-day discussions on ru-net forums were not successful, unfortunately.
I'm using VPNC to connect to a remote cisco network, however I cannot browse the internet after the tunnel establishes. I know this is a DNS issue, as I can ping external address by IP (e.g. google). I can also communicate through the VPN tunnel without trouble.
/etc/resolv.conf gets updated by the VPNC with the remote networks DNS Servers, but I still cannot connect to the internet. I even manually tried to add my local nameserver to the /etc/resolv.conf file, without luck.
Also, just as a side note, I can only establish the tunnel via the command line "vpnc" command. I'm using Fedora 13 with KDE, but knetworkmanager / networkmanager will not establish the tunnel, however I haven't really dug very deep as to why. I've just setup some vpnc config files for loading the various connections manually, as needed.
A couple of days ago I Obtained a spare computer and installed fedora 14 on it, just to try it out. I only have experience with microsoft windows so I'm new to this system. The OS seems to work fine but I can't browse the internet with firefox. I'm using a speedtouch 546 v6 modem with adsl(wired). The network manager indicates that the wired connection "auto eth1" is active. The previous OS was windows xp. I was able to browse the internet whit this OS. I removed it because it was crashing all the time (illegal version).
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
I just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other: