Fedora Networking :: Auto Eth1 Active But Cannot Browse Internet
Nov 8, 2010
A couple of days ago I Obtained a spare computer and installed fedora 14 on it, just to try it out. I only have experience with microsoft windows so I'm new to this system. The OS seems to work fine but I can't browse the internet with firefox. I'm using a speedtouch 546 v6 modem with adsl(wired). The network manager indicates that the wired connection "auto eth1" is active. The previous OS was windows xp. I was able to browse the internet whit this OS. I removed it because it was crashing all the time (illegal version).
View 10 Replies
ADVERTISEMENT
Jul 19, 2011
I cannot Browse Even Internet is Active. Connected using Mobile Broadband using Samsung Mobile USB MODEM. (Modem is recognized Successfully and Connection Shown as active!) I cant browse or even use apt-get update in terminal.. no use. (Even I can see the Gprs icon in the Mobile Phone). WiFi is Perfect in this ubuntu (everything is fine) and Mobile modem working Successfully in Windows too. I have attached the picture.please see it.so you will understand everything
=I==USED==WVDIAL==TOOL===TOOO=
root@saad-laptop:/home/saad# wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- SAMSUNG GT-C6112
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
=EXECUTING==WVDIAL==AND==ITS=RESULT=
root@saad-laptop:/home/saad# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","imis"
AT+CGDCONT=1,"IP","imis"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Mon Jul 18 11:26:54 2011
--> Pid of pppd: 3062
--> Using interface ppp0 ....
=CONFIGURATION==IN==WVDIAL.CONF=
/etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","imis"
Stupid Mode = 1
Modem Type = USB Modem
ISDN = 0
New PPPD = yes
Phone = *99#
Modem = /dev/ttyACM0
Username = a
Password = b
Baud = 460800
View 17 Replies
View Related
Feb 13, 2009
From today, I am unable browse internet using Fedora 10. Before this, I was using net in F10 with no problem, F10 was automatically configuring for net settings. But now I cannot connect to internet in F10, but I can connect to internet using windows xp. I have ADSL modem which automatically connects to internet when it is switched on. When I press any site name in Firefox it won't display any thing (in status it shows done).
And even following command not works.
Code:
ping www.google.com
But following command works fine ( I know yum search for software in repo using internet). I wonder how this commend works, while I cannot browse web.
Code:
yum search player
(I am completely dependent on linux). One more thing before occurrence of this problem I had installed xmms, xmms-mp2 and xmms-skins. I don't think this created problem.
View 4 Replies
View Related
Jun 19, 2009
I'm using FC10 on my box at work. It is behind an anthenticated proxy for internet connection. In Gnome, I configured the Network Proxy through the GUI, as my browsers too.
So I can browse internet pages, install packages thru Add/Remove Software GUI, but I cant do it in the command line, using yum install, for example. Then trying to figure it out, I saw that it cant reach the package mirrors. It isnt a DNS problem, I set the /etc/resolv.conf correctly, as the host command works correclty. I can ping the local pcs on the network too. Firewall is disabled. Below some simple tests:
[rtovo@davinci ~]$ ping mirrors.fedoraproject.org
connect: Network is unreachable
[rtovo@davinci ~]$ host mirrors.fedoraproject.org
mirrors.fedoraproject.org is an alias for wildcard.fedoraproject.org.
[Code].....
View 3 Replies
View Related
Dec 1, 2009
I have a Fedora 11 system and cbq.init-v0.7.3 in it. Now I want to restrict upload speed from my ftp server to Internet (eth1). According to docs I've made a simple file /etc/sysconfig/cbq/cbq- 00.inet_upload_restrict:
DEVICE=eth1,100Mbit,10Mbit
RATE=800Kbit
WEIGHT=80Kbit
PRIO=5
RULE=:20,
So as you can see I want to limit outbound traffic on eth1 from my ftp port 20 to any to the 800Kbit/s (100Kbyte/s). Now I do cbq start, it says: find: warning: you have specified the -maxdepth option after a non-option argument (, but options are not positional (-maxdepth affects tests specified before it as well as those specified after it). Please specify options before other arguments.
find: warning: you have specified the -maxdepth option after a non-option argument (, but options are not positional (-maxdepth affects tests specified before it as well as those specified after it). Please specify options before other arguments. but it starts and works. Now I check the speed and it is...
View 3 Replies
View Related
Sep 20, 2010
I'm using VPNC to connect to a remote cisco network, however I cannot browse the internet after the tunnel establishes. I know this is a DNS issue, as I can ping external address by IP (e.g. google). I can also communicate through the VPN tunnel without trouble.
/etc/resolv.conf gets updated by the VPNC with the remote networks DNS Servers, but I still cannot connect to the internet. I even manually tried to add my local nameserver to the /etc/resolv.conf file, without luck.
Also, just as a side note, I can only establish the tunnel via the command line "vpnc" command. I'm using Fedora 13 with KDE, but knetworkmanager / networkmanager will not establish the tunnel, however I haven't really dug very deep as to why. I've just setup some vpnc config files for loading the various connections manually, as needed.
View 1 Replies
View Related
Apr 5, 2011
my wvdial.conf file content is:
[Dialer Defaults]
Modem=/dev/ttyACM0
Baud=460800
[code]....
View 2 Replies
View Related
Mar 30, 2010
Like the forum for #1I'm using debian 5.0 with a modem to connect to the internetand eth1 to network my home computers. When I try to browse the internet with Konqueror, I have to disable eth1 then wvdial just to browse the internet. How do I fix this?Note: My resolv.conf has my primary DNS address in it, for my ISP (nameserver 67.211.172.29) and so on.
View 2 Replies
View Related
Aug 24, 2010
I have a bit of a "unique" situation here. I have myself plugged into two networks - since we run two networks here at work (long story, we merged and never combined them due to two different companies) and want to block ALL internet access off eth1, and only have it off eth0. I only want traffic from 192.168.67.1-192.168.67.255 allowed on eth1, but everything allowed on eth0. Or is there a way for the internet/applications to be on eth0 instead of eth1? Would I use iptables or something?
View 4 Replies
View Related
May 11, 2011
im a linux noob dont get techy ill die of brain fry im running a craft bukkit minecraft server on my 11.04 ubuntu server. however the server uses my only 10m Ethernet cable that i normaly use for my ps3 (i will NOT go wireless. i hate it (or dont like it)) therefor i found an old PCI NIC in an old computer, its a 10/100 realtek one. ifconfig detects it (after two commands:
Code:
ifconfig eth0 up
dhclient eth0
)
now i need to send the internet to my ps3 too.i know the connection wont be blazing fast but isnt it okay?it musnt interrupt the minecraft server. if you need info just ask. ill try and provide them.
View 1 Replies
View Related
Oct 14, 2010
I have installed ubuntu a few times in the past but if I've had to get messy with the command line I bailed. So given that I wanted to set up a home server/media center, I tried win server, but given research had told me that it is easier to accomplish all the features I wanted with Linux I decided the time had come to really see what I'd been missing out on. So what I am looking to accomplish is a full lamp stack, xbmc, samba, mail server, VMWare server, rtorrent, ftp, an probably a few others I have forgot because I can't get to my check list right now. Settled on ubuntu 10.10, had installed it a couple of times while it was still in beta, just to get a feel for it and get everything working so that when it was released I could do a fresh install knowing how to configure everything.
So on Sunday the time came. Everything was going fine until last night, I was installing roundtable webmail and all I came to download something and FireFox can't display any web pages, postfix can't deliver mail. The server can ping local machines but not google.com or another internet site, I can ssh into it an get a remote desktop session via various methods, both either over the local network, or internet. The website is getting served both locally or internet. I just cant seem to make any outbound connections to the outside world.
View 8 Replies
View Related
Sep 20, 2010
Running Ubuntu 9.10.
I'm connecting to a network via a Belkin F7D1101. The adapter appears to be working fine, as I can see various wireless networks available and I am able to connect to my personal wireless network. The problem is that even though I am connected and have a valid IP, I am unable to browse the Internet. I can't even ping the router!
I initially thought it may be an issue with WPA, but I have installed wpa-supplicant and as a means of testing, I turned off WPA on the router, and the issue still stands.
View 7 Replies
View Related
Oct 20, 2010
I just installed a fresh copy of Ubuntu 10.10 on a HP DV2500 laptop. Everything installed as expected but I am having some wireless issues I was hoping somebody could assist me with. I am able to connect to my network via wireless with no issues. However, when I attempt to browse the internet it will not connect to any pages. Obviously when I connect it via CAT 5 all works as expected. Any ideas on how to solve my wireless issues?
View 1 Replies
View Related
Sep 24, 2010
i have installed Linux i.e ubuntu 10.04 on my PC in which i have installed pptp client and able to connect it successfully but problem is that it unable to browse internet. in windows it works fine.
View 1 Replies
View Related
Mar 4, 2011
I need to setup two ethernets in my Centos box. OK no problem both ethernet and 1 virtual works perfect. eth0, eth1 and eth1:0. I'm trying to set up diferent routes for eth0 and eth1/eth1:0 I need eth0 has a 192.168.1.1 gateway and eth1/eth1:0 192.168.1.100 gateway.I think I've tried almost every thing but always get one gateway for all the eth.These are my config..
/sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:XX:XX:XX:XX:XX
inet addr:192.168.1.168 Bcast:192.168.1.255 Mask:255.255.255.0[code]......
View 7 Replies
View Related
Feb 13, 2009
When the dsl modem connected to net I cant browse pages through my fedora9 in my desktop. I never had the same prob before I used it a hour ago now it is not working. The connection established symbol comes and the ip addresses are assigned by dhcp and the connection is eth0 and I can use the same in windows xp so the router and internet connection have no prob. I cant ping through fedora and I can ping my own IP address, I can access my router only the browsing have problem my browser is firefox.
View 1 Replies
View Related
Aug 5, 2009
A few days ago my wireless windows vista computer internet was running slow so i reset the modem. Then I went on the internet on my ubuntu machine machine and went to www.google.com and couldn't connect to the server so i tried linuxquestions and i couldn't connect but i could ping sites. My wired and wireless windows computers worked fine. So I called Comcast (my ISP) and said it was a router issue. So I looked online and it said to disable IPv6 on firefox so I did but that still didn't work.
View 12 Replies
View Related
Jan 31, 2010
I have recently installed Fedora 12 on my pc but I am not able to browse the internet although the network icon shows the computer is connected.
I tried the dig command and got the following message:global options +cmd; connection timed out; servers could not be reached;
View 6 Replies
View Related
Jun 14, 2010
i have the following ip assignments
fedora (iptables)
eth0 -private :192.168.1.1
eth1 -public : 186.117.50.6
squid proxy
192.168.1.10:3128
my clients range
192.168.2.0/24
how can i make my clients to browse internet only from proxy server my network is NAT 'ed. Please specify a iptable rule to allow internet access for my clients to browse ONLY if they come through proxy server.
View 1 Replies
View Related
Jul 16, 2010
i was using ubuntu 9.10 till recently when i decided to upgrade to ubuntu lucid 10.04. turns out the internet icon shows connected after fresh installation but when i try to use firefox , after an long wait it shows server not found. i did a research of my own and found that i am not able to ping even my router.using sudo dhclient eth0 doesn't recieve offers , but surprisingly when i tried dhclient eth0 in root shell with networking internet got configured very quickly and i can ping the router and any website.i forgot to mention i have a wired connection which i am trying to connect and the net is working fine with windows 7 on the same PC.
View 2 Replies
View Related
Jan 21, 2010
I know this is not a win-doze forum but i always ask my questions here so here goes.I am having what appears to be a DNS problem on a friends laptop. He is running windows XP. I CAN connect to networks and even ping websites but i CANNOT browse in Internet Explorer or FIrefox.
View 1 Replies
View Related
Apr 18, 2010
This holds true in Transmission and NOT in Vuze. UPnP is enabled, ports are randomized and open each time. Pings to outside still work fine, but I cannot browse to websites (404 errors) when the app is running. I'm stumped, is Transmission locking all other in bound traffic/ports except the one it wants to use?
View 2 Replies
View Related
Jul 2, 2010
My machine has Ubuntu 10.4, installed a week ago. I'm connecting to the Internet with a Wireless 3G modem, the interface is named ppp0. Additionally, I have a network card that is connected to a home router, that's eth0. Everything works fine with eth0 disabled, all my apps can access the internet correctly. But, my issue is that when i enable eth0, i can't access the internet with any app.
So why do i need eth0 anyway? The thing is that i must share my internet connection with my sister, who is also connected to our home router. I planned to give her access by installing squid on this machine and configuring her browser to connect to squid. However, since none of my apps can connect to the internet while eth0 is active (whereas squid and all other apps work fine with eth0 disabled) I can't let her connect to squid while squid is working correctly.BTW selecting "use this connection only for resources on its network" under "routes..." of the ipv4 tab of "Auto Ethernet" made it a little better. Firefox and Xchat started to work with eth0 active. Squid still doesn't work though (althought it works just fine with eth0 disabled)
View 4 Replies
View Related
Mar 13, 2011
I am running the latest ubuntu and I am having trouble getting networking sorted. I have 2 networks, one wired (eth0) and one wireless (wlan0). I connect to the internet using wireless. The problem is that I can only successfully connect to the internet if I disconnect from eth0. I have hit this problem with Windows machines and the solution was to adjust the "interface metric" in "Advanced TCP/IP Settings" so that the wireless was the preferred connection. How can I achieve something similar in Ubuntu?
View 1 Replies
View Related
Jul 30, 2010
I try to generate a server client code. What i try to do is sending video streams from eth0 and eth1 to the other server programs' eth0 and eth1. In order to do that, i decided to use SO_BINDTODEVICE. But the code is not working. Am i misunderstood the usage of SO_BINDTODEVICE.
1-Defining two ports
2-Defining two sockets
3-Assigning host ips on them
[code]....
View 3 Replies
View Related
Apr 3, 2009
I have two network devices :
1. Intel Corporation 82574L Gigabit Network Conncection (Currently eth0, Mac=00:0e:8c:ab:c6:b1)
2. National Semiconductor Corporation DP83815 (Currently eth1, Mac=00:0e:8c:8a:70:62)
I want to change them so that the "Intel" become eth1 device and the "National" become the eth0 device.
I already tried these steps :
1. I disabled the Network Manager and enabled network
2. Edit the /etc/udev/rules.d/70-persistent-net.rules like this
Quote:
3. Change the /etc/sysconfig/network-scripts/ifcfg-eth0 and /etc/sysconfig/network-scripts/ifcfg-eth1 MAC addresses.
4. Reboot
5. After it bootup the Fedora can't recognize the devices, if I do ifconfig -a it shows "eth0_rename with FF:FF:FF:FF:FF:FF mac address".
View 3 Replies
View Related
Jan 31, 2010
I have two network interfaces on my computer but only one of them is connected to an Ethernet cable. Until now on every Fedora release, the activated primary interface has been named as eth0 and everything has always worked well without any problem. Recently I switched to Fedora Core 12 and surprisingly I observed that for the first time, my primary interface has been considered by the system to be eth1 instead of eth0. I tried to replace the content of ifcfg-eth0 by ifcfg-eth1, yet system gave me an error that there was MAC address mismatching. I conserved their MAC addresses in their files and just replaced other connection parameters ( such as IP ADDR, NETWORK, NETMASK, etc.) but it did't work. When I do "server network restart", the command blocks.
As I try to install oracle on this system, regarding the fact that oracle requires static network configuration on the primary network interface, I don't know how to proceed in order to set eth0 as my primary interface (or rather set the current eth1 to eth0 because it is actually eth1 that refers to my activated primary network card).Just one more time, I would like to remark, that with previous versions of the Fedora Core, on the same computer (with the very same two network cards) I never had problem and I had installed oracle on the system with success, having the statically configured eth0 correctly detected by the system.
View 2 Replies
View Related
Mar 15, 2011
I recently upgraded mu Fedora 13 to Fedora 14, I decided to add another NIC that I assumed it'll be eth1, when I boot the PC and typed #ifconfig eth0, eth1, lo appears. But when I typed #setup eth1 is not present. Why is that? I remembered doing this in Centos 5.5 but it automatically appears after I added a NIC and boot the pc? what should I do?
View 2 Replies
View Related
Jan 12, 2010
I am trying to setup linux box as router.
What i am trying to do is:
1. I am trying to setup NIC via network not NetworkManager
2. I have assigned the ip to both NIC with #ifconfig eth0 192.168.1.1
3. #Ifconfig shows my nic and ip
4. restart the service network .
5. #ifconfig shows nothing. NO NIC card
I dont want the network manager coz i dont want to install the gui on router and network manager works only in gui mode. ( i think my this understanding is correct)
I tried to configure the NIC with Network Manager
When ever i restart the network service i have no out put from ifconfig
I tried to configure the NIC with #setup command as well and select the dhcp option
I can not find any ifcfg-eth0 in /etc/sysconfig/networking-scripts/
View 6 Replies
View Related
Aug 7, 2010
How can I convert eth1 back into eth0 on Fedora 13? I searched /etc for eth1 and found it in 70-persistent-net.rules, but eth0 is still in the ifcfg scripts.
View 5 Replies
View Related
