Fedora Networking :: Can't Browse Internet But Cant Ping On F10
Jun 19, 2009
I'm using FC10 on my box at work. It is behind an anthenticated proxy for internet connection. In Gnome, I configured the Network Proxy through the GUI, as my browsers too.
So I can browse internet pages, install packages thru Add/Remove Software GUI, but I cant do it in the command line, using yum install, for example. Then trying to figure it out, I saw that it cant reach the package mirrors. It isnt a DNS problem, I set the /etc/resolv.conf correctly, as the host command works correclty. I can ping the local pcs on the network too. Firewall is disabled. Below some simple tests:
[rtovo@davinci ~]$ ping mirrors.fedoraproject.org
connect: Network is unreachable
[rtovo@davinci ~]$ host mirrors.fedoraproject.org
mirrors.fedoraproject.org is an alias for wildcard.fedoraproject.org.
[Code].....
View 3 Replies
ADVERTISEMENT
Jan 21, 2010
I know this is not a win-doze forum but i always ask my questions here so here goes.I am having what appears to be a DNS problem on a friends laptop. He is running windows XP. I CAN connect to networks and even ping websites but i CANNOT browse in Internet Explorer or FIrefox.
View 1 Replies
View Related
Dec 28, 2009
I've got a weird problem on my fedora 12.
My computer is running behind an ISP box, Firewall shut off, SELinux disabled.
I've a local IP address : 192.168.0.2 dynamically given by the ISP through DHCP
I've got bind installed. I've defined a domain (let's call it mydomain.com) in the /etc/named.conf this way :
Code:
//
// named.conf
//
// Provided by Red Hat bind package to configure the ISC BIND named(8) DNS
[Code].....
Finally, the named service is running.
Here is the trouble : I can ping my domain, but when I try to browse to this domain in my browser, the connection is rejected !
View 2 Replies
View Related
Feb 28, 2011
Background: In attempting to move from XP to linux, I have a F14 live USB stick -- can boot Dell M6400, see the internal drive and USB sticks. Wired ethernet network is seen only if ethernet cable is plugged in before booting. Then, I can ping sites by name (yahoo.com, google.com) -- however, FireFox does not load any web-page over the internet -- it does not put up an error message either, it just keeps waiting (it is in on-line mode).Info on the system
uname -a
Code:
Linux localhost.localdomain 2.6.35.6-45.fc14.x86_64 #1 SMP
Mon Oct 18 23:57:44 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
[code]...
View 2 Replies
View Related
Jul 18, 2011
I have a small Dell PowerEdge 1650 server with Fedora 12 loaded. We can access the internet, (Google, our home page, Etc.) but can not ping any local or outside IP addressed. Our internal computers can ping each other but not the server. No, it is not the server firewall because we also disabled it and still the same results.
View 9 Replies
View Related
Oct 5, 2010
In my Fedora13 machine, while in mobile broadband, i can ping and skype outside, but cannot browse/yum etc. Few output that may be of relevence are here:
$ netstat -s
IP:
149468 total packets received
6 with invalid headers
16174 with invalid addresses
0 forwarded
0 incoming packets discarded
118821 incoming packets delivered
101331 requests sent out
124 outgoing packets dropped
866 dropped because of missing route .....
View 3 Replies
View Related
Nov 22, 2010
new installation of fedora 14 intel pro/wireless 29251abgeverything ppears to be workingbut ping doesn't workand firefox doesn't workping resolves names but doesn't ping??
View 2 Replies
View Related
Apr 23, 2010
recently I got new wireless card, att usb Quicksilver(based/produce by Option?), for att.Regular gnome network manager freezes the computer when I am plugging it it therefore I installed the one from wicd.net.Also, I am using HSOConnect (to connect by to G3 network), and sometimes I connect to regular wireless g connection through router.
Under both cases I can ping the website by IP and can access the website by ip (ex. google) but can not ping or browse by name.As a side note... I can use and access Skype fine under g3 network and normal wireless.I tried browsing and finding other solutions in past few days but ended up breaking everything and reinstalling to get back to the point I am at now.I am working on the road, so not being to broswse is rather crippling to me.... also I can access internet normally only from home from different computer now.
View 9 Replies
View Related
Feb 13, 2009
From today, I am unable browse internet using Fedora 10. Before this, I was using net in F10 with no problem, F10 was automatically configuring for net settings. But now I cannot connect to internet in F10, but I can connect to internet using windows xp. I have ADSL modem which automatically connects to internet when it is switched on. When I press any site name in Firefox it won't display any thing (in status it shows done).
And even following command not works.
Code:
ping www.google.com
But following command works fine ( I know yum search for software in repo using internet). I wonder how this commend works, while I cannot browse web.
Code:
yum search player
(I am completely dependent on linux). One more thing before occurrence of this problem I had installed xmms, xmms-mp2 and xmms-skins. I don't think this created problem.
View 4 Replies
View Related
Dec 23, 2010
I have a DSL connection, DHCP, able to browse and no problem with that.
But I can't ping websites or their ip address. Should I be worried? I'm using Maverick through Wubi.
View 1 Replies
View Related
Nov 7, 2010
I've just done a clean install of F14.have a wired ethernet connection (no wifi).Initially, I was able to browse the web with Konqueror... but after doing a big package update, and installing Firefox, I can no longer browse any website (Unknown host errors).The strange thing about this is that I can ping successfully via hostname
View 2 Replies
View Related
Sep 20, 2010
I'm using VPNC to connect to a remote cisco network, however I cannot browse the internet after the tunnel establishes. I know this is a DNS issue, as I can ping external address by IP (e.g. google). I can also communicate through the VPN tunnel without trouble.
/etc/resolv.conf gets updated by the VPNC with the remote networks DNS Servers, but I still cannot connect to the internet. I even manually tried to add my local nameserver to the /etc/resolv.conf file, without luck.
Also, just as a side note, I can only establish the tunnel via the command line "vpnc" command. I'm using Fedora 13 with KDE, but knetworkmanager / networkmanager will not establish the tunnel, however I haven't really dug very deep as to why. I've just setup some vpnc config files for loading the various connections manually, as needed.
View 1 Replies
View Related
Feb 1, 2011
I have a edimax USB wireless and as soon as I plugged it in it worked i.e., it is able to connect to a wireless.
[Code]....
View 5 Replies
View Related
Nov 8, 2010
A couple of days ago I Obtained a spare computer and installed fedora 14 on it, just to try it out. I only have experience with microsoft windows so I'm new to this system. The OS seems to work fine but I can't browse the internet with firefox. I'm using a speedtouch 546 v6 modem with adsl(wired). The network manager indicates that the wired connection "auto eth1" is active. The previous OS was windows xp. I was able to browse the internet whit this OS. I removed it because it was crashing all the time (illegal version).
View 10 Replies
View Related
Apr 5, 2011
my wvdial.conf file content is:
[Dialer Defaults]
Modem=/dev/ttyACM0
Baud=460800
[code]....
View 2 Replies
View Related
Jan 19, 2010
Host - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
View 2 Replies
View Related
Feb 1, 2011
In Fedora 14 (kernel 2.6.35.10-74.fc14.i686) I am not able to get an internet connection on my laptop via mobile broadband. However dialing succeeds and the provider starts the daily flate rate accounting.I tried the graphical network management as well as wvdial and even sakis3g (achitecture free variant from URl...).With wvdial (well configured I think) and sakis3g the dial connection is established (permanent blue light on Huawei E169). "netstat -ie" shows that the network configuration has changed (device pp0 instead of eth0 and "netstat -rn" shows that default router is set to 10.64.64.64). But "ping" does not receive data from any internet IP address and browser cannot render any website. A later check call of my prepaid balance said that the daily rate countdown was initiated (so I pay for nothing).
The GUI of the KDE network icon seems to work similar but does not set the usb key into the connected state (only blinking blue light and break-off after a few seconds).Disabling of selinux didn't change anything as well.With Mandriva 2010 I didn't have any problems with same mobile key and provider.
View 4 Replies
View Related
Jul 7, 2011
Ubuntu 11.04, wireless adapter BCM4312.The connection works for a while, for a random length of time from a few minutes to a few hours, then stops working. The laptop says it's connected, and the router says it's connected, but the browser can't find any Web pages, it can't find the router, and there is no response to pings from the router or any other device on the local network or on the Internet. "Host unreachable." When I try to ping to the laptop from another one, it times out.If I shut down the computer and try again a few hours later, it works fine again for a while, then after a while it stops working again.
In case it's relevant, sometimes when I restart networking from the command line, it says "ignoring unknown interface eth1=eth1," even though ifconfig -a lists eth1 as up with an ip address. eth1 is the wireless adapter. Another laptop with Ubuntu 11.04 connects to the same router with no problems.Using a fixed IP address doesn't change anything.
View 8 Replies
View Related
Oct 14, 2010
I have installed ubuntu a few times in the past but if I've had to get messy with the command line I bailed. So given that I wanted to set up a home server/media center, I tried win server, but given research had told me that it is easier to accomplish all the features I wanted with Linux I decided the time had come to really see what I'd been missing out on. So what I am looking to accomplish is a full lamp stack, xbmc, samba, mail server, VMWare server, rtorrent, ftp, an probably a few others I have forgot because I can't get to my check list right now. Settled on ubuntu 10.10, had installed it a couple of times while it was still in beta, just to get a feel for it and get everything working so that when it was released I could do a fresh install knowing how to configure everything.
So on Sunday the time came. Everything was going fine until last night, I was installing roundtable webmail and all I came to download something and FireFox can't display any web pages, postfix can't deliver mail. The server can ping local machines but not google.com or another internet site, I can ssh into it an get a remote desktop session via various methods, both either over the local network, or internet. The website is getting served both locally or internet. I just cant seem to make any outbound connections to the outside world.
View 8 Replies
View Related
Sep 20, 2010
Running Ubuntu 9.10.
I'm connecting to a network via a Belkin F7D1101. The adapter appears to be working fine, as I can see various wireless networks available and I am able to connect to my personal wireless network. The problem is that even though I am connected and have a valid IP, I am unable to browse the Internet. I can't even ping the router!
I initially thought it may be an issue with WPA, but I have installed wpa-supplicant and as a means of testing, I turned off WPA on the router, and the issue still stands.
View 7 Replies
View Related
Oct 20, 2010
I just installed a fresh copy of Ubuntu 10.10 on a HP DV2500 laptop. Everything installed as expected but I am having some wireless issues I was hoping somebody could assist me with. I am able to connect to my network via wireless with no issues. However, when I attempt to browse the internet it will not connect to any pages. Obviously when I connect it via CAT 5 all works as expected. Any ideas on how to solve my wireless issues?
View 1 Replies
View Related
Sep 24, 2010
i have installed Linux i.e ubuntu 10.04 on my PC in which i have installed pptp client and able to connect it successfully but problem is that it unable to browse internet. in windows it works fine.
View 1 Replies
View Related
Feb 13, 2009
When the dsl modem connected to net I cant browse pages through my fedora9 in my desktop. I never had the same prob before I used it a hour ago now it is not working. The connection established symbol comes and the ip addresses are assigned by dhcp and the connection is eth0 and I can use the same in windows xp so the router and internet connection have no prob. I cant ping through fedora and I can ping my own IP address, I can access my router only the browsing have problem my browser is firefox.
View 1 Replies
View Related
Aug 5, 2009
A few days ago my wireless windows vista computer internet was running slow so i reset the modem. Then I went on the internet on my ubuntu machine machine and went to www.google.com and couldn't connect to the server so i tried linuxquestions and i couldn't connect but i could ping sites. My wired and wireless windows computers worked fine. So I called Comcast (my ISP) and said it was a router issue. So I looked online and it said to disable IPv6 on firefox so I did but that still didn't work.
View 12 Replies
View Related
Jul 15, 2011
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
View 2 Replies
View Related
Jul 17, 2009
I have a strange problem for internet. My clients (winxp - S2) can't get internet.Let me explain my scenerios. Fedora 10 with lan (eth0) having direct internet from dsl model, client (XP service pack 2) can use samba shares using dhcp (wlan0) installed in Fedora 10 box. client can ping my linux box.Now problem is: client (dosbox) can ping the google ip address (i.e ping 74.125.39.106) but can't use 'ping www.google.com'. That means ping with ip works for internet from my client. My linux box can. I can use internet from FC10 but can't use iexplorer from my client to have internet. I have enable ipmasquarding in Firewall and dhcpd is running on wlan0 for dynamic ip address of my clients.Can someone suggest me what kind of problem having I? What should i do to success iexplorer for internet? what possibly am i missing?
View 3 Replies
View Related
Feb 16, 2010
I can ping IP addresses of sites, say 209.85.229.99 (google.com), but I cannot ping google.com, nor browse it. Same thing for every alphabetic address and hence in practice I have no internet on my laptop. In windows, I'd just flush DNS but I don't know what to do in Ubuntu. I am using WICD.
View 9 Replies
View Related
Jan 31, 2010
I have recently installed Fedora 12 on my pc but I am not able to browse the internet although the network icon shows the computer is connected.
I tried the dig command and got the following message:global options +cmd; connection timed out; servers could not be reached;
View 6 Replies
View Related
Jun 14, 2010
i have the following ip assignments
fedora (iptables)
eth0 -private :192.168.1.1
eth1 -public : 186.117.50.6
squid proxy
192.168.1.10:3128
my clients range
192.168.2.0/24
how can i make my clients to browse internet only from proxy server my network is NAT 'ed. Please specify a iptable rule to allow internet access for my clients to browse ONLY if they come through proxy server.
View 1 Replies
View Related
Nov 11, 2010
I have 4 centos5 apache webservers all on the same network, recently, 2 of the webservers have stopped being able to ping or browse one particular website where feeds are obtained from this site. I have checked and firewall and selinux settings are disabled. The two webservers are able to ping and browse other sites. Dns settings are the same for all 4 servers. traceroute for working and not working webservers are the same.
View 1 Replies
View Related
