Mysql is installed and I have checked it on three places to make sure it is. I tried to start the service or start mysql but no luck I can't find it anywhere and I cannot get it to run. It is also not under /etc/init.d
View 9 Replies
long time user of redhat, first time user of fedora...
Installed fedora 10 to the hard drive (building a new web server, switched from RHEL5)
Started to install everything I need, apache, php, mysql, odbc, iseries access for linux, etc...
Got to the php modules, installed php-odbc, php-mysql, etc... but php doesn't see the mysql module
doing a phpinfo() produces -without-mysql
uninstalled it, reinstalled it (this is all done through kpackagekit so far) - no good
uninstalled and tried to reinstall via yum, no good
all the config files are fine - copied my php.ini from the old server and let the installs create the new mysql ini files
how to get it in ? this is my last step before i can begin pen and vulnerability testing it.
it seems i have successfully installed LAMP.. i have a very basic page below that works when invoking "data()" but when i try to connect to mysql server (by removing the comments "//") it would just return a blank page.
[Code]...
I installed lampserver and took measures to see that apache would only serve 127.0.0.1 (Which appears to be a software switch as ipconfig says it's port is still "Open")
Mysql however, could be vulnerable: Do I need to secure it or does it only serve localhost? If so, how do I secure it?
I am marking this solved because I believe it is posted in the wrong forum. I will repost in Software. Sorry for the mistake. I have a small website that I want to host from home. I'm able to access it through the public IP but have not been successful in setting up the zones in PowerDns using PowerAdmin to resolve the domain name. I have read several sites regarding the issue but I still have no success. I'm hoping someone may be able to help with editing my master zone in order to resolve the domain name. I am using CentOS 5.5 to host the site and I've installed mysql as the backend to PowerDNS.
View 3 Replies View RelatedI'm rather new to linux and I am trying to set up two linux servers to do MySQL replication. I believe to do this you need to have a file called my.cnf in /etc/ but this file isn't there I have tried un-installing and installing MySQL many times but this file still doesn't appear.
View 4 Replies View RelatedI have spent over half of the day, literally, trying to get my server to parse perl and be able to use perl scripts to interact with my SQL server. Has anyone been able to get it to work? Only looking for answers to Slackware. There are a lot of resources for FC and Ubuntu, but that does me no good. I checked the Slackbuilds for their builds, and built the libdbi and libdbi-drivers package, but still cannot get it to communicate.
View 1 Replies View RelatedMysql starting problem after changing mysqladmin password.I tried all the solutions available on forums, but not solve the problem.At last I restored the mysql db backup, this make mysql service start, but till other databases not showing all tables.
View 1 Replies View RelatedI've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.
Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.
Howver, just been trying to again to fix the problems with downgrading mysql and get:-
Error: Package: mysql-server-5.1.55-1.fc14.i686 (@updates)
Requires: mysql(x86-32) = 5.1.55-1.fc14
Removing: mysql-5.1.55-1.fc14.i686 (@updates)
mysql(x86-32) = 5.1.55-1.fc14
I have the latest LAMP running on F10 but need to do a database conversion from mysql 4.1.22 to mysql 5 for a client.
View 4 Replies View RelatedI have mysql downloaded and when I type mysql into the command line I get this:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111)
I have just installed joomla and proceeded to do the web install. Got the interface up and running and its now complaining it does not see the mysql server running. I do in fact have it running. Veryfied it with mysql command on command line and it complained with missing attributes.
I read a thread that it needs php-mysql installed. So went to proceed to install it. Well, I did not have that and went to install it. Verified it. Package mysql-server-5.0.77-3.el5.i386 already installed and latest version
I then did a service mysql reset.
Checked back at the joomla web install interface and still, it says there is no mysql support! What is next? Im running centos OS. Also, I am running LAMP
I am trying to locate the path for MySQL installed trough LAMP. if someone could point it for me or how to locate this path.
View 1 Replies View Relatedi am trying to set up LAMP on an old pc i have installed linux, apache, mySQL and PHP following this guide Installing Apache2 With PHP5 And MySQL Support On OpenSUSE 11.3 (LAMP) | HowtoForge - Linux Howtos and Tutorials. i have installed phpMyAdmin but when i try and acess it i get this error
Error
MySQL said:
Cannot connect: invalid settings.
phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server.
[Code]...
Been working with this problem for over a week now and has come to a dead end, I have installed pureFTPD with MySQL on Debian 5 Lenny 64bit. My problem is I can't login with the users in the sql-database, but for some strange reason, I'm allowed to loggin as anonymous. Unix users can't login either.
I have followed the guide on: [URL]..
- Created a ftpgroup and ftpuser.
- Created a database ftpd
- Created a user vhosts and given access to ftpd db
My configurations files
/etc/pure-ftpd/auth/30mysql
Code:
/etc/pure-ftpd/db/mysql.conf
/etc/pure-ftpd/db/mysql.conf
[Code]...
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
i am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
I am trying to get mysql to start at boot without any success.
The mysqld scripts works fine when run from the command line, but it does not work when i use the links created by chkconfig. I checked the boot.log and found that mysql starts but then it stops or gets shutdown. This is the log message:
Starting mysqld daemon with databases from /data/mysql [ OK ]
Starting cups: [ OK ]
STOPPING server from pid file /var/run/mysqld/mysqld.pid
starting DenyHosts: /usr/bin/denyhosts.py --daemon --config=/usr/share/denyho
sts/denyhosts.cfg
090727 04:35:47 mysqld ended
The same init script works fine in Ubuntu.
I have a RHEL5 machine having mysql5.0.22 is installed in it. i also installed java through "jdk-1_5_0_19-linux-i586.bin" package, and its version is 1.5.0_19. I am trying to check if any JDBC driver for Mysql Server is installed on my system . How can I do this? If any driver is already installed How can I get the file path for those driver files? is it comes along with jdk packages? As i am not a programmer, and does't know more about jdbc.
View 1 Replies View RelatedI have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
I'm having problems connecting to the mysql database on my system. I first noticed this when I was trying to set up the program anymeal. I subsequently tried using MySQL Administrator (mysql-admin), but had no luck. It gives my the following feedback:
Code:
Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Click the 'Ping' button to see if there is a networking problem. I press the ping button, and it seems to connect.
Code:
I've downloaded and installed MySQL-client-5.1.53-1.glibc23.x86_64.rpm. I'm rather new to linux so it might be I haven't started the server. Unfortunately I have no idea which file is responsible for that. It is also possible that my head isn't functioning correctly ( if at all ).
Error I receive is:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
i was trying to allow remote access to mysql by following mysql was running perfectly until i got here :
Code:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
i changed my.cnf bind-address line to : "bind-address = 127.0.0.1" and nothing
[code]....
How do I create a new mysql user and a mysql database at the shell prompt?
View 1 Replies View RelatedPam-mysql can not connect to the database and below are my configurations.
saslfinger -s Output:
root@mailbackup:/# saslfinger -s
saslfinger - postfix Cyrus sasl configuration Tue May 10 10:12:10 EAT 2011
version: 1.0.2
mode: server-side SMTP AUTH
-- basics --
Postfix: 2.7.2
System: Slackware 13.1.0
-- smtpd is linked to --libsasl2.so.2 => /usr/local/lib/libsasl2.so.2 (0x00007f74ebfb7000)
-- active SMTP AUTH and TLS parameters for smtpd --
-- listing of /usr/lib64/sasl2 --
-- listing of /usr/local/lib/sasl2 --
-- content of /usr/lib64/sasl2/smtpd.conf --
-- content of /usr/local/lib/sasl2/smtpd.conf --
-- active services in /etc/postfix/master.cf --
-- mechanisms on localhost --
getting foll error during 'make' part of compilation of mysql v5.5.6rc
Code:
libtool: link: unsupported hardcode properties
libtool: link: See the libtool documentation for more information.
libtool: link: Fatal configuration error.
code....
I have install mysql on my fedora12. My different mysql server is located in us. I want to check health status and hits per seconds everything. Is it possible with mysql-administrator command.
now a these days i am connect through ssh and excuting below command
#mytop mysql -u root -p <passwd>
In my mysql db i have added the userip & passwd (allowed the privileages for that ip)
If i use mysql-administrator i am getting below error
MySQL Error Nr. 2003
Can't connect to MySQL server on '66.98.152.64' (111)
I have tried many different ways to interact with the mysql to reset the root mysql pass. This is what I got to right now
Code:
#!/bin/sh
newpass=$1
service mysqld stop
mysqld_safe --skip-grant-tables --skip-networking &
echo "use mysql;" >> /tmp/mysql_pass_reset.txt
echo "update user set password=PASSWORD("$newpass") where User="root";" >> /tmp/mysql_pass_reset.txt
[Code]...
I'm trying to setup wordpress on my server, which of course I need mysql for. I setup a database the other day, which worked perfectly, but I had to start again as I put some information in wrong. Now, I can create a database fine, but when I run
Code:
GRANT ALL ON wordpress.* TO wordpress@localhost IDENTIFIED BY "password";
I get the output:
[code]...
I'm trying to install snort-2.8.5.3 on centos5-i386 an I get this error from ./configure --with-mysql --enable-dynamicplugin command:
ERROR: unable to find mysql headers (mysql.h)
checked in the following places
/usr
/usr/include
[Code].....
I've read here it has to do with libmysqlclient12-dev. How can I install libmysqlclient12-dev on centOS?
Is it possible to install snort from repositories using yum?
