I'm trying to setup wordpress on my server, which of course I need mysql for. I setup a database the other day, which worked perfectly, but I had to start again as I put some information in wrong. Now, I can create a database fine, but when I run
Code:
GRANT ALL ON wordpress.* TO wordpress@localhost IDENTIFIED BY "password";
I get the output:
[code]...
I just installed a MySQL server but for unknown reason im not able to set a root password.
CentOS 5.4 - 2.6.18-164.9.1.el5PAE
MySQL Ver 14.12 Distrib 5.0.77, for redhat-linux-gnu (i686) using readline 5.1
# yum install -y mysql mysql-server php-mysql
# service mysqld start
# mysql -u root
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
We have a MyISAM table without .MYD and .MYI files for storing data and index but we can select data from the table. We can't use mysqlhotcopy for backup the table. Each time,we execute mysqlhotcopy, we have the following error: 'dbs.table: is not base table'. How do we repair the table to re-create .MYD and .MYI files?
View 2 Replies View RelatedI think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
i am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
I'm currently running a membership site which is Joomla-based. Basically I need a bash script to constantly check that MySQL users table and copy those credentials into my SSH users list (subsequently giving them SSH access).I've looked at pam_mysql, but that merely is for authentication, it doesnt add them to the SSH users.
View 3 Replies View RelatedI just purchased a new server and loaded it with Ubunut server 10. I installed apache2, php5, and mysql5. apache needs a little bit of configuration left (I need to tell it to accept index.php in addition to index.html), but other than that, all the php is working. MySQL is working as well, at least on the server. If I do a "show databases;", it shows all the databases properly. I loaded phpmyadmin on the server for testing, but I'll be removing it once everything works - this is my production server. phpMyAdmin can find all the tables, perform successful queries, and do everything I want it to, HOWEVER If I try to use the login page, I get the error mentioned in the title of this thread.
The database is a carbon copy from my development server, which works flawlessly. All the php and html pages are exactly as they are on the development server too, yet I still get that error. I've reloaded all pertinent programs (apparmor, apache2, and mysql). Apparmor was because I had to declare some new lines for mysql to access a different location for the DBs I resolved the "can't load InnoDB issue", but this one is stumping me.
I know PHP auto removes stale sessions on it's own, but that doesn't remove them from the MYSQL table. So I was gonna make a cron script that ran once every hour that removed any MYSQL shopping cart item from the table if the original session_id that created it does not exist anymore.
From my understanding a session_id is an "actual" file located somewhere on the harddisk (is it not? correct me if I'm wrong), so I was going to do a simple check for each item in the shopping cart to check for it's original session file, if it didn't exist on the harddisk, then simply remove it from the mysql table.
I have 2 servers, 1 running a web server on 1 IP address,the other server running a proxy on a different IP address. I intend to change and update the ncsa file with usernames and passwords from a mysql table.Is there a way to replicate 1 table from the webserver to the proxy server databases and then run a cronjob? The cron will simply delete unused usernames and add new ones.Is there a better way of doing this? I don't want to run the webserver on the proxy server for security and also for performance.
View 2 Replies View RelatedWhen a user logs into my webmail application, it creates entries in a table on MySQL called "identities" which works great however once the user is deleted fro Linux with the "userdel -r" command, the data still sits in MySQL. My question is how I can I remove the table data from old users? It appears as show below:
[code].....
How do I create a new mysql user and a mysql database at the shell prompt?
View 1 Replies View Relatedwe had a CENTOS 5.5 x86_64 machine with 8ered with MySQL 5.0.91-community.Currently we had a very high number of Created_tmp_disk_tables (31k in 4,5 hours!!!).I've read suggestion that we need to increase tmp_table_size, and we've set tmp_table_size to 64M, but this drupal modul's query still cause mysql create tmp table on disk
Code:
SELECT DISTINCT node.nid AS nid,
comments.subject AS comments_subject,
[code]...
Does anyone know how to write this command for mysql version 4? (The command is for mysql version 5, I guess since when I check database in mysql server version4 there is no database name information_schema ) command:select concat(table_schema,'.',table_name) as table_name,table_rows from information_schema.tables where table_rows > 1000000 order by table_rows desc; meaning:show all database,table name and row count from all databases that has table row more than 1000000
Run result with mysql version 5: mysql> select concat(table_schema,'.',table_name) as table_name,table_rows from information_schema.tables where table_rows > 1000000 order by table_rows desc;
[Code]....
Recently I got a very rare database issue, it says: Error: Couldn't read status information for table clients_copy () mysqldump: Couldn't execute 'show create table `clients_copy`': Table 'adm_retail.clients_copy' doesn't exist (1146) Error: Couldn't read status information for table dt_mx_emp ()
[Code]...
i was trying to do some maintenance on the database and i have the following problem when looking at the database with phpmyadmin on the site
Code:
Table Ation Records Type Collation Size Overhead
uc_order_products_pair_vw Browse Structure Search Insert Empty Drop ~01 View --- unknown -
uc_order_products_qty_vw Browse Structure Search Insert Empty Drop ~01 View --- unknown -
uc_order_products_user_vw Browse Structure Search Insert Empty Drop ~01 View --- unknown -
[Code].....
Kmail 1.13.2 Problem on startup, error is from nepomuk, data storage. "cannot find Redland backend, nepomuk is disabled until fixed. Also see the following error from the akonadi console:
100503 10:00:15 [Note] Plugin 'ndbcluster' is disabled.
100503 10:00:15 InnoDB: Started; log sequence number 0 31413862
100503 10:00:15 [Warning] Can't open and lock time zone table: Table
'mysql.time_zone_leap_second' doesn't exist trying to live without
[code]....
I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
I'm having problems connecting to the mysql database on my system. I first noticed this when I was trying to set up the program anymeal. I subsequently tried using MySQL Administrator (mysql-admin), but had no luck. It gives my the following feedback:
Code:
Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Click the 'Ping' button to see if there is a networking problem. I press the ping button, and it seems to connect.
Code:
I've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.
Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.
Howver, just been trying to again to fix the problems with downgrading mysql and get:-
Error: Package: mysql-server-5.1.55-1.fc14.i686 (@updates)
Requires: mysql(x86-32) = 5.1.55-1.fc14
Removing: mysql-5.1.55-1.fc14.i686 (@updates)
mysql(x86-32) = 5.1.55-1.fc14
I have MySQL 5.1.34 and PHP 5.1.6 installed on my system, how do I install php-mysql? Each time I try, it says
mysql-5.0.45-7.el5.i386 from base has depsolving problems
-- > mysql conflicts with mysql-server-community
error: mysql conflicts with mysql-server-community
I was having issues with MySQL Server and uninstalled it. I still have my databases at /lib/var/mysql.
My question: if I install MySQL Server (same version, 5.1) again, will it delete my databases, or will they still work?
How can I really, really remove everything related to mysql / mysql-server. I read and tried all kinds of things, but on every reinstall there is still old mysql stuff there, for example an existing password. Even resetting the password does not help.
Reason of removal: it looks like the mysql setup is really corrupt, so I want to remove, and then do a fresh install. Running Ubuntu 11.04 64-bit
sander@R540:~$ sudo apt-get purge mysql-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mysql-server is not installed,
[Code]....
I installed mediawiki the other day and went with the default innodb option. However a week later something went wrong. And since I have scripts that nightly backup /var/ I just copied the backup of /var/lib/mysql/wikidb/ (as I've done with MyISAM). Then when I connect the wikidb database. I can see the tables (via "show tables"), but when I do any query with them (check table X, select * from X) I get:
Code:
Table 'wikidb.X' doesn't exist I've since read that can can't just copy the database directory like MyISAM, and there appears to be no way that I can find to restore or fix Innodb, without a dump of the data. And I never got a chance to do a mysqldump of the data. So has anybody got any idea how I can at least view the "page" table from the files I've backed up in /var/lib/mysql/wikidb/ ?
I just configured a complete Cent OS 5.2 system for use as a web server. I can configure Apache and PHP but MySQl seems to be causing some issues -
[mysqld]
datadir=/var/lib/mysql
socket = /var/lib/mysql/mysql.sock
user=mysql
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
[Code]...
I have been reading about asterisk, I did some basic configuration, a small ivr, record messages.. but I was wondering how and what/where should I modify to use a database to save sip users and voicemail user..then we can add user/voicemail with php-myadmin I always search but I cant find about this configuration..
View 1 Replies View RelatedIs there any reason for the mysql user to need bash shell?
From /etc/passwd:
Code:
mysql:x:100:103:MySQL server:/var/lib/mysql:/bin/bash
Will anything break if I change that to /bin/false?
Might this is silly question but I am not much familiar to database.I am doing master slave Mysql replication for load balancing. On master server different database has different user privileges. I create backup using mysqldump command and restore on slave server instead of using load data from master; command.When i replicate database from master to slave will i require to set user privileges same as master ?One more question: How to lock all database in mysql?
View 2 Replies View RelatedI'm using an older redhat system (2.6.9-22.ELsmp) here which is running an older mysql (server version: 4.1.12). I don't think that's the source of the problems. I believe that have understood things rightly when I say that the mysql root user is unrelated to the linux root user ... in my case I believe the root user to be the unix user mysql. So when I connect to the server (local host from a local terminal) I use:
Code:
-bash-3.00$ mysql -u mysql -p
and enter a blank password
This gets me on, however I seem unable to do anything like create database or alter privilege. I wonder if its related to my finding no database called mysql?
-bash-3.00$ mysql -u mysql -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or g.
Your MySQL connection id is 11 to server version: 4.1.12
Type 'help;' or 'h' for help. Type 'c' to clear the buffer.
mysql> show databases;
+----------+
| Database |
+----------+
| test |
+----------+
1 row in set (0.00 sec)
Although I understand that show databases will not show things I have no priv to see. Does this mean my settings for the users are all screwed? How do I rectify this situation? Some other (perhaps) useful information.
Code:
[root ~]# cat /etc/my.cnf
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
old_passwords=1
[mysql.server]
user=mysql
basedir=/var/lib
[mysqld_safe]
err-log=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
So my BASEDIR seems to be nothing like is suggested in the documentation at [URL].
I'm using dovecot pop3 server in my website. I tried to create a virtual user system with mysql. But it didn't work. Next I tried to debug my work with reading of dovecot log. I enabled logging in it by changing this values in /etc/dovecot/conf.d/10-logging.conf:
Code:
log_path=/var/log/dov
auth_verbose = yes
auth_debug = yes
auth_debug_passwords = yes
After that I tried to login to the pop3 via telnet and it failed as usual. After I checked the log file (/var/log/dov), but it does not contain any information about that failed login. Only there was some information about starting up of dovecot! Does any body know that what is the problem and why dovecot doesn't log that?
I've tried every manual there is for creating new MySQL users ... but without success.
I keep getting
Code:
ERROR 1045 (28000): Access denied for user 'test'@'localhost' (using password: YES) even though I just created it with all privileges ... WITH a password that I DO remember .
Fortunately I still have access via the MySQL root user (so I try not to disturb that user, because I have had computers with THAT account not accessible as well - even WITH resetting the password via skip-grant-tables).