Slackware :: Postfix - Cyrus SASL Authentication - Pam-mysql - Mysql Database
May 10, 2011
Pam-mysql can not connect to the database and below are my configurations.
saslfinger -s Output:
root@mailbackup:/# saslfinger -s
saslfinger - postfix Cyrus sasl configuration Tue May 10 10:12:10 EAT 2011
version: 1.0.2
mode: server-side SMTP AUTH
-- basics --
Postfix: 2.7.2
System: Slackware 13.1.0
-- smtpd is linked to --libsasl2.so.2 => /usr/local/lib/libsasl2.so.2 (0x00007f74ebfb7000)
-- active SMTP AUTH and TLS parameters for smtpd --
-- listing of /usr/lib64/sasl2 --
-- listing of /usr/local/lib/sasl2 --
-- content of /usr/lib64/sasl2/smtpd.conf --
-- content of /usr/local/lib/sasl2/smtpd.conf --
-- active services in /etc/postfix/master.cf --
-- mechanisms on localhost --
View 3 Replies
ADVERTISEMENT
Jan 3, 2010
Slackware 13 64 - full installation
Postfix from slackbuilds dot org
Dovecot from same
has anyone recompiled Postfix using the Slackbuild script, modifying the script to include support for Cyrus-SASL, OpenLDAP, and MySQL in the build, while retaining Dovecot SASL and TLS? If so I would appreciate it if they could post the CCARGS and AUXLIBS commands. I am having some difficulty getting this working.
View 3 Replies
View Related
Mar 13, 2011
I for some reason can't get Cyrus-sasl to work completely. I have to manually start it via saslauthd -a show if I let it start up itself or do a service saslauthd start or restart testsaslauthd will fail. I need help getting this fixed. I tried setting /etc/sysconfig/saslauthd to shadow instead of Pam but still no luck. Also when I try to login my postfix server I get an error stating that my username or password is incorrect even though it is right and I can receive mail from dovecot.
View 2 Replies
View Related
Jun 16, 2011
I've setup a CentOS apache web server, and loaded a site onto it. The site previously was functioning under windows xp (before I "stepped in") and wamp. What I did was copy the site in /var/www, reconfigure the httpd.conf (DocumentRoot /var/www/site, etc). Although when I try to open the webpage I get this error: Database Error: Unable to connect to the database:The MySQL adapter "mysql" is not available.
[code]...
View 10 Replies
View Related
Jun 17, 2010
I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
View 1 Replies
View Related
Aug 25, 2010
I'm having problems connecting to the mysql database on my system. I first noticed this when I was trying to set up the program anymeal. I subsequently tried using MySQL Administrator (mysql-admin), but had no luck. It gives my the following feedback:
Code:
Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Click the 'Ping' button to see if there is a networking problem. I press the ping button, and it seems to connect.
Code:
View 4 Replies
View Related
Aug 7, 2010
How do I create a new mysql user and a mysql database at the shell prompt?
View 1 Replies
View Related
Apr 2, 2009
I have the latest LAMP running on F10 but need to do a database conversion from mysql 4.1.22 to mysql 5 for a client.
View 4 Replies
View Related
Mar 17, 2010
My problem is to get postfix working with a smarthost, to send mails from home with dynamic IP, and which needs authentication. I did exactly the same with Slackware 12.2 (postfix 2.6.2) and it worked. Now I tried to do with 2.6.2 (actual running version is 2.7.0 with the same problem) on Slackware 13 64bit. Following error message occurs around every minute in the maillog:
[code]...
View 2 Replies
View Related
Jun 19, 2011
Am unable to send mail from Outlook to my Postfix SMTP server.
Am getting the following in the /var/log/maillog.
Code:
Think I've pretty much followed the instructions correctly here.
[url]
Also, I looked for the PID of the smtpd and did a strace on it.
Code:
Code:
However, when I looked at the permission of this file, it should be accessible by everyone.
Code:
View 3 Replies
View Related
Nov 12, 2010
I'm using postfix with unix accounts for a while now and I just realized today that SASL authentication, instead of working only with the USERNAME, it also works if the username is followed by ANYDOMAIN.COM
So, let's say I have the following UNIX users: tim, mike, john. If I set the Outgoing Username:[URL]..(where whatever.com can be any name you can think of) IT WORKS, even though it shouldn't, it should only work with tim, mike and john without any domain name. Does anyone know what might cause this and what's the workaround to this problem?
View 3 Replies
View Related
Oct 14, 2010
I am running the following on CentOS 5.5 (Final)
dovecot 1.0.7
saslauthd 2.1.22
When I send an email via TLS I see the following log entries.
Code:
Oct 14 11:53:06 ns2 postfix/smtpd[11372]: connect from unknown[172.16.1.159]
Oct 14 11:53:06 ns2 postfix/smtpd[11372]: setting up TLS connection from unknown[172.16.1.159]
[Code]....
What I'm really curious about is there is an intial TLS connection with a 256 bit cipher, but then.. The last entry states "sasl_method=PLAIN" - so surely this is not encrypted? Or am I misunderstanding how it works?
View 2 Replies
View Related
Mar 15, 2011
I am re setting up a server of mine running red hat enterprise Linux server 6 and I had all of this working befor but for some reason I had troubles getting sasl to work and now when I login my smtp server I get an error stating that my username or password is incorrect though I am sure I am entering both correctly. Would anyone know what could be happening? I have been spending days on the web looking for the solution and only went from sasl not working when started as a service to this. For some reason I can't use Pam with saslauthd and had to use shadow instead of which from what I hear I get to use better methods of secure authentication with smtp
View 2 Replies
View Related
Apr 29, 2011
I am experiencing a Cyrus-SASL v2.1.23 and PAM authentication issue. I installed linux PAM 1.1.3 on slackware linux 13.1 x86 64bit. On installing cyrus, i am unable to find the PAM authentiaction mechanism.
root@xxxxx:/usr/local/src/cyrus-sasl-2.1.23# saslauthd -v
saslauthd 2.1.23
authentication mechanisms: getpwent rimap shadow ldap
[code]....
How can i get the PAM authentication mechanism runnning .
View 4 Replies
View Related
Jun 7, 2011
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
View 6 Replies
View Related
Aug 2, 2010
I have been faithfully following the postfix/sasl/etc install docs from [URL] and seem to have hit a minor snag with SASL authentication for SMTP. KMail cryptically leaves me with a generic auth fail notice and tailing the mail logs gives me
[Code]...
View 2 Replies
View Related
Jun 2, 2010
i am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
View 9 Replies
View Related
Apr 18, 2010
I am attempting to enable secure authentication on my homebrew AWS based mail server, by following the very excellent flurdy how-to.However I think the repositories I am attempting to use do not include this software.Oddly enough, an aptitude search finds the packages I want, however even if I copy-paste the name of the software into the install version of the command it turns up nothing.
Code:
root@cloud1:~# aptitude search sasl2-bin
i sasl2-bin - Cyrus SASL - administration programs for SASL users
[code]....
View 3 Replies
View Related
Aug 16, 2010
My existing MySQL database is running on 11.1. I plan to do a fresh install of 11.3 in order to utilize the trimming feature for SSD drives. How should I install my MySQL database to the new version? Do I perform a backup then restore to the new install? Or can I just save the mysql db files to a cd and somehow attach it to the new install?
View 2 Replies
View Related
Mar 25, 2010
Specifically I'm looking for a native Linux program that is similar in functionality to Navicat or SQLYog. I.e. I need something good at editing data. Free would be best, but not essential.
View 9 Replies
View Related
Jul 30, 2011
I recently installed a portable WAMP server on my usb stick. Really nice, I can do some php programming on my girlfriend's windows7 laptop without installing anything on it.I also have a LAMP environnement on my linux computer.When I plug my usb stick on my linux box, I can easily mount -o bind /usbstick/wwwfolder ~/public_html and work on my php script from there.
But my question is, is there a way I could get the database from my usb stick's MySql server, to run on my linux MySql server? So I can modify data base schema from my Linux workstation, doing some INSERTS in some tables, and then plub my usb stick on the laptop and get my up-to-date database running from the portable environnement?I don't know where / how MySql stores its databases. Basically, I want to "mount" the database from the usb stick in my Linux' installed MySql server, without extracting and importing the data, so there is just ONE database used for BOTH environnement.
View 3 Replies
View Related
Mar 24, 2010
I posted a thread regarding a CD Base Application. I can run the program, but for some reason It does not seem to work properly.
For some reason in exits the program back to the command prompt. I am using the code from Linux programming 4th edition which you can get it from here...and in the folder ch08/app you will find all you need to create the CD database application.
View 1 Replies
View Related
Nov 26, 2010
I am not having any knowledge of mysql database & in my present jobs i have to solve problem on mysql database. need some commands which are used regularily in database.
View 1 Replies
View Related
Mar 8, 2010
I want to migrate a mysql databases from a old server to a new server ( Redhat ) , can advise what I need to do ,is it just copy all .frm , .MYI & .MYD files to new server will do ? or I need to do export and inport data ?
View 12 Replies
View Related
Jun 27, 2011
How to backup a particular Databases..through Bash script! For example i have 6 databases;
Anish
linux
Software
Questions
Rhce
Google
these are the databases i have from that i want to take "Anish" and "questions" database backup regularly.
View 8 Replies
View Related
Sep 5, 2010
i need to update my mysql database from 5.0 for 5.1, i have several java application and php application running on that server, without disturbing the setup i need to upgrade the server can someone suggest a method of doing this
View 2 Replies
View Related
Jul 28, 2009
I tried creating a database in mysql but couldn't do so...here is the message i got from the shell:
Code:
View 4 Replies
View Related
Feb 21, 2011
I am having a problem restoring a database. Server is Ubuntu 8.04.4 LTS. It appears to wig out at a certain point, when this happens the output on the screen shows;Quote:
0,4),('2011-02-21 03:30:32','Queue Wait Outside (100)','Queue Wait Outside (100)',11,0,4),('2011-02-21 03:30:49','Queue Wait Sleep (30)','Queue Wait Sleep (30)',5,0,4),('2011-02-21 03:30:53','Queue Wait Sleep (30)','Queue Wait Sleep (30)',13,0,4)
[code]...
View 2 Replies
View Related
Feb 28, 2010
Well i have got a problem with connecting to a mysql database using php. I used this package "mysql-noinstall-5.1.44-win32.zip" and extracted it to c:mysql and added c:mysqlin to the PATH variable and used the following command in command prompt to start mysql: c:mysqlinmysqld --standalone
well mysql did start and everything went well accessing mysql in command prompt. Well under the database "mysql" in the table "user" i created a new user "php" with a password="****" and hostname = "localhost" but when i try to access this database with a following php routine:
And when i accesses it with my browser using localtost/test.php, all i get is "localhost" displayed on screen, "Connected to mysql" never gets displayed not i get any error..i am using windows 7(32-bit-ultimate)and mysql 5.1.44.
View 8 Replies
View Related
Jun 18, 2009
I am wondering whether it is problematic to let several different programs/php-scripts use the same MySQL-database concurrently, provided that they do not use the same tables?
View 5 Replies
View Related
