i was trying to allow remote access to mysql by following mysql was running perfectly until i got here :
Code:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
i changed my.cnf bind-address line to : "bind-address = 127.0.0.1" and nothing
[code]....
i have tried to follow some the tutorials on google to setup mysql for remote access however, cannot seem to do it. am i missing something.
i have edited /etc/mysql/my.cnf bind-address directive to a static ip address. then, i grant user@'%' access to database and restart mysql
after doing all that, when i try to remote access mysql i get "Access denied for user"
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
[Code]...
I am not sure if this is the correct forum to post this as I have usually been able to find the answers from other peoples threads.The error I receive is below.(changed "at" as can't post links)"#1045 - Access denied for user 'root' at 'localhost' (using password: NO)" Not entirely sure what has happened here. I have had this server running for a long time and today it seems to have spat it's dummy out!I have checked the config.inc.php and the controluser and controlpass are entered correctly so the error saying a password is not being usPHP Code:Thisis needed for cookie based authentication to encrypt password incookie
View 2 Replies View RelatedI have install mysql on my fedora12. My different mysql server is located in us. I want to check health status and hits per seconds everything. Is it possible with mysql-administrator command.
now a these days i am connect through ssh and excuting below command
#mytop mysql -u root -p <passwd>
In my mysql db i have added the userip & passwd (allowed the privileages for that ip)
If i use mysql-administrator i am getting below error
MySQL Error Nr. 2003
Can't connect to MySQL server on '66.98.152.64' (111)
I can not access my MySQL database from any remote host on my home network, I keep getting "Access denied for user 'dbuser'@'192.168.1.10' (using password: YES)"
From what I've read this seems to be a permission problem, I tried
'dbuser'@localhost';
'dbuser'@'%';
'dbuser'@'192.168.1.10';
and between each change of permission, I've flushed privileges.
I setup mysql v5 on centos, follow all the instruction i was able to google for to enable remote access, I am able to log in to -h localhost and -h (external IP address) from same server, I am able to telnet to 3306 using localhost and external ip address, BUT when I try to connect from deferent server i get host unreachable error H3000 (113) and telnet also is not able to connect via port 3306 I covered all the bases but stii no luck. same setup works for slackware no problem and there is no issue with client.
View 1 Replies View RelatedI have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
I set up a servber on my local machine, & also PHp - Both working fine.I'm trying to load up MYSQL i have installed it, & *can* start/stop the server. however if I do anything else with it, I get this error :-
Quote:
root@gordon-desktop:~# sudo mysqladmin -u root -h localhost password MYPASSWORD
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)'
Query :-
1) How do I know MYSQL is actually active ? (apart from the message it says that its statrted (or stopped).
2) Is there a way to
a) Find out the usernames that are recorded on the MYSQL server ?
b) set / RESET the 'root' username (I know MYSQL root user is different to PC root user)
c) anything else I can do on the PHP / website code to see if MYSQL is working
(as yet, no tables / databases etc have been set up - as I can't get past this error message - I get the same error when setting up a database.)
Ps I did allow my usermname (when logged in to ubuntu) to edit / create files in the /usr/www/ directory (but it is still OWNED by 'root' - that directory)
I'm using slackware 13.1 and I have a problem to accept remote access to mysql server.The steps I have followed to do that thing are:vi /etc/my.cnfline skip-networking is commented
bind-address my_ipaddressI opened the port 3306 of my firewallAlthough I can connect locally, i.e. mysql -u a_user -h localhost -pI can't do it remotely i.e. mysql -u same_user -h my_ipaddress -pI have also turned off my firewall, but nothing.telent 3306 my_ipaddress results in: telnet: connect to address my_ipaddress: Connection refusedMy my.cnf file is:
Code:
[client]
port= 3306
[code]....
I have a question in regards to enabling root remote access to the server.I am trying to use the mysql workbenchit kicks back an error saying "Access denied for user 'root'@'10.x.x.x' (using password: YES)" But I am able to login locally on the server.How do I enable root to long on remotely from any workstation?
View 3 Replies View RelatedI have yum installed mysql 5 on Centos5 and I can successfully run queries through shell.However, I want to now allow external access to mysql via some mysql tools (Mysql Administrator/Mysql Query Browser) which is on some windows machines on the same network.Mysql is running on port 3006.When i try connecting through mysql Admin i get the following:Could not connect to the specified instance.MySQL Error Number 2003Can't connect to MySQL server on 'ipaddress' (10065)If you want to check the network connection, please click the Ping button.Googling this I get the impression its something port related, but I have tried what I have found and still no go.When I ping the server I get:
Start Pinging:
Reply from ipaddress: Time=0ms TTL=64
Reply from ipaddress: Time=0ms TTL=64
[code]....
Enable remote access to MySQL database server I used the link above to enable remote access to mysql for a specific user. But when I try to telnet 3306 or user mysqladmin to connect, both just hang there. Using mysql 5.0 on opensuse 11.1
View 1 Replies View RelatedI have a server machine that is running SUSE Linux Enterprise Server 11. I set up a mysql server there. Now I want to access this mysql server from my laptop. I used the following command,
> mysql -h 12.246.5.70 -u davidehs -p
I found if the firewall on the server machine is running, I can not connect the mysql server from my laptop. If I stop the firewall first, and the do the connection, I can access the mysql. how to keep the firewall running and allow the remote mysql incoming requests?
I have a server machine that is running SUSE Linux Enterprise Server 11. I set up a mysql server there. Now I want to access this mysql server from my laptop. I used the following command,
> mysql -h 12.246.5.70 -u davidehs -p
I found if the firewall on the server machine is running, I can not connect the mysql server from my laptop. If I stop the firewall first, and the do the connection, I can access the mysql. Do you guys have any idea how to keep the firewall running and allow the remote mysql incoming requests?
getting foll error during 'make' part of compilation of mysql v5.5.6rc
Code:
libtool: link: unsupported hardcode properties
libtool: link: See the libtool documentation for more information.
libtool: link: Fatal configuration error.
code....
I've downloaded and installed MySQL-client-5.1.53-1.glibc23.x86_64.rpm. I'm rather new to linux so it might be I haven't started the server. Unfortunately I have no idea which file is responsible for that. It is also possible that my head isn't functioning correctly ( if at all ).
Error I receive is:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
I've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.
Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.
Howver, just been trying to again to fix the problems with downgrading mysql and get:-
Error: Package: mysql-server-5.1.55-1.fc14.i686 (@updates)
Requires: mysql(x86-32) = 5.1.55-1.fc14
Removing: mysql-5.1.55-1.fc14.i686 (@updates)
mysql(x86-32) = 5.1.55-1.fc14
I have mysql downloaded and when I type mysql into the command line I get this:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111)
I'm trying to install snort-2.8.5.3 on centos5-i386 an I get this error from ./configure --with-mysql --enable-dynamicplugin command:
ERROR: unable to find mysql headers (mysql.h)
checked in the following places
/usr
/usr/include
[Code].....
I've read here it has to do with libmysqlclient12-dev. How can I install libmysqlclient12-dev on centOS?
Is it possible to install snort from repositories using yum?
I have MySQL 5.1.34 and PHP 5.1.6 installed on my system, how do I install php-mysql? Each time I try, it says
mysql-5.0.45-7.el5.i386 from base has depsolving problems
-- > mysql conflicts with mysql-server-community
error: mysql conflicts with mysql-server-community
i am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
I just configured a complete Cent OS 5.2 system for use as a web server. I can configure Apache and PHP but MySQl seems to be causing some issues -
[mysqld]
datadir=/var/lib/mysql
socket = /var/lib/mysql/mysql.sock
user=mysql
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
[Code]...
I set up mod_proxy in order to get rid of :8080 now I cant access phpmyadmin through the browser. what is the quickest way to turn off mod_proxy and access phpmyadmin? I would like to optimize the tables and back up the sql file. I just need to turn it on for a bit, and then enable mod_proxy again.Right now, if I got to localhost/phpmyadmin, it redirects to the main application.
I have used a2enmod, and added
sudo a2enmod proxy
sudo a2enmod proxy_http
sudo a2enmod proxy_ajp
[Code]...
When you access mysql within the same Apache server (same ip address) via php, do you need to GRANT user ip in order to login to mysql?
Where are the log files for php, mysql etc?
I'm running an Ubuntu 9.04 Minimal server and trying to get MySQL to work correctly. But when I try to access MySQL with the root user it doesn't want to.
Code:
mysql -u root -p
Enter password:
[code]....
I erased Windows a week ago and is loving Ubuntu 10.04 (which changed to xubuntu after installing Qimo for Kids??) ever since. Now I want to get coding again and PHP is working fine, but I can't access mysql!?I followed a ton of guides, completely removed, reinstalled etc. Nothing works.Here some stuff that might be interresting. I can't remember the "ls" and "awk" and "grep" commands to use, so please guide me if you need more info.
sudo mysql status
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
sudo update-rc.d mysql defaults
update-rc.d: warning: /etc/init.d/mysql missing LSB information
[code]...
We started our project (it's a website "employee performance appraisal system") in windows by starting with some html forms and then slowlyadded php ,javascript and other stuff in windows we had no issues of insertion and retrieval of data from thedatabase.Now,we decided to shift the entire stuff to drupal the html forms along with those php files but we had 2 issues with this1. the first one was ..we created "page" for each html form and copied the html code into "page" but we didn't find where our pages are getting stored (do they get stored in mysql database that we create for drupal siter do they remain as html pages somwhere?)2.second problem was ...for admin in drupal I gave the username "root" and a password ..similarly for mysql also I gave a password.
now I used phpmyadmin and created another database called "appraisal" which is supposed to hold the data of our website.when I try to insert data into one of the tables of this database (attendance table) ,the following error occured "Attempt to connect failed access denied for user 'root'@'localhost'(using password:NO) cannot run querry insert intoattendance values('x','y')" Access denied for user 'root'@'localhost' (usingpassword:NO)Also I'm unable to access mysql as a normal user only super user can access and can we unset the password that's required to reach mysqlprompt?
One server is a dedicated MySQL server. After upgrading that one to Ubuntu 10.04 (from an ancient Suse 9.2), both servers are running Ubuntu 10.04 LTS.I have another server that I use to administer the database server via phpMyAdmin. However since the upgrade it is not able to connect. I get an error #1130 Cannot log in to the MySQL server. The same happens if I try to connect remotely from the command line with: mysql -u root -h 129.79.137.121 -pI'm not sure if this is an iptables/ports problem or a configuration problem on the MySQL end or something else entirely.I've searched and tried the suggestions I've found in various places but none seems to have fixed it.
View 2 Replies View Related