For some reason, my latest Fedora 11 install + yum update does not seem to have the option to connect to a Windows Share in the drop down list when I select Connect to Share. I'm using gnome.Does anyone have any ideas which packages provide this functionality.
View 2 Repliesif i try to connect to my samba server ( share ) from my windows xp ( or vista, i've tried both ) it says, that the network share cannot be found. i've installed all necessary rpms on my fedora 10, necessary for running a samba server:
Quote:
[root@********* samba]# rpm -qa |grep samba
samba-common-3.2.8-0.27.fc10.i386
samba-3.2.8-0.27.fc10.i386
samba-winbind-3.2.8-0.27.fc10.i386
after that, i've configured the smb.conf file, as follows:
Quote:
[root@*********** samba]# cat /etc/samba/smb.conf
#======================= Global Settings =====================================
[global]
# ----------------------- Netwrok Related Options -------------------------
workgroup = GROUP
[code]....
there is no iptables definition, or any other firewall installed, neither on the server nor the client. i've read through alot of howtos an manuals, but was not able to find the problem.
I have just installed XBMC (yum install xbmc) and noticed that the option where you can control it via the HTTP protocol is gone. Just as a curiosity I have installed it on my windows machine and the http server option is there. Does anyone knows what you have to do to fix this?
View 1 Replies View RelatedI'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
I'm running Fedora 13 on my laptop and am trying to share out a folder from a Win7 computer. Folder on Win7 machine is set to allow access to everyone.In Fedora, I have SELinux disable, I've made sure samba is allowed in the firewall, and that the smb service is running. There's no password on the Win7 computer, so in the Windows Share setting on Fedora I just put the username and left the pass field blank.
I've seen some things say all you have to do is go the the "Network" place...but somehow that seems to have become non-existent and I don't know how to get it back.Also, trying to connect to smb://WinShare/Share results in it saying that the server has timed out.
Trying to setup Samba for the first time and am unable to connect to the share from my Windows machine. It is a very basic setup, just trying to setup a single share to use a backup location for my windows files.
I've done the following:
1. Fresh install if fedora 15
2. installed samba
rpm -qa | grep samba
gives the following:
[Code].....
3. Used samba server configuration to setup the share and create the samba users
4. When I tried to connect from my windows machine I get the error that the server is not accessible, you might not have permission to use this network resource or I get the error "windows cannot access server, check spelling and try again.
Both computers can ping each other. I opened samba ports in the linux firewall and tried to connect again: same error Disabled firewall all together and have the same error. Here is the output from the testparm command
[Code].....
Was already having Windows 7 and ubuntu 10.10 and i installed ubuntu 11.04 with removable drive. Unfortunately, my windows 7 boot option is no more in menu. how my menu.lst looks like..
[Code]...
I recently installed Ubuntu 10.10 on my desktop which also have windows xp installed. After the installation I could boot to both Ubuntu and Windows. I then installed some updates from the update manager in Ubuntu 10.10 and after this the windows option in the grub boot menu is gone. The boot_info_script055.sh returned the following result
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for (,msdos5)/boot/grub.
=> Windows is installed in the MBR of /dev/sdb
[code]....
I was using Win Xp ,and i installed Ubuntu ,I used to get an option to select windows or Ubuntu before,I formatted Windows and now am not able to find the grub menu where iI could select Ubuntu,.How to get the grub enabled?
View 3 Replies View Relatedjust recently, while attempting to boot to windows 7, i happened to select the wrong boot option by mistake, that is the windows 7 recovery (something like that, cant remember it specifically, but the word 'recovery' is there). the option has been there eversince i installed ubuntu 11.04 on my system, of which i cant find the answer as to why it existed there. so once i selected it (which was by mistake), it took me into some recovery process which i abandoned as quickly. it restarted and the windows 7 option was no longer there. the windows 7 recovery option, however, is still there. How to get my windows 7 boot option back?
View 9 Replies View RelatedI have downloaded Kubuntu 11.04 Desktop ISO. When I fire up Wubi then there is no Install inside Windows option! Why?
View 4 Replies View RelatedI have a netbook running Fedora 12 and I cannot for the life of me figure out how to get it to connect to my WHS. For my netbook its not that big of a deal, but what I really need it for is my soon to be music computer. It will be running F13, and mainly be for playing music stored on my WHS. how to get to my WHS shares?
View 1 Replies View RelatedI'm testing out 10.04 on one of my partitions, and I love it. I have been using it exclusively for a while now, I have not logged into Windows since! Really don't care about windows anymore!However, yesterday I went to boot into windows... and I noticed the option to choose it is missing from my list! Maybe I'm just not getting to the correct list? The list I get shows like 5 different modes and versions of Ubuntu and something called Windows Recovery (which does nothing), but that's it.
View 9 Replies View RelatedI'm trying to mount a Windows Server 2003 share in Fedora 13. With Fedora 8 and with RHEL 5.5 this works properly, but not with Fedora 13.
The mount point I'm using is /usr/eg
The symptoms are: Nautilus (the file browser) does not display the mount in the places or tree as a mounted drive. Using the file broser I can browse under file system down to the files on the server Programs cannot find the files under /usr/eg ie the files on the server.
Here is my fstab entry:
//192.168.1.40/eg /usr/eg cifs auto,user=<user>,password=<password>,rw,uid=500,gid=500,file_mode=0774._netdev 0 0
I want to connect my linux distro to a windows file share on a networked computer.
View 1 Replies View RelatedRecently after updating my Debian Jessie, I can no longer access windows shares. I can access those shares from windows PC. And to be able from debian.
After I enter my password of windows share, the password dialog box pops up again. No warning, no errors. It just pops up. I cannot connect to any windows share.
My laptop has Ubuntu 9.10. It can connect to shares on my XP and Vista computers without issue, but cannot connect to a share on my Windows 7 system. I'm using "Connect to Server" and have tried by both Computer name and IP address. When I click connect, it prompts me for User ID, workgroup and password, however when I enter them, the same prompt comes back a few seconds later and is blank. I don't receive any errors, it just won't connect.My XP and Vista systems can connect to the Windows 7 share, just not the Ubuntu system
View 9 Replies View RelatedI cannot connect to a share on Windows XP machine, because it rejects my password. I'm using correct username and password. When running from console, smbclient's error message is: session setup failed: NT_STATUS_LOGON_FAILURE I can connect to said share from other Windows machine.
View 9 Replies View RelatedI am setting up samba on my CentOS server for the first time. I am using webmin to configure samba. Here is the smb.conf
Code:
[global]
netbios name = KISKA
cups options = raw
load printers = yes
server string =
[code]...
I can see the domain name "KISKA" in the "network" tab of windows explorer, however when I click on it I get this error: Windows cannot access \KISKA check the spelling of the name. otherwise there might be a problem with your network. Under the details of this error I get this: "The network path was not found" Also I have stopped iptables so it cant be firewalled
I am attempting to share a folder from an existing drive that has been formatted in NTFS. I simply right click on the folder, goto share, and I can see the option to share to UNIX and that works with no problems. My question is; why is the SAMBA sharing dialog grayed out?
View 1 Replies View RelatedThe file share option is greyed out in Empathy. I also don't get any notification when a file is sent to me, but I am notified when a file transfer has been canceled. Any ideas as to why I can't transfer files?
View 2 Replies View RelatedI'm wondering if I can get an answer to this oneI'm pretty new to Ubuntu, been using it off and on for a few months now. Right now I'm using Lucid and I have no problem connecting to the other PC's in my house that run Windows 7, however when I try to access them it asks for a password. I disabled the password on the Windows PC, so is it possible to get into them without a pass? If so, how
View 3 Replies View RelatedI have shared my cpl-300 from my windows 7 machine to my network, so that may print from my linux laptop to it.
Now whenever I go to system -> Administration -> Printing and try and browse for my printer it asks for a username and password any username or password I enter that is on the windows 7 machine gets rejected.
So I tested to see what would happen if you used smbclient to view the shares available from the windows 7 machine, unfortunately it results in another permission error. The funny thing is I can mount a share using "mount -t cifs".
I am having difficulty connecting to a PC that runs Windows 7 (and suffice it to say Windows XP as well). I go to Places > Connect to Server and choose Windows share from the drop-down list. I enter in the computer's IP address in the Server field and click Connect, when I'm brought to the "Password required for x" screen (x being the IP address). I enter my username for the Windows machine, leave the Domain field as is (it is WORKGROUP by default, which is the Workgroup name for both PCs), and then I enter my Windows password. The dialog keeps popping up as if I entered incorrect credentials. I do want to point out, on the dialog, it asks for a Domain name. Since I do not have this computer connected to a domain (I'm at home), it is a workgroup network. However, prior to Ubuntu 10.10, I was able to use this method to connect to Windows computers.
View 9 Replies View Relatedi've been trying for the last 2 days (onoff) to setup a simple samba share to connect to my windows 7 box
[Code]....
My friend is trying to share his clearwire connection with me using Windows ICS. Using network-manager or wicd, I am unable to connect to his share. I am able to connect unencrypted with iwconfig, to the ad-hoc network, and then use dhclient to gain ip address.
I am not able to connect to WPA encrypted share using network-manager or wicd. nm-applet crashes when trying to connect. I am attempting to setup wpa_supplicant, but haven't got it working yet.As usual, the wireless networking out of the box experience in Ubuntu doesn't work. This is extremely frustrating. If Ubunut's goals are to be the default desktop, then these guys need to get wifi that "Just Works"...
I try to connect my Debian Jessie to my Windows share
This is what I have done:
-> 1 - create an .smbcredentials file located in my /home directory (with account / password and domain)
-> 2 - implement /etc/fstab with information like that :
//192.168.x.x/Animes/media/Animes cifs uid=toto,dir_mode=0777,file_mode=0777,credentials=/home/.smbcredentials,iocharset=utf800
and when I try to go on my windows share, I have this message:
An error occurred while accessing 'Home', the system responded: mount: only root can mount //192.168.x.x/Audio-Video-01 on /media/Audio-Video-01
I think about one thing, if uid=toto is different in fstab than my current debian account session name, it is possible the problem came because of that?
(fstab, uid=toto and current session titi)
I'm running Lucid and and trying to get Samba set up to allow sharing files on my network. My problem is that my Windows laptop (Win7) can't see the Linux PC when I click on Network. It only shows my own laptop and my roommate's Vista laptop. However, if I manually connect to the computer (\serenity) it works just fine.
Right now I'm simply using the smb.conf that comes with the package and adding my share info.
The relevant section is:
Code:
I've setup a samba server on a centos 5 machine and am trying to connect to it via a windows 7. The problem I'm encountering is that the only share I am able to connect to is the tmp share. It doesn't matter if it is a protected share or not, I always get a "network path could not be found error" when trying to open the share from windows.
View 5 Replies View RelatedFairly new Linux user, running Fedora 12, attempting to set up a simple Samba share to share files with a Windows box. I've gotten to the point where I can connect from the Windows box, and see a home directory and the directory I'm trying to share. The home directory is accessible and works as expected, but when I try to access the other directory I get "The network path could not be found."
View 5 Replies View Related