Fedora :: Kernel Boot Error After Yum Update F13 / Fix It?
Aug 4, 2010
I ran the update through yum (replicated results twice) and whenever I boot to the new kernel it either freezes on the F logo or screen goes black right after f logo. No commands work whatsoever (tried em all). I can boot to an older kernel (2.6.33.3-85.fc13.x86_64). the ones that fail are: 2.6.33.6-147.fc13.x86_64 and 2.6.33.6-147.2.4.fc13.x86_64.
The Fedora error system gave me a bug report I submitted, here's what I got:
Package: kernel
Latest Crash:Tue 03 Aug 2010 09:46:33 PM
Command: not_applicable
Reason: BUG: unable to handle kernel NULL pointer dereference at 00000000000005b8
Bug Reports:Kernel oops report was uploaded
View 14 Replies
ADVERTISEMENT
May 13, 2011
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies
View Related
Jul 14, 2009
I just updated my kernel to kernel-2.6.29.5-191.fc11.x86_64 on my x64 system, after I reboot my machine, the Fedora loading bar comes up and finishes but then no gui comes up. I attempt to issue commands at the hanging prompt that comes up but nothing happens. I can boot into my older kernel just fine but not the updated one.
What can I do?
View 3 Replies
View Related
Aug 10, 2009
The girlfriend did an update a few nights ago. Besides removing her NVidia drivers, it also installed kernel version 2.6.27.29-170.2.78.fc10.i686.
That kernel was causing problems. Now it won't boot at all. How do we remove that kernel altogether?
If we remove it, would simply doing another update from the previous (still working) kernel just try to reinstall that bad kernel?
View 12 Replies
View Related
Jan 21, 2010
I've run today command: "sudo yum update"
and I've noticed that the new kermel have been installed (2.6.31.12-174.2.3.fc12.x86_64).
After that installation .. my camputer has several errors while booting and it doesn't want to start. So while booting I can see Code...
View 7 Replies
View Related
Nov 15, 2010
After updating my kernel from 2.6.34.7-56.fc13.i686 to 2.6.34.7-61.fc13.i686 I can't boot anymore. The error message says: "No root device found Boot has failed, sleeping forever."
I'm booting from 2.6.34.7-56.fc13.i686 now but I would like to sort this thing out. What should I do? File a bug? I never did that, so I don't know where to go.
View 5 Replies
View Related
Dec 19, 2010
After running update last night from 2.6.35.9-64 to 2.6.35.10-68 my laptop fails to start. Boot process goes most of the way to startup and then hangs just before login screen. Not sure what else to give as far as info.
View 12 Replies
View Related
Aug 23, 2009
I have recently updated my Fedora 11 installation which replaced my older 167 kernel with the newer 217 kernel. However, the 217 kernel will not boot completely. It will show the splash loading screen, and then will switch to a rapidly blinking cursor. This cursor blinks for about 5 seconds and then disappears. I can access terminals using ALT+F2, etc. I can log in to these terminals, but init commands do not complete (something about a binary handler). I'm not sure if something is conflicting with an update to X or what is wrong. The most recent kernel that I managed to get to work was Kernel 167, however I cannot find this kernel for download.
Sys info:
AMD Athlon 64 X2 4800+
3GB RAM
nVidia GeForce 8600GT with proprietary drivers
320GB Hard Disk with windows and linux partitions
Fedora 11 32-bit i586
View 2 Replies
View Related
Dec 1, 2009
I tried to update my f12 today. In the list it showed an update for kernel-2.6.31.6-145.fc12.x86_64 It all seemed to go OK but when I restated my computer it spit up an error and wouldn't boot"Could not load /lib/modules/2.6.31.6-145.f12.x86_64/modules.dep: No such file or directory"Luckily the old kernel still works.
I do have the disk encryption set, could this be related to that? Updated my laptop today with the xx.6-145.f12.PAE kernel and now it's borked to. Same problems.12/07/2009OK today's kernel update seemedto fix the problems and now all is well, execpt for my inkscape not working problem. But I put ubuntu 9.10 in a VBox and it works. So for now that's my work around.
View 14 Replies
View Related
Feb 11, 2011
I am unable to boot my Fedora 14 after last nights kernel update. When I start the boot up and hit F2 the system fails after outputting the line : Starting vservers of type 'default'. At some point the console displays an error message :
serial8250 : Too much work for irq17
How do I restore my previous version? I know some people have suggested in the past - just modify the grub.conf but how? When I boot off the cd I only get access to the liveuser disk. I need to have access to my own /boot/grub/grub.conf file.
View 14 Replies
View Related
Apr 12, 2011
Hello, i recently update the kernel in fedora through the GUI update manager and after restarting the new kernel wouldn't boot and i had to reboot into the old one. it freezes right after Plymouth finishes and the login screen should show up it just completely freezes, i do have proprietary nvidia drivers could it be that?
View 9 Replies
View Related
Jun 16, 2011
I upgraded the kernel of my machine with a yum update, and now it will not boot. I am running Fedora 14 on a 64 bit machine. I really really need it to boot. Help!
I did Ctrl+Alt+F2 and managed to log in. I have kernel x86_64 2.6.35.12-90.fc14 installed. How do I log in as usual? I never get to a login screen.
View 4 Replies
View Related
Jul 12, 2011
I have just updated my kernel to version 2.6.38.8-35 in Fedora 15, it now refuses to boot that kernel. I just get a lot of text on the screen and nothing happens. I can ctrl-alt-fn to get to a prompt, but I do not know how to fix the nvidia problem.
When I edit Xorg.conf and replace 'nvidia' with 'nv' the new kernel boots but only to fallback mode, trying to then re-install the nvidia drivers shows them to be already installed and I can get no further.
View 13 Replies
View Related
Mar 14, 2010
Dual Boot: Fedora 12 and XP Dell 505I've had trouble with the latest kernel update.I updated a bunch of packages recently (including Xorg and kernel), and noticed a severe flickering after the update on my center monitor (Samsung T260 - the laptop display did not exhibit the flickering behavior). I backed out all the changes and started updating package by package. After I updated the kernel (again) I rebooted and here's where the fun part is -
I no longer get anything, except the cursor. No grub menu, no grub prompt. I rebooted and ran the rescue disk and followed the procedurery and point grub at the right boot partition - see here. However (obviously or I wouldn't be posting) that failed to work. I still get a blinking cursor and dead system on boot up.
View 9 Replies
View Related
Jul 10, 2010
Googled this and found the same problem mentioned in the yum site:
[root@plouton ~]# yum update kernel
Loaded plugins: refresh-packagekit
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package kernel.x86_64 0:2.6.33.6-147.fc13 set to be installed
--> Finished Dependency Resolution
--> Running transaction check
---> Package kernel.x86_64 0:2.6.33.4-95.fc13 set to be erased
--> Finished Dependency Resolution
Dependencies Resolved
View 4 Replies
View Related
Nov 26, 2009
It appears that I have really messed up my machine. I was trying to get matlab working on FC 11 and I ran into libc.so.6 issues, so I put an older file libc.2.3.1.so in /lib/tls/ directory and created a symbolic link libc.so.6 to see if the application would work. Unfortunately at the same time the system did some updates and the system hung, so I ended up rebooting, but now it gets stuck at boot screen (after grub) with a kernel panic - not syncing: attempted to kill init.I just need a way to get to the directror /lib/tls and delete the link and the older .so file I threw in there. How do I get this accomplished. I cannot get even to a shell from the boot screen.
View 3 Replies
View Related
Jul 19, 2010
Since doing the update which included kernel "2.6.32.16-141 fc12-i686 PAE" I can no longer boot into my usual 1280x960 desktop. I can set it using NVidia settings but even though this offers to modify xorg.conf it fails to do so. I have tried running as root and it doesn't then give an error message but when I look at xorg. conf there is no section.showing any specific screen size. It worked ok before the update. In case it is relevant the video card is a Quadro FX1400 with KDE. Also the whole program seems rather unstable since the update.
View 10 Replies
View Related
Sep 4, 2010
I have a problem with the kernel update to 2.6.34.6. Up until 2.6.33.x my system boots fine, but with this update the boot stops at the moment that the mouse cursor should become visible. To resolve the problem, I've gone back to 2.6.33.x and removed the 2.6.34 kernel but I wonder what happens with the next kernel update.
Anyone else having this problem?
View 8 Replies
View Related
Mar 24, 2010
I'm not sure what caused it, but it happened right after running 'yum update'. It may be because it installed a new kernel, and there are now two kernels listed in my grub.conf and at boot; 2.6.31 and 2.6.32. System boots through a list of things it's starting up and stalls out at ATL or ADL or ADM maybe. It hangs there for a minute or so then flickers. This happens every time at boot. It's a bit difficult to post more information since I can't get past that part of the boot process, and I can't seem to be able to skip it either. It may be worth mentioning that this is a mini-itx motherboard. Intel Atom 330 1.6, 2GB DDR2, onboard GeForce 9400m. It's a zotac ionitx-a-u. I've installed a fresh copy of Fedora 12 lxde.
View 3 Replies
View Related
Feb 23, 2010
Finally updates are broken - I've been able to use my upgraded F12 system for some time, faithfully keeping up with f10, then f11. Just yesterday it finally broke:
Test Transaction Errors: installing package kernel-2.6.31.12-174.2.22.fc12.i686 needs 10MB on the /boot filesystem
It would appear that the most recent kernel update has broken the 10MB barrier initially set by the version I first installed (for the boot partition). Needless to say, I have quite an investment in this machine, and of course no time to back it all up and do a fresh F12 install. I am hoping someone out there can give me a bulletproof way to steal some space and expand the boot partition...
View 4 Replies
View Related
Aug 6, 2011
I have a Dell Vostro 3500, which has a Broadcom wifi card. It requires non free drivers. So far it has been working well. However, after updating the kernel (via yum update), my wifi card (it used to be eth1) is totally gone: $ ifconfig eth1 eth1: error fetching interface information: Device not found The wireless indicator does not light up either. The kernel version is
[code]...
View 3 Replies
View Related
Nov 19, 2009
I am using Centos 5 with an old kernel. I want to build the latest version for atheros 5K wireless drivers. So i downloaded, and compiled with the ".config" which is already in /boot , and made it ready to run.
However, whenever i try to boot with new kernel, after choosing it from the grub menu, i got the following error. I tried many many .config files but the result was the same.
Here is the screen capture of the error;
I'm trying this process for a week without any success...
View 5 Replies
View Related
Dec 31, 2008
I have the following strange thing with a RHEL4 installation. Since last week, the system did a reboot and now something is really fucked up. During boot we get the following messages (don't care about 'strange' typo's, my colleague typed it 'blind' from the screen)
Code:
The strange thing is that we never see a 'could not mount blabla' or similar messages. First we thought it was a failing kernel update by plesk, but even after manually updating the kernel with RHN RPM's, still the same message. Booting with rescue mode and then chroot the system works. After that we even can start things like plesk and so on.
We double checked things with another RHEL4 install, and at least two things were odd:
1: the working machine has /dev/dm-0 and /dev/dm-1, the broken one doesn't
2: some files on /dev didn't have group root, but 252
We tried to recreate the /dev/dm-X nodes with [vgmknodes -v], output:
Code:
A fdisk /dev/sda shows: /dev/sda2 XX XXX XXXXX Linux LVM (I removed the numbers because this line is from another machine, but rest was identical)
We have a copy of the boot partition so if one need more info please let me know.
grub.conf:
Code:
last part of init extracted from initrd-2.6.9-78.0.8.ELsmp.img:
Code:
View 3 Replies
View Related
Mar 27, 2011
I Installed Fedora 14 about 2 weeks ago and was just settling into using it more or les permanantly and had to turn of the power to do some maintenanace. When I rebooted I got the grub> prompt. As I have already shut down and rebooted several times over the last couple of weeks, I could not se why this happened, so I rebooted and stiull got the same problem. Things I have tried:
[code]...
I am currently using a 64 bit ASUS P75P55-M motherboard.
View 1 Replies
View Related
Sep 1, 2011
(after i update packages, it says error, and here's whats in the details tab)
Preconfiguring packages ...
(Reading database ... 197969 files and directories currently installed.)
Preparing to replace flashplugin-installer 10.3.181.34ubuntu0.11.04.1 (using .../flashplugin-installer_10.3.181.34ubuntu0.11.04.1_i386.deb) ...
code....
How to fix This? i haven't messed with Ubuntu much...Why am i getting an error about a kernel update?
View 4 Replies
View Related
Jan 7, 2010
I just installed Fedora 12. When I boot, only the following three lines are printed: pnp 00:09: can't evaluate _CRS: 12298 ACPI: Expecting a [Reference] package element, found type 0 Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) I first installed Fedora using a RAID 1 setup that mirrored each partition, so I thought the problem was coming from GRUB and confusion from what to boot off of. However, I reinstalled Fedora using a simple single drive setup (left the second drive without any partition), and the same error was returned. Is this an ACPI issue with this particular motherboard/BIOS? Any ideas for how I can fix this?
View 1 Replies
View Related
Jan 21, 2010
I did the "yum update" today, the process was doing well but, the follow error appears:
Transaction Check Error:
installing package kernel-PAEdebug-2.6.31.12-174.2.3.fc12.i686 needs 9MB on the /boot filesystem
Look:
Code:
Transaction Summary
==================================
Install 10 Package(s)
Upgrade 33 Package(s)
Remove 1 Package(s)
[code]....
View 6 Replies
View Related
May 2, 2015
After some updates Jessie 8 my boot grub shows now 2 kernel versions to boot from.
3.16.0-4-amd64
3.16-3-amd64
- How do I know which one is the newest and if happy with it, how to remove the older one?
View 9 Replies
View Related
Jul 23, 2009
I have downloaded the i386-DVD.iso image and have burned it on a DVD using Nero Express 6, when it boots from the DVD, it give me an error message "Could not find kernel image: Linux" and the boot: prompt after that. I have burned another DVD using Infra Recorder with minimum write speed but with the same problem. I have Ubuntu already installed on the computer.
View 8 Replies
View Related
Jul 18, 2010
From F12 to F13. Is there anything I should remove before updating? I have few programs isntalled from source/binary installers in /usr for example. Would it cause problems?
And is there any chance to be able to switch from a 32 bit kernel to 64 bit kernel during the update? The hardware is capable of this.
View 4 Replies
View Related
