Fedora :: Ipv6 Failing / Why Is So?

Jan 20, 2010

I am new here and Fedora. Currently running Fedora 12 and recieved kernel crashes to which error report shows failure with IPv6.

I have disabled Ipv6 in /etc/sysconfig/network, blacklisted and stop these services.

However why is my Ipv6 failing?

View 2 Replies


ADVERTISEMENT

Fedora Networking :: Ipv6 With Tunnel Broker - Better Client For Non Native Ipv6 Connectivity?

Jul 22, 2009

I used to play with gw6c ( a client for tunnel broker ) It works well with fedora9 , fedora 10, but not with leonidas. my rpm is gw6c-6.0-0.4.beta4.fc9.i386.rpm ( a little old!) when I tried to install i have got this: libcrypto.so.7 est ncessaire pou w6c-6.0-0.4.beta4.fc9.i386 I try to make a soft link to libcrypto.so.0.9.8k, but nothing; The question :-Is there a solution for that pb - did you know a better client for non native ipv6 connectivity?

View 2 Replies View Related

Fedora Networking :: FC15 IPV6 Wireless Router - No Longer Gets An IPv6 Address

Aug 31, 2011

I have been struggling to get FC15 to act as an IPv6 router for a while now, am sure I am missing something trivial.. The idea is that I have a ppp / adsl connection (this works fine), use the wireless card on my pc with hostapd and dhcpd to provide connections to other pcs (works fine), and radvd to delegate ipv6 addresses.

The issue seem to be that as soon as I turn on ipv6 forwarding (net.ipv6.conf.all.forwarding =1), the ppp connection no longer gets an IPv6 address. This means the router cannot ping any ipv6 address outside my network.

If I disable ipv6 routing, my router gets an IPv6 address on its ppp connection, and can ping things such as ipv6.google.com just fine, however (of course) no packets are forwarded from my network and radvd complains that forwarding is disabled.

View 1 Replies View Related

Red Hat / Fedora :: Box Into An IPv6 PIM-SSM Router?

Nov 16, 2010

Capable of multicasting Has anyone been successful with RHEL or Fedora?

View 1 Replies View Related

Fedora :: Getting Linphone To Work On IPv6?

Mar 5, 2010

I had just installed linphone in Fedora 10 using # yum install linphone and face the following problem. I installed linphone in 2 clients via LAN and using IPv4 address, I am able to call each other. However when I changed the preference to use IPv6 in the network (the network support IPv6), I am not able to call to each other using IPv6 address.

View 6 Replies View Related

Fedora Networking :: Add Repository Using Ipv6?

Nov 21, 2010

I want to add repository using ipv6. So, I add a xxx.repo file in /etc/yum.repos.d/. Just like it:

[sjtu6]
name=Fedora $releasever - $basearch - ftp6.xxx.xxx.xxx
baseurl=ftp://ftp6.xxx.xxx.xxx/fedora/releases/$releasever/Everything/$basearch/os/
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$basearch

View 14 Replies View Related

Fedora Servers :: Apache Binding Only To Ipv6?

Feb 14, 2009

I just installed FC 10 and have apache running with the default config. the problem is that it is only listening on ipv6 for ports 80 and 443

Code:

Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:587 0.0.0.0:* LISTEN 2059/exim
tcp 0 0 0.0.0.0:465 0.0.0.0:* LISTEN 2059/exim

[code]....

here is the only part in the httpd.conf file that seems to have anything to do with this:

Code:

Listen 80

which from my understanding should make it listen on all interfaces, ipv4 and ipv6

View 8 Replies View Related

Fedora Networking :: How To Enable Ipv6 Forwarding

Jun 2, 2010

Okay I have searched how do I enable ipv6 forwarding?

There is no ip_forward in /proc/sys/net/ipv6/

View 1 Replies View Related

Fedora Networking :: [ipv6] What Is Ubuntu Making Different?

Jul 6, 2010

some of you might have experienced the network speed problem that occurs when ipv6 is enabled. So have I. I know about the common workaround of disabling ipv6, but recently I tested the new ubuntu live system, and the problem was gone with ipv6 being enabled.

Now my question is: Do you know what ubuntu is making different? I haven't found an explanation. Is there a better workaround than blacklisting ipv6?

View 1 Replies View Related

Fedora Servers :: Dig Command With IPv6 Address As Server

Mar 2, 2009

I am trying to get the MX record using dig command supplying IPv6 address of host. but i am getting connection timed out .

while with IPv4 address and host-name its working fine.

View 1 Replies View Related

Red Hat / Fedora :: Finch Failing On The 6?

Jan 12, 2010

I am trying to run finch on fedora6. Finch is exiting immediately on starting and i am not able to add any account using it. correct procedure to use finch.

View 5 Replies View Related

Fedora Networking :: Configuring IPv6 (network) Tunnelling - Getting Only Internal Addresses From DHCP

Aug 25, 2011

I am trying to configure my IPv6 network. My computers are behind a Fedora gateway IPv6-configured, which is working great. But for computers inside my network, it seems I am getting only internal addresses from DHCP. Here is my ifconfig for an internal computer:

Quote: em1 Link encap:Ethernet HWaddr F4:6D:04:34:92:2B inet addr:192.168.0.184 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fe34:922b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:744250 errors:0 dropped:0 overruns:0 frame:0 TX packets:548987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:841392242 (802.4 MiB) TX ytes:60384500 (57.5 MiB) Interrupt:18 Memory:f7100000-f7120000

he-ipv6 Link encap:IPv6-in-IPv4 inet6 addr: 2001:470:1c:611::3/64 Scope:Global inet6 addr: fe80::cea7:b778/128 Scope:Link UP POINTOPOINT RUNNING NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:61 dropped:0 overruns:0 carrier:61 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

[Code]....

View 2 Replies View Related

Fedora :: Appearance Failing To Open?

Feb 21, 2010

When I go to Administration->Preferences->Appearance, the window pops up for a split second and is then gone. Attempting to open it again yields the same result. I have never had this issue before and haven't changed anything recently that I recall.

View 8 Replies View Related

Fedora :: Updates Failing On New 12 Install?

Apr 3, 2010

I have recently decided to rebuild my fedora install and have had several problems installing the updates to the system. I am receiving the following error:

libcdio.so.12 is needed by package gstreamer-plugins-ugly-0.10.14-1.fc13.i686 (rpmfusion-free-rawhide)
libcdio.so.12(CDIO_12) is needed by package gstreamer-plugins-ugly-0.10.14-1.fc13.i686 (rpmfusion-free-rawhide)

[code]....

I am more familiar with using sources.list in debian style distros but I am unsure how to proceed with /etc/yum/repos.d. I am currently attempting to either install them from the CLI or to download the binaries, but I do not think that will fix the problem in my repository lists.

View 3 Replies View Related

Fedora :: Failing HD And Restore Not Restoring

Dec 20, 2010

The HD containing my main F14 install is suddenly failing with many unreadable blocks. So I booted a different F14 installation I have on another disk.

Then I run dump, for example, as following:

Code:
dump -0 -a -q -v -A sdb1_home.arc -f sdb1_home.dmp -L F14_sdb1_home /dev/sdb1

as, for what I can recall, I've often done to create full backups.

The problem is that running restore with this command:

Code:
restore -i -A sdb1_home.arc -f sdb1_home.dmp

(as, for whatI can...) and using the add and extract commands, only the directory are created. But files are listed using ls. If I add just a file, only dirname is extracted.

View 9 Replies View Related

Fedora :: GNU C++ Compiler Failing To Install

May 31, 2011

So apparently the GNU c++ compiler did not install when I did:

# yum install gcc

And now it's failing to install the C++ compiler when I do:

# yum install gcc-c++

It's saying it's running out of mirrors to check or something? Does anyone know what else I can do to install it?

View 1 Replies View Related

Fedora Networking :: Failing To Configure Dnsmasq?

Jun 11, 2009

I have configured a Fedora 10 server on a mixed Win / ix network but am unable to get DNS to resolve on my Fedora boxes.My DHCP is provided from a D-Link 108G Router - but this will not provide DNS.Therefore I have tried to configure dnsmask to provide just DNS and not DHCP. I can ping around my 192.168.1.x network by IP but not name

View 4 Replies View Related

Fedora Installation :: Mozilla Failing To Open

Sep 1, 2009

Skype doesn't recognise my plugged in mic and earphones. I can hear sound through the headphones from other programs. DVD burner burnt a cd for me, but seemed to pause at around 15-20% and sat there for half an hour. When I ejected CD it jumped to 100% stating it had finished. The CD was a Live Install CD for Ubuntu, which didn't work. I get I/O errors when trying to install from CD on start up. I'm guessing it didn't burn properly or isn't being read properly. I'm generally unsure of what drivers are installed for all of my hardware. Not sure if there is an auto-detection program in or for Fedora that can help, or if I will have to stop being lazy. Skype, like mentioned before. I'm not sure if this is a software issue or driver issue.

Mozilla failing to open. When clicking on the Firefox icon it wouldn't start. Shows an icon at bottom of monitor on toolbar, but disappears after 5-10 seconds with no browser opening. I had recently installed a VLC player with plugin for Mozilla while logged in as root. Wondering if I messed this one up myself? I stumbled onto updates and it had Mozilla install in there. It works again. I'm sure it won't be reoccurrent. If I were to post system specs and issues I'm having, would someone on this forum be willing to guide me through or point me in the direction of having my laptop fully operational? All drivers basically. It works as is, just not completely

View 7 Replies View Related

Fedora Networking :: VPN (vpnc) On 14 X86_64 Failing?

Nov 5, 2010

I have a couple VPNs I use for work, and after installing F14 x86_64 it is failing:

Code:
Nov 5 12:40:57 raykj NetworkManager[4106]: <info> VPN service 'vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 4203
Nov 5 12:40:57 raykj NetworkManager[4106]: <info> VPN service 'vpnc' appeared; activating connections

[Code]....

View 2 Replies View Related

Fedora :: NFS Mounts And Ypbind Starts Failing

Aug 11, 2011

I'm building a lab of fedora 14 machines that are supported by an RHEL/CentOS 5.6 server. Everything was working fine yesterday, but today ypbind can't connect to the server and nfs mounts fail with this message:

mount.nfs: mount(2): Operation not permitted
mount.nfs: trying text-based options 'addr=10.9.1.6'
mount.nfs: prog 100003, trying vers=3, prot=6
mount.nfs: portmap query failed: RPC: Remote system error - No route to host

I can ping the server from the client using FQDN and ip address.

View 8 Replies View Related

Red Hat / Fedora :: Hard Disk Failing Warning On F12?

Mar 14, 2010

Last week, i updated, my fedora. After that, during every boot up, I am getting a warning message like " Your hard disk may failing". It indicates that it is due to bad sectors. But I don't think so. There was a bug reported for a similar problem in fedora 11. I think it is not fixed yet. Hard disk is not having any problem during data access. Other OS including windows are not giving any warning message.

View 9 Replies View Related

Red Hat / Fedora :: Download Of DVD Distribution Error - Keeps Failing Near The End

Jul 22, 2010

I'm attempting to download the DVD Install ISO for Scientific Linux (Red Hat with some additions for science) to my PC-Laptop external USB Hard Disk, but the download keeps failing near the end.

My PC-Laptop is running Vista 32bit, and the external HD is a 500GB wallet sized Buffalo HD with 400 GB free. I'm no PC sys admin - but the Scientific Linux file is over 4GB in size and I wonder if this might be a problem if the HD is formatted as a FAT32 rather than an NTFS disk (if that's the correct terminology)?

The Windows Vista download window says that I've run out of space on the HD, even though I haven't.

Note that I can't think I can download this as multiple CD's rather than a single DVD distribution - because I'm trying to install this Scientific Linux in Oracle(former Sun) Virtual Box and I'm having difficulties understanding what it wants and was advised by someone to download Scientific Linux as a single iso to burn to a DVD (in the hope that Virtual box will see it for installation in the DVD drive) - but as said I'm unable to even download the DVD installation file.

View 4 Replies View Related

Fedora :: One Or More Hard Drives Failing Icon?

Apr 10, 2010

I ran smartctl and it says "unrecognized" hard drive. I recognized the hard drive the first time I ran the test. But now, it's unrecognized? How come? I don't know how or why this happens. How can I get rid of this problem and the annoying icon?

I tried to run Windows, then started getting errors? This is strange: I've been running Linux the whole day. I last used the Windows hard drive was 2 days ago. Now its screwing up. Window is screwing up the hard drive? HDD has too many bad sectors. didn't touch it, I didn't do much on it, etc? I do not understand?!

View 4 Replies View Related

Hardware :: Bluetooth Quietly Failing In Fedora 12

Feb 1, 2010

I can't get my Fedora 12 laptops to find bluetooth devices. In fact, I can't seem to get bluetooth working at all. This is happening with identical symptoms on two very different laptops, both of which had working bluetooth out-of-the-box with Fedora 10. Under Fedora 12 bluetooth silently fails and I have no idea how to debug it.

Here are the details:
- I'm running Fedora 12 on 32 and 64 bit machines. Both exhibit the same problem.
- I'm using KDE for both (this is the KDE spin of Fedora 12, the 32 and 64 bit versions)

I've got kdebluetooth installed. When I run

Code:

I see:

So I think the right programs are running.

Using the system menus, I can click on "Kdebluetooth4" but nothing happens. There is no bluetooth icon in the system tray, nor have I been able to discover how to add one (I thought clicking Kdebluetooth4 would do that).

I can manually run kbluetooth-devicemanager from the command line, and attempt to look for devices. The devices are never found (they are found by a nearby Windows machine, so I know the devices work). There are no error messages in the GUI, or in /var/log/messages.

On the console, I do see these messages when I run kbluetooth-devicemanager and attempt to discover devices:

Code:

Based on Google searches, that would imply a problem with dbus (I think) but dbus appears to be installed and running.

View 3 Replies View Related

General :: Squid Failing To Start Fedora 5?

Sep 10, 2009

Squid gives the follwoing error messages when i attepmt to start it:Sep 10 12:33:24 localhost (squid): Cannot open '/var/log/squid/access.log' for writing. The parent directory must be writeable by the user 'squid', which is the cache_effective_user set in squid.conf.Sep 10 12:33:24 localhost squid[3423]: Squid Parent: child process 3446 started

View 3 Replies View Related

Fedora Installation :: Failing Installing Development Tools?

Mar 12, 2009

I installed Fedora 10 on an 8 GB USB-stick using the creator-software for windows. Sadly I am not so familiar with linux but as I am now trying Fedora on a friend's advice I really start to like it

Unfortunatels there ist a problem: I wanted to compile a driver for my wlan-card but got the known error "make: command not found". So I searched this forum and found in this thread that I need to install the development tools. But when I try to do so by typing yum groupinstall "Development Tools" it first starts but then cancels with an error message claiming missing dependencies to a perl package:

Quote:

Fehler: Fehlende Abh�ngigkeit: perl = 4:5.10.0-49.fc10 wird ben�tigt von Paket 1erl-Pod-Escapes-1.04-49.fc10.i386 (installed)

Due to my ignorance I tried yum install perl but this also fails with the same error message I am sure it is just a bite for you but I don't hava a clue right now By the way I already can call the command make install now for the wlan-card driver. It also starts but fails and says:

View 9 Replies View Related

Fedora Networking :: Failing To See Some Wireless Network - F10 On ThinkPad T60?

Jul 21, 2009

I tried fix I pointed here http://fedoramobile.org/Members/MrHappy/troubleshootingNetworkManager fails to see wireless networks with Intel 3945 chipsets(solution deals with the kernel module not with NetworkManager)but nothing to do. My actual problem is I can't see my wireless network but I see just those of my neighbours.I know mine is working because I can connect to using a Mac and windows.

View 5 Replies View Related

Fedora :: QEMU Guests Failing To Boot From HD / Resolve This?

Nov 19, 2009

Having a problem, have built some VM's and importet some from JumpBox, but they will not boot from the HD. I am using files for the HDs mixture of ".img" and ".vmdk". I can boot and build from the network and CD/ISO, but after the installation completes it reboots attempts to boot from the HD and nothing happends. No error message is displayed.

Has any one come across this ?

View 1 Replies View Related

Fedora :: Services (Haproxy And Stunnel) Failing To Start

Dec 3, 2009

I have 2 services registered one for HAProxy and one for stunnel. When I type service start haproxy or service start stunnel they start and everything works fine. I ran ntsysv and they are set as autostart, and I have init.d scripts that work. I have checked the runlevel and using chkconfig runlevel 3, 4 and 5 are :on. And I also added service haproxy start and service stunnel start to inittab. But when I restart the computer haproxy and stunnel fail to autostart. I am a fedora novice and I have no idea why this isn't working...

View 4 Replies View Related

Fedora :: Compiling Code - Failing Sanity Check

Dec 7, 2009

Keep receiving the following error message when i try to compile any code:
Code:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
logs test out some code with the C preprocessor and fail, thereby failing the "sanity check" I reinstalled cpp, but to no avail.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved