Fedora Networking :: Failing To See Some Wireless Network - F10 On ThinkPad T60?
Jul 21, 2009
I tried fix I pointed here http://fedoramobile.org/Members/MrHappy/troubleshootingNetworkManager fails to see wireless networks with Intel 3945 chipsets(solution deals with the kernel module not with NetworkManager)but nothing to do. My actual problem is I can't see my wireless network but I see just those of my neighbours.I know mine is working because I can connect to using a Mac and windows.
View 5 Replies
ADVERTISEMENT
Jul 26, 2010
Just installed 11.3 on an aging IBM Thinkpad X40. But the network (and xdm) does not work. I saw in the logs the cryptic message nl80211 driver does not support authentication/association or connect commands. This machine worked on 10.3, so this is a confusion. What should I try next?
View 9 Replies
View Related
May 14, 2011
My wireless network is down. I got thinkpad x120e, chipset: Realtek RTL8188CE, driver: rtl819ce.
Here is what I did so far:
upgraded to 2.6.38-bpo.2-686
installed firmware-linux-nonfree
Added the firmware file from the repo since it's not yet packaged in firmware-realtek and reloaded the module.
'iwlist sc' shows: 'wlan0 Interface doesn't support scanning : Network is down'
'dmesg |tail -20' shows:
rtl8192ce:rtl92c_download_fw():<0-0> Failed to request firmware!
firmware 0000:04:00.0: firmware_loading_store: vmap() failed
I also tried the following commands:
ifdown wlan0 ; ifup wlan0
ifconfig wlan0 up
Relevant bug: [URL]
Step by step, in case someone is interested:
add to sources.list: deb [URl] squeeze-backports main
aptitude update
sudo aptitude -t squeeze-backports install linux-image-2.6.38-bpo.2-686
install this package: [URL]
get the first file: [URL]
add to driver:
mkdir -p /lib/firmware/rtlwifi
mv rtlwifi_rtl8192cfw.bin /lib/firmware/rtlwifi
modprobe -r rtl18192ce; modprobe rtl18192ce; dmesg | tail -20
View 3 Replies
View Related
Dec 5, 2010
I'm using three different UNIX OS's.I have used gnome on my laptop for most of the time I have had it and I decided it was time for a change in GUI,I am wanting to use KDE but I can't get it to work with my laptop I have tried mandriva 2010.1 spring and that one was slow and it kept dropping my wireless connection.So I got rid of that in tried Kubuntu and now it will not use the wireless.Ubuntu and Ubuntu SE and the live version of super gamer can all connect it's just Kubuntu and mandriva
View 2 Replies
View Related
Feb 7, 2011
I've got a Linksys WRT54G router with the latest firmware. I've got an HP laptop connecting wirelessly and my main box connecting wirelessly with a Linksys WMP54G card. (As an aside, I used to have another box too with the same wireless card). Both are set up with a static IP. Both can access the Internet just fine. The router is on the main floor. My main box is in the basement. Both boxes are running fully patched versions of Slackware64 13.1. sshd is running on both.
I like to ssh into the other box when there's a security update or to copy a file from one computer to the other, etc. The problem is that I can't do that all the time. Even if the laptop is connected to the network and accessing the Internet, on my main box ssh will still "say ssh: connect to host ***** port 22: No route to host". It is my understanding that if I ssh in, it is accessing the other computer directly and not going through the router. What would cause this? Even if I bring the laptop within four feet of my computer, it still can't connect.
There doesn't seem to be a rhyme or reason to when it will connect and when it wont. Sometimes I can access it just fine then about five minutes later I can't.
View 14 Replies
View Related
Feb 25, 2011
what it takes to get my wireless back up and working. It used to work fine under 10.4 My laptop is a IBM Thinkpad T42, that uses Intel wired and wireless nics. (correction, looks like the wireless nic is actually Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01) )
-Laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
[Code].....
View 8 Replies
View Related
Feb 19, 2010
I use this Thinkpad mostly for work while traveling, and wireless connectivity is not a big issue for me. Battery life is a big issue, however. I've just converted from Mandriva. With that, I was able to disable the wireless adapter so that it did nothing at all on boot - and only started on my instruction. This made a dramatic difference to battery life! How to achieve this in Ubuntu? The file attached gives all the info about my wireless set-up as it stands.
View 7 Replies
View Related
Feb 9, 2011
I have a pretty new Lenovo Thinkpad L412, with Ubuntu 10.04 LTS. I can't log in to any wireless network (I have dual boot with Win 7 and it works there). The available networks shows up in the list but I can't connect them, "no network connection" it says.
View 3 Replies
View Related
May 29, 2011
I have a Thinkpad E420 and am having major problems getting the RTL8188ce wireless to work. I'm running 64-bit. I was following instructions from this thread: [URL]
I installed the drivers from the Realtek website for the updated kernel (URL is in the previous thread link). Modprobe didn't work, but it looked like wireless drivers were installed anyway after I did "make install." But I still run into this problem in the network manager: Enable Wireless is checked, but above it, Wireless Networks is greyed out with "wireless is disabled" underneath.
Later in that thread, someone posted a link to a PPA with drivers that should work. I could not get the PPA to work through terminal, but I did manually download and install those drivers. Same problem.
lspci:
Code:
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
[Code]....
View 2 Replies
View Related
Sep 1, 2011
I just recently purchased a Lenovo Thinkpad e520 and I'm wanting to put Ubuntu 11.04 on it. I downloaded the 64bit iso and burned it to a thumb-drive, just before booting the thumb-drive. I have not yet installed Ubuntu, but rather I'm still running it from a thumb-drive. I want to make sure everything will work fine, before installing it permanently.
However, it doesn't appear as if any drivers for my wireless card were loaded, as I can't view the available wireless networks. I successfully installed Ubuntu 11.04 on my desktop several months ago and I haven't booted into Windows since, -not one time. Therefore, I'm hoping to have my new laptop run Ubuntu as well.
View 6 Replies
View Related
Oct 27, 2010
I have a Thinkpad W500 with:
Code:
Network controller: Intel Corporation Wireless WiFi Link 5300
I have Ubuntu 10.04 32bit installed:
Code:
Linux dani-laptop 2.6.32-25-generic #45-Ubuntu SMP Sat Oct 16 19:48:22 UTC 2010 i686 GNU/Linux
It has been working fine since I installed 10.04 but recently (end of last week I think) it stared dropping the wireless connection very often. So it will disconnect and reconnect, but I can't seem to find a pattern, sometimes it goes for hours without an issue and sometimes it does it several times in a row. Below is an extract of syslogs from when this happens. But not sure if what I need is there... the only weird thing I can see is:
Code:
Oct 27 18:58:33 username-laptop wpa_supplicant[1296]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Code:
Oct 27 18:58:32 username-laptop wpa_supplicant[1296]: Trying to associate with 00:1e:be:a6:c0:0f (SSID='accessp' freq=5280 MHz)
Oct 27 18:58:32 username-laptop NetworkManager: <info> (wlan0): supplicant connection state: completed -> associating
Oct 27 18:58:32 username-laptop kernel: [123835.372217] wlan0: deauthenticating from 00:1e:7a:6f:d9:90 by local choice (reason=3) .....
Oct 27 18:59:29 username-laptop ntpdate[4765]: no server suitable for synchronization found
View 6 Replies
View Related
Oct 21, 2010
Thinkpad t410, ubuntu 10.04.01 64 bit, can not access internet suddenly by wireless router(Netgear WGR612) today.
I can get ip address from rounter, and can ping 192.168.1.1, but can not access url, telnet 192.168.1.1 80 showed me connection refused error, the weired thing is my another windows xp laptop can access internet through the same wireless router.
View 5 Replies
View Related
Jan 21, 2011
Edit: after upgrading everything using a usb to ethernet port converter ndiswrapper is working perfectly
I do not have internet access on a laptop I am trying to upgrade. It has no ethernet port. I may resort to buying a USB to ethernet adapter but I spent more than I would like to have already. I have tried every command in the HOWTO for wireless difficulties and posted the output.
[Code]...
View 4 Replies
View Related
Feb 18, 2011
I have Ubuntu 10.10 on a thinkpad X201. Wireless was working, but has stopped. It still works in windows, so it is not a hardware problem. iwlist wlan0 scan sees the available networks, but I cannot associate with any of them, including my own.
Last night was my first attempt to connect to a secured network, and nm-applet failed to make the connection even after entering the WEP encryption key and SSID. By turning networking off in nm-applet I was able to manually bring up the connection by editing /etc/network/interfaces and using ifup wlan0. (nm-applet seemed to be interfering as long as networking was turned on there.) Wireless was working perfectly until I rebooted. Now I can't get it to work at all. (There were some partially completed security updates which completed when I rebooted. I hope this wasn't the cause of the breakdown.)I notice that wpa_supplicant is always running. I tried killing it in case it might be interfering with the connection process, but something keeps restarting it.
View 1 Replies
View Related
Mar 5, 2011
I have recently installed CentOS onto an old machine to get it up and running as a basic web/mail server. Originally the Network Interface worked ok, however I have been editing /etc/sysconfig/network-scripts/ifcfg-eth0 to try and set the IP address to be static.Now when I run the 'service network restart' command it won't bring the eth0 interface up and comes up with the following errors;
ifcfg-eth0 Line 3 DEVICE: command not found
missing config file ifcfg-ifcfg-eth0
It doesn't seem to like any of the command words, even though most of these were in the original file that worked and the ones I added to do static I have commented out.
View 4 Replies
View Related
May 5, 2009
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
View 7 Replies
View Related
May 17, 2010
I am trying to connect to an OpenVPN connection using the gnome-network manager. I'd like to point out that using the configuration file in /etc/openvpn works perfectly but I have no way of knowing if the connection has dropped. When I set up the connection in the nm it connects for a few seconds then fails. The /var/log/messages file shows this:
May 17 08:31:37 lucid64 kernel: [ 4594.043637] tun0: Disabled Privacy Extensions
View 2 Replies
View Related
Sep 1, 2010
My ubuntu system has been running really well until this morning - software update prompt appeared on the screen, so I ran with it and let it do its thing. A while after this, my WiFi network connection started failing. I've tried rebooting and then it can take up to five minutes or more for the password (keychain) prompt to appear. Once I have typed in the password the network connection starts to work. Then cuts out. Works. Then fails again.
View 3 Replies
View Related
Jan 12, 2011
I recently installed ubuntu 10.4 LTS on my IBM T60 ThinkPad, (Love Ubuntu! Will Never go back to Windows)
But now the problem is as followed.: When i'm at work where they have an open (Non protected) WiFi spot i have no problems connecting at all. But as soon as i'm at home or with friends which have WEP/WPA/WPA2 encrypted routers it is impossible to connect, to none of them. not Linksys, not Dlink not Thomsom, simply none. For days i've been hunting the internet for information about this problem but it is impossible for me to find the solution. I've read the Wireless troubleshooting manual from Ubuntu and did all the checks and tests and everything seems fine. The card is an Intel 3945ABG, and in the new Linux Kernels its already pre-installed. It's so frustrating not beeing able to use the internet in a proper way..
Note:
I installed wireshark to experiment at my workplace but its finding nothing at all even though its connected to the internet/LAN Etherape works fine though.
View 9 Replies
View Related
May 26, 2009
After a few years of being a fedora user on a large network, I final decided to bite the bullet and dual-boot my home desktop (solely XP at the time) with fedora 10 on Saturday. The installation seemed to go well, but I am having a few problems, which solved themselves at one point but have come back and I have no idea why.
- I installed and re-partitioned with the install DVD, giving fedora 20GB. Having read a few guides and forum posts I wasn't surprised when the wifi and ATI graphics card didn't work. They appeared in the output of lspci, but I couldn't change the screen resolution and no wireless card was available.
- I bought a new wireless card a while ago but hadn't had time to put in so used this opportunity to do so (installed it in XP to check it worked) and when I rebooted, guess what, the resolution was what I wanted and I could see all the networks in the neighbourhood. I connected, downloaded/installed the myriad of updates together with a couple of programes through yum and went to bed a happy man.
- This morning (my router needed rebooting and after) I was back to the same as before the new wireless card, i.e. low resolution and no wifi. Having no idea what had happened, I check for loose connections, after that the resolution returned and the wifi worked but I can't see my home network.
View 3 Replies
View Related
Sep 11, 2010
I picked up a cheap PC the other day for �20 and it came with a Belkin N Wireless USB adapter. I know the adapter works because Windows XP was originally installed and I could connect with no problems. I wasn't able to connect when I installed Kubuntu so I thought I'd see if I could have any more luck with Fedora....so far, not so good! I realise that this is a fairly common problem, especially for this USB adapter, but I've tried dozens of threads here and elsewhere and still can't get Fedora online.I can see the wireless networks in the list, but if I try and connect then I just repeatedly get asked to enter the authentication details, which I know I'm providing correctly.
View 9 Replies
View Related
Sep 14, 2010
I just installed Fedora 13 on a Fujitsu Siemens Amilo 3553, after doing some testing in Mandriva 2010.1 Spring XFCE. I am not (I repeat "not") an experienced Linux-user, so maybe I need to get things with a spoon here, but the wireless networking in Mandriva is similar to the one in Fedora, and in Mandriva it worked fine, in Fedora I cant get connected. It just ask me for the password over and over again. Now I am on cabel, and that works fine.
View 12 Replies
View Related
Jun 12, 2011
After installing Fedora 15 on my notebook, I found that the one thing that I am unable to do is connect to a hidden encrypted wireless network automatically. I've seen plenty of people inquiring about this online but have found no solution. I can set up whatever I want to in my settings (using the old gnome2 interface setup, the gnome3 interface setup leaves the wireless options unconfigurable for some reason so I can't do anything with the "Network Name" dropdown)
All of my settings have been set up using the network manager from gnome2, but that doesn't seem to translate to my gnome3 desktop. So, is there any way to get the wireless to connect automatically on startup? I know my wireless card is working when I start my computer because it shows some of the networks in the area and I can connect to a few of the unprotected networks. This is the only problem I have with gnome3.
EDIT: from dmesg, I find the following: [485.63] ADDRCONF(NETDEV_UP): wlan0: link is not ready
EDIT #2: Going into the network settings just to play around with it, I discovered that the network name dropdown box appears to be grayed out, but now it works when I click it (didn't the first time) -- this allowed me to connect to my hidden wireless network. Still however, it does not connect automatically (system default is the hidden wireless network) and I still have the DNS problem
View 1 Replies
View Related
Aug 12, 2011
I have upgraded to Fedora 15 but cannot get wireless up and running. When i switch on wireless and choose the connection it tries for 15 seconds before prompting me for the password and continues like this. When i check the device in my network config it shows as being inactive. Ralink device 3060
View 6 Replies
View Related
Sep 27, 2009
Where I can get my wireless network running by typing the following lines of code:
Code:
But I have to do this every time I boot the machine. Ideally, I want the machine to do this on it's own at startup.
Also, I'm totally new to linux and I don't really understand what the 1st line of code is doing? The 2nd is just to check that the 1st line worked, and the 3rd does the settings for the wireless network I'm connecting to.
If you want to get into why I have to do this every time, then look at my original thread. But I started this new thread just to find out how I can get these lines of code done automatically at startup.
View 4 Replies
View Related
Nov 27, 2009
I'm having trouble getting this wireless card to work. I installed the broadcom-wl driver on Fedora 12.
Code:
[xxx@localhost ~]$ uname -r
2.6.31.6-145.fc12.x86_64
[xxx@localhost ~]$ lsmod | grep wl
wl 1278432 0
lib80211 6436 2 lib80211_crypt_tkip,wl
The card is recognized by System--admin--network as the correct card (BCM43XG) and assigned eth1. However, NetworkManager shows no wireless network. I have a great signal on the same machine if I boot into a Windows partition.
View 4 Replies
View Related
Feb 9, 2010
I'm running the 64-bit version of Fedora 12 on a MacBookPro5,1 system. I am unable to connect to my wireless network, which shows up in the list of available wireless networks.
I will enter my password and the system will try for several seconds to establish a connection and then fail.
I know the network is fine because I can connect to it when I boot the computer in Mac OS X.
What can I try that will allow me to connect to my wireless network under Linux?
View 1 Replies
View Related
Apr 17, 2010
I recently installed Fedora on an old computer of mine that I pulled out of storage, and I can not get it to detect my wireless network. Previously it was running Windows XP and I was able to get it to connect, but now that I'm on Fedora it doesn't even detect my network. I tried lspci and lsusb but I didn't find anything under network, only Ethernet showing my linksys. I know I must have a wireless chipset, but nothing will show.
I also attempted to yum install ndiswrapper because another thread with a similar problem suggested this, and when it prompted me for my password it wouldn't let me type. How would I go about fixing this?
View 14 Replies
View Related
Apr 24, 2010
I have installed Linux for the first time on an old Gateway purchased from work. The system seems up and running, but I can't get connected to my wireless or the wired network. I have tried using the network manager, but it isn't working. I have tried reinstalling Fedora 12 I have the following LSUSB and LSCPI output.
[Code]...
View 6 Replies
View Related
Jul 14, 2010
To setup a Compact Wireless-G USB Network Adapter (WUSB54GC) on Fedora 12 ?
View 1 Replies
View Related
