Fedora Installation :: Yum Install Dhcp - Error ?
Oct 5, 2009
For a school project I need to install a Fedora virtual machine (on VMware Server), setting it up as a server. I am encountering the following problem.
When I want to 'yum install dhcp' I get the following error message:
Quote:
I think the link to the download site is not right.
I have checked internet and DNS acces, both are correct and tested..
I have opened the /etc/yum.repos.d/fedora-core.repo file, and this is the entry:
Quote:
Im using Fedora Core 5.
View 7 Replies
ADVERTISEMENT
Feb 8, 2010
first: PXE flawless bind to dhcp address but put next binding state to free second: when installer calls init script to reinit ethernet driver (e1000 (vmware)) binding fails 11.2 opensuse fail to reinit dhcp with log entry "no free leases" third: when manual set network install works how to preserve dhcp lease on reinit of driver?
View 1 Replies
View Related
Nov 18, 2009
I am trying to install fedora 10 kickstart on my server.But I can't, because my kickstart installation hangs at post install scripts.It is not showing any message & stopped.
View 1 Replies
View Related
Mar 28, 2011
I am running Fedora 12 and I am trying to install the DHCP. well I use the yum -y install dhcp command and this is what I get "Transaction Check Error: file /user/share/man/man5/dhcp-eval.5.gz from install of dhcp-12:4.1.1-18.P1.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-12.fc12.i686
file /usr/share/man/man5/dhcp-options.5.gz from install of dhcp-12:4.1.1-18.P1.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-12.fc12.i686"
I am a newbie at this and I tried the yum remove, yum update and the yum update says dhcp packages available but not installed.
View 3 Replies
View Related
Oct 9, 2015
I've run into a situation where when performing a pxe/preseed install the system boots up into the install without issue, getting a dhcp address, then the installer begins to configure the network and it gets to where it request a dhcp address and it instantly fails the install stating that we are either not using dhcp or it's slow.
I've added d-i netcfg/dhcp_timeout string 600 to the preseed file but it doesn't seem to be honoured here since it doesn't wait 600 seconds before failing. I have 2 other identical systems that install using the same preseed file but the installer completes as expected. This system has no issues installing centos just debian fails. I did try, once the install failed, to switch to the console and run udhcpc and the server received the address reserved for it.
Is there a method to force debian installer to wait a bit longer for the dhcp server besides what I've already done?
View 0 Replies
View Related
May 21, 2011
I recently purchased a Dell Vostro v130 which came with Win 7 pre-loaded. I've been using it for a few weeks with no problems, but now I'd like to install ubuntu studio. I made it through the the partitioning part but now I'm getting a networking error: "Network autoconfiguration failed. Your network is probably not using the DHCP protocol. Alternatively, the DHCP server may be slow or some network hardware is not working properly."
I've been using the wireless connection in win 7 without any problem so I don't know why I'm having a problem now.
View 9 Replies
View Related
Feb 24, 2010
I am trying to install dhcp server on F12 with yum, but at the time I issue yum install dhcp, I got the following message:
Transaction Summary:
Install 1 Package(s)
Upgrade 0 Package(s)
Total size: 821 k
Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Check Error:
file /usr/share/man/man5/dhcp-eval.5.gz from install of dhcp-12:4.1.1-5.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-17.fc12.i686
file /usr/share/man/man5/dhcp-options.5.gz from install of dhcp-12:4.1.1-5.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-17.fc12.i686
And I see that if I uninstall the dhclient package, I will lose my networkmanager, which I also need, is there a way to have a dhcp server as well as dhclient utility on fedora as it is possible on rhel?
View 1 Replies
View Related
Oct 13, 2009
So I've been having major problems with Ubuntu, and I've decided to give Fedora a try. But low and behold, I'm having some troubles here too.
The install CD gets past the point where it has the 3 colored bars on the bottom of the screen loading up the system. Then it goes to a screen and prints out some lines (pretty sure its just part of the system booting up). So everything is going fine, then it gets to the following line...
Code:
VFS: inodes on changed media or resized disk sr0
And it keeps spitting that line out over and over and over again.
I googled this error, and apparently it can happen sometimes if your HD isn't connected properly or isn't talking with the computer properly. But I know that it is because I currently have a 250g partition with Vista on it that I can access just fine. And also a 250g ubuntu partition on it.
However, when I try to go into the Ubunut installation via grub, it says that it doesn't exist.
So do I need to use gparted or something to reformat that portion of my hard drive? Or is there something else I can do to get that error message to go away?
View 3 Replies
View Related
Nov 4, 2010
downloaded the install dvd mounted it and ran it but I am getting an error line 55 of the kickstart file: section does not end with %%end install exited abnormally.
View 3 Replies
View Related
Feb 17, 2009
I have downloaded fedora 10, i386 and right to DVD/UD using 4x write speed. I have one machine have installed win xp, now i want to over right here, when i select installation , its asking common questions like language, drivers, when i select from Local CD/DVD i got 'No Driver Found' Error.
View 1 Replies
View Related
Oct 22, 2009
I have Vmware Fusion 2.0.6 (196839) running on my MacBook Pro. I installed Fedora 11 on the fusion and it works fine. The only problem that I am having is that when I try to install vmware tools, by runnning ./vmware-install.pl in the terminal, I am prompted with this message: What is the location of the directory of C header files that match your running kernel? [/usr/src/linux/include]
If I press Enter, the same message pops up. I am fairly new to linux, and I am just setting this up so I can set up a web server on this virtual machine for testing purposes.
the kernel that I have running is:
root@box1 include# uname -r
2.6.30.8-64.fc11.i686.PAE
View 1 Replies
View Related
Apr 30, 2010
Keep in mind that I am a newbie to Fedora.
First off I have set up the PC so that it dual boots XP and Fedora 12
I have been struggling with the installation of openoffice 3.2
I have watched a tutorial on ..... where he was able to do it on Fedora 12 using the
Add/Remove Software feature just by simply typing in openoffice.org.
I have tried this multiple times and can't seem to get it working.
I have also tried using the yum command through terminal
I have been using "yum localinstall" and recieve this error
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora.
Please verify its path and try again
View 9 Replies
View Related
Feb 10, 2010
i have installed dhcp server on RHEL5.after instalation when i want to restart it.it shows failed message. rpm package is also installed.(dhcp-3.0.5-13.el5) dhcpd.conf file is also in /etc directory
View 1 Replies
View Related
Jul 9, 2009
I'm trying to install Fedora 11 on a Dell Latitude c810 (PIII 1ghz, 256mb ram, GeForce2 GO)
When trying to boot from the Live CD it goes to the first fedora boot screen where it counts down from 10 then tries to boot.
It then says "IO Apic resources could not be allocated" then moves onto a fedora loading bar which completes... but the next screen is completely black, I've tried letting it stay there for 10 or so minutes but nothing happens.
View 7 Replies
View Related
Dec 9, 2009
An install of skype via gnome menu as well as via console ends with:
Lade Pakete herunter:
Warnung: rpmts_HdrFromFdno: Header V3 DSA-Signatur: NOKEY, Schl�ssel-ID d66b746e
skype/gpgkey | 15 kB 00:00 ...
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in <module>
yummain.user_main(sys.argv[1:], exit_code=True)
File "/usr/share/yum-cli/yummain.py", line 315, in user_main
errcode = main(args)
File "/usr/share/yum-cli/yummain.py", line 263, in main
return_code = base.doTransaction()
File "/usr/share/yum-cli/cli.py", line 412, in doTransaction
if self.gpgsigcheck(downloadpkgs) != 0:
File "/usr/share/yum-cli/cli.py", line 524, in gpgsigcheck
self.getKeyForPackage(po, lambda x, y, z: self.userconfirm())
File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 3762, in getKeyForPackage
keys = self._retrievePublicKey(keyurl, repo)
File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 3727, in _retrievePublicKey
keys_info = misc.getgpgkeyinfo(rawkey, multiple=True)
File "/usr/lib/python2.6/site-packages/yum/misc.py", line 394, in getgpgkeyinfo
raise ValueError('No key found in given key data')
ValueError: No key found in given key data
What can I do?
View 2 Replies
View Related
Dec 9, 2009
I want to view movies and livestream on the Internet and I tried many times installing the flash player for my fedora liveCD but still its not working. There always been an error. I been using all the options and installation instruction posted on the adobe site but still I can't find my way in.
View 3 Replies
View Related
Jun 29, 2011
I have just fresh installed Fedora 15 over my (very) old copy of Fedora 11. I wanted to play around with Linux.
Anyway, when I log in, I get the "Oh no! Something has gone wrong" (like I stated).
View 3 Replies
View Related
Jun 15, 2009
I live in a country where 1Mbit broadband is a premium service for large businesses. I am paying a little over $40 a month for a 128k connection with monthly capping. I want to download Fedora but the download is just huge for my connection, especially as it is used for work 14 hours a day. I have attempted the LiveCD and got the 'ext4 cannot be used for boot' error. I also have several other specialised distros on this machine and it's going to be a pain inserting a new boot partition just for Fedora.
Like it is possible with Slackware, can I just download the first CD of the Fedora 11 set and get a minimal install from this or does Fedora need the whole set of disks? Is there a simple enough net install option that I could use instead? I can't understand why they can't just release something like Ubuntu's alternate install CD.
View 10 Replies
View Related
Aug 25, 2010
I'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.
View 2 Replies
View Related
Sep 12, 2010
After a hiatus, I'm fussing with Fedora again. I'm using the 64 bit version of R13. A screen popped up saying I needed to apply fixes to the installion. The maintenance process fails, when tried several times.
FWIW, I get an analogous error associated with packages trying to install Flash into FireFox.
Is it possible that the package archive has been corrupted?
View 2 Replies
View Related
Mar 26, 2011
Running -current (13.37) I noticed what looks like a bug in the rc.0 and rc.6 scripts. These check for a *.pid file in /etc/dhcpc to determine whether to stop dhcpcd with a -k parameter. In fact, the pid files are written to /var/run so the scripts are looking in the wrong place.
View 9 Replies
View Related
Oct 12, 2010
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies
View Related
Oct 22, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 6 Replies
View Related
Jul 1, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 2 Replies
View Related
Mar 25, 2010
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
View 2 Replies
View Related
Jan 17, 2011
I have had Fedora 14 running well on my Dell Latitude XT. All was good until I created an NTFS partition and attempted to install windows XP on it. The installation failed, then when the computer boots i get:
"Error Loading Operating System"
I have attempted the following:
1) FedoraLive from USB then :
Code:
[root@localhost liveuser]# grub-install /dev/sda
Probing devices to guess BIOS drives. This may take a long time.
/dev/mapper/../dm-0 does not have any corresponding BIOS drive.
2) I tried:
Code:
# grub-install --recheck /dev/sda
Probing devices to guess BIOS drives. This may take a long time.
/dev/mapper/../dm-0 does not have any corresponding BIOS drive.
View 6 Replies
View Related
Mar 11, 2009
i accidentally pulled the power while an upgrade was going on. I felt bad, so went to do "yum-complete-transaction" only it was going to remove my entire system. Bad idea. So, instead, I tried to do yum update on my own. Well, it says that i need a package (glib2-some version-already-installed) to upgrade the glib2-devel package. The problem is that the version needed is already installed. I tried getting yum to reinstall it, but that didn't fix anything. Mainly because it says that is installed and not available. So the final error is "no package matched to install." I know that this probably looks weird and disjointed, so I am happy to provide info to try and get this fixed.
View 6 Replies
View Related
Jan 20, 2010
I'm trying to install Fedora 11 (64-bit) but after a small message about ISOLINUX the monitor refreshes and displays the following message: "Press the <Enter> key to begin the installation process." At that point the keyboard dies and I can't go any further. I tried 4 different FC11 dvds, also tried different PS2 and USB keyboards but the problem persists.
How to install FC 10 first and then upgrade to FC11. I tried that as well with no luck. I can install FC10 with no problems but why not FC11?
View 7 Replies
View Related
Dec 1, 2009
i try today to install Firestarter , unfortunately i got some problems regarding of the following messages:
1- insufficient privileges :
2- how can i change and save the file /etc/sbin/firestarter with visudo cammand
3-i got this message when i try to run it through terminal Error reading /proc/net/ip_conntrack: No such file or directory
View 5 Replies
View Related
Mar 8, 2010
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies
View Related
