Fedora Installation :: Error "no Package Matched To Install"
Mar 11, 2009
i accidentally pulled the power while an upgrade was going on. I felt bad, so went to do "yum-complete-transaction" only it was going to remove my entire system. Bad idea. So, instead, I tried to do yum update on my own. Well, it says that i need a package (glib2-some version-already-installed) to upgrade the glib2-devel package. The problem is that the version needed is already installed. I tried getting yum to reinstall it, but that didn't fix anything. Mainly because it says that is installed and not available. So the final error is "no package matched to install." I know that this probably looks weird and disjointed, so I am happy to provide info to try and get this fixed.
View 6 Replies
ADVERTISEMENT
Nov 5, 2009
I have a problem with yum installer every time i want to install a new package it gets error:
View 2 Replies
View Related
Dec 16, 2010
I've used yum (and rpm) for some time now, and have finally run into one of those dependency problem. I am trying to install git (among other programs), and I have reach an empass. Nothing I've tried has worked, and I just know there is a simple solution to this that I just don't know. It all started by skipping a dependency in the past (don't remember the package). I figured there would be something to clean that up, so I just continued.
Here is my output:
Code: # yum install git
Loaded plugins: fastestmirror, langpacks, presto, refresh-packagekit, security
Adding en_US to language list
Loading mirror speeds from cached hostfile
Excluding mirror: ftp-stud.fht-esslingen.de
Excluding mirror: wftp.tu-chemnitz.de
* livna: rpm.livna.org
* rpmfusion-free: mirror.hiwaay.net .....
--> Processing Dependency: perl(Error) for package: perl-Git-1.7.3.3-1.fc14.noarch
--> Finished Dependency Resolution
Error: Package: perl-Git-1.7.3.3-1.fc14.noarch (updates)
Requires: perl(Error)
Error: Package: git-1.7.3.3-1.fc14.i686 (updates)
Requires: perl(Error)
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
If I need to, I could go and download the RPM package and install it that way, but I'd like to get YUM back working properly.
View 7 Replies
View Related
Mar 17, 2010
tl;dr - sudo make -> operation not permitted, sudo chown -R 777
* -> operation not permitted on some of the files
I am trying to install a library. Sudo make is getting permission denied on file 1, while using regular make I am getting permission denied on file 2. I have noticed some of the directories in the library are under nobody:nogroup. I tried chown and sudo chown, both didn't work. Sudo chown got permission errors, while chown didn't change ALL the files. (operation not permitted once again) Tried sudo su, and working from there, that also did not work. (permission once again). Using lsattr returned "lsattr: Inappropriate ioctl for device While reading flags on".
Code:
sudo chmod -R 777 *
chmod: changing permissions of `Makefile': Operation not permitted
chmod: changing permissions of `Makefile.am': Operation not permitted
chmod: changing permissions of `Makefile.in': Operation not permitted
chmod: changing permissions of `queue.c': Operation not permitted
chmod: changing permissions of `queue.h': Operation not permitted
chmod: changing permissions of `ucutil.h': Operation not permitted
Note the .libs folder not having write permission....
Code:
chmod -R 777 *
constantin@Nadfadfo:~/network_home/constantin/libraries/unicap/libunicap-0.9.8/common$ ls -la
total 68
drwxrwxrwx 4 constantin constantin 4096 2010-03-17 11:31 .
drwxrwxrwx 8 constantin constantin 4096 2010-03-17 11:31 ..
drwxrwxrwx 2 constantin constantin 4096 2010-03-17 11:31 .deps
drwxr-xr-x 2 nobody nogroup 4096 2010-03-17 11:31 .libs
-rwxrwxrwx 1 constantin constantin 15295 2010-03-17 11:31 Makefile
-rwxrwxrwx 1 constantin constantin 130 2010-01-17 08:17 Makefile.am
-rwxrwxrwx 1 constantin constantin 15262 2010-01-17 08:17 Makefile.in
-rwxrwxrwx 1 constantin constantin 6101 2010-01-17 02:49 queue.c
-rwxrwxrwx 1 constantin constantin 1667 2010-01-17 02:49 queue.h
-rwxrwxrwx 1 constantin constantin 125 2010-01-17 02:49 ucutil.h
System: Karmic Koala 64-bit
View 1 Replies
View Related
Aug 3, 2010
I'm trying to run Processing with this instructions but when I try to install Jikes I get a dependencies error: HTML Code: Error: Dependency is not satisfiable: j2re1.3|j2sdk1.3|j2re1.4|sun-j2re1.4|sun-j2re1.5|sun-j2sdk1.5 I have Java6 jdk and Java6 jdr installed, what should I do????
View 2 Replies
View Related
Oct 2, 2010
I was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot
This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?
View 4 Replies
View Related
Oct 24, 2010
I tried to upgrade my Fedora 12 machine using preupgrade to Fedora 13.I went through the initials steps of preupgrade and rebooted when requested.A number of packages were installed until I encountered the following error and the installation quit.
Error Installing Package..A fatal error occurred when installing the tzdata package.This could indicate errors when reading the installation media. Installation cannot continue. Exit installer.Note that before I started the preupgrade processes I updated all packages I had installed in Fedora 12 including yum.
View 2 Replies
View Related
Aug 30, 2011
I tried doing a fresh install of F15 today on my computer, and I have a problem. When I try to install to hard drive, I get as far as choosing storage, then it examines storage devices and closes. I get an error that says a package has crashed. (I would post it up, but its not notifying me anymore)
View 2 Replies
View Related
Feb 22, 2011
i have installed bless hex editor on my fedora 14 laptop.However when i open it ,it shows "mono-core wants to install a font language code not matched: utf-8" i am not able to use bless hex editor properly.
View 4 Replies
View Related
Mar 6, 2009
I made mpg123 rpm for x86_64 architecture but i'm not able to install it!I used the rpmbuild from RPM v. 4.6.0.i tried this
Code:
sudo yum localinstall mpg123-1.6.4-10.fc10.x86_64.rpm
and i got
[code]....
View 3 Replies
View Related
Oct 6, 2010
I downloaded the 6.06 version of xubuntu because i have a laptop that doesnt support high graphics mode, and i wasnt able to figure out how to get it to run in low graphics mode. i figured that i would get a version from a while back, and then update it up to the current version. now, to the problem. I was able to upgrade 6.10, but now it says Ubuntu version 8.04 available, so i tried to update it. it gets most of the way through the part where it says calculating or something like that, and then it says: "Can't install 'xubuntu-desktop' It was impossible to install a required package. Please report this as a bug." with an option that says close at the bottom. when i click close another window pops up that says: Could not calculate the upgrade A unresolvable problem occurred while calculating the upgrade. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bugreport. Then the window just closes... anything that i could do to get rid of this problem? EDIT: Is there any way to update directly from an .iso file on the desktop?
View 1 Replies
View Related
Feb 3, 2011
I am following this guide to installing eclipse via terminal command-line on Linux. However, this seems to be happening lately with all the packages I try to install..I checked the Synaptic Package Manager and reloaded and rebooted the computer, but to no avail.
View 5 Replies
View Related
Mar 12, 2009
I'm logged in as root and want to run Add/Remove Software (Package Installer) but get the message telling me
Code:
Running graphical applications as a privileged user should be avoided for security reasons. Package management applications are security sensitive and therefore this application will now close.
How must I install applications? Surely the world is getting paranoid with all this hackers and viruses, because with every new version O/S, the security features gets more and more; up to the point that you can't fricken do and play around with your pc as you would.
View 2 Replies
View Related
Dec 11, 2009
I am trying to install kcachegrind and during the ./configure phase I got the following error:
Checking for Qt... configure: error: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation!
Now I guess I have QT installed and I tried to do the following:
./configure --with-qt-includes=/usr/lib64/qt4/include
but that did not work either.. actually checking further I found that the folder include is missing in usr/lib64/qt4/ !!!!
So what should I do... for you info I am listing below the output of:
yum list *-devel | grep -i qt
qt-devel.x86_64 1:4.5.3-9.fc10 @updates
qwtplot3d-qt4-devel.x86_64 0.2.7-6.fc9 @fedora
PackageKit-qt-devel.i386 0.3.16-1.fc10 updates
PackageKit-qt-devel.x86_64 0.3.16-1.fc10 updates
PyQt-devel.i386 3.18.1-5.fc10 updates
PyQt-devel.x86_64 3.18.1-5.fc10 updates
PyQt4-devel.i386 4.6.2-3.fc10 updates
PyQt4-devel.x86_64 4.6.2-3.fc10 updates
QtRuby-devel.i386 4.3.3-4.fc10 updates
QtRuby-devel.x86_64 4.3.3-4.fc10 updates
SoQt-devel.i386 1.4.1-9.fc9 fedora
SoQt-devel.x86_64 1.4.1-9.fc9 fedora
avahi-qt3-devel.i386 0.6.22-12.fc10 updates
avahi-qt3-devel.x86_64 0.6.22-12.fc10 updates
avahi-qt4-devel.i386 0.6.22-12.fc10 updates
avahi-qt4-devel.x86_64 0.6.22-12.fc10 updates
dbus-qt-devel.i386 0.70-4.fc9 fedora
dbus-qt-devel.x86_64 0.70-4.fc9 fedora
dbus-qt3-devel.i386 0.9-1.fc10 fedora
dbus-qt3-devel.x86_64 0.9-1.fc10 fedora
libprojectM-qt-devel.i386 1.2.0-3.fc10 updates
libprojectM-qt-devel.x86_64 1.2.0-3.fc10 updates
php-qt-devel.i386 4.3.3-4.fc10 updates
php-qt-devel.x86_64 4.3.3-4.fc10 updates
polkit-qt-devel.i386 0.9.2-1.fc10 updates
polkit-qt-devel.x86_64 0.9.2-1.fc10 updates
poppler-qt-devel.i386 0.8.7-7.fc10 updates
poppler-qt-devel.x86_64 0.8.7-7.fc10 updates
poppler-qt4-devel.i386 0.8.7-7.fc10 updates
poppler-qt4-devel.x86_64 0.8.7-7.fc10 updates
qt-devel.i386 1:4.5.3-9.fc10 updates
qt-qsa-devel.i386 1.1.5-5.fc9 fedora
qt-qsa-devel.x86_64 1.1.5-5.fc9 fedora
qt3-devel.i386 3.3.8b-17.fc10 fedora
qt3-devel.x86_64 3.3.8b-17.fc10 fedora
qwtplot3d-qt4-devel.i386 0.2.7-6.fc9 fedora
zbar-qt-devel.i386 0.8-5.fc10 updates
zbar-qt-devel.x86_64 0.8-5.fc10 updates
View 4 Replies
View Related
Jan 7, 2009
installing on linux i try to install VLC and get [user@localhost ~]$ sudo yum install vlc Setting up Install Process Parsing package install arguments Resolving Dependencies
--> Running transaction check
---> Package vlc.i386 0:0.8.7-0.8.fc8 set to be updated
--> Processing Dependency: vlc-core = 0.8.7-0.8.fc8 for package: vlc
[Code]...
View 3 Replies
View Related
Jan 21, 2010
I did the "yum update" today, the process was doing well but, the follow error appears:
Transaction Check Error:
installing package kernel-PAEdebug-2.6.31.12-174.2.3.fc12.i686 needs 9MB on the /boot filesystem
Look:
Code:
Transaction Summary
==================================
Install 10 Package(s)
Upgrade 33 Package(s)
Remove 1 Package(s)
[code]....
View 6 Replies
View Related
Feb 20, 2010
i tried running (yum update, also yum install vlc) and i get these error
Code:
Error: Package: abrt-1.0.7-1.fc12.i686 (updates-testing)
Requires: librpm.so.0
Removing: rpm-libs-4.7.1-6.fc12.i686 (@anaconda-InstallationRepo-200911081854.i386)
[code]....
View 14 Replies
View Related
Mar 24, 2010
I cannot yum install mplayer nor vlc:
Code:
#yum install mplayer mplayer-gui gecko-mediaplayer mencoder vlc
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
No package mplayer available.
No package mplayer-gui available.
No package gecko-mediaplayer available.
No package mencoder available.
No package vlc available.
Nothing to do
Code:
#yum repolist
Loaded plugins: presto, refresh-packagekit
repo id repo name status
fedora Fedora 12 - x86_64 19,122
flash flash 1
livna rpm.livna.org for 12 - x86_64 3
skype Skype Repository 1
updates Fedora 12 - x86_64 - Updates 6,836
repolist: 25,963
Has something changed that I have missed? And I have done a yum clean all.
View 5 Replies
View Related
Apr 24, 2011
i have following list of pakages
1.banshee-2.5.tar.gz
2.virtualbox-3.2_3.2.12-68302~Ubuntu~maverick_i386.deb
2.VMware-Player-3.1.3-324285.i386.bundle
4.gnome-do-0.8.3.1.tar.gz
tell me the terminal commands to install these pakage i have extracted ....gnome-do-0.8.3.1.tar.gz ,,,it extracted into several files.what to do now with that files and also what does the extension (.bundle,.deb )mean how do i install them.
View 6 Replies
View Related
Jan 21, 2011
I try to use Ubuntu Software Center, Synaptic or apt-get to install a package, it seems to give an error(okay, USC stops the install and Synaptic crashes), apt-get gives the traceback
[Code]....
View 6 Replies
View Related
Aug 17, 2011
I'm new to this system and trying to install plug-ins but I always seem to get some sort of rejection..
[root@localhost haley]# yum install vlc
Loaded plugins: langpacks, presto, refresh-packagekit
[Errno 14] curl#6 - "Couldn't resolve host"
Trying other mirror.
Could not retrieve mirrorlist...^... error was
14: curl#6 - "Couldn't resolve host" .....
Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmfusion-nonfree. Please verify its path and try again [root@localhost haley]#
So then I checked to see if I had rpmfusion-nonfree, and I do. I really have no idea what to do, I have spent hours trying to get this work. I want to be able to open any media file, avi, wma, mp4, etc.'m using Fedora 15.
View 2 Replies
View Related
Sep 23, 2010
When i try installing anything i get errors, for example when i try to install somthing from ubuntu software center i get this.
Code: installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Selecting previously deselected package ttf-symbol-replacement. (Reading database ... dpkg: warning: files list file for package `libsdl-image1.2' missing, assuming package has no files currently installed.
[Code]....
View 4 Replies
View Related
Jan 22, 2011
Fedora 14 I recently went to install some software using the source files.When I ran the command
Code:
./configure
I got a message saying that
Code:
package gthread-2.0 not found
After searching the internet some one had the same problem. I needed to install a package called
Code:
glib2-devel
However, rather that searching the internet.
View 1 Replies
View Related
Feb 14, 2009
It seems to me that I've got a dual package somewhere.
Quote:
Transaction Check Error:
file /usr/lib/libakonadi-kabc.so.4 from install of kdepimlibs-4.2.0-1.fc10.i386 conflicts with file from package kdepim-libs-6:4.1.4-1.fc10.i386
file /usr/share/config/plasmoids.knsrc from install of kdelibs-6:4.2.0-10.fc10.i386 conflicts with file from package kdebase-workspace-4.1.4-1.fc10.i386
file /usr/share/kde4/servicetypes/plasma-animator.desktop from install of kdelibs-6:4.2.0-10.fc10.i386 conflicts with file from package kdebase-workspace-4.1.4-1.fc10.i386
[Code]....
View 4 Replies
View Related
Apr 19, 2009
I just installed Fedora9 in my desktop. The installation was successful and it was doing security update and system update right after install. After all the update service finished, I do a manual update to see what happy (Sysem>Administration>Update System). It keeps coming up with Package Error with the message "failed to get a TID: Incorrect path with ';' returned!".
View 8 Replies
View Related
Feb 5, 2011
Package Installation error
Recently I get an error while installing any packages offline.
"Action would require the installation of packages from not authenticated source".
The key icon at top tight corner shows.
View 3 Replies
View Related
Mar 11, 2010
I have installed UBUNTU 9.10(2.6.30)
I'm trying to execute the following command: apt-get install linux-headers-`uname -r` mercurial build-essential cvs subversion libncurses5-dev
I get the following error:Package libncurses5-dev is not available, but is referred to by another package.This may mean that the package is missing, has been obsoleted, or is only available from another source
E: Package libncurses5-dev has no installation candidate
View 2 Replies
View Related
Mar 15, 2009
Sometimes i have on some magazines or Internet Zip packages that are the answer of what i am looking for.
Wich tool and how can i do it? c Well, i am in position to say that i had downloaded from Internet or located the package in the Cd or DVD that comes with the magazine.
But now comes the big question. How can i put this package ( install) on my distro ???
Do i have to be a normal user or should it be root or su (superuser) ?
The packages that come with the distro is easy, because i select them and everything is done
As i told before, maybe this is a silly question, but i simple don't know how to install them and i need some of them to leave MS for good.
View 13 Replies
View Related
Feb 6, 2010
Fedora 12 64bit. Is there an easy and reliable way to install *.tar.gz package after extraction? Instead of going through ./configure etc.
View 6 Replies
View Related
Feb 11, 2010
i have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
View 9 Replies
View Related
