Fedora Installation :: 10 Install Failure After Media Check
Mar 25, 2009
Just to reiterate on the title, the installation of Fedora 10 i386 (DVD) on a 32bit PC. Is failing on me after the media check (whether or not I do it), so not even making it to the language selection. Currently running a nvidia AGP video card was previously using an ati PCI card but swapping has done little to help.
The only argument that lets me passed this point is noprobe, which then fails a bit later as it can't pick up the install media. I've also tried a live CD which seems to be a bit hit and miss as to whether or not it even loads. It then either fails to even let me run the install to HDD or it comes up some error about failures in python code (Don't have the exact error as the last few times haven't even booted). Below is a couple of errors I get from the standard installer
[Code].....
View 8 Replies
ADVERTISEMENT
Aug 23, 2010
I downloaded Ubuntu 10.4 netbook edition for my toshiba satellite a105 laptop (windows XP) burned it to a CD, restarted my computer with the disc in drive, pressed f12 at the appropriate time, chose to boot from CD. after sitting for a second i get error PXE-e61 media test failure, check cable. and then it boots XP normally. how do i get around this to install linux!
View 4 Replies
View Related
Feb 16, 2011
Used to run Gentoo, years ago, getting back on the linux train. Anyways, got a new media pc and am having some troubles getting it to function. I am using ImageWriter, an OCZ Rally 4gb flash drive and have tried both HTTP and BitTorrent downloaded copies of 11.3 with the same md5sum check wrong error. What am I doing wrong? Is it because it thinks it is a CD or am I getting bad copies of the ISO? I am so out of practice I can't remember anything about installation anymore and am at a loss.
View 5 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
Jan 21, 2011
I tried so many times to configure vlc on fedora 11 . But all are failed things that tried are listed below:
Yum install vlc error-> no package found
Downloaded rpm for vlc and try to install but dependency errors
Downloaded mplyer and try to compile but ended with errors, compile with various combinations of parameters but errors are still there.
View 1 Replies
View Related
Jul 1, 2010
I tried to install fedora in my pc. First I insert fedora dvd and install as per procedure then finally system says like that your installation is completed please reboot ur system. So, before reboot I tried to eject my fedora dvd but it couldn't come out. So after click reboot I eject that dvd. And I got error msg like "media test failure exiting intel boot agent". How can I overcome this error.
View 3 Replies
View Related
May 26, 2010
BFO install via USB[URL]..I get through all of the initial menus, and to the main installer, after which is says "starting installation" (this is perhaps 2 hours into the installation). About 3/4 of the way through I get a dialog: "The file libssh2-1.2.4-1.fc13.i686.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source. If you exist, your system will be left in an inconsistent state that will likely require reinstallation. Reboot or Retry"
[screenshot attached] I have clicked retry several times and it doesn't continue. I have previously had no problem installing Fedora 13 beta with the same hardware.
View 4 Replies
View Related
Apr 7, 2010
My laptop died while installing F12, without completing installation. Now I can not boot the computer from HD, CD, or USB. I have flashed the BIOS with the most recent ROM. I can access the BIOS setup and exhausted all my options there, which is mainly boot order. At the moment, the boot process goes to a blinking cursor and does not allow for input. The laptop in question is a lenovo Y510 that was previously running F10 with a single partition.
View 2 Replies
View Related
Jan 5, 2011
Been running Fedora for a while now, iterating up through versions to 12. Decided to to a clean install upgrade to 14. Apparently, bug mistake. Everything seems to be progressing fine, but after 'transferring install image to harddrive', the 'Starting Install Process' fails withsystem-config-lvm-1.1.15-1.fc14.narach.rpm cannot be opened.I have no idea what to do with this. I've reburned the install disk a couple of times (and checked the HASH) -- no apparent problems with the install media.Tech details: x86_64 install on a multi-pro box with a 3ware raid 5 controller (5 disk). I've never run LVMs. Two simple hard partitions (/ and /home). Fedora 12 installed with no problems (as did every other version of Fedora <=12).---------- Post added at 12:29 PM ---------- Previous post was at 11:54 AM ----------Some additional information:1 tried Fedora 13 -- wouldn't even recognize my disks. Installer hung at trying to find basic storage. Not a good sign2 tried my old Fedora 12 install DVD -- again, worked like a charm. Expect that F12 repos are now closed.
So, it seems as if some 'change' between F12 and F13/14 has made some part of the install process choke on my 'hardware' (I'm guessing something related to 3ware RAID card). ---------- Post added at 01:51 PM ---------- Previous post was at 12:29 PM ----------I just tried CentOS 5.5 (x86_64). Also installed fine. For some reason, Fedora >= 13 absolutely won't let me get past the problem noted in the OP. I suppose I could go with CentOS (for long EOL support), but I need some of the newer compiler/dev libs in Fedora 14 for some projects I'm working on.
View 5 Replies
View Related
Aug 21, 2011
I downloaded Fedora 15 Live and Fedora 14 Live to try to see where Linux is for music and broadcast audio on a laptop. It turns out I have to use 14. 14 and 15 both sort of work as live out of the box, although why they ship with the common Broadcom wifi driver missing and the touchpad tap disabled beats me. I also never found the magic button to close down 15. There must be one, but blow me I couldn't find it. Then I tried to follow the instructions at [URL] which mostly seemed to work. I need to keep Win 7 as this is the 32-bit test machine. I used EasyBCD v2.1 rather than the older version the guide is written for.
Booting into Win7 at first worked, then a boot into Linux stopped at a line that said something about a kernel thread helper Then Win 7 blue screened on boot, although it would boot to Safe Mode. Removed Veriface from the Lenovo laptop and it would boot Win 7. Tried setting Drive in EasyBCD to "Boot" rather than "C:" for Fedora. Now booting Fedora gave a Windows missing file message and croaked. Repairing startup with the Win 7 boot CD cured Win 7. Repeated the loop with the same failures. Re-partitioned and re-installed Fedora and just the same - a screen of text that stops. I can now boot to Windows and need help to sort out the Linux boot. How do I start to investigate the screen of text saying things like "__bad_area_nosemaphore" ?
View 5 Replies
View Related
Jan 23, 2009
I have downloaded the Fedora 10 i386 ISO from fedora and created a DVD with Nero. On boot the machine starts to Install, carries out a media check but at the next stage comecs up with an error that the media does not contain fedora 10
View 4 Replies
View Related
Nov 18, 2009
I don't have the greatest network connection so say I install F12 and want to go back and install some stuff I missed first time. It seems that if I use add/remove software that it goes to the repos to download the packages, kind of annoying as I have them on disc. Is there any way to add software from the install discs after the install?
View 1 Replies
View Related
Dec 26, 2009
I have just shifted from Ubuntu based system to Fedora 12, but am unable to install vlc media player on this OS. I searched for the same here and followed the instructions as:
$ su
$ yum install -y vlc
I got these results:
[Code].....
View 5 Replies
View Related
Jun 25, 2009
I'm running a P4 system with Dual ATI Radeon 2900HD Graphics cards. When I try to install F11, the graphical interface fails to start and I end up in a text install. I've seen plenty of information on how to fix the problem post install, however I'm not nearly advanced enough to then continue the installation (the text install does not install much, particularly doesn't install the graphical interface). Is there a way to work around this (IE a more complete text install, or somehow getting it to install in graphical user interface?)
View 2 Replies
View Related
Jun 10, 2009
Can I do a network install using a USB as the boot media. I couldn't find the steps in the long installation help. It explains how to make a livecd boot USB drive but nothing for USB. Please make it clear with exact steps. [URL] says that I have to copy diskboot.img from /Images in install cd but there is no such file. There is a install.img should that be used instead.
View 4 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
Aug 17, 2011
I'm new to this system and trying to install plug-ins but I always seem to get some sort of rejection..
[root@localhost haley]# yum install vlc
Loaded plugins: langpacks, presto, refresh-packagekit
[Errno 14] curl#6 - "Couldn't resolve host"
Trying other mirror.
Could not retrieve mirrorlist...^... error was
14: curl#6 - "Couldn't resolve host" .....
Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmfusion-nonfree. Please verify its path and try again [root@localhost haley]#
So then I checked to see if I had rpmfusion-nonfree, and I do. I really have no idea what to do, I have spent hours trying to get this work. I want to be able to open any media file, avi, wma, mp4, etc.'m using Fedora 15.
View 2 Replies
View Related
Jun 15, 2009
I live in a country where 1Mbit broadband is a premium service for large businesses. I am paying a little over $40 a month for a 128k connection with monthly capping. I want to download Fedora but the download is just huge for my connection, especially as it is used for work 14 hours a day. I have attempted the LiveCD and got the 'ext4 cannot be used for boot' error. I also have several other specialised distros on this machine and it's going to be a pain inserting a new boot partition just for Fedora.
Like it is possible with Slackware, can I just download the first CD of the Fedora 11 set and get a minimal install from this or does Fedora need the whole set of disks? Is there a simple enough net install option that I could use instead? I can't understand why they can't just release something like Ubuntu's alternate install CD.
View 10 Replies
View Related
Aug 25, 2010
Dell Mini 9 Netbook with Windows XP OS died. It has a 16GB SSD. I was in the middle of installing HP printer software when it shutdown unexpectedly. Then upon turning it back on it says something about a media test failure, check cable and then Operating System Not Found. I've been able to boot using Damn Small Linux using an external cd drive.
When I type 'fdisk -l' I get:
Disk /dev/hda: 15.4 GB, 15408046080 bytes
255 heads, 63 sectors/track, 1873 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/hda doesn't contain a valid partition table
My wife has lots of pictures on the drive that she would like so I took it to a couple data recovery places and they were charging anywhere from $1000 just for jpegs up to $2600 for all files retrieved. That's more than I can budget for this. So my wife accepted the fact that the pictures are gone, but I figured I might as well try what I can because we have nothing more to lose.
I thought I'd try to get a hard drive cubby and attach it through USB to a working PC, but apparently Dell's SSDs are proprietary and the design is not accommodated. I thought maybe just the partition table information got erased somehow, so I tried using gparted and it found nothing. Whenever I use cfdisk and create partitions, I quit cfdisk after writing and it still says there is no valid partition table. I have no other ideas as to what I can do.
View 1 Replies
View Related
Apr 19, 2010
I have a dell PE1750 server which would not boot up after a power failure. I am thrown to a shell for maintenance after showing an error in file system check. The server was running - Red Hat Enterprise Linux AS release 3 (Taroon). Please let me know if I can try to recover from this error by booting from the 1st CD of a higher version of linux like RHEL5. I ask this because I do not have the old media with which the system was setup. Can the use of latest OS CD cause any problem?
View 2 Replies
View Related
Nov 26, 2009
Suppose that it is not convenient to go behind a machine to have a look.So I want to use a command to show whether the cable is plugged into network card. (Media connected or not)Can ifconfig do this? Or another one?
View 2 Replies
View Related
Mar 17, 2010
I need to install the libmagick9-dev packages and am getting a failure when trying to do so:
Code:
apt-get install libmagick9-dev --fix-missing
The failure message is as follows:
[code]....
View 1 Replies
View Related
Jul 31, 2010
Anyone here installed 10.04 on Pentium III's? I have tried installs on 5 of them and have had 5 video failures. These machines all currently run various earlier Ubuntu releases (8.04, 9.04, etc). All of them have 512 M memory but video memory is 32M or less. I have installed 10.04 successfully on 2 Pentium IV's that have 128M video memory so I suspect that's the difference. Is there any trick I'm missing to get the new XRANDR working on these old P-IIIs or should I give up? What I get when bringing up 10.04 from live CD is just a black screen... as 10.04 appears to grind to a halt or just hang.
View 4 Replies
View Related
Dec 23, 2010
Just finished trying to solve this by using other threads / Fresh install today of Ubuntu 10.10 configured as dual-boot with WIN XP. Grub loads latest kernel with no problem at all as long as the keyboard is NOT touched in any way. Touch any key and grub hangs infinitely. There is never any success in changing boot selection in any way. I tried reloading grub from the LiveCD version 10.10 with no success, then I tried reloading it from a 10.04LTS LiveCD which totally blanked grub from the boot process entirely, then I tried purging grub and downloading new code as instructed in another tutorial here on the forums. After the final effort I have restored access to 10.10 on the HDD so that I can boot without the LiveCD, but I am back to the choice-less grub! It's 10.10 or nothing! I need complete instructions on how to obtain and document the diagnostic information needed to trouble-shoot the issue so that I can provide the data you need to assist me in repairing this boot loader...When I downloaded the new code and installed it, the system recognized and properly identified all partitions and OSes on the system. I should boot from /dev/sda and the linux partition is located on /dev/sda6 the WIN partition is on /dev/sda5. I did notice some strange information concerning the starting and ending locations of the partitions when I was attempting to correct this issue. If that information seems relevant I will post it upon request. (if instructed on how to do so) Should I repost this as a bug report? (Am I posting in the wrong location?)
View 9 Replies
View Related
Mar 21, 2010
When I install either desktop version of Ubuntu 9.10 or Xubantu 9.10 it boots ok when ask to reboot at the end of the install, but will not reboot after that (2nd attempt and all after fail)On 2nd and later attempts the grub menu comes up and I choose default Ubantu and the Ubuntu circle logo displays for about 30 seconds, and most of time I see it try to access my floppy drive (sometimes the floppy drive light stays on, sometimes it does not) a cursor then blinks in the upper left hand corner for about 10 seconds and then the screen goes blank and freezes there until I power down.
My System
Dell Dimension 2350
Celeron 1.80 G Hz
768 Meg RAM
30 Gig hard drive
Note: Xubantu installs OK to HD on another system I have, but not on this Dell. To test the Dell I did install Puppy Linux with default grub loader to HD ant it works OK (boots OK to HD each time).Side note: At first I tried this Dell to set up dual boot with XP and Ubantu and same symptoms Ubantu only booting OK once and then never again so I thought it was dual boot issue so I deleted all partions (XP is now gone) with latest GParted version and attempted installing Ubuntu 9.10 and then Xubanto 9.10 on the whole harddrive but still no boot past the first time I though this might not be a grub issue since it seems to get past grub and the Ubantu circle shows for about 30 seconds before the system freezes. only a guess on my part as I don't know enough about Grub or Ubuntu to troubleshoot without help. I see I can hit "e" to get to the grub editor and I looked at the grub boot code but don't enough about it to edit for a fix. I thought about Lilo but did not see an option on the normal Xbuntu ,or even when I used the alternate install CD,for a Lilo option. Also note I can run the live CDs for Ubuntu and Xubuntu OK on this Dell. Only HD install gives me problems.
View 2 Replies
View Related
Aug 3, 2010
Running VirtualBox 3.2.6 under some host OS (should be irrelevant which one, right?), I created a machine, intending to install Fedora 13 on it. Got the Fedora 13 Live CD iso image, and an 8.6 GB virtual hard drive, completely blank. I set the machine to boot off the Live CD image. The Live CD boots nicely and I get to its desktop. I open "Install to Hard Drive"...and nothing happens. No error message, zip, nada. Inspection of the system shows a series of odd file systems, but I have no clue what they are for and whether they're usable or not.
The sticky [URL] mentions that the blank virtual hard disk should be partitioned and formatted beforehand...So I did, using the Live CD's Disk Utility (Applications: System Tools: Disk Utility). Although the sticky states the small /boot partition should be ext2 or ext3, the Live CD installer proposes to reformat it as ext4. Shouldn't we have formatted it as ext4 right away, then? Also, the installer set the /boot partition's size to 524 MB, not 200 MB as recommended by the sticky.
OBSERVATION: This was not easy because VirtualBox sets the display to 800x600 at most, and the Disk Utility spills beyond those confines WITHOUT PROVIDING SLIDERS. It was sheer luck that the required buttons (create partition, format partition) were barely reachable (at the bottom edge of the screen). This is a serious problem, because increasing the VirtualBox display size can only be done *after* installation (see for instance[URL] - since this guest addition requires rebooting the guest OS, it probably won't stick to the Live CD).
Once those two partitions are prepared and the virtual machine rebooted, "Install to Hard Drive" works as expected.
OBSERVATION: It is absolutely inexcusable that the Live CD installer (Anaconda?) does not propose to do this partitioning and formatting for the user. It is even more inexcusable that it should fail without giving any feedback whatsoever to the user.
Aside: VirtualBox's guest additions does not work correctly (for 3.2.6 anyway). The Devices: Install Guest Additions menu merely mounts a CD image VBOXADDITIONS_3.2.6_63112) without any feedback (expected feedback because the menu ends with an ellipsis). The CD, once opened, has an Open Autorun Prompt button...which fails to do anything. Manually running autorun.sh also fails. I had to manually invoke VBoxLinuxAdditions-x86.run from a terminal to get anywhere. Even then I was unable to go higher than 1024x768.
View 6 Replies
View Related
Feb 8, 2010
I was recently given an old laptop that runs Windows XP. Obviously, I want to put Ubuntu on it instead. However, the laptop is so old that it does not have a working USB connection; nor does it have a CD tray. I am aware of using Wubi to install an Ubuntu system within Windows, but I was wondering if there were any ways to install a clean Ubuntu system right onto the hard drive, without Windows being required. Or, perhaps, does Wubi have some feature to allow full-drive installation?
View 6 Replies
View Related
Jun 10, 2011
I don't have any CD's, my USB stick is missing and I don't want to have a WUBI-retarded system. I saw something about a 'frugal install' but can I move from it to an actual install, and how?
View 9 Replies
View Related
Aug 26, 2011
Is there any way to use apt-get to install software on /media/usb or some place like that, instead of the root fs?
View 2 Replies
View Related
Jan 5, 2011
I just installed the lenny (amd64) on my new core i7 870 computer (with netinst), but the kernel failure message appeared everytime I booted into gnome. I don't know how to solve this problem. Sorry I don't have much experience with installing linux, though I have been its user for a few years.
View 4 Replies
View Related
