Ubuntu :: Successful Installation Of 32-bit 10.10 / But Can't Perform Updates
Feb 24, 2011
I just installed Ubuntu 10.10 32-bit on my laptop and successfully completed the installation. However, I attempted to install the recommended updates but have been unsuccessful. The updates downloaded just fine, but when I attempt to install the downloaded updates, I get a package operation failed with the following text: installArchives() failed: Extracting templates from packages: 10% Extracting templates from packages: 21% Extracting templates from packages: 32% Extracting templates from packages: 43% Extracting templates from packages: 54% Extracting templates from packages: 65% Extracting templates from packages: 76% Extracting templates from packages: 87% Extracting templates from packages: 98% Extracting templates from packages: 100% Preconfiguring packages.
View 2 Replies
ADVERTISEMENT
May 6, 2010
what the odds are of successfully installing from 9.10 to 10.04 without something nasty happening?
View 7 Replies
View Related
Jan 22, 2010
I had installed ns-2.33 on ubuntu 9.04 using synaptic package manager. Now i need to edit routing protocol file in the Ns 2 folder. Wheni search for that file its not available but the installation is successfull.
View 2 Replies
View Related
Jan 30, 2010
I installed ubuntu on my v13 (SU7300 model, not the ubuntu model) using unetbootin.Installation was successful, but when I restart, the boot loader only gives me the option of starting Windows.I can still use unetbootin until I start windows and uninstall it. After that, if I restart, the only OS option to boot from is Windows.
NOTE: I installed 9.10 using frugal more (no cd, no usb, but rather live from hard drive.)
View 1 Replies
View Related
Feb 17, 2010
Problem: Ubuntu freezes up 30 seconds or so after a successful login.
Background:I am running a Compaq Presario SR5030NX. It has had issues for a while with running Ubuntu properly. My computer suffers from this bug. I have managed to get the LiveCD running by adding the following to my boot parameters:
Code:
vga=792 i915.modeset=0
When I was running the LiveCD I found that it would freeze after about 30 seconds. I solved this problem by again changing the boot options. This time I:Press F6
Check noapic, nolapic, and pci=noacpi
I then proceeded to install Ubuntu.
My problem arose when Ubuntu did not modify grub.cfg to match the setting I needed in order to boot. I managed to modify in some of the settings correctly, I believe at least, but not all of them.
In its current state Ubuntu is able to boot, but freezes 30 seconds or so after a successful login. If I do not graphically login, I do still have access to VTY1-6. The machine does not freeze until a successful graphical login has been made.
Below is the relevant section of my grub.cfg:
Code:
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,2)
code....
On another note:
The liveCD I have been running for 6 months is BackTrack 3 Final. Which does not have this issue at all. I would wager a guess that BackTrack 4 does though as it is based off Ubuntu instead of Slax.
View 2 Replies
View Related
Oct 12, 2010
I am unable to recollect a successful installation on it. I do remember trying to install. I also see a strange & small 4GB partition which Windows shows to be 3GB full with Windows itself occupying about 1GB. Although, on PC boot-up, no dual-boot option appears.Can I assume a dormant Ubuntu installation on this partition?
View 4 Replies
View Related
Dec 12, 2010
Last week, something I did blew away my Windows boot partition and, until Dell shipped me the installation disk (why didn't they send it with the machine? That's another issue.) I was forced to work from the Ubuntu live disk. After using
Code:
bootrec.exe /fixboot
bootrec.exe /fixmbr
[code]....
View 4 Replies
View Related
Jan 5, 2011
I ran 'sudo apt-get install python', which completed successfully. According to [url, this should have created the directory /usr/lib/python2.6, but I do not see any such directory.
This is causing problems:
I've tried 'apt-get purge python' and then reinstalling but this has not resolved the issue.
View 2 Replies
View Related
Jun 9, 2011
I upgraded one of my Squeeze installations to Wheezy, but after selecting it in grub, nothing is displayed on screen: no CLI and no GUI. I tried Ctrl + Alt + F[1-7] and I got nothing. My laptop is Acer Aspire 7715Z. I am attributing this to module as there seems to be disk activity, but without a screen, I cannot be certain.
View 14 Replies
View Related
Jan 19, 2010
I hit some trouble upgrading from FC 10 to FC 12 using the netinst CD. I had previously successfully upgraded the system from FC5 to FC10 with the same method - that time everything went well. At first the upgrade went well - the installation program found my FC installation and detected the partitions right. The problem appeared when about 90% of the rpm's were installed. Anaconda was complaining about a fatal error with a package and quit.
After rebooting and restarting the installation program it does not recognize my partitions anymore and suggests I'd format them for a fresh installation. As all my data is there I'd rather not do that. I then rebooted again and chose "Repair" from the installation menu. I got to the console and noticed that all partitions mounted cleanly and all the data seems to be there. Trying to reboot from the hard disk almost works. The system gets up, goes through grub, gets the kernel running and mounts the disks but fails to launch Xorg.
I get to a terminal login from here by pressing Ctrl+Alt+F2. When I type the user name and press enter the terminal seems to crash - does not ask for the password but simply returns to the user name query. An error message flashes just after pressing enter but too quickly for me to read. When I boot from CD again and go to the terminal via the "Repair" option the previous events can be seen from /var/log/messages. Xorg tries to start and stops trying after a certain amount of failures. After that it says this:
Code:
init: prefdm main process (2123) terminated with status 1
init: prefdm main process ended, respawning
init: prefdm respawning too fast,stopped
[code]....
My best guess is that this happens because the upgrade was aborted before it completed and hence some necessary rpm's were left out. I figured I could possibly fix this by updating the packages with yum from the terminal if I got to log in. What should I do now? Could I for example try and manually copy some missing files to the disk as I can access it via the repair option?
View 12 Replies
View Related
Feb 6, 2011
I don't understand why after a successful installation of RHEL 5.3 in my PC (dual-boot with Windows XP x64), the hard disk just reads continously and my monitor.just went blackout. This happens (3x) everytime I setup it for the first time, re:detection of hardware,network, creation of a new user, etc. Although my GRUB is working perfectly.
View 1 Replies
View Related
Mar 24, 2011
For some reason Update Manager is not installing updates as of yesterday.I have it set to check daily and notify if updates are available. It has been working without issues for well over a year now.
Update Manager tells me updates are available and presents the list of security, recommended, and other updates. All are selected to update, but when I select Install Updates in Update Manager it returns with a Reading Package Information window overlaid on the main Update Manager window - building dependency tree then reading state information and dumps me back to the main Update Manager window without performing any update actions.
View 2 Replies
View Related
Jan 30, 2011
I've recently made an NIS installation which worked out fine until I changed some hostname configurations incorrectly and found myself in a big mess. I decided to simply start from scratch seeing as how the entire installation process takes but minutes, however, when trying to run ypinit to run the Makefile I found that /var/lib/ypinit is no longer there. So far I've tried removing the ypserv, ypbind, and yp-tools rpm packages and re-intalling them via yum.
View 2 Replies
View Related
Nov 24, 2015
System is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.
This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).
My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.
Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.
View 6 Replies
View Related
May 13, 2010
i use synaptic manager to get the updates. I tried to get the required plugins like gstreamer 0.10 plugins bad. I downloads the all the required files but at last it show the following
E: Internal Error, Could not perform immediate configuration (2) on mountall
View 1 Replies
View Related
Sep 12, 2014
I installed Debian Jessie (netinst, daily snapshot) on my Acer Aspire V5-123 laptop in the UEFI mode with the secure boot turned off. everything (network, hardware, partitioning, ...) went smoothly to the last step, but after removing the boot media (USB stick) and rebooting, the firmware could not find the boot device ! The only thing I can think of, is that the EFI boot is not set up properly by Debian installer, but I don't know how to fix it.
View 11 Replies
View Related
Aug 18, 2010
I installed Debian Squeeze-testing weekly build today, with CD1 alone. It took 1 Hour 38 minutes to install and configure on my Pentium 4 2.7 Ghz , 1GB ram HP machine. I have some trouble with the installation. Sometimes the desktop just freezes while moving Icons, or opening Xterm. I cannot use Ctrl-Alt-Backspace, OR Ctrl-Alt-Delete keys. I have to physically reboot. Why doesn't Ctrl-Alt-Backspace work on GNOME? Is there a IRC chat for Debian Help and what applications does one use on GNOME for IRC chat?
View 5 Replies
View Related
Jul 6, 2010
I have been having trouble installing packages. Every package I try to install gives me the same error - Quote: E: Could not perform immediate configuration on 'libattr1'.Please see man 5 apt.conf under APT::Immediate-Configure for details. (2)
I have tried Synaptic, the Update Manager, apt-get, and aptitude. I noticed that someone has filed a bug report on launchpad (link), for seemingly the same reason, and so far there hasn't been any changes made.
View 3 Replies
View Related
Nov 28, 2010
i recently got a server and it was going fantastically well, but just recently when i tried installing something using apt-get install .... ( i tried irssi, firefox/iceweseal, tightvncserver) it downloads asks for a questions i press y for yess then i get this error E: Internal Error, Could not perform immediate configuration (2) on mountall and then it doesnt install, this is really frustrating.
View 9 Replies
View Related
Aug 27, 2011
Last night I downloaded the iso for the full DVD install with the intention of installing it from the hard drive. Since my old Fedora Core 2 system is down right now I have the iso on my MacBook.How do I perform the 256 check sum on the MacBook? I tried the shasum -a 256 but I'm not sure it's doing the right thing.
View 1 Replies
View Related
Feb 15, 2010
Can one perform an installation of CentOS 5 (5.4) so that the system is up-to-date at the time of the first boot (i.e. Anaconda will pull and install the 'latest' versions of the packages directly, and the user needn't run `yum update` | `yum upgrade` after the system has been installed)?
If this is doable at all, is it possible to accomplish without making use of a personally custom-crafted-and-hosted repository (i.e. can one of the official CentOS mirrors be used)?
Also, I'm not talking about creating an install DVD containing the latest versions of the packages, but rather, if the netinstall media can be used to perform this particular type of installation.
View 2 Replies
View Related
Oct 13, 2010
Everything works well when executing:
Code:
sudo apt-get update
sudo apt-get upgrade
When executingsudo apt-get dist-upgrade
I get this
[Code]...
View 1 Replies
View Related
Nov 1, 2010
I upgraded my main workstation from 10.4 to 10.10 yesterday and was a little concerned that a kept seeing the upgrade software perform the same step of generating grub.cfg over and over. I went back to the logs and I counted nine (9!) repetitions of this same task
View 4 Replies
View Related
Dec 28, 2010
I'm trying to figure out how to perform a minimal install to a USB attached hard drive. A full install works just fine, when I start the install from the LiveCD desktop, all the USB drives are visible and can be installed to. In the minimal install, the requisite kernel modules for USB storage don't seem to be loaded, therefore, my USB hard drive is not visible and cannot be mounted, partitioned, or installed to.
The reason behind this is I'm trying to build an XBMC install on a USB hard drive and want only the minimum backend OS that's necessary as some of the Ubuntu desktop software causes issues with some of the XBMC software. I've posted on the XBMC boards about this, but my questions have gone completely unanswered,
View 8 Replies
View Related
Jan 8, 2010
Could not download all repository indexes.The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct.and therefore i am unable to perform many tasks.this is a clean install of 9.10 on a brand new laptop
View 5 Replies
View Related
Oct 23, 2010
I would like to create an unattended install ubuntu 10.10 cd. I have followed the ubuntu [URL].. on creating the preseed file, however, I can't find any useful tutorial on how to set the kernel parameters to perform an unattended install using my preseed file.
View 1 Replies
View Related
Oct 25, 2010
I want to install Ubuntu but not as Dual-Boot (Other OS is Windows XP x64 edition).
Does Wubi perform significantly better than an Ubuntu version installed on VMWare or VirtualBox?
My computer has:Intel Core2 Quad Q8200 @ 2.33GHz. 4GB RAM. An almost empty 450GB HD (defragmented)
View 5 Replies
View Related
Jul 14, 2011
I added a code into terminal and restarted, then I tried to install Java and this came up.'There seems to be a programming error in aptdaemon. This is the software that allows you to install/remove software and to perform other package management related tasks.'
PHP Code:
Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 961, in simulate
[code]....
View 1 Replies
View Related
Aug 30, 2010
Well successful in that it told me so.However, after okaying a restart, and the disc being ejected I am now looking at a frozen screen (there was more than one but they went by so fast I don't know how many) filled with the like of:[ 1095.nnnnnn] end_request: I/O error, dev sr0, sector nnnnnnthe last of the first nnnnnn's is 865443, and of the other 505072, this being consistently repeated 3 times.The machine is an Acer Aspire, supposedly dual boot with Win 7.
View 3 Replies
View Related
Aug 7, 2011
I am trying to run VirtualBox on Ubuntu 11.04 Natty, and when I make a virtual machine it says it is successful. However when I try to run the machine I get this error box. What did I do wrong? What can I do to fix this? I've deleted the virtual machine and made a new one. I've uninstalled and reinstalled virtualbox but nothing I've tried works.
View 9 Replies
View Related
