Ubuntu :: When Start The Computer The Resolution Is 900x600 And It Is Panning The 1024x768?

Feb 11, 2011

I use a CRT screen and my graphics card is able to handle 1024x768 but sometimes when I start the computer the resolution is 900x600 and it is panning the 1024x768. I am currently running 800x600 but the low resolution is starting to get on my nerves. Also some programs(mostly games) require a resolution of at least 1024x758.

View 5 Replies


ADVERTISEMENT

Ubuntu :: 10.04 Will No Longer Start With 1024x768 Resolution

Dec 1, 2010

after the latest kernel update (2.6.32-26), my computer will no longer start up with a screen resolution higher than 800x600. Before this update, my computer would sometimes startup with this problem, but this could usually be fixed with a restart (or two if necessary). At this resolution the panels and a lot of tool-bars will not display properly, so I am limited as to what I can do using the GUI. my video card is an S3 unichrome (I think. It is built-in to the motherboard so I don't know for certain) my screen is an old ctr one I am running Ubuntu 10.04 on the 2.6.32-26 kernel.

View 3 Replies View Related

Debian Multimedia :: Xorg Not Showing (1024x768) Resolution Of Computer

May 3, 2015

I'm now working to install Debian 8 on another computer since yesterday. Another Linux, and as always, endless list of problems.

- A computer that was freezing at every installation attempt (but never at the same moment) during installation when the Broacom cardbus adapter was connected (it's a chance that it is easy to remove and I found it quickly... and it is working once installation is finished)

- Turning to sleep mode after 15 seconds if I don't quickly try to login

- BOINC receive no work

- Tray icons are here but invisible - no icons, just gray space

- xserver-xorg-video-savage is installed, but I have resolution problems, and weird glittering horizontal lines when the computer is working (as on my other PC with the SiS video card).

On Debian 7.8, it was working fine for having the 1024x768 native resolution of this laptop screen.

But, with debian 8, the max resolution is now "800x600" and with this screen, there is no smooth effect : the image is a disaster.

Here is "lspci -nn" :

Code: Select all00:00.0 Host bridge [0600]: VIA Technologies, Inc. P/KN266 Host Bridge [1106:3156]
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] [1106:b091]
00:0a.0 CardBus bridge [0607]: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller [1217:6972]
00:0c.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026]
00:10.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80)

[Code] ....

How to confirm that my Video card is included into xserver-xorg-video-savage package ? How do I know if the driver is loaded ? How to modify xorg confifugration files in this modern flavour of Linux in order to force adding the 1024x768 resolution ? I already succeed into /etc/default/grub and "update-grub" for the bootloader screen but I want it too in the desktop environment.

View 7 Replies View Related

Ubuntu :: Resolution Randomly Sets To Either 1024x768 Or 800x600 - Permanently Set A Resolution?

Dec 26, 2010

Barebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?

View 1 Replies View Related

Ubuntu :: Actual Resolution Is Only 1024x768 - Can't Get The Native Resolution (1280x1024)

Apr 5, 2011

I'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.

View 2 Replies View Related

Ubuntu :: No Resolution Above 1024x768?

Mar 10, 2011

Well i have HP D2832. A very old CRT Monitor from HP which have resolutions supported upto 1300 one but i can't get the resolutions after 1024x768. I want to get 1152x864 and cannot work to get it show in Monitors Panel.

In monitors panel it shows: Monitor: Unknown.

View 3 Replies View Related

Ubuntu :: Change Resolution From 800x600 To 1024x768?

Mar 11, 2010

change my resolution from 800x600 to 1024x768..since the latter option is not available in my display settings?

View 1 Replies View Related

Ubuntu Installation :: Change Resolution To 1024x768?

Aug 12, 2010

I'm trying to use the Xubuntu-based BitDefender Rescue Disk, and having an issue. Posting in their forum didn't return anything, so I figured I should ask here next.

Using the default settings, the Rescue Disk starts in 800x600 and complains that the resolution is too low to run the app in graphic mode.

FYI, this servers + monitor run Windows just fine in 1024x768 @ 75Hz, and even higher.

I tried adding "screen=1024x768" to the command-line, to no avail.

FWIW, the default includes "vga=791" but I don't know what it means.

If someone had the same issue, how can I set the resolution to something higher so I can run BitDefender in graphic mode?

View 5 Replies View Related

Ubuntu :: 10.04 Can't Change Video Resolution To 1024x768?

Aug 22, 2010

I can't change the video resolution for Intel 82740 (i740) video card.I'm new to Ubuntu 10.04, as I've just installed it and I have a problem with video settings.I can't change video resolution for my video adapter. I can only choose between 800x600, 640x480,400x300... not 1024x768 for example.No restricted or proprietary drivers...I used Knoppix 5.1.1 Live CD and it automatically set the resolution to 1024x768.I also used Puppy linux 5.1 Live CD and it had a configuration program which also utilised 1024x768.If these versions of linux can utilise the 1024x768 resolution, why can't Ubuntu 10.04

View 9 Replies View Related

OpenSUSE :: 1024x768 Resolution Not Getting Permanent In Kde?

Sep 5, 2010

I cannot get 1024x768 resolution permanently in my screen. When i go and adjust it in the kde personalize setting in the display menu everything seems to work. But after i reboot the system, the resolution again changes. Then i have to again configure it to 1024x768. Also i cannot find sax in openSUSE 11.3.

View 7 Replies View Related

Fedora :: Setting Resolution To 1024x768?

Feb 14, 2010

FC12-x86_64/KDE I want to set my resolution to 1024x768 using Intel Video adapter using the the i915 kernel module.

Putting the line below in /boot/grub/menu.lst on the kernel line after

rhgb quiet i915.modeset=1 vga=318

Is this the correct setting ?

I don't want to use a xorg.conf file.

View 1 Replies View Related

Slackware :: 13.1 : Resolution Limited To 1024x768?

Jun 4, 2010

Can't make Slack 13.1 to run at more than 1024x768. No problems where with 12.0-13.0. Here are portions of my xorg.conf and Xorg.0.log:

Code:

Section "Monitor"
HorizSync 31 - 81
VertRefresh 56 - 75
Section "Device"

[code]....

Note the last line marked (**) - "from config file", but I only have 1280x1024 there ! And what does that mean

(II) NV(0): Using fuzzy aspect match for initial modes
(II) NV(0): Output VGA2 using initial mode 1024x768
(--) NV(0): Virtual size is 1024x1024 (pitch 1024)

And KDE/Display only offers up to 1024x768 too. Didn't try NVIDIA driver yet but 13.0 had no problems with the same monitor,similar Card and nv driver.

View 3 Replies View Related

Ubuntu Multimedia :: Screen Resolution: Stuck At 1024x768 W/10.04?

May 21, 2010

I installed 10.04 on my former windows box last night, and I seem to be stuck at a screen resolution of 1024x768. I have a Geforce 7600 GT graphics card, and I installed current drivers via the hardware drivers option. I can't go above this resolution in the nvidia x-server settings, and even xrandr says the highest resolution I can use is 1024x768. What is up with that, and how can I change it?

View 1 Replies View Related

Ubuntu :: Get Resolution To Be 1024x768 On Toshiba Satellite Laptop

Jul 3, 2010

I have recently installed Ubuntu on my Toshiba Satellite A25-S207 Laptop. Everything runs great except that the resolution will not go above 800x600. I had this problem before on the same laptop and was able to fix it but cannot find the fix now (I had to wipe my laptop clean in order to remove some pesky Windows partitions and reinstall Ubuntu) I have found several "fixes" but none work. I tried the one below as well as it applies almost perfectly to my problem

"I just installed the latest ubuntu 10.04 on a Toshiba-Tecra having "Trident Microsystems Cyberblade XP4m32" Monitor. After install resolution is defaulted to 800x600. I followed a method advised in some threads (arount xrandr and cvt) to increase the size (my laptop works with 1024x768 under XP). This was done OK and I obtained the resolution 1024X768 appearing in the drop list resolution options of the Monitor preferences but when I select the option if fails. Alternatively, when I execute $ xrandr --output default --mode 1024x768_60.00 i got the message "xrandr : screen cannot be larger than 800x600 (desired size 1024X76

I also saw a possible fix proposing to add "HorizSync 31.50-48.00" in Xorg.conf but I then I DO NOT have such a file in my /etc/x11/ after ubuntu install (supposing that this will fix my problem !!!)

Boot into recovery mode, when you get to the command line type:

sudo Xorg -configurewhich will create a default /etc/X11/xorg.conf file. Add the lines:
HorizSync 31.0 - 70.0
VertRefresh 40.0 - 75.0to the Monitor section then reboot."

However when I entered the "sudo Xorg -configure" line my computer spit back saying that "sudo" is not an acceptable command

View 9 Replies View Related

Debian :: Can't Get Higher Resolution Than 1024x768 (NVIDIA)

Aug 26, 2015

I installed Debian 8 Jessie with the GNOME 3 desktop environment and I couldn't get pass the login screen after several reboots. Since I read that NVIDIA graphics are problematic, I decided to reinstall the system but selected Mate desktop, which appears to be less graphic intensive than GNOME 3. It worked. However, I can't get a higher resolution than 1024x768 (In Windows I could). The Mate settings in the "System → Preferences → Monitors" does not show higher resolutions.

The information of the graphics card is this:

Code: Select all00:0d.0 VGA compatible controller [0300]: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] [10de:03d0] (rev a2)

Before I try to install proprietary drivers as instructed in [URL] ...., I'd like to see if there's anything to try first with the default stuff installed by the system, because that page says:

As of jessie, the need for the proprietary drivers is pretty much over - nouveau now works quite well and works with dual-headed displays by simple and easy configuring from within your desktop(for KDE see System_Settings/Hardware/Display_and_Monitor/Display_Configuration) . The proprietary drivers don't provide normal logging and can be a hidden source of problems.

View 7 Replies View Related

Debian Multimedia :: Getting 1024x768 Screen Resolution

Sep 3, 2010

I've googled the issue and had a little luck, though I can't seem to change my xorg.conf file because permissions are defailed. This is the example xorg.conf file I wrote based upon my original and the modifications:

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.

[Code].....

View 13 Replies View Related

Fedora Installation :: Screen Resolution Cannot Be Set To 1024x768

Jan 14, 2009

I am using Mercury p4VM800 mother Board and Intel PIV 2 GHz Processor. I have installed the fedora 10 Today. My screen resolution was automatically set to 650x480 and this is the only option available in graphical mode. I am not able to increase the resolution to 1024x768. I once again reinstalled the F10. during the installation, in the boot: option I have entered 'linux resolution=1024x768', but it won't work.

View 4 Replies View Related

Fedora Installation :: Change The Resolution To 1024x768?

Mar 25, 2009

I'm still on GNOME with 800x600 resolution but I can't switch to 1024x768 because there is no 1024x768 option under resolution settings.My monitor is 17" so 1024x768 should work fine.My graphic card is integrated GeForce 6150.

View 6 Replies View Related

Fedora :: Cannot Change Resolution Higher Than 1024x768

Nov 4, 2010

I have ati radeon 9600x series card. Cannot change resolution higher than 1024x768.

View 3 Replies View Related

Fedora Hardware :: Can't Set The Resolution Higher Than 1024x768

Dec 27, 2010

My graphics card just died so I bought a Radeon HD 4350. My monitor is an Acer AL1916W whose default resolution is 1440x900. So I reinstalled Fedora 14 with KDE but I can't set the resolution higher than 1024x768 because that is the highest available.

Code:
[corneliu@localhost ~]$ lspci
00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 200 Host Bridge (rev 01)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:11.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)

[Code].....

I rebooted but still no dice. I saw a video on ..... using a graphical tool to modify the monitor settings but it seemed to be a Gtk application and I rather not use Gnome applications in KDE (not that I don't like Gnome, but I don't like to mix applications).

View 14 Replies View Related

OpenSUSE :: Cannot Set Screen Resolution 1024x768 Permanently

Oct 19, 2010

Can't set screen resolution 1024x768 permanently. There is no tools like sax2 which is in openSUSE 11.2. I am to set screen resolution to 1024x768 every time after loggin in.

View 3 Replies View Related

OpenSUSE Install :: 11.4 Max Resolution 1024x768 - How To Raise It

Mar 13, 2011

I just installed 11.4 x64.I have already updated and installed the nvidia 260.19.36 driver via the nvidia repository. The video card is a GEforce 6200.The problem is the highest resolution it will allow is 1024x768.With the same hardware in 11.3 it was running 1920x1200. How can I get that back?

View 9 Replies View Related

Fedora :: Get Higher Video Resolution Than 1024x768 In 13?

Jun 27, 2010

It's an HP DX2300 running Fedora 13, I think it has NVidea chipset, my other computer is similar machine running Redhat 5.5 and it does 1680x1050 with the same monitor.

View 15 Replies View Related

Hardware :: Fedora 14 Max Resolution - Cannot Get Past 1024x768

Apr 16, 2011

I've just installed Fedora 14. When i try to change the resolution i cannot get past 1024x768. My graphics card is the onboard Intel g41 express chipset which is - for sure -capable of bringing a higher resolution than this. I googled on this and found that i have to edit the xorg.conf file to add the required resolution mode with no luck. Moreover, I learned that Fedora has dropped the xorg.conf usage since the 10th release, which further implies that there should be a more elegant solution than editing this file. Is is a drivers problem? i searched for a linux drivers for this card with no luck.

View 2 Replies View Related

General :: Resolution Will Never Stretch Past 1024x768

Jul 7, 2011

So I have a resolution problem. Before posting here, I've checked many MANY forums for similar issues, handpicking certain techniques and trying each. Sometimes they worked, and then my problem came back.

Distro: Fedora 14
Monitor: emachines 18.5" E181HV
GPU: Nvidia GeForce 8800GT
resolution: 1360x768

My problem is that the resolution will never stretch past 1024x768. I have the image of my desktop in the middle part of the screen, with black sections on either side. Here is a list of things that I've already done or tried:

Install Nvidia drivers
disable Nouveau via grub.conf
use xrandr to modify xorg.conf and add the resolution
different cable
different DVI converter

One day, I logged into my Fedora boot, and after a week of frustration, the issue decided to fix itself. So I continued on, using Fedora and planning on a permanent switch from Windows. I log back over to Windows to play some games and whatnot (I'm not a fan of how Wine handles some games). I then log back to Fedora, and the issue is back. The resolution is messed up again.I've since removed that partition from my drive, as I've reached my wits end with troubleshooting. My linux expert friend tells me it may be that my monitor is just not good enough, or is not sending/receiving the proper EID signature, thus will not accept the resolution, or something along those lines.

View 1 Replies View Related

General :: Set The Default Resolution To Be 1024x768 When Use Rdesktop?

Apr 5, 2011

I like to use rdesktop at resolution 1024x768. But without adding the parameter "-g 1024x768", it always connects me via 800x600. Is there a way to change the default value to be 1024x768 so I don't have to keep telling the system?

View 1 Replies View Related

Debian Configuration :: Nouveau: Resolution Re-ducted To 1024x768?

Oct 28, 2010

Motherboard: M2N-MX with Athlon X2 3600 from 2006 onwards
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
Kernel: Debian Sid with 2.6.32-5-amd64 and custom 2.6.36-rc7
Monitor: Samsung 712N, 17inch, with native 1280x1024 resolution

Everything was fine with both kernels with custom 1280x1024 resolution upto yesterday. But when I rebooted today, first I noticed that X stopped working. After updating xorg.conf to 1024x768, it started working . After going through the kernel log in /var/log/messages, I noticed the following differences

Yesterdays log:

nouveau 0000:00:0d.0: Detected 64MiB VRAM
nouveau 0000:00:0d.0: 64 MiB GART (aperture)
nouveau 0000:00:0d.0: Saving VGA fonts

[code]....

There is an extra "Load detected" line and the resolution got reduced from 1280x1024 to 1024x768.

View 2 Replies View Related

Debian Multimedia :: Distorted Resolution - Only Running At 1024x768 ?

Oct 1, 2010

I recently installed Debian 5.0 (Lenny) on a Dell Inspiron 1545 laptop. I have been banging my head trying to figure out why my laptop display (15.6" optimum resolution 1366x768) is only running at 1024x768. This was not a problem in Ubuntu even as far back as 8.10 (Intrepid Ibex) which came pre-installed.

I am running kernel 2.6.32 (from Backports) to get WiFi to work and it still hasn't remedied the video oddities.

How do I either:

1) Letterbox the 1024x768 so that it isn't distorted?

or, more preferably,

2) Display in the full 1366x768?

My video card is:
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)

I also have the xserver-xorg-video-intel driver from the stable repositories installed.

View 6 Replies View Related

OpenSUSE Hardware :: Monitor - Resolution Of The Kde Desktop Is Always The 1024x768

Jun 15, 2010

The monitor is a dell 2009 w (16:10 with around 1680x1050 IIRC) I have a fujitsu desktop with the intel core i5 CPU. the crux is the i5 has an integrated GPU. hwinfo says 'clarkdale integrated graphics controller' and yast tells me the same too, knowing the monitor model as well (with correct resolution) So we have an intel GPU ... but the resolution of the kde desktop is always the 1024x768. sax2 do not accept any other resolutions - he knows only threee, one larger at 1280x1024. But even if i try to turn it on he falls back to 1024x768. this is independed from runlevel 3 or 5. the /etx/X11/xorg.conf knows the monitor and the two modes 1024 and 1680 - but everyhwere else it seems that it is unknown, using default vesa mode... the gfx tools seem to ignore the ability of the higher resolution.

View 4 Replies View Related

Ubuntu :: When Set The Resolution To Anything Higher Than 1024x768 The Login Screen Background Is Messed Up?

Jun 19, 2010

Ubuntu 10.04. I have fglrx driver installed.. It appears when i set the resolution to anything higher than 1024x768... the login screen background is messed up to

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved