Ubuntu Installation :: Kernel That Supports Atheros Network Cards?

Mar 31, 2010

Does anyone have a kernel that supports Atheros network cards? I am using ASUS EEE PC netbooks and none of the kernels I have access to have drivers installed for the NICs. I am having issues when I try to build my own kernel and maybe someone has a precompiled one? Either that or if someone has a basic, step-by-step guide to building your own custom kernel. This is my first time building a kernel and I am kind of lost. This isn't actually for running Ubuntu I will be using it in an imaging program called FOG. I just need a kernel that will support these NICs so I am able to do some imaging.

View 5 Replies


ADVERTISEMENT

Ubuntu Installation :: Network Cards Not Detected?

Feb 16, 2011

Toshiba T110 laptop, 4 meg ram, kernel 2.6.31-14; multi boot Suse / Ubuntu / Windows; Atheros AR8132 Ethernet card; Realtek RTL8191 SE wireless card.

Installed 9.10 from an old DVD lying around - everything appeared to go ok, but no networks cards - Ethernet or wireless - were detected during the install.

(Later versions do not install - problems somewhere with video card - I need to allow multi kernel selection - but this is another issue)

Does this mean that this install is toast, or can it be saved?

View 4 Replies View Related

General :: Find Whether Any Kernel Supports 32-bit Or 64-bit Architecture?

Feb 24, 2010

Is there a command or any steps to follow?

View 3 Replies View Related

Fedora Installation :: "Error Configuring Network Interface" Halts F13 Upgrade With Atheros Card

Jun 6, 2010

After an online upgrade from f11 to f13, on rebooting the setup attempts to configure the wireless connection and fails with a not very illuminating "error configuring your network interface" notice, offering no option but to go back and try again, which of course fails again with the same error.

Wireless card is a D-link that works fine with the ath5k driver in f11.

how I can get out of this vicious cycle and proceed with booting the upgrade?

View 9 Replies View Related

Ubuntu Servers :: Two Network Cards / Can't Access Internal Network

Feb 25, 2011

I've installed Ubuntu Server 10.10 with two network cards. One for external, and one internal.My problem is that as soon as i activate eth1 (external), i can't access the server from the internal network (eth0)

With these settings i can't reach the internal network from inside.If i disable the gateway on eth1 and enable the gateway on eth0, it works.

View 6 Replies View Related

Ubuntu Servers :: Finding A Pcie X1 Network Card That Supports Tcp Offloading

Jan 18, 2010

my servers cpu gets woken up alot (acording to powertop) by eth0 when downloading files, i figured i could get a cheap pci card that supports offloading.

View 4 Replies View Related

OpenSUSE Network :: Two Network Cards With Different Settings For Internet Access

Feb 9, 2010

I have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.

Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.

View 9 Replies View Related

OpenSUSE Network :: OpenSSH Chroot Only Supports Internal-sftp?

Nov 16, 2009

Had my chroot jail all set up and working nicely in OpenSUSE 11.1, upgraded to OpenSUSE 11.2 and had to set:

Subsystem sftp internal-sftp
(which was:
Subsystem sftp /usr/lib64/ssh/sftp-server)
and:
ForceCommand internal-sftp

[Code]...

Of which with-pam is mandatory. I used prefix to put the binaries in a place that would not conflict with the standard distribution, this meant I also needed to change /etc/init.d/sshd so that it referenced the newly compiled version of sshd, and copy /etc/ssh/sshd_config to /opt/etc/sshd_config.

View 9 Replies View Related

Debian Configuration :: Network Not Work When Use 2 Network Cards

Oct 24, 2010

I'm planning to use Debian as the OS for a firewall machine, which will sit between my internet connection and the rest of my computers. Now my network is all wired, no wireless whatsoever. I'm using the onboard the motherboards cat5 socket which seems to be using the VIA rhine driver and I'm also using a 3com 100MBps card.

I can list the machine spec if you want but it's nothing special, an old Athlon 64 rig with 1gb ram and an OEM motherboard, it all seems to work ok apart from the internet doesn't' seem to work. Lenny seems to detect both cards ok and I even used the net install CD and it managed to download everything using the 3com card.

The strange thing is when I'm in Lenny, I can't seem to connect. I can ping google, but when I try and view a webpage, the browser just sits there with a while screen... Could it be that using 2 network cards is confusing Debian? Right now I've only got the modem hooked up the the 3com card, and nothing connected to the onboard network card.

View 5 Replies View Related

OpenSUSE Network :: BroadCom Network Cards Are Not Working?

Sep 4, 2010

I am using open suse 11.1 in my acer emachine laptop. Everything is okay except Network cards are not working. It says that firmware is missing or kernel problems. My network cards are Broadcom network cards. How can I fix it?

View 9 Replies View Related

Fedora Hardware :: Latest Kernel Killed WIFI ( Atheros )?

Feb 4, 2010

Last night I installed F12 x86_64 from a liveUSB in my laptop with Atheros wireless. During the install process and after the first boot I was able to surf the web connected to the wireless network (signal was good and all). After I updated the whole system, however, the wireless network is no longer available (Network Manager does not even show the Wireless interface or the network list).

Obviously a laptop without wireless is mostly worthless. What am I supposed to do to get my (perfectly working*) wireless network back?

[Code]...

View 2 Replies View Related

Debian Multimedia :: Two Sound Cards Sharing Kernel Module

Dec 5, 2014

I have an nvidia card and a motherboard with an internal sound card.

The nvidia card hogs alsa, and it's really obnoxious because I don't use hdmi for audio (or video, for that matter, crt all day)

I would normally just blacklist the module that the card is using, but I hit a hiccup...

This is the readout for the gfx card from lspci -v

Code: Select all01:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1)
   Subsystem: ASUSTeK Computer Inc. Device 84bb
   Flags: bus master, fast devsel, latency 0, IRQ 25
   Memory at fe080000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: [60] Power Management version 3
   Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
   Capabilities: [78] Express Endpoint, MSI 00
   Kernel driver in use: snd_hda_intel

And this is the readout from the motherboards internal audio card

Code: Select all00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
   Subsystem: Gigabyte Technology Co., Ltd Device a132
   Flags: bus master, slow devsel, latency 32, IRQ 16
   Memory at fe500000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: [50] Power Management version 2
   Kernel driver in use: snd_hda_intel

Since they have the same kernel module, all the internet advice is pretty much moot, because I can't figure out how to effectively shut off one without killing the other as well. Huge PITA.

View 1 Replies View Related

CentOS 5 Hardware :: Figure Out Wireless Cards Will Be Supported By The Kernel?

Jul 29, 2011

Looking at getting a new laptop for some of the guys in my office, but trying to figure out if any of these wireless cards will be supported by the kernel, hoping not to do any serious kernel hacking to get them working. The cards are

- Intel Centrino Advanced-N 6205 802.11a/b/g/n
- Intel Centrino Ultimate-N 6300 802.11a/b/g/n
- Dell Wireless 1501 802.11b/g/n
- Dell Wireless 1530 802.11a/g/n

If any one has experience with those cards being supported let me know, or if you know where i can find the drivers for them that'd rock too.

View 2 Replies View Related

Ubuntu Networking :: Atheros 2413. 9.10 Karmic WICD And Network Manager?

Mar 27, 2010

I installed 9.10 Karmic 32 bit on a laptop here that has an Atheros 2413 card in it. I could see the network and tried to connect. After 30 seconds of attempting to connect, it simply says disconnected.

Thinking network manager was to blame, I installed WICD and rebooted. I tried to connect to my network, but it came back with unable to get IP address. Okay, fine. So I check my iBook and Ubuntu work laptop both are connected fine. I tried other drivers within the WICD preferences wext, ndiswrapper, madwifi nothing worked. I power cycled the router thinking something might have been borked with my wireless but it's fine.

View 9 Replies View Related

Ubuntu Networking :: Atheros AR5001X+ Wireless Network Adapter (rev 01) Not Working

Mar 3, 2011

I have a Toshiba MX35 laptop it's a little old but does the job. I'm have a problem getting the wireless to work. I can boot a live CD either Ubuntu 10.10 or Fedora 14 and they will see the wireless card. The card is Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01).

I have Ubuntu 9.10 installed and that is the OS that is having the problem seeing the wireless. The computer will not handle Ubuntu 10.10 (at least it won't handle the desktop effects under Ubuntu 10.10) but handles them just fine under 9.10 and that's why I have 9.10 installed. I really need the Wifi to work because I'm going to travel in a few days.

View 5 Replies View Related

Ubuntu Networking :: Modify Network Cards MTU?

Apr 12, 2010

So I am looking to modify my network cards MTU (for some testing purposes), and I only know how to do it it Windows (via command prompt ping command with special flags) and not in Ubuntu.

Any easy way to figure out proper MTU numbers in Ubuntu?

View 2 Replies View Related

Ubuntu :: D-Link Network Cards Not Recognized

Feb 9, 2010

I have two D-Link network cards installed in my computer. The Ubuntu 10.04a2 installer seemed to recognize only one of them, though I know both are functional. I plugged a CAT5 cable in here, connected to my home network (with Internet). The installer proceeded happily, configuring DHCP and synchronizing clocks. However, when I rebooted after its completion, Ubuntu didn't recognize that I was connected to the network. I re-jiggled the RJ-45 connector, to no avail. When I run "System Testing," it does list both network cards during the Network suite, one being D-Link, and the other "James Bond" or something. So, what gives?

View 2 Replies View Related

OpenSUSE Network :: Drivers For Atheros Communications Inc - AR2413 802.11bg?

Jan 30, 2011

I'm trying to get WiFi up and running on an older desktop PC. lspci gives me the following information about the WiFi card: 00:0d.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01) Is there an RPM package for the driver that I need? If no, what should I do to install the driver manually? The PC in question doesn't have any other form of direct internet access. It does have an Ethernet port, but the WiFi router is too far away to hook it up to the access point directly.

View 8 Replies View Related

General :: Atheros Network Card Not Available - Eth0 No Such Device Exists

Apr 19, 2010

I have setup a dual boot machine which has OS of Windows Vista (32 Bit) / RHEL 5. The LAN Card details are - Atheros L2 Fast Ethernet 10/100 Base T - Controller. The said Network Card works fine with the ADSL Connection in Windows OS, but does not seem to initialise in Linux. When I run "ifconfig" in terminal window it gives away the prompt - "eth0 no such device exists".Although it shoes the loopback adapter (lo) device working fine. I forgot to mention over here, I have just started with Linux. So, I request "the" Linux Gurus to help me out with this one.

View 1 Replies View Related

Ubuntu Networking :: No Driver Claimed In Ndiswrapper - Atheros AR5001X+ Wireless Network Adapter?

Feb 26, 2010

I recently switched from Windows XP to a clean install Ubuntu Karmic Koala 9.10 but it seems to be quite a problem to get the wifi up and running. In Windows the nearby network all appeared in network connections but the same section in Ubuntu is empty. So I decided to go with the ndiswrapper guide to solve the problem with an unclaimed driver. After an entire day messing with my computer I'm still not close... Below follows excerpts taken from the Ndiswrapper guide with posted results from my computer. "ndiswrapper won't work until it thinks that your Windows drivers have been properly installed and that they are the appropriate ones for your wireless card. You can run the command: ndiswrapper -l"

result:

WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
net5211 : driver installed
device (168C:0013) present (alternate driver: ath5k)

So I've posted the result the name of my wireless card below: lspci -nn

Result:

00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:0259]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:1259]

[code]...

It seems like the network is disabled or unclaimed or both. What to do? I'm stuck after spending an entire day trying to install the wifi. I had no problems in Windows XP but it seems to be quite impossible in Ubuntu.

View 7 Replies View Related

Ubuntu Servers :: Dns Server Started With 2 NIC Cards - Bios Sees Both Cards But - Both Dont Show In Ifconfig

Dec 1, 2010

I have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?

View 1 Replies View Related

Debian :: Network Cards Not Recognized?

Aug 10, 2010

I just installed Debian 5.0 onto my laptop (Dell e6410) and it appears to boot and run fine, except that it does not recognize the network card (it did not do so during the installation). It also does not seem to recognize the wireless card.I have an ethernet connection, but running ifconfig displays only the local connection.I have tried adding -nomodeset and -noacpi to the boot menu, but that does not seem to change things

View 9 Replies View Related

Networking :: IP Keeps Changing Between Network Cards?

Jul 8, 2010

I have a small pc running fedora 8 with iptables and 2 network cards for routing/firewall and secondary DNS.For some time I've been alerted by the network guys that this machine was generating some alerts. The real network IP address keeps being assigned to the other interface, intended for LAN only (10.0.0.1/24).I've already changed the PC, installed a more recent operating system, replaced the 2 network cards and the problem persists. I have another pc running the same services (except DNS) in a very simillar way and no alert logs from that one.onder if it is some configuration issue on my startup firewall script.I've also installed arpwatch and I could confirm this IP and physical address issue:

Arpwatch output:
hostname: my.host.name
ip address: my.ip.address

[code]....

View 5 Replies View Related

Ubuntu Servers :: After Clean Install - Network Cards Not Installed?

Feb 10, 2010

I have a Proliant 7000 with 4 interfaces across 2 cards - 3 intel 10/100Tx and 1 intel 100FX. During install it detected the 3 tx interfaces - but couldnt see the network - post install the network devices were no longer there, their devices missing from /dev/.

Neither google nor a forum search have been particularly edifying, is this a known issue with any cards? If so is there a known fix? ifconfig gives me information for loopback only as expected.

View 1 Replies View Related

Ubuntu Networking :: Making Sure Two Network Cards Each Have The Correct IP Addresses?

Nov 2, 2010

I've got two NICs connected to two different routers, and on different subnets of course. Each is set for static IP. But somehow I must have mixed up the connections at some point, so the NICs don't always have the IP addresses I expect. I think there may also be a mixup with different ways of setting the network addresses. When I click the Network Icon on the Desktop, I see that each NIC has both addresses as options. The /etc/network/interfaces file has some information about eth0, but all commented out, so there must be another place the addresses get set. And I just discovered that eth0 and eth1 aren't physical but virtual. I guess eth0 is the first one that is set.

View 2 Replies View Related

Ubuntu Networking :: Wired / Wireless Network Cards Not Working

Nov 30, 2010

I'm new to Ubuntu - I've decided to give Ubuntu Studio a go as an alternative to Windows. However, after installing it, neither of my network cards work. I have a Intel Pro Wireless 3945ABG wireless card, and a Broadcom Netlink Gigabit Wired card. Neither work, And I'm not sure how to. I've tried searching, and have come up with the .tgz file here, but I have no idea what to do with it I'm concentrating on the wireless card for the moment, seeing as that will be the main one I use.

View 4 Replies View Related

Ubuntu Networking :: Machine Lost Controls Over Network Cards

Jan 14, 2011

I'm running xubuntu 10.04 LTS (upgraded from 8.04 LTS) on an old low power sempron machine as an always on 'internet machine' i.e. it does all my downloading email etc. and up until yesterday it has always performed flawlessly. Yesterday wasn't its fault, it was a BTI network problem that took out my internet service but while talking to tech support I realized that this machine has lost all ways to control the network cards. Network-manager and network-manager-gnome are installed according to synaptic but they have no menu or notification appearance. I've tried reinstalling them to no avail.

View 8 Replies View Related

Ubuntu :: Share The Wireless Network With Old Lap Top Via The Wired Ethernet Cards

Mar 25, 2011

I want to share the wireless connection from an Ubuntu machine with an old lap top via the wired Ethernet cards. the old laptop doesn't have wire less. the Ubuntu machine is 10.04 LTS -the Lucid Lynx.

View 1 Replies View Related

CentOS 5 Networking :: Ethernet Driver - Atheros (on Board) Is Not Shown In Network Ifconfig

Jul 7, 2011

I have installed CentOS. I have two ethernet card (one onboard and one PCI). I am able to set ip for realtek ethernet card and my atheros(on board) is not shown in network ifconfig shows only one ethernet card (PCI) hen i gave the command lspci i got the following output

01:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
03:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

View 4 Replies View Related

Networking :: Set 2 Network Cards In Bridge Mode?

Apr 7, 2010

I have installed CentOs 5.4 for Snort sensor , on the location where i intend to place the Snort sensor to listen for internal firewall leg (LAN) the switch doesn't support port mirror so i would like to create with 2 nic's bridge and pass trough the firewall internal leg my question how do i set such configuration.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved