Fedora Hardware :: Linux Wireless Card For A Laptop That Supports 5 Ghz?
Aug 3, 2011Get some recommendations for a Linux Wireless card for a laptop that supports 5 ghz?
View 2 RepliesGet some recommendations for a Linux Wireless card for a laptop that supports 5 ghz?
View 2 Replieshave Unix and Windows experience. So will need some hand-holding.Need help getting my wireless network to work on my newly installed Oracle Linux on Dell laptop.Not sure what wireless card is installed, or it's mac address (though I can boot into windows and get that info I don't want to - it'll be kind of a let down if I can't fix it all thru Linux).Install has detected a Broadcom wired card, but not the wireless. Funny thing is that it detected the Bluetooth
View 2 Replies View RelatedI am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
Found that RedHat Linux supports Context-Dependent Path Names in symbolic links using special reserved CDPN variables. Will it be possible to create a user-defined CDPN variable and use it in creating a symbolic link
View 2 Replies View RelatedI'm totally sick of my WiFi Card, a Realtek 8187 connected by miniPCIe, althought internally designed as USB, I've tried all there is, and I've decided to change it. Which brand do you guys recommend? In my experience, I want to avoid Realtek and Atheros, but which brand offer the best "out-of-the-box" experience, and less overall issues? Intel, Broadcomm, maybe another Atheros or Realtek model, or whatever you guys think it's the best choice
View 2 Replies View RelatedI have installed Scientific Linux 4.8 (based on RedHat Enterprise 4) on my old Samsung X10 laptop which previously had a working WinXP on it. Due to a broken screen connector I cannot use my laptop screen so I use a separate monitor connected via a serial link.
The linux install seemed to work fine except now when I boot up I eventually get a screen completely covered with flashing artefacts and I cannot see any desktop like environment. Although in the initial stages of the boot-up I do see white text on a black background zipping by.
I actually saw similar screen artefacts at the beginning of the installation when I chose the 'graphical install mode' (I re-started the install in 'text mode' to see it working).
I will be very pleased if someone can help me fix this as I have been wanting to get into linux for ages and this is my first plunge.
I'm on an HP Pavillion dv4-1125nr with a Broadcom BCM 4312 network card.
I only have Ubuntu 10.04 installed on this computer.
ifconfig reports:
Code:
eth0 Link encap:Ethernet HWaddr 00:1e:ec:b5:b4:85
inet addr:192.168.0.5 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21e:ecff:feb5:b485/64 Scope:Link
[Code]....
It isn't even detecting the wireless card, and the network manager will only let me connect to wired networks (I'm connected to my router via ethernet cable right now).
I've pressed the LED killswitch but it does nothing (doesn't change from orange to blue nor does it have any noticeable effect on the network manager or the reports of the above 2 commands).
I am getting obsessed with Linux OS up to the point of starting to swap MS OS.I opened WICD and it show (Wired network = 0 wired-default VVV and wireless network = C STR ESSID ENCRYPT BSSID MODE CHNL is this meaning that build in wireless card is or is not recognized? I will keep looking for info, although is hard to learn a new OS from scratch.
View 4 Replies View RelatedI'm about to install OpenSuse 11.3 gnome on my laptop with ubuntu & vista in a dualboot, and wanted to make sure that the Broadcom 4322AG wireless card would be compatible with my laptop.
View 2 Replies View RelatedI'm currently installing Slackware 13.1 on my old Sony VAIO. It's got a wireless card sticking out the side of it, and I just want to make sure I set it all up correctly. I got to the screen where it's asking:
static IP
DHCP
loopback
And I'm not sure which one to pick.
I have a Laptop PC Acer Aspire 1710 and OpenSuse 11.2 installed on it I tried to setup my wifi card but it doesn't workI checked the log system log file.Apparently the driver cannot be loaded :
<6>[ 8.556483] b43-pci-bridge 0000:03:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
<6>[ 8.560204] ssb: Sonics Silicon Backplane found on PCI device 0000:03:03.0
<6>[ 8.581966] cfg80211: Calling CRDA to update world regulatory domain
[code]...
I'm not exactly sure if this should be here and not in the Hardware & Laptops section, but seeing as my only problem is with WiFi, I'm guessing this is the right place. Under Ubuntu, my laptop (an Asus K42Ja, more details below) can see wireless networks normally. However, when I attempt to connect, it fails to establish a connection. Under Windows on the same laptop (dual boot), no problems are experienced.
According to this, there's a firmware bug in my wireless chip which causes connections to get dropped. I'm not getting connections at all, but I still tried the workarounds on that page with no luck. The router is a TP-Link TL-WR340G. My previous laptop, a really old one from 2003 running Ubuntu 9.10 was able to connect to that router without problems. The wireless card was Intel on that as well (but, of course, much older). The router is set up to use WPA for security. I didn't use WPA2 as I read something a while ago about problems with WPA2 and some Linux distros. Please correct me if I'm wrong here.
If anyone's curious, I'm posting this on Ubuntu, via an ethernet cable to the router mentioned earlier. Some tasty technical bits: dmesg (the latter half of the "timed out" messages is me retrying after double-checking the WPA key)
[Code]....
I have a problem with my Grundig's (model GNB-250D) laptop wireless card. I recently installed Ubuntu 10.10 and tried to use a wireless connection to browse the internet but it didn't detect any, it seemed strange as it worked perfectly on Windows. I can browse the internet fine if I use an Ehternet cable.
View 4 Replies View RelatedHow do you check if a computer's video card will support Kernel Mode Switching BEFORE OS installation?
In this example I have an Acer Aspire AST180-UA381B.
Manufacture website says my video card is: Integrated nVidia MCP61
[URL] ....
Nouveau code list says: NV4C (MCP61) GeForce 6150LE / nForce 400/405, GeForce 6150SE Quadro NVS 210s / nForce 430
[URL] ....
I want to know:
1. How to tell if my graphics card will support KMS before I install the OS?
2. If it does not support KMS which kernel options should be passed to get it to work properly with the nouveau driver?
3. Ultimately I am looking for a tool that should be included in the installation screen that will:
a. identify your hardware: list the hardware detected on the screen
b. highlight with color code any hardware listed that is not supported or poorly supported: in this case graphics drivers
c. perform a quick benchmark test of your hardware: In this case I want the benchmark to tell me what capabilities my graphics card has.
d. automatically recommend and set the best kernel parameters for a successful boot: if the graphics card needs nomodeset or modeset=0 or whatever I want it to do it for me.
Also I started a personal blog about this issue which I intend to compose into guide to assist others with this question. [URL] ....
My goal is to create a boot disc that will automate proper installation of graphics or other hardware for a system BEFORE installation. I would like to see this feature included in the Debian installation screen.
I recently switched from windows xp to ubuntu and have been very impressed so far. However, I've run into a bit of a problem. My laptop has a switch on the side that enables or disables the wireless card and every now and again its inevitable that someone accidentally switches it off. When I had windows xp all you had to do to re-enable it was to go to the device manager and turn it back on however ubuntu apparently doesn't have a device manager. so I need help. my wireless card info is05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
View 1 Replies View RelatedWith what command i can check whether my Ethernet card supports gigabit speed Ethernet or not?
View 1 Replies View Relatedmy servers cpu gets woken up alot (acording to powertop) by eth0 when downloading files, i figured i could get a cheap pci card that supports offloading.
View 4 Replies View RelatedI need to test network card throughput and speed between two computers, one is running Fedora and other running Windows 7. Usually I would use netperf to perform this task, however I can't find Windows build of netperf. Can anyone recommend any network evaluation tool, similar to netperf (clien/server) which has both Windows and Linux versions.
View 2 Replies View RelatedJust installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
Recently I have installed Fedora 14 on my other laptop. It's a dual boot with Windows 7. Everything worked perfectly fine, networking included, until my friend didn't accidently turned off the wireless by pressing a wireless button on the laptop. Since then the wireless on Fedora doesn't work. It does on Windows thought. I've tried restarting the laptop few times, but the wireless still doesn't want to work again.
View 2 Replies View RelatedI have a problem here with my updated kernel. I'm currently using Fedora 14 kernel 2.6.35.9-64, and my wireless card Broadcom BCM4312, which had an issue before with Linux distros, is working fine already, thanks to the kmod-wl software driver. My problem now is this, after updating to kernel 2.6.35.10-72, fedora does not boot, and I noticed that the wireless card is the only thing not activating, compared to the working kernel. And when i looked at the log of the bootup (pressed right arrow key), I saw this:
[code]...
I have a Dell inspiron 1420 and its set up as a dual boot. Windows/Fedora.I cant get the wireless card to work. I review some previous posts but still cant get it working.
I did a /sbin/lspci
Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)
I did $rpm -q b43-fwcutter
b43-fwcutter-011-3.fc9.i386
i have installed red hat 5.1 on my dell inspiron 1525 laptop.It is not detecting any ethernet card.driver is marvel yukon 88E8040So far i found this package to be installed kmod-sk98lin-PAE-10.70.7.3-2.el5.elrepo.i686.rpm but it is showing me the dependencies problems..
View 4 Replies View RelatedI have got a Laptop running Arch Linux and a Macbook. I have got a wireless network via my broadband router and get acccess both laptops remotely via ssh and sftp.I have been trying to set up NFS on both laptops with th intention of backing up one laptop to the other. I have installed the necessary file on both the laptops and have also set up the exports file as per instructions on the Arch Linux wiki.
View 3 Replies View RelatedI am trying to install Realtek RTL8192E wireless drivers for Toshiba satellite 510 in Fedora 14 KDE SPIN. I have been searching it for long time. I am not getting any tutorials or any methids to get this sorted.
View 1 Replies View RelatedI got ubuntu working fine on my netbook and wanted to play around with opensuse. I have it installed and everything works fine except my wireless connection. I have updated everything since the installation through a wired connection, that didn't help. I have read the stickies, but to be honest, I'm so new to this stuff I'm kinda lost. So my wireless network has a WEP encryption and I have entered that password as a 64 HEX Key in the Wireless Manager widget. It connects to the network and says is labeled as active, however there is still the yellow exclamation shield next to the connection. Firefox and other apps don't have access to the internet.
View 9 Replies View RelatedI have learnt that the network locked huawei modems may be unlocked to use any sim card bu getting a special unlock code and it should ask for it when a "foreign" SIM card is inserted. This procedure works well in Windows, but in Linux where I use wvdial, I dont get prompted for this unlock code. Does anyone know how to insert the unlock code in Linux using any Linux tool (GAMMU/GNOKII/Minicom etc)?
View 2 Replies View RelatedSomething has gone awry with my login. After the usual username/password prompt my laptop comes up with smart card authentication & I can't login. How do I get away from the graphical login so I can login & correct the problem?
View 3 Replies View RelatedI have two network cards in my computer (Debian). One (eth0) is connected to the router which is connected to the internet, the other one (eth1) is connected to my laptop (Gentoo). Now I want to surf the web both on my computer and on my laptop. I obeyed some tutorials "Linux as router":
1. On my Debian system IP-Forwarding is on:
Code:
takada:/home/sam# sysctl net.ipv4.ip_forward
net.ipv4.ip_forward = 1
2. Laptop has IP 192.168.0.2 and this is the output of 'cat /etc/network/interfaces' on my computer:
Code:
takada:/etc/network# cat interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
But a ping from my laptop to 192.168.1.1 (router to internet) still gives:
Code:
connect: Network is unreachable
I have a mainly windows house with a notebook running Fedora 11. The problem is that when this computer is on the wireless network it shows no computers on the network. It gives me the error that it can't retrieve the shared list from server. However when I am using it on the wired part of the same network it will see all of the other computers. I was wondering if anyone here could shed light on what might be going on. I am not sure if it is a setting on the computer or something to do with the router. However I don't think it has anything to do with the router because I have windows laptops that run on the same wireless access point and have no problem
View 7 Replies View Related