I've been dual booting 10.10(with Windows7) for about a month. Today is the first time I've encountered a serious problem.
This morning, nothing functioned properly after trying to open up several programs. The computer seemed to be "frozen", although the mouse was working fine.
I decided to reboot, but then encountered an even bigger problem. It failed to boot and got this message code...
I installed Lucid (clean) after being v. satisfied w. Karmic.
Lucid has presented problem after problem, including the most irritating one thus far: I can't boot (system disk error) unless I put the Live CD in (the Karmic version, yet) and select "boot from first disk". Once that is done the boot proceeds normally.
Is there anyway out of this? I have installed and reinstalled w/ the same problem. Should I reinstall from the Net and not the Live CD?
I am trying to install Ubuntu on my sister's computer after her Windows BSODed a few times and so I offered her a "failback" system.
The problem is however that the live cd gives a few errors like "cannot mount sth sth sth" (will edit a bit later on after i get another computer to work)
Is it possible that this problem might relate to some Windows BSODs that she experienced earlier on?
Sorry for the lack of details, I'll steal the thing from her and post more accurate details within a split of a second.
I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedProblem:
Error: no such device: f50139a2-b475-4ef5-8217-051bd145a24e.
grub rescue> _
I know it is saying that the harddrive that I installed ubuntu is missing.
Heres the story:
My friend's computer wouldnt let him boot to the CD to install Ubuntu on his computer.
So I put his harddrive into my computer as my 3'rd Harddrive and booted the CD on my Machiene and installed Ubuntu to his harddrive.
We got ubuntu to work just fine, and then I removed his harddrive from my computer... big mistake. I no longer have the harddrive that we installed ubuntu to so I cannot use any programs or anything.
What I want to do is get my Windows 7 working again. Right now I cannot do ANYTHING.
I have tried code...
I have a Dell Inspiron 1525 and I've been trying to boot into the live mode. I can get into the main 'Try Ubuntu without any changes' menu, but selecting that option causes the CD tray to spin up, followed by the head audibly flailing about for a minute or two causing the laptop to noticeably vibrate, followed by nothing. It doesn't boot or give any errors, it just stops. I can read the discs just fine in Windows.
So far I've tested shipit CDs of 9.10, 9.04 and 8.10. All cause the above problem. 8.04 works perfectly.
Today morning I was upgrading ubuntu 10.10 to 11.04. When the packages were downloading it was showing 20m left to download. At that time I had a battery of 2 hrs. As I had to go so I left my laptop on and went( the charger unplugged ). When I came back I get the following message code...
I had Widows 7 also. Thank god its fine so that I am able to ask question.
I download and burnt Ubuntu 10.04 and trying to run the Live CD. It shows up black screen after displaying the red progress dots and nothing happens after that. No CD drive activity is noticed. How can I resolve this problem? I have been troubleshooting it for days!
View 9 Replies View RelatedFirst of all, i'll just say this myself. I'm a dumbass and tried to fix somethings that wasn't even a problem from the start and now my 9.10 installation is totally fubar. There, done, now let's move on.
Ok, so I tried to delete a folder after compiling two binaries to the wrong folder and used the
Code:
rm -r
command on what I thought was the folder /home/lars/bin. And to add to the dumbass-ering, I was root while doing this. The computer hangs and leaves me with no other options than doing a hard-reset via power-button.
After rebooting I can't even see the login screen, it just hangs at the Ubuntu symbol.
So I give the recovery mode option in my grub menu a try and it gives me a bunch of lines, all looking good until I get this and the boot just stops with a blinking underscore. code...
Should I just beat myself for a while and then reinstall the OS or what...?
The hardware involved is a Asus EEEpc 1000h.
ps. I'm new to Linux and have so-far managed to get around by following guides and tips, just a heads-up.
I am able to get into GRUB and boot Linux, but whenever I select Windows, all I get is an error about a missing boot loader.
After the Windows install disk failed to repair it, I reinstalled the Windows system and then used the Ubuntu live-CD to restore GRUB in order to be able to boot into Linux again. Now I have the same problem as when I started (although the error screen is somewhat different now).
Does anyone know how to break this "evil circle" of mine?
I am using the 10.10 (GRUB 2 in other words).
Im having a serious issue with booting ubuntu 10.04, the issue being it wont boot up at all, after working so well for so long (i suspect some recent dodgy system updates are responsible) so I decided to just reinstall ubuntu from scratch again but wanted to retrieve some important files from my root device. So I am running the live desktop and I can see my previous filesystems under places but cannot mount or open my original root device where the files I want to recover are located, I receive this error msg:"Unable to mount 77 GB Filesystem.
View 2 Replies View RelatedI have installed Ubuntu 9.04 fom a Live CD. My system is a Dell Optiplex 745 that originally had Windows XP installed. Ubuntu is the only OS. Windows XP was removed.
The sytem appears to be running normaly.
When I shutdown (not restart) and then power cycle the computer, I see the Dell splash screen then I get the message: "Errorauto-sensing secondary master hard disk drive. Strike F! key to continue, F2 to run the setup." F1 repeats the message. F2 enters the BIOS setup but does not lead to a fix.
If I place the Live CD in the tray and boot from that, I get to the Ubunt install directory.
If I click "Check disc for defects", then run the check. (I can even interupt the check without completing by hitting ESC), then the system reboots.
I see the Dell Splashscreen.
I see the Ubuntu Live CD menu
I choose "Boot from first hard disk"
Then Ubuntu loads perfectly. I enter my username's passord.
The system runs fine until the next time I shutdown.
How do I get the system to boot directly without needing the LiveCD?
I am unable to boot 9.10 or 10.04 Live CDs.9.04 can boot.When attempting to boot the LiveCD/USB (I have tried both), if I attempt the basic install/start/check CD, I get a blank screen.If I use the option selection to set nomode(something) command (I will verify later, posting from work) with verbose and quiet disabled, I can get further, but can still not boot.Any ideas as to how to get a boot of of the LiveCD?
View 4 Replies View RelatedI am running a CentOS Server (v5.5 x64, with latest CentOS kernel)
The problem is that I cannot enable DMA on my boot drive. My boot drive is an IDE SSD. All my other hard drives are SATA:
/dev/hda = IDE/ATA
dev/sda - /dev/sdf = SATA
---
/dev/sda - /dev/sdd = RAID5 for storage
/dev/sde+/dev/sdf = RAID1 for storage
[Code]....
I have a serious problem! I downloaded and burnt Ubuntu 10.04 and then chose it as start up volume in Snow Leopard's start up disk preference dialogue and although Ubuntu runs successfully from the cd (I'm typing from it now) I can no longer boot into OS X at all.
I have tried all of the different short cuts at boot up to no avail, even trying 2 keyboards. It insists on looking for the Ubuntu disk and if it is not in the drive comes up with an error message stating that a system disk cannot be found.
Is there any kind of tool on Ubuntu that will let me change the start up disc/interact with the Mac's efi settings? I previously had refit installed but this disappeared just before I booted the cd, is it worth using the live cd?
I tried booting from a Tiger dvd but it wouldn't let me do so, it just returned me to the ominous "System disk not found" message.
Does anyone have any kind of idea? Perhaps some kind of shell script that will reinstall refit? I'm guessing that any kind of dvd designed for PC will prob boot, any kind of OS X recovery disk compatible with MBR available?
On a Lenovo thinkpad S12 2959 and a kingston DataTraveler 101 OK I have been having a lot of strange issues while trying to install the current 10.10 netbook version of Ubuntu.I followed the instructions right below the download for the iso.Basically download the usb live creator and use it.So I did (with no persistence set) and it seemed to work.I tried booting from it and it worked, except that I have to keep pressing keys, I used the enter key and it worked.If I stop pressing enter no progress is made.Then at the end their is some error about no persistent space being available.
and now it is booted, so I try to install a driver and it hangs.so I try to install the OS, and it hangs.So I try to exit and it finally gets to the next screen in the installation after I tell it to exit, but then hangs when trying to get the the next one and it will not continue.
Tinkered with partitions. Grub is now messed up. Unable to boot from live CD in the normal manner of just hitting f9. Want to boot from live CD. Dual booting Win7 and Ubuntu 11.04 64bit.
View 7 Replies View RelatedI want to install F12 x64 from boot.iso.
My ISP give Internet connection only by PPPoE. A problem is next.
After partitions creation installation offer me connection from eth0 device - I need ppp0 device.
Is any way to create ppp0 device, configure PPPoE connection during installation from boot.iso?
May be it is anywhere documentatons create your own boot.iso with added PPPoE ?
I don't want download full DVD F12 or LiveCD.
A few weeks ago I installed Fedora Linux 64-bit on my HP dv4-1428ca laptop which was running Windows 7. At that time I created a Live USB using the fedora-live usb tool and it booted fine. A couple days ago I decided to try out openSUSE, so I downloaded the 64-bit live-cd image and tried to create a live usb using the SUSEStudio ImageWrite provided in the documentation. The tool kept giving me an error message, so I decided to try unetbootin instead. However, when I tried to boot the live usb on my HP laptop, it presented me with the message.
"SYSLINUX 4.04 EDD 2011-04-18 COPYRIGHT (C) 1994-2011 H. PETER ANVIN ET AL" with a blinking cursor and nothing else. I've tried a variety of alternative programs for creating live USB's (pendrivelinux, linux live usb creator, unebootin), and verified the checksum of the iso file for openSUSE 11.4 64-bit, and still was not able to get past the "SYSLINUX..." message on my HP laptop. However, the live USB does boot on the other computers in my house. Interestingly, if I create a live USB using the tool provided by Fedora, it will boot fine. However the Fedora Live USB tool cannot be used for other distros.
Specs:
AMD Turion X2 Dual Core
4GB Ram
ATI Radeon 3200 Graphics
320 GB Hard Drive
I had mandriva 2009 installed in my system everything was fine till I installed a new graphics card xfx nvidia gts250. My motherboard in Intel 946giz. I was able to change it to lenny with got installed perfectly but when I boot in linux it goes into an infinite loop giving me call trace and all I tried sabayon 4 and suse11. 1 live cds but was not able to boot into their live cd environment.
View 5 Replies View RelatedIm new to linux. Im trying to install 11.4 on my desktop. When i try to run the live CD (GNOME) .. after loading the kernel, the screen with just a progressbar appears and the screen crashes, as in some parts of it goes black.. Although, i can install it perfectly, when the OS boots the same kinda screen appears and crashes My system config- intel i7-870 4 core 4GB RAM nVidia GeForce 9800GT 1GB i need to get rid of windows fast.
View 9 Replies View RelatedI cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
I would like to be able to change my BIOS setting to enable me to access a live cd or dvd to try some Linux Distros. At the moment ,when I access the BIOs ,it willl not stay as adjusted ,it ignores the settings ,it goes to default.
View 8 Replies View RelatedI have a server that NFS exports the /home directory out to other computers. On the desktop they all work great, but on a wireless laptop, this is where the problem occurs. The wireless enables after the person logs in, rendering the NFS export /home useless on the laptops.Is there anyway to have the wireless enable correctly on the boot so that NFS can mount properly at boot also?I'm using Fedora 11 (32bit) with a wireless router that has a security of WPA-PSK [TKIP] + WPA2-PSK [AES]. I could switch to some of the older versions if necessary to get this working.
View 5 Replies View RelatedI have tried to install ubuntu on my hp server ml350 m6 i have more than 25 times
but this error is coming when select install
busybox v1.1.3
(initramfs)
When I put a DVD in my DVD drive I cannot get Ubuntu to play it, not with VLC, Enna, Boxee or Movie Player, with movie player I get "An Error Occurred Could not open location; you might not have permission to open the file."
With VLC I get some very slow jerky playback that crashes when I go full screen.
Since two days i am unable to add a ppa in my software sources.i have tried by both ways(terminal and directly) but this error shows up..code...
View 7 Replies View RelatedUnable to update Code...
View 3 Replies View RelatedI recently installed meerkat; when I try to start gdm from the terminal window with code...
View 6 Replies View RelatedHas anyone else since today been unable to connect to msn?
View 4 Replies View Related