Fedora Installation :: Total Lack Of Sound With F13?
May 27, 2010
Just installed fedora 13. Everything is great except for the total lack of sound. I'm trying to use the onboard audio. Motherboard is asus M4A89TD. In alsamixer all of my devices are turned on to max.
Code:
$ lspci | grep Audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
05:00.1 Audio device: ATI Technologies Inc HD48x0 audio
Code:
$ lsmod
Module Size Used by
tcp_lp 2055 0
fuse 54749 4
ipt_MASQUERADE 2208 1
iptable_nat 5420 1
nf_nat 19059 2 ipt_MASQUERADE,iptable_nat .....
When I open pavucontrol, under output devices it lists 'HDA ATI HDMI Digital Stereo (HDMI)' and 'Internal Audio Analog Stereo'. I think the correct device needs to be the the ATI SB one, but is missing from the list.
View 14 Replies
ADVERTISEMENT
May 30, 2010
I'm using a HP 7100 laptop and have tried installing the latest versions of Suse, Mandriva, as well as Slakware and have repeatedly been faced with two problems: .1. No Sound: Research via the web suggests that the lack of sound MAY BE due to the particular HP laptop model but there is a doubt here. Sound does work with the Winow$ 7 software but it does not work with any of the above noted Linux softwares. Are any of you familiar with this? .2. KPPP: Are any of you using KPPP with the latest version of Fedora, using KDE4? If so, how did you get it to work?
View 1 Replies
View Related
Feb 22, 2011
I was minding my own business watching loombo and just like that the sound cut out. so I was like okay I will watch it on mega video and no such look no sound there too so I checked my ..... and that wont even load videos.so !I'm running the latest version of ubuntu on my dell insperon laptop if this helps
View 3 Replies
View Related
Jul 19, 2011
I have a Dell XPS 15 laptop and have installed Slackware 13.0 on it. I'm not getting any sound through the speakers. I tried configuring alsa first. However, I did not have any success. Next I also tried inserting some kernel modules corresponding to sound drivers, which was present in /lib. Again, I'd no sound output.I can get sound through earphones though.I've been stuck with this problem from some time.
View 14 Replies
View Related
Dec 25, 2010
View the entire contents of the file / etc / passwd, showing first 10 lines of file / etc / group, 10 displayed the last line of the file / etc / group. And
- The total number of lines and characters in file pwd and grp
View 2 Replies
View Related
Jul 17, 2010
i remember back a few years ago you could partition the drive by simply sliding a slider, and now trying to install ubuntu next to xp my dad was unable to set it up. This is a big step back for the design of the partitioner. He was able to set up ubuntu 7.04 on his old computer many years ago when i was not there. He tried to set up 10.04 today and got so frustrated with ubuntu wanting to take most of his drive, that he gave up. why was the "simple slide to set space you where going to give ubuntu" taken away. he just wants to set up the space he didn't want to deal with root, swap space, and so on. he just wanted to set up a block of space that ubuntu can use however it wants. but the partitioner will not let him. this needs to be fixed. the install process must be simple to use by everyone. i do not want my friends and family getting frustrated with installing it. he was excited to try the new ubuntu till he got to dealing with the partitioner and after that he wanted nothing to do with ubuntu. the installer is the first thing they see make that the primary focus of "easy of use".
View 3 Replies
View Related
Jan 20, 2010
I've been trying to run a simple `yum update` for the last couple weeks, but it barfs before it finishes every time. For every single package it will say something similar to "('installing package libdrm-2.4.17-1.fc12.i686 needs 208KB on the /boot filesystem', (9, '/boot', 212992L))"
Here's an example of the output:
Code:
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
[Code]...
This is a machine that I recently put through several upgrades: Fedora 9-> Fedora 10 -> Fedora 12. The computer has been working well for the most part, with some minor bugs here and there. Yum updates were working just fine until this popped up.
View 2 Replies
View Related
Mar 28, 2010
I'm having trouble installing it on a "new" computer that I found at Goodwill for $60 with no operating system on it. When I go to edit the partitions, it won't let me do anything due to an apparent lack of a root filesystem. (I know this issue has been brought up and resolved in the past, but the usual solution (going into the validation.py file) isn't working for me, as there is no line in this one that says "if not root".)
View 9 Replies
View Related
Jul 29, 2011
Is there a Sound Recorder like the Total Recorder for Windows? Someone told me to use Audacity, but Audacity recorded the mic input (e.g. the net radio sound through the speakers together with the noise of the room). Maybe I just cannot find the right settings.
View 7 Replies
View Related
Jun 21, 2009
Installed Fedora 11 successfully, but I cannot get the MP3 files to produce sound.
Have tried the default configuration for sound, the Pulseaudio and the PulseAudioSoundServer.Installed and use KDE interface. Sound works for SKYPE (after selecting HDAIntel) and the Firefox 3.5 Beta 4.
Below are the configuration details.
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphic(rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02
code....
View 4 Replies
View Related
Jan 11, 2010
I have a toshiba A135 laptop that has been running an old old version of Ubuntu, mainly because I didn't have it set up to receive automatic updates. I decided to upgrade it (to version 8.10), and in the middle of the upgrade, it froze. I had no choice but to reboot the computer. Once I did, it would no longer boot. I tried booting in recovery mode and "fix" the broken packages, and that didn't fix it. When I boot the computer it prompts me to enter my username and password, and then it sits at the blank pink screen forever and doesn't advance on into the desktop.
The next thing I tried was booting from an ubuntu 9.10 disk in hopes that once I was inside the computer, I could at least back up some files that I didn't want to loose on an external hard drive - especially if I was going to end up having to reinstall.
I am able to get to the alternative boot source screen and select boot from cd. Then I select "trial run of ubuntu 9.10 and it just sits at a black screen with the cursor flashing forever. Now I'm at a loss. I would like to be able to at the very least get into my computer and save some files to my external drive but I can't seem to able to do it.
View 5 Replies
View Related
May 27, 2010
I ran the upgrade from ubuntu 9.10 yesterday and it's now a mess. Is there something I can do to refloat this ship?
The file download stage seemed to be working OK: I was watching it when it only had three minutes left to go. I went away and came back a few minutes later and the screen had gone black. OK I thought, this must be all part of the plan, so I went away and came back over an hour later: still nothing. I decided, perhaps foolishly, to press the power button and boot it up.
Eek! Now I get the following errors:
mounting none on dev failed: no such device
chroot:cannot execute /etc/apparmor/initramfs: no such file or directory
Then the message Ubuntu 10.04 LTS cruncher tty1 and a login prompt. I can log in OK but don't know what to do next to recover the situation.
Rather alarmingly there is some activity on the system: lots of messages beginning with a number like [22.71309.
View 9 Replies
View Related
Nov 8, 2010
Sound problems in Fedora 14.
Before Fedora 14 i have Fedora 12 and all was ok with sound. Starting with root account surprize i have sound. But after playing a song in xmms, sound is dead. I have tested sound in Windows and is ok.
View 2 Replies
View Related
Sep 13, 2010
I have got a lap top (Compaq Mini 311), I tried to install Ubuntu 10.04, but after installing it I found only a black screen with a blinking whithe bar, and the keyboard does not work anymore.Looking across the net, I found this page , where is written that I have to install the previous version, do some operation and then upgrade it. Well, also with Ubuntu 9.10 and Ubuntu 9.04 I have got the same problem: total freezeing of the computer after the installation.
So, I tried to install ubuntu with wubi, as a virtual machine, but the problem is exactly the same.Somethimes, it may happen that Ubuntu loads, but it happens about in 1/50 cases.I installed it many times, everytime erasing the partition, but actually I have a boot menu with about 6 or 7 linux (not working), and windows, loading windows I can choose between win and ubuntu, if I choose ubuntu, I have 5 options: 4 are not-working-linux, and one of them is windows. If I choose windows, I come back to the previous menu: a loop on grub was done, but I don't know how.
View 1 Replies
View Related
Jul 1, 2011
I have just done a fresh install of 10.10 (full updates) with my new HD 4870, downloaded the last catalyst 11.6 from AMD, I have done the normal procedure of the driver installation, Ubuntu booted correctly, i changed some options in CCC, one of them the "video tearing option" after that X crashed, rebooted the machine, but it stays that way, before the login screen, the X crashes (corrupted image) only reset button restarts the machine.
I removed the installed driver, purged the configurations and started all over using the deb package creation procedure of the driver and also the manual script installation, but it stays the same way, removed again the driver, installed the OSS driver, it logins correctly, tested also with the restricted driver of the Ubuntu repository, it works, but no "video tearing option".
Done a new fresh install of 10.10 (no updates), installed the driver and enabled the "video tearing option", everything is ok, but if I upgrade the kernel the problem returns (if "video tearing option" is enable), i managed to overcome the video tearing option by always enabling VSYNC. After all this, my question is how can I reset CCC settings via command line, the aticonf --initial dont work in this case, CCC is keeping the settings in some config file (I think) that I dont know the location. I want to do some testing, and its annoying to remove, install , reinstall the driver when the X enters this crash loop.
View 4 Replies
View Related
Jan 23, 2010
I came up on RedHat. While I thoroughly embrace Ubuntu now, I miss the concept of runlevels. I installed all my CentOS servers with Gnome as a convenience on tap when needed. I boot them to runlevel 3 and open a vnc shell if i need gui. Then kill the vnc thus killing the gui. Just a fantastic compromise for me.
SOooo...how to replicate this behaviour in Ubuntu?
NOT a very broad topic on here that I can see. Anyone doing this? How?
View 2 Replies
View Related
May 7, 2010
I am attempting to use putty in Karmic 64 bit - but on clicking open I get to a shell which I cannot type anything into;
Anyone know how I can enable typing into this shell?
View 9 Replies
View Related
Jun 24, 2011
It's a long long story how I got to this point but I'll save that for later. Ubuntu says subAir does not work due to lack of SSL support. That's only one reason why it doesn't work. I've gotten past that and a few more issues. Here is what I've done: Used stunnel to get around the SSL issue.stunnel -c -f -d 127.0.0.1:8080 -r streaming.one.ubuntu.com:443
subAir still will not work and return a 403 because it wants to do a GET /I got around that two ways. One was a reverse squid proxy and another was an Apache proxy. Ok, now we're cooking. Except now subAir is sending POST data to the subsonic server and ubuntu's version does not seem to like that. Try it yourself
curl -d "c=myapp" https://streaming.one.ubuntu.com/rest/getIndexes.view -v
curl https://streaming.one.ubuntu.com/res...s.view?c=myapp -v
sigh.... so here I am thinking about writing a POST to GET 'thing' or maybe we can get some more info on how ubuntu's subsonic api works.
View 2 Replies
View Related
Aug 25, 2010
My /proc/sys/kernel/random/entropy_avail went from 2200 to <200 after ssh-keygen. The generated key pairs also doesn't work (ie I'm asked to provide a password). Anyone knows what is the minimum before and after entropy number I should see in order to have the keys generated properly?
View 8 Replies
View Related
Jan 9, 2010
Little explanation: OEM HP pcs come with an HP_RECOVERY partition which contains an installer which will wipe the HD and install vista (shivvers) Now despite how much I looooove vista, I was wondering why the OS_TOOLS partition shows up in places and recovery doesn't... especially cause niether have a hidden flag...
(As a side note, what the hell does OS_TOOLS do? google yields no answers)
View 8 Replies
View Related
Jan 18, 2010
I've trolled the forums for about 30 mins or so already looking this up, but can't seem to find any solutions. Most threads seem to end with either a "report to launchpad" or they just end without resolution. So in case I've missed a solved thread:
Plugging my Kodak C503 in gives inability to mount due to lock issues, the infamous -60 lockout. However, I get TWO icons in metacity, neither are mounted/will mount. Turning the cam off removes both, and I can't get down to only one. Not sure if this is because it's reading the camera's internal memory + my SD card.
So, I pulled the SD card out, and jacked it into my card reader in my lappy. no dice. In fact, none of my SD cards work; leading me to believe I need to find drivers for it.
Notes: (1)It's a Pavillion ZD7000 (2)nothing pops up in fdisk (3)I really don't want to load up windows
View 2 Replies
View Related
Jun 23, 2010
Every time I reboot my server, it no longer connects to the internet. It is dual-homed with an internal and an external interface. Both come up. The internal connection works fine. Nothing happens on the external interface. Ifconfig shows that both interfaces are setup correctly. My iptables settings are properly restored. Forwarding is automatically enabled. For some reason packets do not go anywhere on the external interface. This has been true ever since the upgrade to jaunty I think (now running lucid).
Once I restart the external interface it works perfectly (eg ifdown eth1; ifup eth1 or /etc/init.d/networking restart). The problem only occurs after a reboot and only occurs on the external interface.
Here's my /etc/network/interfaces file:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
[Code]...
View 1 Replies
View Related
Oct 11, 2010
How can I set my permissions so I can access my home partition? (I am the sole user.)
View 9 Replies
View Related
Jan 26, 2011
I setup a dual boot system, with approximately 200gig planned for ubuntu 10.10. Based on the article here:[URL]..And this quote:
Quote:
# sda1 Recovery Partition, unchanged
# sda2 Windows partition, shrunk preferably from inside Windows, hopefully about 30Gb
# sda3 Primary Partition, 10Gb, file-system = ext3, in the Partitioning Section of the installer change the "Mount Point" = /
[Code]...
I assumed at that point that the "sda3" "/" would be for booting purposes. I would have to guess that I was wrong, because it is filling up very quickly. As you may be able to tell by the screen shot, "sda5", "/home" was what was assumed to be the file structure to store all of the programs and such.
I have only been running this setup for a week, and would expect to not be seeing my "boot" partition growing so quickly. Do I need to resize it? here do the standard programs that I get from the ubuntu software center install at (partition wise)? I suppose I dont mind wiping that section dry and starting over, but I would give a resize a try if possible.
View 8 Replies
View Related
Apr 8, 2010
I am very new to linux. The first time i ran a linux machine was one Saturday. Anyway I am trying to set up an apache web server, all I want to do is play around with html and post it on my unbuntu server so it is available to the internet. I am also trying to install samba but I am having trouble with that so for now I am using winscp. Ok, so I made a folder in my home directory for webstuff, and set up apache to look in that folder.
mkdir /home/username/webstuff
I put my index.html file into the /webstuff folder.
But when I go to my website, it says 403 error unable to access "/"
Did I make the folder in the right place? I do not want people being able to access my / folder so maby I made the web stuff folder in the wrong place? Also I thought I would just put my inded.html file inside of the default one apache gives you, but when I tried to transfer index.html it said permission denied. How to set up permissions so I can use apache and transfer my html files from my remote desktop to my server would be great!
View 7 Replies
View Related
Sep 20, 2010
I'm an owner of a ATI mobility radeon X1300 card. Since ATI tagged my card as legacy, i'm stuck with the open source radeon drivers. Wich doesn't bother me, as i know they are slower and openGL support doesn't equal fglrx. What does bother me is that the current version 7.9 dev. claims to have full opengl support up to 2.1. I'm trying to use a extention that is part of the openGL version 1.3 and it's failing. This is a known issue for a long time now and it really disappoints me. "Compressed textures" is what i'm talking about.
Is there any way to make sure that drivers aren't tagged with something they support if they obviously don't? I guess the KDE4 kwin vs drivers thing is the same as i'm trying to say now. Drivers should be documented with what they effectively support and not what they should support. What can I do to make this public to xorg developers? I could only think about posting this here as i have no idea where to put it elsewere. Could someone please point me in the right direction to where i should send this complaint?
View 2 Replies
View Related
Dec 1, 2009
I've installed F12 kde fine, but couldn't get any sound. How to troubleshoot this?
View 3 Replies
View Related
Apr 18, 2010
Until recently I was running Fedora 8, for which I also struggled to get the sound working. IIRC the key step in F8 was to select ALSA instead of OSS drivers, or vice versa (I forget which), but that option doesn't seem to exist any more.Since installing F12 I get no sound at all (works fine in Windows). I see a number of threads on this topic in various forums, the most informative I've found being URL... I've checked all the settings mentioned in that thread, but nothing seems to be wrong. Here are a few details of my set-up:
If I run RhythmBox everything seems to work. RhythmBox itself behaves as if it plays and the volume meter shows sensible varying levels of sound. But my speakers don't make any sound at all. All other apps I've tried behave similarly.
View 12 Replies
View Related
Nov 28, 2010
I found several occurences of this problem, but all the fixes were in ubuntu.. Anyway, Ive been trying to get ePSXe to work, and I finaly got it runnin, but found out that I had no sound when I load an ISO. So I looked into OSS. I downloaded the latest rpm that I could find and installed it. From what I read I get the feeling that that isnt how I should have done it. Anyway, once I installed it, I had sound for ePSXe, and flash, but nothing else. Im not exactly sure what happened. Im running FC13 btw.
View 4 Replies
View Related
Jul 21, 2010
2010.07.21 while trying to install Ubuntu 10.4 I've been trying to install Ubuntu 10.04 on my Dell workstation and am unable to get the Grub-2 bootloader to load properly. It seems to be failing for lack of a floppy drive on the system resulting in an error message that reads : error: fd0 cannot get C/H/S values.
I've gone through the Grub-2 page at [URL].. to no avail and other sources having similar problems have likewise turned up no solutions. here's the background: A while back I was trying to install a different version of Linux and had the same problems, then had to set the project aside for a bit. I don't think this has anything to do with Linux or Ubuntu per se, but rather Grub.
The system is an old (4-5 years) Dell workstation that has one drive (128 GB) set up for Windows XP and a second new drive (500GB) which I installed for Linux. There is a DVD/CD drive and the system contains no floppy drive at all. In one attempt to get this working I tried modifying the BIOS to indicate there was a floppy drive - this created a failure earlier in the chain with the BIOS failing to load properly, not unexpected, just a shot in the dark at that point.
At the moment I am considering just running out to buy and install a cheap floppy drive to see if that helps. I'll never use the thing though so I'd rather find a solution that doesn't require me to spend money on useless hardware. In any case, here's the /boot/grub/grub.cfg contents:
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
[Code]...
View 1 Replies
View Related
