Ubuntu Installation :: Total Meltdown While Upgrading To 8.10?
Jan 11, 2010
I have a toshiba A135 laptop that has been running an old old version of Ubuntu, mainly because I didn't have it set up to receive automatic updates. I decided to upgrade it (to version 8.10), and in the middle of the upgrade, it froze. I had no choice but to reboot the computer. Once I did, it would no longer boot. I tried booting in recovery mode and "fix" the broken packages, and that didn't fix it. When I boot the computer it prompts me to enter my username and password, and then it sits at the blank pink screen forever and doesn't advance on into the desktop.
The next thing I tried was booting from an ubuntu 9.10 disk in hopes that once I was inside the computer, I could at least back up some files that I didn't want to loose on an external hard drive - especially if I was going to end up having to reinstall.
I am able to get to the alternative boot source screen and select boot from cd. Then I select "trial run of ubuntu 9.10 and it just sits at a black screen with the cursor flashing forever. Now I'm at a loss. I would like to be able to at the very least get into my computer and save some files to my external drive but I can't seem to able to do it.
I installed Fedora 14 XFCE last weekend on my laptop..been putting in a little time here and there into customizing it, as I was trying to make it my new main OS, when suddenly today it suffered a complete meltdown that I have no idea where to start in trying to fix it. All I was doing was browsing through the desktop themes. I hit a certain theme, don't know which one, and the screen went blank. X then looked like it was trying to restart, then blank again. Then X looked like it was restarting, and blank..and repeat endlessly. I tried turning the laptop off and then turning it back on again.same result. Now I basically have a dead system, practically speaking, because I can't use it.
Putting aside the fact that it is immensely frustrating to have a Linux OS choke and die on me just from browsing through the preset desktop themes, does anyone have any idea what I can do to fix this, aside from doing another fresh install? The only way I can think of to fix it would be to login into some kind of rescue mode (which I don't know how to do), get to a shell prompt, find the right config file (which I have no clue about, either), and fix the settings to where it will at least boot up, then I can select the default theme and never touch the themes again.
After that I suppose I should put in a bug report or something to Fedora about this -- that is, if I can reproduce it. Maybe that'd be at least some compensation, since I had high hopes for Fedora when I decided to try it, but this sort of crash-and-burn is just utterly disappointing.
i am trying to upgrade to ubuntu 10.04 from 8.04, and am getting this warning:"Upgrading may reduce desktop effects, and performance in games and other graphically intensive programs.This computer is currently using the AMD 'fglrx' graphics driver. No version of this driver is available that works with your hardware in Ubuntu 10.04 LTS.Do you want to continue?"should i continue? i have no idea what a 'fglrx graphics driver' is
I ran the upgrade from ubuntu 9.10 yesterday and it's now a mess. Is there something I can do to refloat this ship?
The file download stage seemed to be working OK: I was watching it when it only had three minutes left to go. I went away and came back a few minutes later and the screen had gone black. OK I thought, this must be all part of the plan, so I went away and came back over an hour later: still nothing. I decided, perhaps foolishly, to press the power button and boot it up.
Eek! Now I get the following errors:
mounting none on dev failed: no such device
chroot:cannot execute /etc/apparmor/initramfs: no such file or directory
Then the message Ubuntu 10.04 LTS cruncher tty1 and a login prompt. I can log in OK but don't know what to do next to recover the situation.
Rather alarmingly there is some activity on the system: lots of messages beginning with a number like [22.71309.
I have got a lap top (Compaq Mini 311), I tried to install Ubuntu 10.04, but after installing it I found only a black screen with a blinking whithe bar, and the keyboard does not work anymore.Looking across the net, I found this page , where is written that I have to install the previous version, do some operation and then upgrade it. Well, also with Ubuntu 9.10 and Ubuntu 9.04 I have got the same problem: total freezeing of the computer after the installation.
So, I tried to install ubuntu with wubi, as a virtual machine, but the problem is exactly the same.Somethimes, it may happen that Ubuntu loads, but it happens about in 1/50 cases.I installed it many times, everytime erasing the partition, but actually I have a boot menu with about 6 or 7 linux (not working), and windows, loading windows I can choose between win and ubuntu, if I choose ubuntu, I have 5 options: 4 are not-working-linux, and one of them is windows. If I choose windows, I come back to the previous menu: a loop on grub was done, but I don't know how.
I have just done a fresh install of 10.10 (full updates) with my new HD 4870, downloaded the last catalyst 11.6 from AMD, I have done the normal procedure of the driver installation, Ubuntu booted correctly, i changed some options in CCC, one of them the "video tearing option" after that X crashed, rebooted the machine, but it stays that way, before the login screen, the X crashes (corrupted image) only reset button restarts the machine.
I removed the installed driver, purged the configurations and started all over using the deb package creation procedure of the driver and also the manual script installation, but it stays the same way, removed again the driver, installed the OSS driver, it logins correctly, tested also with the restricted driver of the Ubuntu repository, it works, but no "video tearing option".
Done a new fresh install of 10.10 (no updates), installed the driver and enabled the "video tearing option", everything is ok, but if I upgrade the kernel the problem returns (if "video tearing option" is enable), i managed to overcome the video tearing option by always enabling VSYNC. After all this, my question is how can I reset CCC settings via command line, the aticonf --initial dont work in this case, CCC is keeping the settings in some config file (I think) that I dont know the location. I want to do some testing, and its annoying to remove, install , reinstall the driver when the X enters this crash loop.
Just installed fedora 13. Everything is great except for the total lack of sound. I'm trying to use the onboard audio. Motherboard is asus M4A89TD. In alsamixer all of my devices are turned on to max.
When I open pavucontrol, under output devices it lists 'HDA ATI HDMI Digital Stereo (HDMI)' and 'Internal Audio Analog Stereo'. I think the correct device needs to be the the ATI SB one, but is missing from the list.
View the entire contents of the file / etc / passwd, showing first 10 lines of file / etc / group, 10 displayed the last line of the file / etc / group. And - The total number of lines and characters in file pwd and grp
My Windows Vista installation won't start after upgrading from Karmic to Lucid. If I select it on GRUB2, it leaves a blinking cursor on screen. And I tried doing the whole test disk thing and the boot info script. This is what my Results.txt file says
I've upgraded the generic kernel of my Xubuntu Karmic AMD64 persistent USB installation with the ubuntustudio realtime kernel (2.6.31.9.10). The thing is that the generic kernel is still loading as default and I don't have the option on the boot menu to choose the new one. I don't know how to edit this Grub2 version (grub-pc 1.97 beta 4).I haven't found a GUI package for this either.
I've had the 10.04 installed on a notebook for about a week now and I want to upgrade to the LTS that was released today. When I go to check updates it shows me that everything is already updated. How can this be? Is there another way to upgrade from RC to LTS that I don't know about?
Installed 7.04 on a toshiba satellite M115 Laptop. I want to upgrade to 10.04. Made a boot disk and tried to launch but 7.04 always opens. How can I get this upgrade done?
I am upgrading to Ubuntu 10.10 Alpha 1. This is on my gaming machine so I can test it and if it screws my system up, I can reinstall. I have not seen any issues so far. I think there might be a thread already open for talking about 10.10 but I am creating this thread anyways.
The upgrade is going faster than when i first did the upgrade earlier this month.I am testing Ubuntu 10.10 on a computer with a 1.6Ghz AMD 64 processor.It has 3 GB ram and a 500GB hard drive. 128 MB video ram.
Note: This is The emachines EL 1200-06w I am using a Belkin wireless card which is only able to be used with the help of Windows Wireless Drivers (ndiswrapper).
I plan to report bugs in launchpad. Last time, Ubuntu could not start after an update. Now, I am risking down time by using the Alpha version again. I am installing by going to: Applications -> Accessories -> Terminal In Terminal, I enter in
Code: sudo update-manager -d and then it asks for a password to open update manager. Then it shows the upgrade is available. I am still at the process of upgrading the computer. I am running Ubunut 10.04 32 bit at the moment.
UPDATE: I didn't need ndiswrapper, and I am able to now use Natty, where it works as it should.
Recently I wanted to install Ubuntu 10.04 from a CD which I had sent to me, but which I never actually used. So I put the CD in my laptop, used Wubi to install Lucid Lynx next to Windows in dual-boot, and restarted the laptop. Everything was OK. I noticed that the Update Manager didn't come up yet. I glanced at the notification area, and I wasn't connected to the Internet. So I entered wireless connection password and so Internet was back.I then opened Update Manager, changed release options to "Normal Releases" and was told of upgrade to Ubuntu 10.10. So I pressed the button, successfully updated and restarted. BUT, when Ubuntu tried to reboot, it gave a whole list of errors, and proceeded to shut down. Right now I'm manually downloading 10.10 64-bit, and Wubi. And I uninstalled previous installation. If this works, then great. But I still want to know, just out of interest, why the hell did it do that? Is there issues with the upgrade? Was there errors in my Ubuntu installation?
I have perfectly working Ubuntu 10.04 on my Dell Vostro 1500 laptop. But, yesterday I upgraded it to Ubuntu 10.10. There were various error messages during upgrade process, but it showed that I can continue without certain package. But, after restarting the laptop, I didn't found the new kernel entry in the GRUB. So, I continued with booting using older kernel version. It showed that ubuntu is booting but after sometime screen went totally blank. I even tried to boot into recovery mode, but faced same problem.
Then I booted with live CD, and chroot to the root folder of ubuntu on my HDD. After running command "dpkg --configure -a" I got error messages which are stored in attached file error-msg.txt.I cannot format the linux partition for a clean install. Please suggest solution for either recovery of 10.10 or restoration of 10.04.
I currently have Ubuntu 9.04 Installed and everything works perfectly. Its no longer allowing me to do the automatic updates saying my distribution version isnt supported anymore, and want to upgrade to 10.10.
When version 9.10 came out I upgraded through the Update Manager, and it screwed up the install and nothing worked. I ended up deleting everything and started from scratch. I dont want to go through that again.
I was wondering the easiest way to upgrade to version 10.10, because even the Update Manager only gives me the option to upgrade to version 9.10
I have what it may seem to most of you a nooby question but it is the first time for me that a new version of Ubuntu comes out, so I want to know if I will have to do a new "clean" installation of 11.04 when it's released or will it be some sort of upgrade from software center. If I have to do a new installation is there a way to reinstall all the programs I have all at once or maybe take a backup of them or will I have to install them all one by one?
Is it possible to accomplish this? Or do I have to install each subsequent version until I reach 11.1? When I run the update manager it never informs me of a new release.
While upgrading from 9.04 to 9.10 using Alternate CD, the OS crashed. I had updated the 9.04 with latest updates and then started the upgradation to 9.10 using a Alternate CD. But after some time, the computer resarted and the screen displayed six line of 9.04 startup line. I waited for ten minutes but nothing happned.
What can be the reason and what should be done in that situation.
I'm upgrading from an AMD XP 2300 chip on an ECS motherboard to a intel i5 chip on a ASUS motherboard. I was wondering if I will encounter any problems or if the system will work right away without reinstallation.
I wanted to use Ubuntu on one of my old laptops (a great, speedy modern OS on a modest hardware PC). Unfortunately this PC can not at the time read all CD-ROM's (can't figure out why it does read some) and I've installed Ubuntu 7.10 - the only CD it did read at the time.
I've used it for two years but I never got my wireless card to work (OK, most of the time it was collecting dust) A couple of days ago I finally realized how to use ndiswrapper (lol...) and I was able to get a working Wi-Fi connection on this laptop. I then proceeded to upgrade it over the internet, to Ubuntu 8.04, then 8.10, then 9.04 and, last night, to 9.10.It has worked through each and every of these updates, but after 9.10 the PC won't even boot (after "GRUB loading...).
I'll probably be taking my netbook up to Lucid here in a few days. My question is if I should bother with the Netbook Edition or just get the standard edition? Are there any packages in the netbook edition that can help with processing, power, etc on a netbook? More importantly, can the special netbook desktop be turned off in favor of the standard UI?
Getting my 8.04 system ready to upgrade to 10.04 by doing all the upgrades but running into the following. It looks like the update-rc.d script it being passed bad arguments?
Code:
$ sudo aptitude safe-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information
I've just upgraded to 10.4. I have to load kernel 2.6.31.20 instead of default 2.6.32.21 (it freezes). When the system starts up eth0 is missing. sudo modprobe e1000 lspci | grep net doesn't display anything I am using an on board ethernet rj (Intel).
when I try to upgrade from Hardy Heron 8.04 LTS towards Lucid Lynx 10.04 LTS (via internet, not ISO-CD), following error is displayed:
" Could not install the upgrades Error during commit 'E:Couldn't configure pre-depend jre for openoffice.org-writer2latex, probably a dependency cycle.' Restoring original system state "
I deleted all Open Office package and other options were checked, but no success. Hardware: Notebook Toshiba Qosmio G45-AV480.
