I downloaded the Full DVD install and burned it using nero. When I reboot to install it loads everything. Though when I try to push a keystroke it doesn't recognize them apparantly and restarts the sytem after a few seconds. Im using an usb keyboard.
View 2 Replies
I have just update from 11.1 to 11.2 and after reboot system hangs when arrives to the screen where all users logins are showed. I run the installation again in repair mode. Everything correct. Started system again in Level 3, login as one of the users and run startx. It starts the desktop but no keyboard or mouse is working. Started system again in level 3, login as root, started gdm and same results. It arrives to the login screen for the different users and keyboard and mouse does not work. System seems to be running as clock in the right down works.
Started system again in Level 3, login as root, run SaX2 and same results: no keyboard no mouse. I am running gnome desktop with last image downloaded openSUSE-11.2-DVD-i586.iso. it seems to be something related to bug in OpenSuse 11.2 Milestone 7: (Bugs:Most Annoying Bugs 11.2 dev - openSUSE) HAL may crash, leaving XOrg without keyboard and mouse (Bug #537452), work-around: update with 'hal' package from Base:System
I am using Wheezy netinstall on a USB stick. The machine has an Intel DH57JG motherboard, USB keyboard, and no optical drive. The installer loads to the initial screen OK, but the keyboard is not active. This problem has been reported for several years and was supposed to be fixed by kernel 2.6.32, yet here it is. What can I do?
One suggestion has been to disable/enable USB legacy support in the BIOS. It is enabled by default. If I disable it, the installer doesn't load. This keyboard works fine on other Linux machines and on the BIOS in this machine. I read there was a problem with Cherry keyboards and the Squeeze installer. This keyboard is not a Cherry but does have Cherry keyswitches.
Running Slackware 12.0 (2.6.29.4), performed an entire package update via slapt-get --upgrade, after the upgrade keyboard is not recognizing every keystroke. I have searched the forums for similar issues, but due to the broad verbiage as to how to describe the problem, I have yet to find a solution.
I'd prefer not to have to upgrade to Slackware 13.0 or my kernel. Prior to performing upgrade, keyboard was working as expected. This really puts a damper on things, I type very fast and use the terminal 75% of the time. Having to backspace and retype is getting annoying.
Please, if anyone has any ideas, I am open to suggestions. Thanks.
I am trying the 10.4 version from last months APC DVD (I have used 8.4 (liked it) and 9.4 (failed to install) and I am trying to install it on my spare rig to see how it all goes.
System Specs:
Intel E6850 @Stock Speeds (normally OC'd to 3.2GHz)
G.Skill 2GIG DDR2 800Mhz RAM
WD500GIG SATAII Green HDD
Gigabyte P35 Motherboard (latest Bios)
Nvidia 9600GT Palit Sonic GPU
I boot disc from post, goes through the 1st 3 steps, select time zone etc and it wont find my HDD but it will find my USB mem stick when its plugged in.
I will keep fiddling in the bios to make sure that I have everything correct (it works fine when I installed w7 about 2 hours earlier)
I am installing it without dramas on a old P4 1.6GHz s478, 512mb Ram, 40GIG IDE and a old Geforce MX460 GPU and its at 53% so I know that the disc / version is good.
Every time I look at firefox (i.e. bring it to the foreground), and when I go back to programs like terminal, GVIM, or pidgin, they won't recognize my keyboard unless I click on some specific thing. For example, I have to click the top of GVIM and pidgin and drag it around a bit, then I can type in those programs. For terminal I have to switch to a different tab and switch back before I can do anything. For some other programs, simply pressing "control-z" to undo will make the program not recognize the keyboard until some action with the mouse is done. This started to happen a few days ago after I tried to install scim to type Chinese (may or may not have any thing to do with it).
View 3 Replies View RelatedI had ubuntu 8.10 installed, but support was no longer offered - I wasn't able to upgrade software etc. I decided to upgrade to 10.04 today. I made the boot disk as normal, but when I went to install it I got the message "This computer has no operating systems installed". The only options were to wipe the entire hard drive or create my own partitions.
I have Windows Vista installed, so I deleted the partition which had ubuntu 8.10 (and also the swap file partition) so I now have free space on the computer. However, in Vista this shows up as an extended partition with Dell MediaDirect.
When I go back to the 10.04 installer, it still does not recognize my Vista installation, and only gives me the option of wiping the HDD. From googling and searching these forums, it appears as though the problem is that the free space and the Dell MediaDirect partitions overlap and this is why the free space is not recognized by ubuntu.
I'm having trouble getting Ubuntu installed on my desktop, I'm trying to get a dual boot going with Windows 7.
The Windows 7 install was fine and the OS is working with no problems at all. But when I try and install Ubuntu, the installer can't see any hard disks on the system. The first screen is OK where it checks for available disk space, but on the following screen there are no disks listed.
I can boot into the Live CD with no problems, and I can see the disk and create partitions with GParted, but when I go back into the install it can't see them. fdisk -l can see them as well code...
I tried using the all_generic_ide option as well because I saw that in another post but it didn't help. I'm not really sure where to go from here, I've looked in the BIOS and there's very few options relating to the HDD, and none of them seem relevant. There's no RAID configuration or anything weird like that.
The machine is an AMD 64 with a Gigabyte GA-K8N-SLI motherboard. The HDD is a 250GB SATA2. The disk seems fine, and I've verified the install DVD as well, it seems to be OK (I tried both the 32 and 64 bit installers).
I am attempting to install Fedora 11 on a Dell Windows Server 2003 computer from CD (I just want to override the Server PC with F11). I used this media in my class last night after testing it, so I know the media itself is good. We did have lots of issues getting the keyboard and mouse to work during the install attempts last night, too, but eventually it worked. Unfortunately, at home is a different story!
I boot from install Disk 1 and get to the first screen with the option of testing the media or skipping it and I only get one keystroke then nothing. F11 just hangs/stops/freezes/locks up. Reboots don't help and I attempted to install from the F11 DVD I made, too, but the machine completely wouldn't see that disk at all! The keyboard is connected directly to the computer via PS2. I don't have a USB keyboard laying around nor an adapter to try.
I would love to hook up my children with F11! I did manage to figure out what files to download, burn to disk and how to install F11 at school yesterday).
I am Quad booting my lappy with Fedora 12, Opensuse Karmic and Vista. Previously Grub2 is not recognising Fedora partition. Now i have managed to add Fedora entry to Grub2. But i got another problem, after selecting Fedora from grub menu, i cant get login window. I can see fedora sign at the bottom right corner of Laptop LCD.
View 2 Replies View RelatedI downloaded the 7 isos and burned them to CD properly, but I can't seem to get my Powerbook to startup from CD 1. I've held down "c" while starting up just like usual, but it's not recognizing the CD as a startup disc. It simply goes into OSX or OS9. I'm a Linux novice, unfortunately.
View 1 Replies View RelatedWhen attempting to install FC12 x86_64 on a Dell Optiplex 760, my USB devices stop working after initial boot. I see anaconda, but am unable to change anything since my keyboard, mouse and any other USB devices are not powering up after kernel boot.
View 13 Replies View RelatedAfter my Fedora core 9 successful installation I am getting Msg on screen "No input detected"
View 1 Replies View RelatedI downloaded Ubuntu and burned it to a CD-There was no problem with that part. It starts to install asks about the partition then the keyboard. Then it just stops and does nothing.
View 3 Replies View RelatedI've installed OpenSUSE 11.2 on my computer. Well, 11.2 is great and all, but issuing ifconfig yields only loopback device. Now, I have OpenSUSE 11.0 installed on my notebook; the system works fine, although I had that very problem initially and had to recompile the kernel in order to make it recognize my notebook's ethernet card. My question is: If I upgrade my notebook's 11.0 up to 11.2, am I sure to have my files intact? Is 11.2 sure to "see" the ethernet card?
View 2 Replies View Relatedi just downloaded Ubuntu 10.10 onto a USB key and am attempting to instsll it next to Windows XP. The Ubuntu install wizard has giot to the point where i have already chosen my language and asked it to install upgrades as well, when i click "Foward" it only displays two options:
1) Erase and use entire disk
2) Specify partition manually
It is supossed to give the option to "Install along side other operating systems". This option is not being shown -si what do i do?
I am trying to install a fresh install of Ubuntu 10.10, but I am finding it is not recognising my only HDD in the machine. It is working because I am running Windows 7 x64 on it.
Here are my machine specs:
CPU: AMD Athlon 64 X2 5600+
Motherboard: XFX MI-A78U-8309 GeForce 8300
Graphics Card: NVIDIA GeForce 8300 + 8400
HDD: WDC WD5001AALS-00L3B2 ATA (~415GB)
The installation knows when my IDE drive is plugged in, but I want to install the boot sector in the WDC drive.
WUBI also fails to install on this current drive, though can setup the boot sector OK.
As every time when a new OpenSuse Version arrives, I tried to install 11.4 (I have 11.2 ans 11.3 on separate partitions, + a Windows 7 that already was there when I bought my computer). Previous versions always recognized existing installations and added them to the Grub list, 11.4 doesen't... it merely recognizes the Windows. This is blocking me from testing it before adopting, as I always do, as I don't know how to add these entries manually; I'm too afraid not to be able to add the entries once installed, and not being able to use my older versions in case I have troubles. What went wrong in this release that developers forgot this important part? How I could manually add my entries for 11.2 and 11.3?
View 6 Replies View RelatedI have installed windows after installing debian. Whenever, I start the system, I dont get debian instead I get only windows.
View 6 Replies View RelatedI'm trying to install the Ubuntu ISO onto my USB drive using the Universal USB installer. I selected the distribution, found and selected the ISO file, but cannot select my USB drive.
I have a stick with 1.86GB of free space connected to my computer, and I can see it in My Computer. It is completely empty, and designated as ( F: ). The problem is that the 'Select your USB flash drive' part is only letting me choose either D: or E:
I'm trying to install Ubuntu 10.10 from my live USB disk. In My computer, it is showing all drives correctly, but when I try to install using the installer on desktop, it is showing the whole hard disk as free space and no partitions at all.
when I tried 'sudo parted' and then print command, I got the below error message.
Error: Can't have a partition outside the disk!
I formatted the C drive from linux using ext4 filesystem.
How can I make the ubuntu installer recognize my partitions?
Background: I dual boot Ubuntu 10.10 and Windows 7. I use an HP laptop.
So here's the deal. My Windows 7 partition got a virus a few weeks back. So, I removed the partition and replaced that partition with a squeaky clean version of Windows 7. Then, since Windows had installed, I could not get grub to work. So I booted up my disk and installed a third partition, which was a second Ubuntu partition, which I plan on deleting. I did this so I could get grub back. Now I have grub back but no Windows. I can mount Windows from both partitions. Then, I modified the /boot/grub/grub.cfg file to add windows. It showed up in grub but when I booted into it, it says "bootmgr not found." I also did an update on grub and that didn't work. I want to be able to boot into that windows partition.
Alright so i'm trying to install ubuntu 11.04 except it's not recognizing my hard drives. I have two 80gigs plugged in via sata. And neither of them are being recognized by ubuntu. I have tried plugging them in together, and separately, still nothing. I'm getting pretty frustrated. Ubuntu 11.04 just doesn't seem to be working for me. I can run from the liveCD, but i get no unity desktop environment
View 3 Replies View RelatedThe title says it all. I'm trying to install Ubuntu 9.10 on my PS3, but the keyboard isn't typing. I can't complete the install, because I can't type anything. I've followed all the steps properly, everything goes smoothly, the mouse works just fine, and the capslock and numlock lights light up on the keyboard, and toggle when I press the corresponding buttons. The keyboard even works at the kboot prompt. After I choose the partition to use, I have to enter my information to continue. Without being able to type, I can't progress. The keyboard obviously works, since I can type just fine at the kboot prompt.This one's got me scratching my head. I'm going to try a 9.04 cd tomorrow, see if that works, but I was really hoping to get 9.10 on there.
View 8 Replies View RelatedI'm trying to install 10.04 but my Logitech diNovo Edge wireless USB keyboard doesn't work.
View 1 Replies View RelatedI tried to install Ubuntu 10.04 on a quiet old DELL Inspiron 2650. During the install process, neither mousepad nor keyboard (German-Swiss) are detected. Hence it is impossible to get through the install process.
View 1 Replies View RelatedI'm running fedora 8 and i have a TEW-424ub. I recently ditched windows, and the only disk i could get was a Fedora 8 dvd. I used ndiswrapper to get my driver installed, then I used the iwconfig commands to hook myself up to my wireless. However, every time i do the command
Code:
My comp freezes up. I then decided to use the GUI to set it up, as it might be less aggravating. It found my network, i input the key, double-check, and it atttempts to connect, then asks me once again.'
Also, if I go to Network Configuration, and activate my ndiswrapper device, it gives me the error & my comp freezes up "Set Encode" (8B2A) SET failed on device wlan0:0 ; Invalid argument.
Amarok 2.4.3 in fedora kde spin with kde update to 4.6.5 was loading my 120gb ipod classic as a generic usb drive instead of an ipod. This made transferring songs impossible.
To fix it: yum downgrade amarok*
Which downgrades amarok and it's dependencies, and then use --exclude=amarok* option with subsequent yum commands until problem is fixed upstream.
I am new to Linux and actually just finished my install about 30 minutes ago. Ubuntu 10.04 isn't recognizing my wireless adapter, so I need to install the drivers. I know where the drivers are, I just don't know how to install them on a Linux system.
Here is the driver page. I don't know how to download the .inf file (necessary?) but I have ndiswrapper, bcmwl5.sys, and sp33008.exe all in the downloads folder.
Apparently just double clicking the files does nothing, so what do I do now?
I just did a clean install to wheezy on my desktop (figured it was safe enough) and I found out my preferred keyboard, the Logitech 'Wave' K350, does not work on the wheezy installer. I tested to see if the mouse would work (M510) and it didn't work either. It works (or at least it did a few months ago) fine on the Squeeze installer. why my K350 didn't work on the install. It's just your typical wireless keyboard & mouse combo.The K350 works fine after the install.
View 6 Replies View Related
