Debian Installation :: Wheezy Installer Not Recognizing USB Keyboard
Jul 6, 2011
I am using Wheezy netinstall on a USB stick. The machine has an Intel DH57JG motherboard, USB keyboard, and no optical drive. The installer loads to the initial screen OK, but the keyboard is not active. This problem has been reported for several years and was supposed to be fixed by kernel 2.6.32, yet here it is. What can I do?
One suggestion has been to disable/enable USB legacy support in the BIOS. It is enabled by default. If I disable it, the installer doesn't load. This keyboard works fine on other Linux machines and on the BIOS in this machine. I read there was a problem with Cherry keyboards and the Squeeze installer. This keyboard is not a Cherry but does have Cherry keyswitches.
View 1 Replies
ADVERTISEMENT
Nov 23, 2014
I am installing Whezzy and the installer failed to install grub on the MBR of /dev/sda
My disks are
- /dev/sda : the flash drive with the debian ISO
- /dev/sbd : a small SSD for the / partition (sdb1)
- /dev/sdc + /dev/sdd : a software RAID-1 array with LVM for /home, ...
Grub fails to install on /dev/sda which makes sense since this is the flash drive containing the Debian ISO so no MBR.
I already tried to run grub-update manually on /dev/sdb (with chroot /target grub-install --no-floppy --force "/dev/sdb" ).
It works but the system is not directly bootable. I had access to a second PC to read the grub documentation so was able to boot and to fix my system but this is annoying.
Is it normal to see my flash drive as /dev/sda? Could it be that my flash drive is incorrectly detected as a HD?
Is there a way to force the installer to install grub on /dev/sdb?
View 2 Replies
View Related
Aug 25, 2011
I'm trying to install Wheezy (amd64) from the daily netinst image with the text-based installer. The PC will lock up randomly at some point in the process (usually after about 5-10 minutes). The video signal cuts out, keyboard lights are unresponsive, and I have to hard-reset the machine.I was previously trying to install Linux Mint Debian Edition and had the same problem. Another user reports that this is due to a bug in the nouveau nVidia driver, but I can't confirm it.URL...
I assume the Debian text installer isn't using nouveau, so it seems unlikely that would be the problem. The random timing does suggest an overheating problem, though, and the fact that the video signal drops out would seem to implicate the video card. I had no lockups at all with the OS that was previously installed (Ubuntu 11.04).
View 4 Replies
View Related
Feb 22, 2015
The kindle device is seen as per lsusb:
Code: Select allmax@max-debian:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
[Code] ....
But this is my output of calibre debug device detection
calibre 2.20 isfrozen: True is64bit: True
Linux-3.2.0-4-amd64-x86_64-with-debian-7.8 Linux ('64bit', 'ELF')
('Linux', '3.2.0-4-amd64', '#1 SMP Debian 3.2.65-1+deb7u1')
Python 2.7.9
Linux: ('debian', '7.8', '')
[Code] ....
what does exactly means that device error?
View 4 Replies
View Related
Mar 24, 2015
After installing KDE USB keyboard and mouse won't work. They are added to /proc/bus/input/devices though.
I also tried to install Gnome; same thing.
I took #usb-devices and they were there also..
But #usbhid-dump did not generate anything to screen.
View 4 Replies
View Related
Apr 19, 2011
anyway the reason for my posti downloaded a network install of wheezypartitioned and loaded wheezy on to a dell latitude d600now after installation the keyboard and mouse ( touchpad or nipple ) do not functionsince this inconvenience i have been plugging in a usb keyboard and mouse at the graphical login then using them to work the laptopAfter a reboot the usb peripherals do need to be uplugged and reconnected otherwise they also do not functioni am obviously missing something vital here but i am not sure where to start, kernel 2.6.38.2-686
i have loaded the non-free repos added the various firmware files etc. to get wireless and bluetooth to functionbut the keyboard and mouse has me stumped i have searched the forum and google but haven't come across anyone with the same issue.Some forum suggestions have been to reconfigure xorg.conf but this does not exist on this installevdev - the event driver is thereudev - the kernel device manager is also there
View 13 Replies
View Related
Apr 18, 2011
Currently, I have a dual boot set up with Ubuntu and PCLinuxOS. I have a separate / and /home partition for both (ext4). When I run the installer, it claims the whole disc is empty. I tried the expert option and loaded every module that seemed to have to do with partitioning, but that made no change. Is there some simple option I am missing that might help it recognize that there are existing partitions? This was the "testing" installer if that makes any difference.
View 3 Replies
View Related
Jul 6, 2010
I am currently running an Asus EEe PC 1000H with Windows 7 installed on it. I am trying to set up a dual boot with Debian. My problem is: I boot the netbook via an SD card with the netinstaller image. When it comes to create partitions, the installer tells me, that my HDD is completely empty, which is not true. I have 3 partitions, one with w7, one with stuff (fat32) and one empty, where debian should go. Because it doesn't recognize my partitions, it only wants to create a new partition on the supposedly empty HDD, which is not what I want. Why does it not recognize my HDD? It always worked with Ubuntu, LinuxMint etc.
View 1 Replies
View Related
Jan 10, 2011
I'm trying to install Debian Testing onto my Acer Aspire One ZG5 using the testing versions of boot.img and debian-testing-i386-CD-1.iso. I previously installed (two days ago) the latest release of stable, and the boot.img/CD1 from that worked fine, installed seamlessly. With testing though, the menu does not respond to the keyboard as soon as the menu appears to select Install/Graphical install/Help, etc. I have also tried to boot with an external (USB) keyboard, which again, works fine with the stable version of boot.img/CD1, but not testing.I did some searching and couldn't find anything that looked similar
View 6 Replies
View Related
Aug 2, 2010
I'm trying to install the Ubuntu ISO onto my USB drive using the Universal USB installer. I selected the distribution, found and selected the ISO file, but cannot select my USB drive.
I have a stick with 1.86GB of free space connected to my computer, and I can see it in My Computer. It is completely empty, and designated as ( F: ). The problem is that the 'Select your USB flash drive' part is only letting me choose either D: or E:
View 1 Replies
View Related
Nov 28, 2010
I'm trying to install Ubuntu 10.10 from my live USB disk. In My computer, it is showing all drives correctly, but when I try to install using the installer on desktop, it is showing the whole hard disk as free space and no partitions at all.
when I tried 'sudo parted' and then print command, I got the below error message.
Error: Can't have a partition outside the disk!
I formatted the C drive from linux using ext4 filesystem.
How can I make the ubuntu installer recognize my partitions?
View 3 Replies
View Related
Oct 25, 2015
I have Asus Z87-PRO motherboard with i5-4670k and I'm trying to install Debian Testing with 64-bit architecture. My problem is mouse and keyboard (I guess USB in general) stop working after installer get loaded (the last thing I do is choose between text and graphical install). I found a few topics on different forums indicating that I should enable IOMMU (Intel VT-d) option in my bios.
The problem is that Intel k-series processors didn't use to have IOMMU support, so there's nothing I can do about it. I tried changing different bios options like disabling UEFI, enabling xHCI and EHCI with no luck. Passing "iommu=off" or "iommu=soft" to the boot command also doesn't work. However, I have LMDE 2 64-bit live cd (based on Debian Jessie) and it works fine, so I guess my problem may be related to some changes in 4.2 kernel.
View 3 Replies
View Related
Nov 25, 2015
This laptop has been in the mainstream news as the cheapest Windows laptop available. Unfortunately it has a 64-bit CPU with 32-bit UEFI that dumps to the grub shell before installation. In addition, the built-in keyboard does not work.
As far as the dump to shell problem, this seems like something is not setup correctly in the grub UEFI configuration. This "hybrid" notebook should be using the multi-arch as I understand the situation. I noticed there is no grub configuration file in the multi-arch netinst ISO when I mounted it and looked around. I also noticed the standard netinst ISO is not easily mountable: there are errors when I try to mount the individual partitions to inspect the grub configuration. Additionally, Kubuntu boots perfectly aside from the keyboard issue. Devuan also boots when I modify the netinst to bypass gummiboot and use grub directly. Finally, the multi-arch grub shell freezes up when autocompleting and searching through the drives for the grub config, leading to a forced reboot. As an extra note, I tried 2 different flash drives and CD install media with the same results.
I tried many, many grub kernel combinations to fix the keyboard issue. It works in grub, but not in Linux. I was ultimately going to try a newer kernel to fix it.I was in a hurry to get something set up so back to the store it goes.
View 1 Replies
View Related
Mar 23, 2009
I downloaded the Full DVD install and burned it using nero. When I reboot to install it loads everything. Though when I try to push a keystroke it doesn't recognize them apparantly and restarts the sytem after a few seconds. Im using an usb keyboard.
View 2 Replies
View Related
Jun 1, 2011
I rebooted my system about a few days ago to find that whenever X was started, my mouse and keyboard would not function. I am unable to even switch to another tty when this occurs, however alt+sysrq+r will allow me to switch ttys again.
Xorg.0.log
[ 70.287]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[code]....
View 11 Replies
View Related
Dec 1, 2010
when I finally wanted to install Debian to my hardrive. Somehow, how to copy it to USB drive and make it boot-able. Installation process started without problems, but it failed on step called (something like) "Find files in CD-ROM" - what was expectable, since I used USB drive. So I wanted to unmount "/cdrom" and mount my USB drive there instead. I moved to another terminal, and searched for right device. "ls /dev" does not help, since I can't scroll to see other devices. Also kernel messages - can't scroll. Tried to change keyboard layout, still didn't work. I also can't use less, because there is no apt-get installed. Another problem is, that after trying to mount only viewable device (/dev/sda1), mount failed bacause I gave there invalid argument, or directory didn't exist. (Note that I created directory in /mnt/... or /media/... first). So I am asking - how can I remap keyboard to use those page up/down keys?
View 12 Replies
View Related
Jun 10, 2010
I've previously installed ubuntu using wubi. But this is the first time I've tried installing it directly on the hard drive. I bought a new 320 gig hard disk and divided into 3 partitions of 50gig for windows 7, 30 gig for ubuntu and and the remaining for data. I installed windows 7 on the 50 gig partition. When I tried to install ubuntu using usb boot device, it says no operating system found and all my hard disk is muddled up and I can't see my partitions.
Now I go into live cd mode and see if I can mount my partitions and there I can see all the partitions. I formatted the 30 gig partition which was previously in NTFS to FAT32 and tried to install ubuntu directly from the live cd into the 30gig partition. But still the installer cannot see either my partitions nor my windows 7.As of now I'm using VMplayer and running ubuntu on a virtual machine. But would really prefer to have it installed on the hard drive to derive its full power.
View 2 Replies
View Related
Feb 23, 2009
I am trying to install Fedora Core 10 64bit on my Desktop... i've been running FC7 on it until now.The installer continues until the Anaconda GUI, and I am able to click next on language select, then when I click to select "U. S. English" as the keyboard layout and press NEXT, the installer hangs. I ran the disk verification at the start and it passed, so can't be a corrupted installation disk.I can move to the other terminals away from the Anaconda GUI Installer, and in one
Code:
INFO: moving (1) to step welcome
INFO: moving (1) to step language
[code]....
View 5 Replies
View Related
Apr 8, 2011
I have installed windows after installing debian. Whenever, I start the system, I dont get debian instead I get only windows.
View 6 Replies
View Related
Dec 27, 2009
I have just update from 11.1 to 11.2 and after reboot system hangs when arrives to the screen where all users logins are showed. I run the installation again in repair mode. Everything correct. Started system again in Level 3, login as one of the users and run startx. It starts the desktop but no keyboard or mouse is working. Started system again in level 3, login as root, started gdm and same results. It arrives to the login screen for the different users and keyboard and mouse does not work. System seems to be running as clock in the right down works.
Started system again in Level 3, login as root, run SaX2 and same results: no keyboard no mouse. I am running gnome desktop with last image downloaded openSUSE-11.2-DVD-i586.iso. it seems to be something related to bug in OpenSuse 11.2 Milestone 7: (Bugs:Most Annoying Bugs 11.2 dev - openSUSE) HAL may crash, leaving XOrg without keyboard and mouse (Bug #537452), work-around: update with 'hal' package from Base:System
View 6 Replies
View Related
Oct 17, 2010
Running Slackware 12.0 (2.6.29.4), performed an entire package update via slapt-get --upgrade, after the upgrade keyboard is not recognizing every keystroke. I have searched the forums for similar issues, but due to the broad verbiage as to how to describe the problem, I have yet to find a solution.
I'd prefer not to have to upgrade to Slackware 13.0 or my kernel. Prior to performing upgrade, keyboard was working as expected. This really puts a damper on things, I type very fast and use the terminal 75% of the time. Having to backspace and retype is getting annoying.
Please, if anyone has any ideas, I am open to suggestions. Thanks.
View 1 Replies
View Related
Mar 3, 2011
Every time I look at firefox (i.e. bring it to the foreground), and when I go back to programs like terminal, GVIM, or pidgin, they won't recognize my keyboard unless I click on some specific thing. For example, I have to click the top of GVIM and pidgin and drag it around a bit, then I can type in those programs. For terminal I have to switch to a different tab and switch back before I can do anything. For some other programs, simply pressing "control-z" to undo will make the program not recognize the keyboard until some action with the mouse is done. This started to happen a few days ago after I tried to install scim to type Chinese (may or may not have any thing to do with it).
View 3 Replies
View Related
Jan 6, 2013
Just re-installed Wheezy to ssd-drive and noticed that everything works much faster than before. For the older install I made some changes to /etc/fstab (I think) which I found from the web. I don't remember exactly what changes.
Question is: what's the situatation with Wheezys beta4-release and ssd-drive? Do I have to edit something at the moment, or does the installer notice ssd-drive and make everything needed?
View 7 Replies
View Related
Mar 24, 2015
I've set up a dual boot system with Debian and Windows 8, both installed on their own drive, with their own boot partition. I installed eveything in UEFI-Mode with fast- and secure boot turned off. Both installations are working, as I can access them by changing the boot priority in the Bios. What I cannot achieve is to let grub boot my windows installation.
This is the output of parted -l:
Code: Select allModel: ATA Samsung SSD 840 (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start  End  Size  File system   Name Flags
 1   1049kB 512MB 511MB  fat32         boot
 2   512MB  111GB 111GB  ext4
 3   111GB  128GB 17,0GB linux-swap(v1)
[Code] ....Â
As you can see, my linux install is on sda, my windows install on sdc (sdb beeing a data disk). This is the entry I made in the 40_custom file in etc/grub.d:
Code: Select allmenuentry "Windows 8.1" {
insmod part_gpt
insmod chain
set root='(hd2,gpt2)'
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
boot
}
I think this should be fine, but if I choose the windows entry wehen grub is booting, it says: error: no such partition. It's my first debian installation, and I am stuck here. Not too much of Linux experience in general.
View 12 Replies
View Related
Jun 15, 2011
I searched the forum about installing the liquorix kernel but I cannot understand why the file /etc/apt/sources.list is not mentioned to invoke the liquorix repository.
Instead, I found: Alternative Performance Kernel for Debian wrote:For anyone interested, just add the following to a sources file (/etc/apt/sources.list.d/liquorix.list): deb [url] or for you scripters, echo "deb [url]
View 2 Replies
View Related
Jun 20, 2015
I already have a Notebook with windows (for some reason it needs 3 partitions..) and wheezy. When I installed wheezy I create 2 logical partition inside a primary one: one logical for /home and the other one for filesystem. Now I would like to overwrite wheezy and get get jessie, but without touching windows and home.
I already try to upgrading and it went wrong, so I prefer overwrite, what I have to do during "manual installation" phase?
View 11 Replies
View Related
Apr 2, 2011
I'm wondering I've read in some places that if people would like to move from a stable branch of Debian to the testing you can usually just replace the lines in sources.list with the testing release and update and then dist-upgrade. Is this true...and if so is it safe?
View 1 Replies
View Related
Jun 9, 2011
I upgraded one of my Squeeze installations to Wheezy, but after selecting it in grub, nothing is displayed on screen: no CLI and no GUI. I tried Ctrl + Alt + F[1-7] and I got nothing. My laptop is Acer Aspire 7715Z. I am attributing this to module as there seems to be disk activity, but without a screen, I cannot be certain.
View 14 Replies
View Related
Nov 9, 2014
I added the following line to my sources.list
Code: Select alldeb [URL] ..... wheezy main non-free
and then after:
Code: Select allapt-get update
I run:
Code: Select allapt-get install nautilus-dropbox
but I got stuck (console freeze) and I had to reboot hoping to sort out somehow...
After reboot I try to apt-get again but I got the following message (my traslation)
Code: Select allE: dpkg was interrupted.
It's necessary to do "sudo dpkg --configure -a" for correcting the problem
So I went in the console again for that command and I get
Code: Select allConfigurazione di nautilus-dropbox (1.4.0-3)...
Dropbox is the easiest way to share and store your files online. [URL] ....
but nothing fruitful seems to happen; and now how to proceed?
View 11 Replies
View Related
Feb 6, 2015
I have a server in which I'm trying to install Debian into. There's no BIOS, only EFI boot. The vendor locked it down so there's no way to see it or get into it.
The Wheezy 7.8 netinst CD has EFI boot parameters and works on everything I throw it in, except this one server. Booting it up, the code doesn't see the EFI and boots into normal mode, negating every chance to install it (dozens upon dozens of failed installs).
During boot, I press the [TAB] at the Debian Linux installer menu and get the load parameters (/install.amd/vmlinuz vga=788 etc). What parameter can I add to this line to get it to run in UEFI mode so we can install it?
View 10 Replies
View Related
