I am having problems creating an diskless fedora 12 workstation. I have my boot server set-up, dhcp works, tftp works, pxelinux.0 gets sent. I have installed fedora12 locally [to hdd from dvd] on the affected workstation and then copied the whole / [root] to my boot server. Then I have installed the dracut-network package and a new kernel. I have copied the /boot/vmlinuz-xxxx and /boot/initramfs-xxxx.img to my bootserver's /var/lib/tftpboot/images/F12-x86_64/vmlinuz and ..../initramfs.img Boot options are listed below (the whole pxe config file):
DEFAULT menu
PROMPT 0
MENU TITLE KBS1 BOOT SERVER
TIMEOUT 200
[code]....
the "deskless" client's ip is set statically to 192.168.0.114. Is there anything I am missing?
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
I installed Fedora 12 and performed the normal updates. Now I can't reboot and get the following console error message.
ERROR: via: wrong # of devices in RAID set "via_cbcff jdief" [1/2] on /dev/sda ERROR: removing inconsistent RAID set "via_cbcff jdief" ERROR: no RAID set found No root device found Boot has failed, sleeping forever.
I have installed Fedora 12 on my HP laptop which has got a NVIDIA graphics card. I have got latest F12 kernel 2.6.32 as well as default kernel 2.6.31.I have installed Nvidia Proprietary Drivers and modified grub.conf file for 2.6.32 kernel saying blacklist nouvaue so that it can load NVIDIA drivers ...After that I am able to successfully boot into 2.6.32 kernel with Nvidia Proprietary Drivers.Everything seems to be fine .. But suddenly today when I tried to boot into F12 2.6.32 kernel I got the following error
Code: No Root Device Found Boot Failed, Sleeping Forever
I had Ubuntu 10.10. Now in the free space remaining in my hard disk, I installed Fedora 15. But unfortunately, Fedora failed to detect ubuntu. Now when I start my computer, grub automatically loads fedora and also doesnt display the boot menu. How can I boot ubuntu and let the grub display a menu of operating system choices?
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
I downloaded fedora 14 64 image then created a bootable flash drive and put the image on the flash drive. I rebooted and tried booting from the flash drive and that's the message I received. What do I do?
I have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.
Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.
First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:
Code:
Is this a bug or can I modify anything to correct this error? How?
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I had a a problem booting last night when my laptop battery came loose and caused a crash during boot.It ceased loading a daemon and I turned it off with the power switch, then I received the boot error,then i checked the linuxdrives directory and it was corrupt,I then, out of ignorance, ran wubi from within windows XP and said unistall believing that it would reinstall and fix itself.Thus you can see my green behaviour.I have been searching the threads and have tried many things but have had no success, I will suffer a great loss if I lose that load of Ubuntu as I have allot of work stored there, and in my Thunderbird accounts.
I was trying to install Ubuntu 10.10 32-bit from the bootable DVD I burned and I've set the priority in the BIOS to CD-ROM and then to Harddisk yet it keeps loading Windows 7 directly without asking me to press a key so I can load from the Ubuntu CD. I used to have 10.04 a few months ago working well so I tried to insert its CD to check and no, it went straight into Win7 although it worked fine just a few months ago.Any help with that? My DVD rom works well inside Win7.
Got a Netbook. No CD drive so mounted image to USB stick and booted into installer from there. Chose the option to upgrade from 10.04 LTS to 11.04 and the installer hung on removing conflicting operating system files. In the end, I was forced to restart as nothing else could be done. Now, it just boots to this:
Quote: error: no argument specified. mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target filesystem doesn't have /sbin/init. No init found. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)Enter 'help' for a list of built-in commands.
I booted to the Live CD and reinstalled Grub which now brings up a list of all the kernels and Memtest but, aside from Memtest, they still all boot to this. I don't have the passphrase for the Home folder (don't even remember encrupting it!) so I tried the ecryptfs method from the live CD to get the passphrase and backup the Home folder and do a new install but there is no trace of .ecryptfs or .Private folder and pretty much everything in the Home folder is locked. Tried an fsck on the hard drive, but nothing. I do remember thinking the hard drive was referred to as hda1, but the live CD shows it as sda1. Don't know if this affects anything. I have a feeling the installer regarded the USB stick as first hard drive and got confused.
I downloaded the 32-bit iso from the Ubuntu website. I followed all of the instruction given on [url]. I went into my BIOS settings and set it to boot from the USB. A black screen came up and first showed me a line of copyright information. On the next line it said "Boot failed: please change disks and press a key to continue". Then on the third line it repeated the same thing "Boot failed: please change disks and press a key to continue".
I'm using a Dell Latitude D610 laptop with Windows XP Media Center Edition Version 2002 Service Pack 2. The USB I'm using is eight gigabytes, was manufactured by Toshiba, and has absolutely nothing on it except for the stuff that needs to be on there to install Ubuntu.
Here is the message I get every time I try to install Debian Squeeze on my computer: Image at: [URL] I have tried multiple cd's and multiple iso's (and the iso's where all different) and the installation always fails at the same place. Here are my specs: Hardware Overview:
Model Name:Power Mac G5 Model Identifier:PowerMac7,3 Processor Name:PowerPC G5 (3.0) Processor Speed:2 GHz Number Of CPUs:2 L2 Cache (per CPU):512 KB Memory:1.5 GB Bus Speed:1 GHz Boot ROM Version:5.2.4f1
I cannot boot into either OS. Grub failed on install. How to boot back in to windows. From live Ubuntu CD I can see that all files are there, however it shows the disk to be unrecognized and unallocated. There is an X by the root folder of my C; drive. Windows recovery console can't fix it, windows install can't fix it, and windows repair can't fix it. I guess I need to reconfigure my boot drive properties to recognize the ntfs; I don't know what to do. I would like to boot back in to windows partition the drive correctly and start over , is this possible?
I am using WUBI to run ubuntu.I upgraded to 10.04 from ubuntu 9 using the update option provided.On restart after the update,i get to grub rescue prompt.Here when i type ls i get the output as hd0 and hd31.I cannot login into windows because the option to select between windows 7 and ubuntu is not available anymore.
I was running 10.10 and I started to upgrade to 11.04 beta2. And while it was in the middle of applying the updates it shutdown on its own. When I went to boot it back up it originally told me something about the drive is unavailable and asked if i wanted to do an automatic or manual recovery. Neither of those worked so created a live cd of 10.10 and it will boot to that with no problem. I did some research and thought that it may be the grub bootloader so i upgraded that to version 1.98 and now all it does is go to a black screen with the prompt "grub>". So my question is what do i do? I would reinstall 10.10 but I cannot loose any of the data that is on the disk.
I upgraded from deb7 to deb8, but am no longer able to boot. After passing the grub boot menu, the following messages are displayed:
Code: Select allLoading, please wait... [ 6.065713] systemd-fsck[148]: /dev/sda1: clean, 428644/1310720 files, 410616 9/52442880 blocks [ 7.480551] Error: Driver 'pcspkr' is already registered, aborting... [ 8.692700] systemd-fsck[341]: /dev/sda5: clean, 145485/6176768 files, 17407409/24695552 blocks [ 18.066215] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead _
The screen then clears and an underscore is displayed as the sole character at the top left position of the screen. The system hangs at this point. During installation, I rejected two changed files: /etc/init.d/bootlogd and /etc/libreoffice/sofficerc. For both, I opted to keep the installed version (the default choice of the installer) rather than replacing with the new version. The first might be related to the problem, although it seems to be responsible only for logging the boot process, and I would not expect this to compromise booting.
In case this information is useful, sda1 is mounted at /, sda2 is swap space, sda3 is extended, and sda5 is a logical partition mounted at /home.
I am able to boot into rescue mode, but other than that the system is not usable. Unfortunately, no useful error messages are given to aid in diagnosing the problem.
My buddy has a computer with a problem and hes asked me to see if I can retrieve the data documents from the computer. The subject computer is a COMPAQ PRESARIO SR5030NX with a Pentium 4 cpu, 3.2 GHz, 1 GB RAM, running Windows Vista Home Basic.
His goal was to create a dual boot computer UBUNTU and Vista. What he did was to install UBUNTU, partitioning the computer in two partitions. The computer is now giving an error code of 21 when GRUB Loader starts up. Is there a restore disk or some kind of utility that can undo what was done to the computer. He has no backup disk.
I tried Recovery Commander Ver. 3 made by Avanquest but as their website indicates it�s for XP. They never updated it for Vista and Windows 7. Is there a utility that can undo some of the changes that were made to the machine when UBUNTU was installed, albeit, unsuccessfully.
(1) I have an HP PC running XP professional and I was wondering if I take the hard drive out from the COMPAQ and rig it to my HP via a SATA/IDE to USB 2.0 Adapter device would I be able to see the contents of that COMPAQ computer that had Vista and now UBUNTU.
(2)What about attaching the COMPAQ internal hard drive and attaching it to my HP as a slave drive.
(3)Can the UBUNTU disk going to help?
Were just after the data files and not software programs.
I have a Mac Mini with OS X that I had dual booted successfully with Windows XP for my family. I am a rookie at all this but learned a lot Googling sites that walked me through things. I got bold and tried to triple boot the Mac Mini with Ubuntu 10.04 using rEfIt. I was following this website. [URL].
MISTAKE #1 All was done to the letter until I accidentally realized I had clicked install on step 8 before I clicked "Advanced" to check off the "Install Boot Loader" and changing the device to the partition I had made for Ubuntu (/dev/sda3/). It finished installing and rebooted with the rEFIt screen with Mac / Ubuntu /Windows icons. Mac started, but both Windows and Ubuntu showed a black screen with blinking underscore in the top left of the screen. I went back to the Mac OS and in Disk Utility I noticed that the Linux-Ubuntu name on the partition I had made changed to "DiskOS3".
Mistake #2 I panicked and used "Erase" in Disk Utility on that partition using the Zero Out Data security Erase option.
Mistake #3 Then I reinstalled the Ubuntu 10.04 cd into the drive and did the install boot loader steps. It started up but the rEFIt screen now has Mac/ two Ubuntu penguins/ and Windows icons. Mac starts and works, but both ubuntu icons and Windows leads to the black screen with blincking underscore cursor.
Here are specs and data for hard drive below: Hardware Overview: Model Name: Mac Mini Model Identifier: Mac Mini3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 3 MB Memory: 2 GB Bus Speed: 1.07 GHz Boot ROM Version: MM31.0081.B06 SMC Version (system): 1.35f0 .....
Recently updated to kernel 2.5.32.11-99 and upon restart, failed to boot. Get stuck at a recovery prompt asking for root password or Ctrl-D to continue (which reboots system). I worked around this problem by reverting to the previous kernel 2.6.32.9-70. From what I can tell, with the newer kernel there is a problem with device enumeration of software raid volumes.
Last night I wanted to test the suspend mode on my laptop (Asus K52J) after I had successfully used hibernation mode, which did not work until I installed the latest kernel update. Unfortunately, it didn't go very well. I had to power off the laptop manually. This morning, I booted up Fedora but it didn't go beyond the blue screen with the logo. It just kept hanging there. I rebooted and tried previous kernel configurations but none of them worked. As a matter of fact, I have to write this from Windows.
This is all rather odd since I tried to suspend before and though it never worked, the fact that I had to power off the laptop manually didn't prevent Fedora from booting. I really hate not being able to use Fedora. It's fortunate that I put all my important data on a separate NTFS partition...
Last time I want to run to fedora(14/64-bit), I faced to an error! I have a screenshot from monitor and attached it here I want to save my data on desktop
I was running Ubuntu 9.04 Desktop on a headless Pentium 4 machine which is our file, mail, web & fax server. The two x 250GB SATA hard disks were in a RAID 1 array with full disk encryption. Ran the 9.10 upgrade via WEBMIN and it failed. I should have known then to copy over everything to a backup disk, but instead I rebooted.
On restart the machine accepted my encryption passphrase but promptly hung with a mountall symbol lookup error - code 127. So I can't start the machine to get at the disks, and using a Live CD is useless as it has no way to open the RAID array to get at the encrypted partitions. Although we have data backed up (as at last night) I'd hoped not to have to rebuild the entire server from scratch. But its looking bad.I have taken one drive out and plugged it into another machine (Hercules), and the partitions show up as /dev/sdb1 /dev/sdb2 /dev/sdb3.
If it weren't for RAID, I could open /dev/sdb2 the main partition) in Disk Utility and enter my encryption passphrase to get access. But RAID adds a layer of obstruction that I have not yet overcome. I used mdadm to scan the above partitions and created the /etc/mdadm.conf file, which I edited to show the 2nd drive as missing (rather than risk corrupting both drives). I activated the RAID array with mdadm, and cat shows:
I've been searching the web for hours but have yet to find someone with a solution to this situation. If anyone has a thought on how to access this disk I'd be pleased to hear from you. In the meantime I will start building a new (9.10) machine from scratch, without RAID, 'cos that's probably going to be necessary.
I have a Dell Inspirion 3500 laptop with the following specs pentium II 266mhz processor floppy drive (registers in BIOS, attached to serial port in back) CD-ROM drive (doesn't registers in BIOS, although is displayed in system intialization prior to boot) 4 GB hard drive (wiped with Darik's Nuke and BOOT floppy disk)
I have tried to boot from all sorts of Windows CD's and Linux CD's. None will boot. So I choose to boot from USB. Since It is such an old laptop I needed to load the USB drivers before booting. SMART BOOT MANAGER failed. PLOP BOOT MANAGER booted to its own menu. It still would not boot to CD. So I tried putting an exact copy of the remix ISO onto a USB and loading it. This failed so I used UNETBOOTIN to extract the ISO to USB. PLOP finally recognized it and loaded the UNETBOOTIN MENU. From there I load the Graphical environment (since the dev said it wont load any other) Then UNETBOOTIN loads the REMIX into the "LIVE ENVIRONMENT" from USB. Once I was in the "LIVE ENVIRONMENT" I right clicked and opened a "TERMINAL EMULATOR" and from there I ran the �sudo ./install.sh� command to install it from the USB stick (dev's instructions). From there it says it can only install to a single blank hard drive of at least 500mb, but it makes no allowance for alternative hardware or software changes. Is it possible that since I have a floppy,cdrom,and usb stick installed during the install that it is causing an error? I choose yes.I enter username , then click yes.Then I choose hostname , and click yes. Now for the final step It says that the drive has partitions or filesystems in place. Here is what it displays
i used to use ubuntu 9.04 on my lap compaq 515, it worked well. But on upgrading to the higher versions(9.10, 10.04) the system failed to boot. Whenever i tried to install, the laptop would freeze and just show a blank screen. The Configuration of my system is below
